Condition: good (used), Year of construction: 2008, machine/vehicle number: 0-260-20-1170, Kantfräs & kap Brandt Type: Optimat FTK 130 No: 0-260-20-1170 Year: 2008 The FTK 130 has been conceived as complementary to edge banding machines. The main application of the FTK 130 is shaped workpieces, where internal as well as external radie can be processed. Also straight workpieces can be easily processed. Shaped workpiece trimming technology For small shops the FTK 130 is offering a flexible and cost effectiv solution for their trimming requirements. In order to process internal and external shapes, the trimming motors are mountedvertically. Cslqsq Ehpao I Uc Ujgt Milling and cutting units for simultaneous upper and lower radius/clean milling of excess edging material on workpieces with straight edges and on rounded workpieces with internal and outside radie. Cutting unit to precisely cut excess front and back edge trim material. in the longitudinal direction of the working pressure. Techn info: Milling unit Workpiece thickness approx. 12-55mm Workpiece width min approx. 30mm Inner radius min.ca.35mm Edging thickness max. approx. 3mm Milling tool 2xWPL radius cutter r=3, diameter 67x21x16mm Milling motors 11000v/min Cutting unit Workpiece thickness 12-55mm The thickness of the edging material max. 3mm Saw blade diameter 100mm Sawing width 3mm Center hole 36mm Compressed air 6 bar, connection 1/2", approx. 2000PA Air consumption per stroke approx. 10NL Extraction power diameter 80mm, 510m3/h, air speed 28m/sec Current 400 volts, 2.5kw 50 hz, 3 phase, 16A Dimensions: 1130x765x1480mm (lxwxh) Weight 320 Kg Stock no: 2001877BXA

Condition: ready for operation (used), Year of construction: 2004, Brand: Translyft Model: TLH 2000 Asp Machine no: 04019918 Year of manufacture: 2004 Can be driven on rails. Cgelq I Uork Nvhec Uet Tech data: Work table size: 2600x630mm Max 2000kg Minimum submerged height: 260mm Max lifting height: 1100mm Lifting movement: 820mm Roller conveyor demountable Max bar: 150 Electronic hydraulic up and down of lifting table Dimension rolls: 600x70mm Motor: 0.75Kw, 50Hz, 380V, 3-phase Machine size (lxwxh): 260x63x260 cm Weight: 320kg Stock no: 2002023BXA

Condition: ready for operation (used), Year of construction: 2002, Brand: Felder Modell: FS2200 Year of manufacture: 2002 With sanding shoe in good condition Driven left and right Colq I Ucoth R Tlo Uogt Tech. info: Work table size: 2200x800 mm Wheel diameter: 250 mm Band width: 150 mm Belt length: 6200 mm Chip nozzle: 160 mm Motor: 4 kW, 50 Hz, 380V, 3-phase Size for transport: 320x110x145 cm Stock no: 2002056

Condition: like new (used), Year of construction: 2022, Brand: Salvamac Model: Classic 50/Salvastop 5.4m Year model: 2022 Tech data Fast cutting saw: Output path 4+2m Blade diameter: 500mm Spindle rotation speed: 2800v/min Table height: 900mm Cutting time adjustable from the outside of the machine The movement of the blade is pneumatic Air pressure: 6-8bar Variable setting of blade speed Cgelq I Ucotxmnqs Uot Engine: 5.5 Kw (7.5 HP) Tech data Salvastop: Working length 5.4m total length 6m Arm/pusher 600x200x100mm Capacity up to 100 kg Servo drive motor 11 Nm Current 230 volts 50 Hz 1 phase Salvamac Trolleybag 2: Powerful chip extractor built from galvanized sheet. Collection bag in PVC diam 500mm and 2x1250x500 mm filters in Cotton. Steel fan blade The machine is wheeled. Tech data: Collection bag 2 pcs diameter 500mm Filter 2 pcs diam.500mm H=1200mm 3 Hk (2.2Kw) 400V 3-phase Start/stop unit with motor protection mounted on the motor cover Instos 200 mm in diam Airflow 2950m3/h Size: 1730x580x2460 Wheel wonder Stock no: 2002123

Condition: good (used), Brand: Rema Colq I Ucoqwlddj Ujgt Model: Classic Tech. info: Max working width: 240 mm Blade diameter: 350 mm Adjustable blade speed Two pneumatic pressure units Diameter of dust nozzle: 125 mm Machine dimension: 900x800x1250 mm In feeding roller conveyor: 2700 mm Out feeding roller conveyor: 2000 mm 3 stoppers Size for transport: 120x80x140 cm Weight: 360 kg Stock no: 2001862

Condition: ready for operation (used), Year of construction: 1981, Functionality: fully functional, Brand: DMC Model: Europa 90 Year of manufacture: 1981 Tech. info: Roller abrasive belt motor: 15 HP - 2 poles Pad abrasive belt motor: 7,5 HP - 2 poles Conveyor belt motor: 1,5/0,8 - 4/8 poles Two feeding speeds: 7-14 m/min Roller abrasive belt speed: 21 m/sec Pad abrasive belt speed: 10 m/sec Roller abrasive belt length: 2200 mm Pad abrasive belt length: 2200 mm Roller and pad abrasive belt width: 950 mm Max. size of work-piece: 900 x ≠100 x > 200 mm Min. size of work-piece: 40 x ≠ 2 x 200 mm Min. operating pressure: 5,5 Atm Compressed air consumption: 300 l/min Diameter of suction hood (roller belt): 200 mm Diameter of suction hood (pad belt): 200 mm Average speed of dust exhaust system: 25-30 m/sec volume of sucked air (roller belt hood): 3150 cu.m/h Volume of sucked air (pad belt hood): 3150 cu.m/h Overall size: 1675x1625xh=2096 mm Weight: 2030 kg Weight of the machine without pad: 1630 kg Stock no: 2001933 Cgolqsrbyrps I Uc Ujt

Condition: ready for operation (used), Year of construction: 1986, Brand: Hansen & Hundebol Cslqsrfxr Hj I Uc Uegt Model: 300/AUT1000 Year model: 1986 Tech. info: Working width: 1040 mm Max brushing height: 100 mm Work table length: 1720 mm Brushing roller: diameter: 180 mm Shaft length: 255 mm Shaft diameter: 33 mm Manual adjustment of work table Main motor: 4 kW, 50 Hz, 380V, 3-phase Stock no: 2001993

Condition: ready for operation (used), Newly renovated knife roller conveyor, new chains and gears. Size: 1300x2600 mm Stock no: 99 Cgslqerpkz Ee I Uc Uot

Condition: ready for operation (used), Brand: Bacci Cgjlqjtu Ivns I Uc Uet Model: Brevettata SM 787 The work table can be tilted and is adjustable in height. Motor: 2.2 kW, 50 Hz, 380 V, 3-phase Size for transport: 160x120x145 cm (lxwxh) Weight: 800 kg Stock no: 2002057

Condition: good (used), Year of construction: 2002, Functionality: fully functional, Nailing machine Brand: LG Machine (Swedish) Year: 2002 Assembly nailing machine full automatick, high cpacity, stacking output. Normal wear, chains and sprockets changed a couple of years ago Cjlqsua A T Aj I Uc Usgt Techn info: Capacity pallet 800x1200mm approx. 600/day Dimensions of finished pallet Min-max: 60x80mm, 120x160mm Thickness of boards: 16,19,22,25mm Width of wood plank min-max 70-150mm Number of nail pipes 6, mechanical Loose nail dimension 80, 90 mm Saw machine (4 saw blades) for cutting the corners Total dimension/set up approx: 15x7m Price: ask for offer

Condition: ready for operation (used), Year of construction: 2007, Edgebander Brandt: Brandt Type: KDF660 Serie nr: 0-261-08-0484 Year: 2007 Return system Brandt: Ligmatech Type: ZHR 01/R/065 Serie no: 0-305-10-1299 Year: 2007 Edgebander equipped with:Pre-routers, cutting units, fine trimmers, radious trimmers, rounding units, scrapers, buffing, release agent, return system Technical info edgebander: Cjlq I Uevwkrgjc Usgt Edging thickness: 0.4 - 12 mm Scissors: max. 3 x 45 mm resp. 0,8 x 65 mm Workpiece thickness: 8 - 60 mm Feed speed: approx. 16 m/min. When selecting form cutters, the feed rate is automatically switched to 11 m/min. Electrical connection: Power 400 volt, 50 Hz, 3 phase 18.4kw, 35AMP Compressed air connection: 6 bar Connection power: approx. 15 kW Machine length: 6 360 mm Technical info return system: Machine length: 6 355 mm Working side: Right Working height: 810 to 950 mm +/- 30 mm Stock no: 2002414BXM

Year of construction: 2001, Condition: like new (used), Roller coater Brand:Sorbini Type:T/20-MF No:MR1RFF21488 Year:2001 The T20 roller coater has been designed as an addition to SORBINI´S extended line of products. The machine is used for finishing flat boards in general with various types of coating products (e.g.polyurethane, polyester, acrylic and water-based finishes) The modular design makes it possible to obtain a wide range of applications which cater for all specific user requirements. Techn info: Working width max 1300mm Colq Ijfw Nc Uj Uc Uegt Thickness of workpiece 0-80mm Feeding speed 3-20 m/min Feeding motor0,737kw Doctor roller motor 0,75kw Applicator roller motor 0,75kw Doctor roller diameter 174mm Applicator roller diameter 248mm Working hight 80 till 950mm Compressed air requirements 6 bar 9l/min Air pump pressure 2-10bar Air pump capacity at max pressure 30l/min of 10 bar Dimension 950x2550x1450mm (lengthxwidthxhight) Total weight 1220Kg Stock no:104326BXA

Condition: like new (used), Brand:Waco Type:KS300 Complete cutting line Waco with 3 electropneumatic lengtstopper in and out feeding conveyor 3+2meter Techn info: Max saw balde 400mm Cgelqoh Ek N Ao I Uc Uot Max cutting hight 70mm Motor 5,5kw, 400 volt, 50 Hz, 3 phase Electropneumatisc control of saw blade and length stopper, Stock no:2000596 Size for transport: Saw 120x105x215cm (lxwxh) Conveyors:300x80x35cm Total weightt:350 Kg

Condition: good (used), Year of construction: 2005, Brand: Hebrock Model: HFF 08 Machine no: 08/379 Year model: 2005 Edge cutter for simultaneous upper and lower radius/clean milling of excess edging material on workpieces with straight edges and on rounded workpieces with internal and outside radii. Tech data: Max edging thickness: approx. 3mm Max workpiece height: 50mm Inner radius min: 40mm Milling motor: 12000 Rpm Work table height: 865mm Cgslq I Ucjq H Spvo Uot Max 6 bar Chipboard: 120mm Milling motor: 0.37Kw Motor: 1.5Kw, 50Hz, 400V 3-phase Stock no: 2001922

Condition: ready for operation (used), Year of construction: 1983, Brand: Weinig Model: U 17 A Machine no: 1387-2940 Year of manufacture: 1983 Cgslevydwzeq I Uc Ust Working height: 1700 mm Working width: 1200 mm 7 spindles in order: Below (4 kW, 5.5 hp), Right (4 kW, 5.5 hp), Left (5.5 kW, 7 hp), Right (4 kW, 5.5 hp), Above (5.5 kW, 7 hp), Under (4 kW, 5.5 hp), Universal (5.5 kW, 7 hp) 40 mm spindles Tiltable feeding-unit Variable feed speed: 6-36 m/min Switch for the security fence Infeed path for planer Brand: Sacot Length: 4000 mm Width: 200 mm Output table Length: 3500 mm Width: 200 mm Lifting table Length: 2350 mm Width: 1200 mm Stock no: 2002037BXM

Condition: ready for operation (used), Year of construction: 2006, Description of the product Brand: Costa Model: TRITT1350 Serial no: A60314LL1 Year of manufacture: 2006 Cgjljv Hfdvoq I Uc Uet Stock number: 2002440BXA Technical data Working width: 1350 mm Sanding belt size:1380x2620mm Power:400volt, 50 Hz, 3 phase, 51kw, 101AMP 1. sanding unit 1 sanding belt sectioned 2. Sanding unit 2 sectioned sanding shoe 3. sanding unit 3 sectioned sanding shoe 4. cleaning brush 5. blast cleaning 6. Vacuum Motor: 51 kW Size for transport: 320x240x265 cm (lxwxh)

Condition: ready for operation (used), Year of construction: 1999, Roller conveyor & robot Robot: Make: Kawasaki Model: UD 100 Cgolq I Usv H Aqaec Ujt Serial No: 0289R0S3S Year of manufacture: 1999 Capacity: 100 kg Including protective fence Stock number: 2002448BXM

Condition: ready for operation (used), Year of construction: 1975, Cutting saw Randek Model: 1-5-S Machine no: 431 Year of manufacture: 1975 Tech. info: Blade diam: 700mm Cgjlq I Usldg Sksc Ust Rotating blade in degrees In and out feeder: 4 m in, 5 m out Stock no: 2001525BXM

Year of construction: 1995, Condition: ready for operation (used), Model; Masterwood Type: K 21 Year model: 1995 Tech. info: Number of spindles: 21 CC distance: 32 mm Cgslq Iomqlcio Uc Ujt Max distance between spindles: 640 mm Max drilling depth (threaded mount): 83 mm Max drilling depth (quick coupling): 73 mm Work table dimensions: 940x410 mm Max size of workpiece: 880x2500 mm Max thickness of workpiece: 100 mm Spindle speed: 2800 rpm Working pressure: 6-8 bar Weight 350 kg Motor: 1.5 kW, 380V, 50 Hz, 3-phase Stock no: 2001568BXA

Condition: ready for operation (used), Year of construction: 1983, Brand: Morbidelli Model: M35/A Year: 1983 Tech data: Spindle speed: 2800rpm Number of spindles: 35 pcs Max distance between outer spindle center: 1088mm Spindle center distance: 32mm Drilling depth: 70mm Engine: 3+3 HP Working pressure: 6-7 atm Weight: 650 kg Cgjlq I Ucemv Ehae Ujt Machine size: 1600x100x160mm CM Weight 650Kg Stock no: 2001582BXA

Condition: good (used), Year of construction: 2005, Brand: Hebrock Model: AKV 88 D Machine no: 569-P3 Year model: 2005 Coljq Ihxpoq I Uc Usgt Tech data: Max edging thickness: approx. 3mm Max working height: 50mm Inner radius min: approx. 8mm Feed speed 0-7 m/min Warm-up time: approx. 6.5 min Motor: 9.3Kw, 50Hz, 400V Machine size (lxwxh): 1360x690x1220mm Weight: approx. 150Kg Stock no: 2001921BXA

Condition: ready for operation (used), Year of construction: 2021, Brand: Flex-Trim Type: Stacksander Cslq Iev Hyf Is Uc Ujgt Year of manufacture: 2021 Lifting system pmh Stock number: 2002445BXM

Condition: ready for operation (used), Year of construction: 2003, Brand: Burkle Model: SLC Machine no: 10362-02 Year of manufacture: 2003 Colev Hw Hcsq I Uc Ujgt Technical data of the machine (BURKLE SLC) General data - Type: SLC - Working width: 1300 mm - Working height: 900 ± 20 mm Workpieces - Workpiece characteristics: Flat, self-rigid - Workpiece width (max): Working width - Workpiece width (min): 350 mm - Workpiece length: 3 - 100 mm - Tolerance of the workpiece height over the entire working width: - Single track operation: ± 0.5 mm - Multi-track operation: ± 0.2 mm - Workpiece weight (max): 250 kg Piling material - Inspection material/cleaning agent with a self-ignition temperature: ≥ 200 °C Transport unit - Back pressure roller: See order confirmation - Rubber ring: See order confirmation - Diameter: 186 mm - Feed speed: 8 - 25 m/min Material circulation - Material pump feed capacity (double stroke): 575 cm³ Piling unit Piling roller - Rubber ring: See order confirmation - Diameter: 238 mm - Temperature (in case of optional heating/cooling application roller): Max 60 °C - Peripheral speed: Approx. 8 - 25 m/min Dosing roller - Diameter: 174 mm - Temperature (with optional heated/cooled dosing roller): Max 60 °C - Peripheral speed: Approx. 3 - 9 m/min Accuracy of application over the entire working width at: - Application rate > 10 g/m²: ± 5 %. - Application rate < 10 g/m²: ± 10 % Adjustment of the feed-through height - Feed-through height (max): 120 - 5 mm - Accuracy of setting: ± 0.1 mm Compressed air connection - Required air pressure: 6 bar - Compressed air consumption: Approx. 50 NI/min Dimensions / weights - Dimensions: See installation drawing - Weight at working width 700 / 1300 / 1600 mm: 1250 / 1450 / 1600 kg Electricity - Connection values, voltages: See data sheet for electricity Other information - Noise level: < 70 ± 4 dB (A) Table 1-4: Technical data for standard sizes of the machine (continued) Note: The speed is limited to a maximum of 20 m/min when the dosing roller and height setting are set to a safety distance exceeding 120 mm (cleaning coupling). Stock no: 2002442BXM

Condition: good (used), Year of construction: 2005, Functionality: fully functional, Brand: Cefla Model: Easy 2000D Serial no: 05079/6 Year: 2005 Renovated with: -New control PLC -New feed carpet -New bearings under carpet -New bearing at recovery Note:Available earliest mid May-2025 Cefla model D automatic sprayer for applying paint to boards and other flat workpieces. The machine with dry filter has 2 holders for spray guns. "Back spray" also enables the application of paint to edges. The endless belt allows leftover paint to be recycled. The most important parts of the machine: Air ventilation equipment Celqov Inqzo I Uc Uogt Air purification system Paint supply and distribution system Gun drive system Endless conveyor belt Electronic control system Easy sprayer provides: High quality of painted objects, paint that does not hit the workpiece is recycled High production speed High utilization rate of paint Dimensions: 4840x3708x2900mm (lxwxh) NOTE: With reservation for incorrect technical data presented TECHNICAL DATA Control system ED-EASY2000 Max working width including edges 1300mm Max working thickness 70mm Air flow supply fan 10000m3/h, 3 kw Air flow exhaust fan 12000m3/h, motor 7.5kw Paint supply and distribution system Feeder belt speed 1.6-10.6 m/min Variator 1.1 kw Air pressure mat holder 3bar Compressed air consumption 50Nl/min Air pressure feed pump 6bar Air pressure gun spraying 1-4bar Air pressure gun nozzle 5-6 bar Spray gun holder Motor for operating guns 2 kw Spray gun speed 120m/min Sound level 77.5 db in operation Current: 400 volts, 50 Hz, 3 phases, total 18.1 kw, 40 A Maximum motor power 4 kw, 15.6 A

Condition: good (used), Year of construction: 1999, Brand: Lasm Model: NTS 150 C Machine no: 12960 Year of manufacture: 1999 Tech data: Work table size: 950x300mm Oscillation up/down New plastering tape Plaster tape dimension: 2400x150mm Chip extraction: 100mm Manual tensioning of the plastering tape Scaffolding for plastering tape included, see picture. Oscillation motor: 0.37Kw Motor: 3Kw (4HP), 50Hz, 400V 3-phase Machine size (lxwxh): 1600x600x1650mm Stock no: 2001898 Cgolq Ioq Dkq As Uc Ust