Condition: good (used), Code: 0110 Brand: OMS SALVARANI Model: FC 350 R - CE Standard Crosscutting machine with base frame for wood, aluminium, PVC, plastic, etc. - CE Standard Technical data Blade diameter mm 350 Three-phase motor Watt 2800 - Rpm 3000 Cebu S Ucowhffzsysgt Cutting capacity height mm 145 Cutting capacity width at 45 degrees mm 113 Cutting capacity width at 90 degrees mm 160 Base complete with suction Overall dimensions mm 800 x 600 x 1500 h Weight kg 90

Condition: new, overall weight: 36,000 kg, empty load weight: 7,810 kg, axle configuration: 3 axles, suspension: air, tire size: 385/65 R22,5, Equipment: ABS, | Knapen K100 new vehicle 92m³ | Lashing eyes 13pcs. | 8mm floor | BPW axles | Lift axle | 2x toolbox | 2x work lights | 92m³ | Hydraulic connections mounted on the support legs including mounted hose guide | Ladder on side protection | Errors, input and advance sales reserved. Csbuevnmhrs S Ucyogt

Condition: excellent (used), Year of construction: 1985, Functionality: fully functional, Press force: 4,000 kN Cebu Sswhd S Te Ucyjgt Table: 1,800 x 1,550 mm (5 steps of 300 mm) Ram: 1,800 x 1,350 mm Ram adjustment: 200 mm Ram stroke: 250 mm Max. installation height: 600 mm (tool height should be 590 +/- 5 mm) Min. installation height: 400 mm Coil inlet height: 300 mm Transport height: 300 mm Table equipment: Die cushions: 5 individually adjustable, uncontrolled Die cushion force: 120 kN at 16.0 bar Die cushion travel: 120 mm Ram equipment: 5 individually adjustable, uncontrolled Ejector force: 80 kN at 16.0 bar Ejector travel: 120 mm Upstream Coiling system Maximum coil width: 500 mm (450 mm) Maximum coil thickness: 3.5 mm Material cross-section: 1200 mm² for the straightening system Maximum coil weight: 6000 kg Gripper system: 5 between the stages

Condition: used, Year of construction: 2017, Edgeband thickness max: 5 mm Panel thickness max: 50 mm Thickness of coiled edgeband max: 3 mm Workpiece length min: 190 mm Workpiece width min: 65 mm Feedrate max: 7 m/min Glue system granulate: glue pot below feeding chain Trimming saw: 1 motor Flush/radius/chamfer milling units: 1 Scraper unit: Profile scraper Type: right-side machine Machine length: 2.600 mm Conformity marking: CE mark Cgobu Sjwaldhj Ucyjt

Condition: excellent (used), Year of construction: 2008, operating hours: 3,733 h, power: 42 kW (57.10 HP), lifting height: 13,100 mm, empty load weight: 7,252 kg, Genie GS 4390 RT Scissor Lift/13.1m • Manufacturer: Genie • Type: GS 4390 RT • Year of manufacture: 2008 • Operating hours: 3733h • Weight: 7,252kg • Power: 42kW • 4-point outriggers • Max. working height: 13.1m • Lifting capacity: 680kg-1,286kg • Hydraulic control • Last accident prevention inspection: October 18, 2024 • Documents: Annual accident prevention inspection reports, EU confirmation declaration • German machine Cjbswamgksu S Ucyegt • Ready for immediate use _____ You can also have the description in another language by email • Our services • • - Export declaration - Customs registration - Yellow temporary license plates - Red customs license plates. • - Purchase of your used construction equipment or commercial vehicle • - We help with financing • - We offer transport solutions • - Inspection and demonstration of the machines from Monday to Friday, 9:00 a.m. to 5:00 p.m. (Saturdays by appointment only) • • Our machine pool is constantly evolving and is always up-to-date on our website. • This offer is non-binding and subject to change. - Subject to prior sale. - Errors and/or typos are not excluded. - Sales subject to our terms and conditions.

Condition: good (used), Remark: The crash barriers may show scratches, slight dents dents or other damage. Included in delivery is: 01x crash barrier, used material color: yellow/black execution: full-walled total length: approx. 2.700 mm clear width: approx. 2.505 mm total depth: approx. 240 mm total height: approx. 410 mm material thickness: approx. 4,00 mm Number of drill holes: 08 pcs. Drill hole Ø: approx. 18 mm Cgjbu S Ucenwmn Hoyst Weight | pc: approx. 52,840 kg Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This article is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: used, overall weight: 45,000 kg, maximum load weight: 30,350 kg, axle configuration: 2 axles, loading space length: 12,500 mm, loading space width: 2,550 mm, loading space height: 300 mm, first registration: 06/2024, next inspection (TÜV): 06/2025, Year of construction: 2024, total width: 2,550 mm, total height: 300 mm, Equipment: ABS, DOLL tera 2-axle low bed semi-trailer removable neck and additionally driveable rear carriage first registered 06/ 2024, in new condition empty weight 14,650 kg total permissible weight 45,000 kg length of gooseneck 3,070 mm fifth wheel height 1,200 to 1,280 mm swing radius 2,350 mm length of low bed 6,800 mm length of telescoping 5,700 mm length of rear axle chassis 2,700 mm width of excavator arm trough 700 mm depth of excavator arm trough 550 mm loading height of low bed 300 mm loading height above the chassis 955 mm width of the trailer 2,550 mm hydraulic suspension -70 / + 530 mm Fifth wheel load technical 21,000 kg Axle load 24,000 kg Removable gooseneck with external main frame Trailer painted in 3 layers including spray galvanization Doll Tronic CAN bus system Floor in the low bed 45 mm spruce wooden planks between the flat bed frames 24-volt electric hydraulics Control of the trailer functions with DOLL keypads on the gooseneck ADDITIONAL STEERING with RADIO EEG Electronic tracking when driving straight ahead At the rear of the frame aluminum folding ramps with lifting mechanism, length 2,100 mm, width 600 mm, mechanical width adjustment, load capacity 20,000 kg LaSi in the low bed: 7 pairs of swiveling lashing eyes 13,400 daN lashing force 5 pairs of stake pockets in the outer frame 3 pairs of M36 threads on the outside for screwing in lashing brackets Chassis DOLL tera pendulum axles with hydraulically suspended axles BPW all axles hydraulically forced steered with max. 60° steering angle on the last axle Cgebu S Ucswhd Emeyot all lubrication points are connected to the central lubrication system WABCO trailer EBS with ABS and RSS aluminum air tank BEKA MAX central lubrication system on the front and rear of the vehicle extra-wide package with foldable loading area extensions 2x 225 mm, warning sign package extendable to 3,200 mm wide tires 8-fold 245/70 R 17.5 RENTING is the new BUYING, immediately available from us in full-service rental-----

Condition: used, mileage: 200,370 km, power: 390 kW (530.25 HP), first registration: 04/2022, overall weight: 26,000 kg, fuel type: diesel, axle configuration: 3 axles, maximum load weight: 13,393 kg, empty load weight: 12,532 kg, tire size: 315/80 R22,5, wheelbase: 4,800 mm, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, number of beds: 1, Equipment: ABS, air conditioning, central locking, compressed air brake, crane, cruise control, differential lock, had accident, onboard computer, parking heater, sleeping cabin, truck registration, | Mercedes Actros 3353 6x4 timber transporter | Palfinger Epsilon M12Z105 crane | Retarder, air conditioning | Refrigerator, heated seats, auxiliary heating | Multifunction steering wheel, cruise control | Electric windows, sunroof, trailer coupling | Very good condition | Loading length approx. 6.80m | Wheelbase: 4800/13500 | 4 stanchions | Subject to errors, input errors and pre-sales. Csbu S Ucovzrrveysgt

Condition: good (used), Threaded rod, threaded bolt, threaded rod according to DIN 975 Csbu Secd Emyj Ucyegt -Diameter: M24 -Threaded rod: galvanized -Quality: 4.8 -189 pieces Length: 2000 mm -piece price: 20 EUR net -19 pieces Length: 3000 mm -piece price: 25 EUR net

Condition: excellent (used), Working width: 500 mm 4-knife cutterhead Table length: 2690 mm Fence with angle adjustment Cgebuewhdvxo S Ucyst Star-delta start

Condition: excellent (used), Year of construction: 2008, operating hours: 3,029 h, power: 42 kW (57.10 HP), lifting height: 13,100 mm, empty load weight: 7,252 kg, Genie GS 4390 RT Scissor Lift/13.1m • Manufacturer: Genie • Type: GS 4390 RT • Year of manufacture: 2008 • Operating hours: 3029h • Weight: 7,252kg • Power: 42kW • 4-point outriggers • Max. working height: 13.1m • Lifting capacity: 680kg-1,286kg • Hydraulic control • Last accident prevention inspection: July 29, 2024 • Documents: Annual accident prevention inspection reports, EU confirmation declaration • German machine • Ready for immediate use _____ You can also have the description in another language by email • Our services • • - Export declaration - Customs registration - Yellow temporary license plates - Red customs license plates. • - Purchase of your used construction equipment or commercial vehicle • - We help with financing Cjbu S Ucewamf Teysgt • - We offer transport solutions • - Inspection and demonstration of the machines from Monday to Friday, 9:00 a.m. to 5:00 p.m. (Saturdays by appointment only) • • Our machine pool is constantly evolving and is always up-to-date on our website. • This offer is non-binding and subject to change. - Subject to prior sale. - Errors and/or typos are not excluded. - Sales subject to our terms and conditions.

Condition: excellent (used), Year of construction: 1989, Functionality: fully functional, Weiler Commodor 3-axis lathe with feed and spindle drive and digital readout from K&C, NEW, excellent condition! Technical specifications: >> Year of manufacture 1989 Machine no. 89-2633 >> Center height 180 mm >> Center width 1000 mm >> Spindle speeds: from 45 to 2000 rpm >> Spindle bore 56 mm >> Short-taper spindle head DIN 55027 size 6 with bayonet lock >> Tailstock MT 4 >> Feed rates from 0.026 to 0.888 mm/rev >> Possible thread sizes: metric, inch, module, and diametrical pitch >> Metric thread pitches from 0.35 to 12 mm >> Weight approx. 2000 kg >> Spindle brake can be switched on >> Drive power 7.5 kW >> Length 2.2 m, height 1.5 m, depth 1 m Accessories and equipment: >> 3 New K&C 3-axis digital readout, 12-month manufacturer's warranty with instruction manual. Functions: mm/inch switching, ABS/INC coordinate selection, display value halving, reference mark, 200-piece tool programming, taper calculation, radius/diameter, quick zeroing, counting direction reversal, >> New 200mm three-jaw chuck with 2 sets of jaws >> Multifix size B with 2 tool holders >> Electronic spindle protection Cgebujwhd E Ho S Ucyet >> Coolant system >> Multi-stop About the machine: Offered is a Weiler Commodor center lathe in very good condition. The machine is fully functional. The spindles run smoothly with little crank play. The machine has been completely disassembled and repainted. A very robust and powerful machine. The new 3-axis digital readout from K&C makes working even easier and more precise. The machine has undergone electrical and mechanical testing at our facility. A complete oil change has been performed. This newer generation of Weiler lathes is very user-friendly. Take advantage of the opportunity to view and test this machine live on-site.

Condition: used, overall weight: 42,000 kg, maximum load weight: 33,083 kg, axle configuration: 3 axles, loading space length: 12,680 mm, loading space width: 2,400 mm, loading space height: 2,434 mm, loading space volume: 74 m³, first registration: 10/2021, next inspection (TÜV): 10/2025, Year of construction: 2021, total width: 2,550 mm, total height: 3,810 mm, Equipment: ABS, STAS 3-axle HardoX steel tipper 74 m³ First registration 10/ 2021, from 1st hand Dimensions in length (LxWxH) 12,680 x 2,330/ 2,430 x 2,434 mm (conical design) Unladen weight 8,917 kg Floor in 5 mm HardoX steel HB450 throughout End wall and side walls in 3 mm HardoX steel HB450 Straight front wall, interior with access ladder Rear portal doors 50:50, pneumatic rear release Reinforced roll-up roof tarpaulin HYVA tipping ram type Alpha, low pressure 2x pneumatic vibrators JOST cranked saddle supports, full load SAF axles with large disc brakes, 430 mm 1st axle LIFTACHSE WABCO Trailer EBS with skid protection RSS WABCO Smartboard new model Lifting and lowering device Automatic tilt lowering 6-wheel 385/55 R 22.5 tires ALCOA Dura-Bright high-gloss aluminum rims Aluminum leaning ladder Shovel and broom holder Tool box left 4x LED reversing lights RENTING is the new BUYING, also available from us immediately as a full-service rental Cgjbujwhd Ete S Ucyst -----

Condition: good (used), Year of construction: 2012, Ref. -No.: 10537 Manufacturer: HELLER Type: H 4000 Year of construction: 2012 Type of control: CNC Control: FANUC 31i Storage location: Halberstadt Country of origin: Germany X-Travel: 800 mm Y-Travel: 800 mm Z-Travel: 800 mm B-Axis: 360 ° Table Dimensions (Lengthxwidth): 500 x 630 mm Table Load: 1.400 kg Max. Tool Length: 410 mm Max. Tool Diameter: 188 mm Max. Size Of Workpiece Lxwxh: 900 x 1000 mm Tool Taper: HSK 63A Tool Piece Magazine With: 489 Pcs./pcs. Cgobuswhdzbe S Ucyjt Spindle Speed: 16.000 RPM Max. Torque: 180 Nm Rapid Travel X/Y/Z: 90.000 mm / min pallet change time: 200 s Further information: These are 2x HELLER 4000 incl. FASTEMS SYSTEMS with 32 pallets. Machines are currently in production and can be viewed by appointment.

Condition: new, Technical specifications: Drilling capacity in steel: 40 mm Tapping capacity: M 20 Spindle: MT 3 Thrust: 260 mm Speeds: (12) 55 - 2520 rpm Quill stroke: 130 mm Table size: 585 x 190 mm X travel: 380 mm Y travel: 190 mm Column diameter: 115 mm Motor power: 2.2 kW Cebuewhd Afe S Ucysgt Weight, approx.: 300 kg Equipment: - Cross table - Thread tightening spindle - Thread cutting device - Rotatable table - Height-adjustable protective cover - Spindle guard with limit switch

Condition: excellent (used), Functionality: fully functional, overall weight: 10,600 kg, Shelf length 3700mm Shelf width 1300mm Water heating 10 hydraulic cylinders Piston diameter 100mm Clearance between shelves 260mm Weight - 10600kg Maximum pressure 200 BAR Cgjbu Sowhduzo Ucyst Ability to work on 6 or 10 pistons Possibility of dismantling the middle shelf (Clearance 570mm)

Condition: excellent (used), Functionality: fully functional, power: 120 kW (163.15 HP), overall weight: 24,700 kg, chain condition: 85 %, Year of construction: 2017, operating hours: 12,247 h, Equipment: additional headlights, air conditioning, cabin, gripper hydraulics, hammer hydraulics, hydraulics, standard shovel, LIEBHERR R924 LC ZSA/additional hydraulics/Oilquick SW/2017 Cgsbu S Ucovxtx Sjyst • Manufacturer: LIEBHERR • Type: R924 LC • Year of manufacture: 2017 • Operating hours: 12,247h • Weight: 24,700kg • Power: 120kw/163hp • Mono boom • Central lubrication system • Additional hydraulics hammer grabber • Additional headlights • Demolition grid • All-round view cameras • 85% chain condition • Air conditioning • Seat heating • German machine • Ready for immediate use You can also have the description in another language by email • Our service • • - Export declaration-customs registration-yellow short-term license plates-red customs license plates. • - Purchase of your used construction machine or commercial vehicle • - we help you with financing • - we offer you transport solutions • - Inspection and demonstration of the machines from Monday to Friday 9 a.m. to 5 p.m. (Saturdays only by appointment.) • • Our pool of machines is constantly changing and is always up to date on our website • • • we are also happy to help you by phone • • Sanisa GmbH • Otto Hahn Straße 13 • 35510 Butzbach • • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typos not excluded. - Sale subject to our terms and conditions.

Condition: used, overall weight: 39,000 kg, maximum load weight: 32,000 kg, axle configuration: 3 axles, loading space volume: 32 m³, first registration: 02/2024, next inspection (TÜV): 02/2026, Year of construction: 2024, total width: 2,550 mm, total height: 3,600 mm, Equipment: ABS, KÄSSBOHRER 3-axle stainless steel tank trailer 32 cbm, PRESSURE TANK 2 bar for transporting amniotic fluid, food waste, slaughterhouse waste, blood, liquid manure, fermentation substrate, seepage water, etc. First registration Empty weight approx. 7 t. Tank V2A stainless steel 1.4541, AISI 321 Pressure tank, test pressure 2 bar Insulation mineral wool, jacket sheets aluminum, end floors GRP Cgjbusvw Tz Rj S Ucyot 4x baffles Flushing line in 4" through the entire tank 1x dome cover DN500 with large platform and railing on both sides of the tank Swivel outlet at the rear in 6" with Perrot quick coupling and blow-down device All slides with pneumatic control, safety circuit BÖRGER rotary piston pump, type FL1036 MIP, output 6,000 liters/min., with exchangeable housing shells Automatic pump shutdown Liquifant 6x LED work lights BPW axles with large disc brakes, 430 mm WABCO trailer EBS with RSS anti-skid protection WABCO OptiTurn system for reducing the turning radius when driving forwards and backwards 1st axle LIFT AXLE Tires 6-fold 385/65 R 22.5 ALCOA alloy wheels Toolbox rear left Aluminum hose tray right approx. 6 meters long RENTING is the new BUYING, also available immediately from us in full-service rental-----

Condition: excellent (used), Year of construction: 2001, working width 410mm tables lenght 2630mm Cebu S Ucohqrxmsyogt 4-knives shaft motor with brake horizontal drill included drill table 250x570mm year 2001

Condition: excellent (used), power: 120 kW (163.15 HP), overall weight: 25,000 kg, Year of construction: 2017, Equipment: air conditioning, cabin, hammer hydraulics, hydraulics, LIEBHERR R924 LC ZSA/Auxiliary Hydraulics/Air Conditioning/2017 • Manufacturer: LIEBHERR • Type: R924 LC • Year of Manufacture: 2017 • Operating Hours: 13,376h • Weight: 25,000kg • Power: 120kW/163hp • Hydraulic slewing ring bushing NEW from Liebherr Cgebu S Ujv U A R Nocyjt • Newly sealed by Liebherr • Hydraulic pump NEW from Liebherr • Hydraulic pump finely adjusted NEW from Liebherr • Particle filter NEW from Liebherr • Valves NEWly adjusted • Oilquick quick coupler • Mono boom • Central lubrication system • Auxiliary hydraulics hammer grapple • Auxiliary headlights • Cab protection • Panoramic view cameras • 85% track condition • Air conditioning • Heated seats • German machine • Ready for immediate use _____ You can also have the description in another language by Email • Our Services • • - Export declaration, customs registration, yellow temporary license plates, red customs license plates. • - Purchase of your used construction machinery or commercial vehicle • - We help with financing • - We offer transport solutions • - Inspection and demonstration of the machines from Monday to Friday, 9:00 a.m. to 5:00 p.m. (Saturdays by appointment only) • • Our machine pool is constantly changing and is always up-to-date on our website. • This offer is non-binding and subject to change. - Subject to prior sale. - Errors and/or typos not excluded. - Sales subject to our terms and conditions.

Condition: used, overall weight: 38,000 kg, maximum load weight: 30,000 kg, axle configuration: 3 axles, loading space length: 12,000 mm, loading space width: 2,480 mm, loading space height: 2,445 mm, loading space volume: 70 m³, first registration: 08/2019, next inspection (TÜV): 01/2026, Year of construction: 2019, total width: 2,550 mm, total height: 3,950 mm, Equipment: ABS, H&W (Vreden) AGRAR- Walkingfloor 70 cbm in full equipment First registered 08/ 2019, from 1st hand Dimensions i.L. (LxWxH) 12,000 x 2,480 x 2,323/ 2,566 mm (conical design) Fifth wheel height 1,250 to 1,300 mm Total height 3,950 mm SAF axles "Off-Road" with large disc brakes 430 mm WABCO trailer EBS with RSS stability program Chassis fine-grain steel, hot-dip galvanized Forced steering 1st and 3rd axle, TRIDEC system with rod steering 3x central lubrication points set on the outside Tires 445/65 R 22.5 (also available with field tires/low-pressure tires) Cargo floor AGRAR with 15-board system, reinforced version 10 mm RADIO remote control floor and rear wall flap Profile joints of the side walls completely welded from the inside (grain version) 2x reinforced crossbars Stainless steel wear plate at the rear under the floorboards Front wall with cleaning door Hydraulic connections on the front wall and also on the support legs Cgebu S Ucswhd Eysyjt HYDRAULIC REAR WALL FLAP, controlled via the radio remote control PNEUMATIC PARTITION POSITIONER RENTING is the new BUYING, ALSO immediately available from us in full-service rental-----

Condition: excellent (used), working width 530mm 4-knives shaft Tersa tables length 2730mm angle regulation of fence motor power 4kW Csbu S Ucohqrxfjyogt CE

Condition: excellent (used), power: 14.71 kW (20.00 HP), overall weight: 2,029 kg, Year of construction: 2008, operating hours: 3,351 h, CAT 301.8 trench cleaning bucket/hydraulic connections/manual SW • Manufacturer: CAT • Type: 301.8 • Year of manufacture: 2008 • Operating hours: 3351h Cgebu S Uov Hzibocyjt • Weight: 2,029kg • Power: 15.7kw/20hp • Hydraulic connections • Quick change: Manual • Trench cleaning bucket • Dozer blade • German machine • Ready for immediate use You can also have the description in another language by email • Our service • • - Export declaration-customs registration-yellow short-term license plates-red customs license plates. • - Purchase of your used construction machine or commercial vehicle • - we help you with financing • - we offer you transport solutions • - Inspection and demonstration of the machines from Monday to Friday 9 a.m. to 5 p.m. (Saturdays by appointment only.) • • Our pool of machines is constantly changing and is always up to date on our website • We are also happy to be available to you by phone • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typos not excluded. - Sale subject to our terms and conditions.

Condition: excellent (used), Year of construction: 2008, working width 510mm 4-knives shaft Cgjbuoh R S Uzo S Ucyjt tables length 2250mm motor power 7,35kW angle regulated fence year 2008 iron cast tables

Condition: excellent (used), Functionality: fully functional, power: 268 kW (364.38 HP), fuel type: diesel, overall weight: 35,500 kg, digging bucket width: 3,450 mm, Year of construction: 2011, operating hours: 9,174 h, Equipment: air conditioning, cabin, HITACHI ZW 370/ 9174h/Air Conditioning • Manufacturer: HITACHI • Type: ZW 370 • Year of Manufacture: 2011 • Operating Hours: 9,174h • Weight: 35,500kg • Power: 268kW / 364hp • Articulated Boom • Bucket with Teeth • Air Conditioning • Additional Headlights • Tires: 29.5R25 • Engine: - Cummins - Engine Type: QSX 15 - Displacement: 14.95l • Transport: - 9.28m Length - 3.6m Width - 3.76m Height • German Machine • Ready for Immediate Use You can also have the description in another language by email • Our Services • • - Export Declaration - Customs Registration - Yellow Temporary License Plate - Red Customs License Plate. • - Purchase of your used construction equipment or commercial vehicle • - We help with financing • - We offer transport solutions Cgsbjvw S Rdou S Ucyjt • - Inspection and demonstration of the machines from Monday to Friday, 9:00 a.m. to 5:00 p.m. (Saturdays by appointment only) • • Our machine pool is constantly evolving and is always up-to-date on our website • • • We are also happy to assist you by phone • • Sanisa GmbH • Otto Hahn Straße 13 • 35510 Butzbach • • This offer is non-binding and subject to change. - Subject to prior sale. - Errors and/or typos are not excluded. - Sales subject to our terms and conditions.