Used Cnc Baz Vertikal for sale (8,491)

Condition: used, CNC Vertical Machining Center HURCO Type BMC 25/M Serial No: ZB9-001-052 Year of manufacture: approx. 1995 Travel distances X: 610 mm, Y: 410 mm, Z: 560 mm Table size (clamping surface) 845 x 400 mm Table size (with coolant groove) 1050 x 500 mm Spindle taper SK 40 Distance spindle nose - table 155 - 710 mm Table load capacity max. 500 kg Overhang 420 mm Spindle speed max. 10,000 rpm Feed rate 3 to 5080 mm/min Rapid traverse 10 m/min Spindle drive approx. 5.5 kW Power supply 400 Volt, 50 Hz - CNC path control Ultimax 3 with two TFT monitors - Electronic handwheel - Indirect measuring system with rotary encoders on the ballscrew - Tool changer with 20 tool stations - Full enclosure with sliding door - Swiveling control panel - Yaskawa (Japan) spindle drives - Pneumatic-mechanical tool clamp - Without coolant system – pump included – coolant tray missing Machine width 2400 mm Space requirement for transport L x W x H = 3000 x 2400 x 2650 mm Weight 4200 kg Good condition Isdpfew Nklhjx Adnja

Condition: excellent (used), C.N.C. WORKING CENTER (POINT TO POINT) 4 axis (5 axis with FLEX 5) Gantry-drive (axe X) machine Numerical Control Control Powertouch (PC85) Software woodWOP Safety cabin (enclosure) of the working head Working table with pods and rails Mod. K-Table Support rails (No.) 8 Table dimensions (mm) 1340 Automatic deplacement by CNC (X axis) of the Supports rails LED system (on the rails) for the vacuum pods positioning Clamps for workpieces fixing - POWERCLAMP Automatic Tools Changing System Tools storage plate (No. of folds-positions) 18 Max. useful working area (X - Y - Z) mm 4000 x mm 1550 x mm 60 Isdsw Dc Niepfx Adnsa Max. useful working area (X - Y - Z) in edge banding (mm) 4000 x mm 1500 x mm 60 No. 2 Working areas - Vacuum pump (capacity m3/h) 100/140 Separate electric and command cabinet Motorized carpet to evacuate chips and wastes Total installed power (52 A) WORKING GROUPS (TOP): No. 17 Independent vertical boring spindles (High Speed 7500) No. 4 Independent horizontal boring spindles (No.2 in X-axe + No. 2 in Y-axe) Drilling head motor-power (Kw) 2,2 No. 1 Vertical electro-spindles HSK63. Vertical electro-spindles motor power (KW 15) No. 1 Edge Banding head on board (axe Y) Power Edge, Glueing Unit (Hot Melt + Quick Melt Unit) Edges (tape) thickness in rolls (min/max) mm 0,4 - 3 Edge coils supporting unit (N. 1 reels/Coils) Pre-End cutting unit Crosshead aggregate (4 horizontal drilling spindles) N° 1 Circular saw aggregate (diam. mm 125) Combined aggregate (Flush-Trimming/Scraping)

Condition: good (used), Alzmetall BAZ 15 CNC – Vertical Machining Center • 3 axes • Heidenhain control For sale is an Alzmetall BAZ 15 CNC, a compact and robust vertical machining center equipped with a Heidenhain control system. The machine is still operational and can be inspected under power. It is in well-maintained, technically flawless condition. Technical Data Manufacturer: Alzmetall Model: BAZ 15 CNC Application: Milling Machine type: Vertical machining center Control system: Heidenhain Weight: 3,200 kg Table load: 500 kg Axes: 3 X travel: 600 mm Y travel: 400 mm Z travel: 600 mm Spindle speed: 9,000 rpm Tool magazine: 24 positions If interested, simply write or call. Isdpoxxxu Uefx Adnja

Condition: excellent (used), Year of construction: 1999, CNC MACHINING CENTER Iedpfxeu Spdbo Adnea ALZMETALL BAZ 15 Year of construction : 1999 Top condition Technical data : X : 600mm Y : 400mm Z : 600mm Table : 750 x 450mm Main spindle : 10,000RPM Control : HEIDENHAIN TNC 426 24 magazine places

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, BOB-Mill M8 Model/Mold Making Engraving and Milling Center in Gantry Construction TECHNICAL DETAILS X-axis travel: 700 mm Y-axis travel: 800 mm Iodpfxexv Su No Adnsa Z-axis travel: 330 mm Spindle speed: 27,000 rpm Control unit: Mitsubishi E 80 Spindle nose to table: 110 – 440 mm Door width: 760 mm Worktable size: 800 x 600 mm Table load capacity: 400 kg Number of T-slots: 5 T-slot size: 18 mm T-slot spacing: 115 mm Spindle taper: BT30 12-position tool changer Feed rate: 0–10,000 mm/min Rapid traverse X / Y / Z: 15,000 mm/min Positioning accuracy: ± 0.005 / 300mm Repeatability: ± 0.003 mm MACHINE DETAILS Spindle motor power: 7.5 kW 3-axis motor power X / Y / Z: 1.5 x 1.5 x 1.5 kW Machine weight: 4,300 kg Dimensions: 2,000 × 2,500 × 2,400 mm

Condition: good (used), CNC Machining Center HOMAG OPTIMAT BAZ 222/40/K with Edge Banding Unit and Loading Gantry Electronically controlled milling, edge banding, post-processing, and drilling center for the production of furniture parts, solid wood, or similar materials. Two independent Y-axes for the main spindle and edge banding unit Clamping table with 8 clamping consoles Y-1300 mm with hose-free vacuum guidance POWER CONTROL with PC85 controller Software: WoodWOP 5.0 Main spindle: 7.5 kW 12-position carousel tool changer Interface for automatic tool change of machining units with integrated pneumatic/electric/electronic supply and C-axis drive Ijdpfsxmvtqex Adnea Drill head with 17 spindles Cross-cut saw unit 360-degree edge banding unit / for strip materials: rolls Edge thickness: max. 2 mm with veneer; max. 3 mm with plastic Chip removal conveyor Vacuum pump Busch MM 1322 A, 300/360m3/h (replaced in 2013)

Condition: used, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction 1996 CNC path control Ultimax 3 Travel X: 760 mm, Y: 460 mm, Z: 610 mm Table size (clamping surface) 1010 x 400 mm Table size (with water groove) 1120 x 500 mm Spindle holder SK 40 Distance spindle nose - table 150 - 760 mm Projection 450 mm Spindle speed 80 to 8000 rpm infinitely variable Feed rate 3 to 16,000 mm/min. Rapid traverse 24 m/min. Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw spindle - Tool changer with 24 tool positions - Fully protected cabin with sliding door - Rotating control panel - spindle drives Yaskawa (Japan) - pneum. mechanical tool clamp - Coolant unit adjacent, pushed under from behind - trough rinsing Ijdpfotrhq Hox Adnsa Machine width 2400 mm Space required for transportation L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg good condition

Condition: used, machine/vehicle number: 007826, X axis working area: 5600 mm Y axis working area: 1200 mm Working Table: Pod and Rail Iedpewgkt Usfx Adnja Main Electrospindle power: 12 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 17 Total number of tool changer positions: 12

Condition: used, Homatic PC 85 Power Control Numerical Control with WoodWop Software Working range in X axis mm 6000 Working field in Y axis mm 1650 - in case of milling up to mm 1750 N° 10 adjustable panel support bars for positioning the suction cups Loading and unloading aid system via 8 pneumatic bars positioned on each work bar Schmalz type suction cups adjustable for each bar with vacuum seal for fixing the panel during machining Positioning of the suction cups by means of a laser system assembled on the main head N° 1 vertical electrospindle with C Vektor axis with automatic tool change, cones type HSK F63, KW 11 Automatic tool change in 18 positions on the back of the machine Boring head with 27 spindles (4 kW) arranged as follows: N° 11 vertical in X axis N° 6 vertical in Y axis N° 6 horizontal in X Independent edge banding unit with 360° rotation on second Y axis with glue pot and pre-melter for granular EVA glue Iodpfxsl Ikyus Adnsa Applicable edges in rolls - PVC / ABS 0.4 - 3 mm Maximum working height in edging mm 60 Maximum applicable edge height mm 65 Internal radius min mm 30 (depending on the type of edge) External radius depends on the type of material used Rubberized pressure roller + rubberized pressure roller Lamp for panel preheating Edge trimmer N° 1 aggregate blade, diameter mm 200 (max) No. 1 combined trimmer - edge scraper unit Edge holder magazine Front protection and safety system with carpets Perimeter protection grilles Chip evacuation system with motorized belt Air conditioning system for cooling and cleaning the machine control Automatic lubrication system Vacuum pump

Condition: ready for operation (used), Year of construction: 1997, Max. workpiece length: 3600mm, max. workpiece width: 1400mm, length: 8750mm, width: 5250mm. Iodpfxeqvnl Te Adnsa

Condition: excellent (used), C.N.C. WORKING CENTER with 4 axes (X-Y-Z-C) for routering, boring, cutting and edge banding Goose-neck type - Front emergency carpets Numerical Control Type PowerControl PC 85 - Software WoodWop No. 10 Supports/Rails (mm 1340) LED system (on the rails) for the vacuum pods positioning Automatic Tools Changing System (Store at No. 18 folds) Max. useful working area (X - Y - Z) mm 6175 x 1550 x 60 Max. useful working area (X - Y - Z) in edge banding mm 6000 x 1475 x 60 No. 2 Working areas - No. 2 Vacuum pumps (capacity m3/h 100 each) Motorized carpet to evacuate the wastes from the working process Total installed power KW 27 Working groups (top) No. 17 Independent vertical boring spindles (power of the drilling head Kw 2,2) No. 4 Independent horizontal boring spindles No. 1 Vertical main Electro-spindle HSK F63 Kw 11 Iedpfx Adjh Ucn Rsnoa No. 1 Circular Saw 0°-90°) diam. (mm) 125 No. 1 Edge Banding head on board (axe Y) Power Edge, Glueing Unit (Hot Melt + Quick Melt Unit) Edges (tape) thickness in rolls (min/max) mm 0,4 - 3 Edge coils supporting unit (N. 2 reels/Coils)

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 600 mm, table width: 750 mm, table length: 450 mm, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 24, TECHNICAL DETAILS Travel X: 600 mm Travel Y: 400 mm Travel Z: 600 mm Isdpfx Aswtq Rasdnsa Table size: 750 x 450 mm Control: HEIDENHAIN TNC 426 Main spindle speed: 10,000 rpm Magazine positions: 24

Condition: used, CNC 3+2 axis vertical machining center DECKEL MAHO type DMU 35 M CNC control SIEMENS 810D with ShopMill Manufacturer no. 11065353554 Year of manufacture 2001 Travel paths: X: 350 mm, Y: 240 mm, Z: 340 mm Isdpfxovt D D Ue Adnja Table movements: C-axis: 360° Swivel range: +105° / -15° Universal swivel - rotary table: 400 x 290 mm, center hole 30H6 Table load: max. 100 kg Distance spindle nose - table: min. 145 mm to max. 485 mm Feed rate: 5,000 mm/min Rapid traverse (X / Y / Z): 5 m/min Input resolution: 0.01 mm Total power requirement: 15 kVA Speed range - main spindle: 20 - 6,300 min/-1 Drive power - main spindle: 6.3 / 10 kW (100% / 40% ED) Torque: max. 55 / 80 Nm Tool holder: SK 40 DIN 69871 Pull bolt: DIN 69872 or ISO 7388/2 Type B Interface: Serial RS232C, LAN (RJ45) Power connection: 400 volts, 50 Hz, 15 kVA Compressed air connection: 6 bar - CNC control Siemens Sinumerik 810D with ShopMill V05.03.22, NCU 03.03.34-CCU1E, MMC103 - 3-axis controlled (X, Y and Z axis) - Manual swivel rotary table, C axis = table rotation 360°, B-axis = swivel range +105°/ -15° - direct path measuring system for all 5 axes - electronic handwheel - spindle drive via servo motor with toothed belt and 2 gear stages - fully protected cabin with sliding door - swiveling control panel - coolant nozzles on the vertical head - chip tray with coolant container and cooling lubricant pump - work area lighting - documentation available space requirement L x W x H 2000 x 2000 x 2100 mm weight 1750 kg good condition

Condition: excellent (used), Control unit new Spindle replaced 400 hours ago X axis 1200mm Y axis 600mm Iodpfxjt Sxiro Adnja Z axis 850mm Tool changer 24 times 4 and 5 axis available maximum 80 operating hours Year of construction 2001 Speed 9000 Internal cooling 32Bar Accessories 3D infrared probe various milling cutters Clamping device 250 SK 40 holders Tool presetting device (measuring system)

Condition: excellent (used), CNC Machining Centre for Routing, Drilling, and Edgebanding of Straight and Curved Panels 4-Axis Electrospindle – HSK F63 Automatic Tool Changer with 12 Positions Isdpolpf E Usfx Adnja Boring Unit Edgebanding Unit Edge Storage with 3 Positions Vacuum Pump

Year of construction: 1996, condition: good (used), machine/vehicle number: Nr.: 171, BAZ Alzmetall 35 CNC incl. chip conveyor data see photos Dimensions Ijdpfxohfwq Eo Adnsa LxWxH 3700x2270x2820 mm chip conveyor 800x4000x1500 mm Function untested

Condition: used, Machine has a defect in the main spindle CNC vertical machining center CHIRON type FZ 22 L high speed Machining center with CNC control FANUC Series 21-M serial no. 179-98 year of construction 1999 Travel X: 2000 mm, Y: 520 mm, Z: 630 mm Table size 2700 x 570 mm Table load 525 kg (per meter) Tool holder SK 40 (DIN 69871) Drilling capacity 35 mm Tapping capacity M27 Ijdpfx Ajquhbgjdnsa Tool diameter 75 mm Diameter with free secondary positions 105 mm Tool change speed tool - tool 2.0 sec. Tool change speed from chip to chip 4.8 sec. Distance spindle nose - table 190 to 820 mm Spindle speed max. 10,500 rpm Main spindle drive max. 18.5 kW Mains connection 400 Volt, 50 Hz, 32 kVA - Pendulum machining over 2 work areas (partition wall missing) - CNC control FANUC Series 21-M - Tool changer 40-fold - IKZ = internal coolant supply through the spindle - Spray protection cabin with sliding door - Indirect measuring system - Coolant device with chip conveyor opposite - Electronic handwheel Transport dimensions of the basic machine L x W x H 4600 x 2470 x 2950 mm Weight of the machine approx. 7.5 tons. Transport space requirement on the truck L x W x H 12000 x 2470 x 2950 mm Transport Weight on the truck approx. 10 ton. Weight 7.2 tons. good condition - machine has a defect on the main spindle

Condition: used, Horizontal machining center with 2-fold shuttle table STEINEL type BFZ 5 with CNC control SIEMENS Sinumerik 810 M serial no. 34 year of construction 1988 Travel X: 500 mm, Y: 400 mm, Z: 320 mm Clamping surface, table surface 500 x 400 mm Tool holder ISO 40 Spindle speed max. 6300 rpm infinitely variable Main spindle drive 12 kW Mains connection 380 Volt, 50 Hz, 30 kVA - Tool changer with 24 tool positions - Changing table with 2 stations - Interface for data transfer - Coolant unit with chip conveyor Space requirement L x W x H 4100 x 2500 x 2650 mm Ijdpfjutuyijx Adnsa Weight approx. 8 tons good condition Transport dimensions: Machine L x W x H 3200 x 2500 x 2650 mm, approx. 7.5 tons. Chip conveyor L x W x H 3500 x 1100 x 2100 mm, approx. 600 kg

Condition: used, As-new CNC Vertical Machining Center, Milling Machine VMC, BAZ, HSC Milling, Machining Center TAIKAN B540Z Serial No. 1171009 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Travel range for working area X: 488 mm, Y: 400 mm, Z: 230 mm X-axis travel for tool change position X: 540 mm Table size 520 x 400 mm Spindle taper ISO 25 Distance spindle nose - table 165 - 395 mm Max. spindle speed 36,000 rpm, infinitely variable Feed rate 0 to 10,000 mm/min Rapid traverse 15 m/min Table load capacity 200 kg Max. tool length 120 mm Max. tool diameter 80 mm Max. tool weight 0.8 kg Tool change time approx. 10 sec. Axis drives 0.8 kW each Spindle drive 3.5 kW at 100% duty cycle Electrical connection 400 Volt, 50 Hz, 7.5 kW CNC path control SIEMENS Sinumerik 828 D Basic - Software: NCU V04.05+SP06+HF01 - Interfaces: LAN, USB and CF-Card - Measuring system for tool setting: METROL tool sensor - Vertical milling spindle = high-frequency spindle with liquid cooling and external recooling unit - Tool changer with 13 tool stations - Electronic handwheel - Coolant system - Protective enclosure with sliding door - Central lubrication - incl. 10 tool holders ISO 25 with ER20 collet chuck and a set of collets Transport dimensions (L x W x H): 1800 x 1500 x 2300 mm Weight: 2,900 kg Iedpfx Ajw Ed U Nednoa Excellent condition – as new Machine comes from a showroom with very few operating hours.

Year of construction: 2021, condition: like new (used), AVEREX HS-540i GTS Horizontal machining center with 8 pallets Control system - Fanuc M-Pro1 (0i-MF) - 10,4" color LCD - NC memory with 512 KB - AICC II Control with 200 blocks readable in advance - Ethernet and USB Device - Electronic handwheel - Weekly timer: Auto. Power On/Off of the machine - High Speed Skip - Manual Guide 0i - 54 (6+48) pairs of workpiece zero points - Tool Offset Memory C - 400 pairs of tool offsets - 400 storable programs - High Speed Skip Signal - Programmable spindle load monitoring - Tool Life Management - Advanced macro variables (#500-#999) - Program Restart - Helical Interpolation, Cylinder Jacket Interpolation - Drilling cycles, rigid tapping - Scaling, Mirroring, - Polar Coordinates Programming - Corner chamfering / Corner rounding - Blanking sets, up to 9 different - Customer macro "B Travels - travels X/Y/Z: 800/800/800 mm - spindle center to pallet surface: 30 - 830 mm - spindle nose to pallet center: 100 - 900 mm Ijdpsh Iy Snefx Adnoa - travels B: 0-360 ° Speeds - rapid traverse X/Y/Z: 74/74/74 m/min - feed rate during milling: 0 - 40.000 mm/min - rapid traverse B: 66.6 rpm - 1G+ acceleration Pallet changer - rotary changer - number of pallets: 2 - pallet size 500 x 500 mm - Load capacity: 500 kg per pallet - workpiece size: Ø800 x H1.000 mm - Mechanical locking of the pallet clamping device - Pallet clamping force: 9.8 kN x 4 cones (39.2 kN) - Pallet height from floor: 1,099 mm Tool changer - Tool holder: BBT 40 (SK 40 and HSK 63 optional) - Number of magazine positions: 80 - Max. Tool diameter: Ø95 mm - Max. tool diameter Max. tool diameter with free neighboring places: Ø185 mm - Max. length: 400 mm - Max. Tool weight: 8 kg - Type: fixed station/chaotic table - Speed: 16 sec. for 80 tools - Tool change time: 0,9 sec./2,1 sec. (heavy tool) - Chip to chip time: 3.0 sec./3.5 sec. (heavy tool) Spindle - Spindle Taper: BBT 40 Big Plus™ - Speed: 15,000 rpm - Drive power: 37 kW - Torque: 249 Nm up to 1,150 rpm - Compressed air through and at the spindle - Bearing diameter: Ø71 mm - lubrication: oil / air - oil cooler Rotary axis - Axis: Full 4th axis - 66.6 rpm - Indexing: 0.001 - Clamping force: 5.000 Nm - Holding force: 1.973 Nm Linear guides - Manufacturer: THK - width: 45 mm - guide shoes X/Y/Z: 190 x 120 / 120 x 70 / 154 x 86 mm Ball screw - Manufacturer: TSUBAKI - Diameter: 40 mm - Internal cooling: Yes, temperature controlled - Feed forces X/Y/Z: 13.500 Nm - Lubrication: Oil / Air Coolant management - Coolant system incl. tank 550 liters and pumps - Chip spirals on the right and left side of the machine - Coolant through the spindle, 30 bar, incl. preparation for 70 bar - Coolant shower - oil skimmer Accuracies - positioning accuracy: ± 0,005mm - Repeating accuracy: ± 0,0025 mm Other - Adjustable thermal compensation of spindle and motor flanges - Central lubrication oil / air - CE - 50 kvA transformer Dimensions (APC 2 / 80 or 120 tools) - Machine size: 4.914 x 2.660 x 2.632 mm - Footprint: 4.914 x 3.880 x 2.632 mm - Machine weight: approx. 12,960 kg - Dual chip conveyor (combination hinged and scraper belt) - Magazine capacity increased from 80 (standard) to 120 ex works - BLUM TC50 probe with infrared transmission System for

Year of construction: 2010, condition: ready for operation (used), Main Drive Spindle motor power 15 kw Iedpfxexpywlo Adnsa Additional Equipment Gluing unit Tool changer (18-fold) Boring head (30 spindles) FLEX-5 unit This HOMAG OPTIMAT BAZ222/60/K was manufactured in 2010. A robust woodworking machine featuring a main spindle of 15 KW, an 18-fold tool changer, and a 30 spindle boring head. Additional features include a 6 KW milling spindle and a FLEX-5 unit. A great opportunity to buy this HOMAG OPTIMAT BAZ222/60/K woodworking machine. Contact us for further details regarding this woodworking machine. Application Types CNC Wood Machining

Condition: excellent (used), Grinding range 600 x 460 mm Wheel diameter 250 mm Magnetic plate 500 x 250 mm Misc.accessories Ijdpfx Ajmmdhrjdnsa MARCELS MASCHINEN CH

Year of construction: 2003, condition: ready for operation (used), Main Drive Spindle speed range 1500–18000 Tool taper HSK F63 Number of axis 4 Iedpfxsxnr H Ae Adnsa Tools Max weight 6 kg Max tool length 200 mm This 4-axis HOMAG PROFI BAZ20/30/16/V/D was manufactured in 2003. It features a Homatic CNC control, WOODWOP CNC programming, an 18-position disk changer, and a main spindle with a 12 kW three-phase motor. Capable of handling workpieces up to 3000 mm in length and 1400 mm in width, it includes a continuous table with adjustable vacuum clamps. Consider the opportunity to buy this HOMAG PROFI BAZ20/30/16/V/D CNC Wood Machining Centre. Contact us for more information. Application Types CNC Wood Machining

Condition: excellent (used), For sale: Professional CNC rotary table from the renowned brand Fadal Engineering (USA, subsidiary of Giddings & Lewis Inc.), model VH65. Equipped with a Röhm ZG Ø125 mm lathe chuck, significantly expanding application versatility. Technical specifications: • Model: VH65 • Table diameter: 165 mm (6.5”) • Ratio: 90:1 • Pneumatic brake (M60 ON / M61 OFF) • Röhm ZG Ø125 mm lathe chuck – max 4000 rpm, torque 80 Nm • Serial number: 6660297 • Industrial multipin connector Condition: used, fully mechanically functional, normal signs of use. Sturdy, heavy-duty construction guarantees precision and long service life. Ready for use as an additional 4th axis in a machining center. Iedpfxsw R Syij Adnoa

Condition: excellent (used), For sale: CNC rotary table from the renowned brand Fadal Engineering (USA), model VH65. Professional 4th axis designed for machining centers, especially Fadal VMC, but integration with other CNC machines is also possible using the appropriate controller. Technical specifications: • Model: VH65 • Table diameter: 165 mm (6.5”) • Gear ratio: 90:1 • Pneumatic brake (M60 ON / M61 OFF) • Industrial multipin connector • Serial no.: 4630298 Condition: used, mechanically functional, normal signs of operation. Solid and heavy construction – ideal for precise 4-axis machining. Ijdpfxew R St Ns Adnsa