Briquetting press

POR Oscar

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Industrial hydraulic briquetting press POR model OSCA, like new, only 2 hours of operation during maintenance Ffodpfx Adjyhdp Ropow Standard version with semi-sleeve diameter 70 mm + dedicated cooling cabinet COOLER – CHILLER Manufacturer: Micucci System SRL, Via San Desiderio 42 25020 Flero, Italy MODEL: OSCAR Briquette diameter (mm): 70 mm Maximum briquette length (mm): 70 mm Estimated output (kg/h): 130 kg/h Motor power: 12.5 HP Hydraulic compression (kg/cm2): 1,400 kg/cm2 Dimensions (mm): 2095/1300/1700 Net weight (kg): 1,250 kg Maximum working pressure (bar): 150 bar Oil capacity (l): 220 l Hopper diameter (mm): 1200 mm Hydraulic pump (l): 75 l Work system: Three-shift operation

Condition: new, Year of construction: 2025, Capacity: 25 and 40 kg/h Briquette size: 50 mm diameter Briquette length: 20 - 40 mm Container size: 0.38 m³ Power consumption: 4 kW Machine length: 1860 mm Machine width: 890 mm Ffsdpfx Aepfatpedpew Machine height: 1100 mm Weight: 400 kg

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 5328, total width: 1,350 mm, total height: 1,500 mm, total length: 2,100 mm, briquette diameter: 70 mm, overall weight: 1,500 kg, type of input current: AC, input voltage: 380 V, oil tank capacity: 250 l, funnel diameter: 1,200 mm, power: 9.2 kW (12.51 HP), year of last overhaul: 2024, The press is in very good condition, was recently overhauled by a specialist, has a new control cabinet and has been stored in the warehouse since then. It can be inspected and tested. The hydraulic oil and the die can be cooled for continuous operation. It has a pressing capacity of 140 - 175 kg/h. Ffedpjx H A A Ijfx Adpjw

Condition: used, Year of construction: 2006, functionality: fully functional, total width: 1,900 mm, total height: 1,800 mm, total length: 2,500 mm, briquette diameter: 80 mm, overall weight: 2,400 kg, type of input current: three-phase, oil tank capacity: 600 l, – after technical inspection – Italian production – year of production 2006 – DTR TECHNICAL PARAMETERS: – briquette Ø: 80 mm – max. briquette length: 80 mm – efficiency: 350 kg/h – engine power: 27.5 kW – hydraulic crush: 1400 kg/cm2 – max. operating force: 150 bar Ffedpfx Asv T Uphedpew – oil capacity: 600 l – container diameter: Ø 1200 mm – container height: 90 cm – dimensions (length/width/height): 2500 x 1900 x 1800mm – net weight: 2400 kg

Condition: good (used), Year of construction: 1999, Briquetting press type GP 120 Tandem Briquetting press for briquetting chips, wood chips and dust incl. automatic fill level indicator - Briquette diameter: 60 mm - Pressing capacity: 40 - 120 kg/h * 2 = 80 - 240 kg/h (depending on material) - Hopper opening: approx. 1,900 x 1,900 mm - Hopper height: approx. 1,800 mm Fedpfoupwx Hsx Adpsfw - Hopper capacity: approx. 6.0 m³ - Drive power: 7.5 kW, 400 V, 50 Hz - Switch cabinet: available on both sides - Operating hours: 13,725 h or 13,005 h - Hydraulic unit: approx. 300 litre tank for hydraulic oil - Weight: approx. 1,100 kg * 2 = 2,200 kg Used briquetting press in good condition W tong cylinder, tongs (RB 120 reinforced), tong connection flange renewed on one side (left in conveying direction) briquetting | briquette press | briquetting presses | briquette press | briquetting

Condition: good (used), max. working width: 2000 mm for metal sheets up to: 1 mm opening width top clamping bar: 70 mm Ffedpo Ixynsfx Adpsw adjustment bending cheek: 10 mm space needed: 2300 x 600 x 1050 mm

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Equipment and Technical Data: - For classic nesting processing with wear plate - Machine frame of welded construction with ground and hardened prism guides for the gantry, unit head, and consoles - Gantry-type traveling column - Helical rack and pinion drive in X and Y axes, ball screw in Z axis for precise positioning - Working dimensions: - Max. support area on nesting table: X = 3100 mm, Y = 1560 mm - Max. traverse paths: X = 4695 mm, Y = 2100 mm, Z = 293 mm - Max. clearance height over DYNESTIC table: Z = 100 mm from table top (without wear plate) - Maximum programmable speed Vector speed: 128 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min - DYNESTIC table: - Fixed, continuous processing table with grid layout - Continuous grooves in X and Y directions - Groove spacing: 50 mm - Includes 25 meters of sealing cord for clamping the wear plate - Vacuum fields: Single-circuit vacuum system - Drilling unit 7877: - 19 spindles - Drive power: 1.7 kW - 13 vertical spindles: - Individually selectable Ffodpfewka Upox Adpjw - Arranged in U-shape - 5+4 in X direction, 4 in Y direction - 32 mm spacing - Max. drill diameter: 35 mm - Total drill length: 70 mm from screw-on end (depending on panel thickness) - Spindle stroke: 70 mm - Rotational direction: alternating clockwise/counterclockwise - Speed (max): 1000 - 4400 rpm, infinitely variable - Tool holder: M10 thread, 11 mm fit - Without tool, without holder - 6 horizontal spindles: - 2 double drill spindles in X direction - 1 double drill spindle in Y direction - Tool holder: M10 thread, 11 mm fit - Max. total drill length: 63 mm from screw-on end - Without tool, without holder - Milling unit 7842: - Power: 12.0 kW (S6) - Max. speed = 1000 - 24,000 rpm, infinitely variable - Max. power at 12,000 to 24,000 rpm - Air-cooled - With HSK-F 63 tool holder - With right-hand threaded nut (for right-hand rotating tools) - With collet chuck for HSK shank - Ceramic ball bearings (hybrid bearings) - Tool weight max. 6 kg (incl. holder) - Tools: milling and grinding tools max. Ø 160 mm - Safety enclosure according to CE standard - Side and rear safety fence - Vacuum pump: 500 m³/h, dry-running - Personnel safety ensured by light barriers in the front machine area - Hand-held control device for remote operation of the machine with the following functions: - Start/stop of the processing program - Control of processing cycle speed - Reset button - Manual feed/rapid traverse for all axes - EMERGENCY STOP - CAMPUS V7 CAD/CAM software 1x machine license consisting of: - CAMPUS NC-HOPS: - Graphic variant system with WOP and CAD/CAM features for creating part variants using macro technology - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic central lubrication - Automatic lubrication at defined intervals - Additional sealing against dust via pressurization in each guide carriage

Condition: new, Year of construction: 2026, functionality: fully functional, A sliding table saw for working with high density boards, MDF boards, ABS and PVC panels, solid wood and other wood-based materials of similar structure and hardness. The saw is designed for small and medium carpentry work. Strong, professional sliding table saw with a movable table on bars and a separately powered scoring. Saw tilts in the 90–45 degrees range Solid, durable design ensures stability and work safety Controllable speed adjustment Technical data Table dimensions 970×550 mm Sliding table length 3200 mm Cutting width by the fence 1200 mm Transverse cutting by the transverse cutting guide 3100 mm Saw tilt 0°–45° Saw diameter Ø350 mm Saw hole diameter Ø30 mm Saw blade height 0–87 mm Saw blade 350 max height 105 mm Saw blade height at 45° angle 0–60 mm Saw blade 350 max height at 45° angle 73 mm Main saw spindle speed 4000 / 6000 rpm Scoring saw diameter Ø125 mm Scoring saw hole diameter Ø20 mm Scoring speed 8000 rpm Main motor power 5.5 kW Scoring motor power 0.75 kW Intake connector under table diameter 100 mm Intake connector diameter in the saw guard 80 mm Machine weight 680 kg Available equipment Cutting saw Scoring Transverse cut fence Longitudinal fence Modern - ergonomic saw guard Worktop extension Ffedpfx Aotz Smiodpew Fence for mitre cutting Saw blade tilt gauge indicator User manual EC declaration of conformity

Condition: used, HIGH SPEED DOWEL CROSS-CUT AND CHAMFERING MACHINE LOSER MOD. AA220 - Range of working diameter: 6 - 18 mm Fedpfjqpdkcsx Adpjfw - Capacity: about 7,500 - 15,000 dowels/hour

Year of construction: 1980, condition: good (used), Stellite forming machine VOLLMER GF10U Blade thickness 1 to 4mm Width band saw blades 60 to 420 mm Ffedpfogxb Ebox Adpsw circular saw blades 300 to 1.200 mm Ø electric feed drive via gear motor