Used Cnc 360 for sale (13,406)

Condition: used, Year of construction: 1995, turning length: 460 mm, turning diameter: 440 mm, spindle bore: 65 mm, Control: Siemens 810T Turning length: 460 mm Turning diameter: 440 mm Tool holder: VDI 30 12-position turret (6 driven stations) Spindle bore: 65 mm Podpfx Adsxw Rhkjnsrd

Condition: new, Year of construction: 2025, 0390 mm 610 mm 54 mm 330 mm 4000 U/min A1-6 DIN 55026 Psdpjw In Epjfx Adnerd 60 mm 140 mm

Condition: excellent (used), Year of construction: 2017, operating hours: 10,240 h, functionality: fully functional, travel distance X-axis: 3,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, controller model: Heidenhain, spindle speed (max.): 15,000 rpm, operating hours of spindle: 10,400 h, We offer in good condition DMG Mori DMF 360-11 4-axis milling machine. Prodpfx Aoxqa I Hjdnod X-Axis travel: 3600 mm Y-Axis travel: 1100 mm Z-Axis travel: 900 mm Spindle has been changed 2000 hours ago due to short circuit (no crash) HSK-A63 15.000 RPM spindle 46kW / 61.7 hp - 200 Nm Machine has following options: Swivel head Heidenhain Touch probe TS 642 Automatic door Internal coolant 40 bar with paperbelt filter

Condition: used, Year of construction: 1988, Technical details: turning diameter over bed: 360 mm Prodpfou Rqabox Adnjd turning dia. over face-slide: 160 mm turning length: 800 mm longitudinal traverse (z-axis): 810 mm facing movement (x-axis): 205 mm control: TX-8 spindle passage: 60 mm revolution per minute: 63 - 3150 / 2 step U/min feed:: 10.000 mm/min. tool turret - number of stations: 8 operating hours - idle run: 8834 h tailstock taper ISO: SK30 DIN 2080 tailstock quill stroke: 105 mm operating pressure: 40 bar total power requirement: 38 kW Weight approx.: 3,1 t dimension machine xH: 1,8 x 3,3 x 1,8 m dimensions of hydaulic: 580 x 400 x 750 mm Equipment: Lathe chuck Ø 200 mm, hydraulic Feed force Z-axis = 8 kN and X-axis = 5 kN Coolant system control panel Accessories Fine adjustment device for tool set-up *

Condition: used, Year of construction: 2011, DMF360 Base Machine Gantry Milling Machine X3600 Y1100 Z900mm Siemens 840D solutionline Fixed Table 4200 x 1100 mm Psdpsxck Ihjfx Adnjrd Equipment / Accessories Built-in rotary table ø1050mm Swivel head as B-axis 20-18000 rpm Dynamic package X-Axis 80m/min Work area partition Measuring probe, laser tool measurement, tool breakage detection Electronic handwheel Blow air through spindle center Coolant supply 40/80 bar with band filter system, 1000 L tank Chip flushing and rinse gun Chip conveyor, discharge height 1250mm Air conditioning unit for drive and control cabinet Automatic doors A-Axis Lehmann EA420, right-side preparation Hydraulic clamping for fixed and rotary table Robot interface with contact pressure monitoring Interpolated turning High-speed settings Compcad – compressor function 3D machining, 3D tool correction Shutdown and automatic machine start Oil and emulsion mist extraction system

Condition: good (used), Year of construction: 2003, travel distance X-axis: 3,900 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 820 mm, rapid traverse X-axis: 100,000 m/min, rapid traverse Y-axis: 60,000 m/min, rapid traverse Z-axis: 60,000 m/min, workpiece weight (max.): 2,200 kg, table width: 900 mm, table length: 4,200 mm, 5-axis CNC machine (VMC) DECKEL MAHO - DMF 360 Linear HSK-A63 Spindle Pendel screen Production package IKZ 40 Bar Filter capacity 23 L/Min Coolant tank 900 L Last DMG Repair in 2023 for 11.000 EUR    X - Travel: 3900mm Y - Travel: 920mm Z - Travel: 820mm B - Axis: 108° Table Length: 4200mm Table Width: 900mm Table load: 2200 Feed rate X-Axis: 100000mm/min. Feed rate Y-Axis: 60000mm/min. Feed rate Z-Axis: 60000mm/min. Spindle Taper: 63ISO/Bt/Mk Power on spindle: 35kW Speeds / ranges: 18000Rpm ATC / revolver: 30 Coolant through spindle / Bar:40 Number of controlled axis: 3+1 Chip conveyor: Yes Prsdpfxjw Rdyhe Adnod Coolantsystem: Yes Length: 8500mm Width: 3450mm Height: 2910mm Weight: 30700kg

Year of construction: 1986, condition: ready for operation (used), Turning diameter over bed/face slide: 360mm/160mm, center distance: 800mm, travel X/Z: 205mm/810mm, speed: 3150rpm, spindle bore: 60mm, tool positions: 8, rapid traverse X/Z: 10m/min. Machine dimensions X/Y/Z: approx. 3300mm/1800mm/1800mm, weight: approx. 3300kg, control: Traub System TX-8. An on-site inspection is possible. Prjdpfx Aewmqx Djdnjd

Condition: as good as new (ex-display), Year of construction: 2022, Stierli Radial 2500 CNC bending machine Prsdpfxsgqfp Hj Adnsd Radial bending machine with large rotary table for bends up to 360°. Bending power 2500 Nm Bending capacity flat steel 60x15 mm S235 Bending capacity round steel ø30 mm S2353 turntable ø : 390 or 550mm Pre-feed machine year 2022 incl. hand- and foot pedal Machine as new Works like a classic hand bender, but driven, very precise and programmable. Incl. stop manual or programmable CNC stop 1, 2 or 3m. The bending angles as well as the stop positions are digitally programmable and can be stored in bending programs. The standard tooling is made by simple bending pins. A driver bends the material around these bending pins. These tools can also be manufactured very easily by the customer. In addition to the standard bending bolts, we (or our customers themselves) also manufacture tools for other sections. Possible are sheet metal bending, flat steel, round steel, various profiles, frames etc.. Bending jaws can also be screwed on, which allows bending of very small radii. (similar to a hand bending machine) This machine solves your bending tasks!

Condition: used, Year of construction: 1983, functionality: limited functionality, turning diameter over cross slide: 160 mm, turning length: 800 mm, spindle bore: 60 mm, travel distance X-axis: 205 mm, travel distance Z-axis: 810 mm, rapid traverse Z-axis: 10,000 m/min, rotational speed (max.): 3,150 rpm, total height: 1,800 mm, total length: 1,800 mm, total width: 3,300 mm, swing diameter over cross slide: 160 mm, turning diameter over bed slide: 360 mm, overall weight: 3,100 kg, Technical details: TRAUB TND 360 (1983) Rotation diameter over bed: 360 mm Rotation diameter over cross slide: 160 mm Turning length: 800 mm Longitudinal stroke (z axis): 810 mm Axial stroke (x axis): 205 mm Control: TX-8 Prodpfswm Dhxox Adned Spindle clearance: 60 mm Speed: 63 - 3150 / 2 steps rev. Feed:: 10,000 mm/min. Turret head - number of stations: 8 Tailstock holder ISO: SK30 DIN 2080 Tailstock quill stroke: 105 mm Working pressure: 40 bar Total power requirement: 38 kW Machine weight approx.: 3.1 tons Machine dimensions approx. L x W x H: 1.8 x 3.3 x 1.8 m Hydraulic system dimensions: 580 x 400 x 750 mm Equipment Lathe chuck Ø 200 mm (without jaws), hydraulic

Condition: new, Experience unmatched precision and performance with ROBBI cylindrical grinding machines. Our machines offer grinding lengths starting from 600mm and are available in semi-automatic and CNC versions. With a grinding diameter of 300-1000mm, you have endless possibilities. Some machines are available from stock! Discover our extensive range of special accessories that make your cylindrical grinding machine even more versatile. Whether for complex workpieces or challenging tasks, our machines always deliver the best results. Trust in ROBBI's years of experience and let us optimize your machining processes together. Invest in quality and precision - contact us today! Our selection of conventional or controlled machines with grinding length up to 2m (further models available upon request): TECHNICAL MAIN DATA: Model Omicron CNC 60 or semi-automatic series Grinding diameter 595/695 mm Grinding length 1000 - 3000 mm max. workpiece weight between centers 1200 kg TECHNICAL MAIN DATA: Model Omicron CNC 36/32 or semi-automatic series Grinding diameter 320 / 355 / 455 mm Grinding length 630 - 2030 mm max. workpiece weight 120 (250/300 opt.) kg CONVENTIONAL MACHINES: Podpfxjgay T Dj Adnerd TECHNICAL MAIN DATA: Model Omicron E Series Grinding diameter 360 - 430 mm Grinding length 630 - 1530 mm Workpiece weight between centers 200 - 300 kg ACCESSORIES (EXAMPLE FOR OMICRON CNC 60): CNC control: Siemens 840D Glass scales: in the X-axis Coolant system: with coolant collection tank Grinding wheel dresser: mounted on the tailstock (without diamond) Telescopic cover: for the fabric table Machine oil: 5l for the spindle Frequency converter: for spindle motor and workpiece drive (stepless) Hydraulic unit: for controlling the tailstock quill Ball screw in axes: X and Z Optimized cycle with geometric and operational parameters - CNC grinding machines meet the requirements for producing medium-sized workpieces. - The machines are equipped with the latest generation SIEMENS 840Di sl system. - The machine can be equipped with automatic measuring systems. - It is possible to design the grinding wheel for geometries specifically created for the required production type. - High-precision machining can be carried out when the grinding machines are equipped with a third interpolated axis and specially designed software. EASY PROGRAMMING Complex programs can be created without the need for knowledge of ISO programming. The input of parameters is facilitated by a series of messages and symbols that explain the meaning of the different parameters step by step. Programming of work cycles is done by entering the same cycle parameters. The order of execution of the various cycles can be changed quickly and intuitively. By the way, in addition to affordable new machines and tested used ones, you can expect more from us: • Consultation and problem-solving on-site at your location • Organization of transport of your machine to your factory • Installation, assembly, commissioning, and operational handover and more.

Condition: used, AJAX AJAT360X1000 CNC Lathe, Swing Over Bed 320mm, Distance between Centres 750 - 1000mm, Swing Over Cross Slide 150mm, Spindle Nose A2 - 5, Spindle Bore 55mm, Spindle Speed 150 - 2000rpm, Chuck Size 200mm, Tailstock Barrel Diameter 32mm, Tailstock Barrel Travel 100mm, Tailstock Morse Taper MT3, Motor Power 3 - 7kw, Machine Work Hours - 100 hours Location: These lots are located in Newcastle upon Tyne, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Psdoxzf Igjpfx Adnjrd

Condition: used, Year of construction: 2017, CNC Gantry Plasma Cutting Machine (Bevel Unit) with Oxy-fuel Torch Manufacturer: Zinser Type: 2425-I/3600 Year of manufacture: 2017 CNC Control: 5010 Track length: 11 m Cutting table with oscillating conveyor system, including extraction system Dimensions: 2,000 x 8,000 mm 1 plasma torch with Hypertherm XPR300 power source Pedpfjw Rpvbox Adnsrd automatic gas console incl. automatically rotating plasma bevel unit Bevel System 2015/350 1 oxy-fuel torch Filter system Downflow 3DFP9-SP Power: 9 kW Laser diode

Condition: excellent (used), Year of construction: 2010, feed length X-axis: 650 mm, feed length Y-axis: 500 mm, feed length Z-axis: 475 mm, feed rate X-axis: 6,000 m/min, feed rate Y-axis: 6,000 m/min, feed rate Z-axis: 6,000 m/min, table width: 450 mm, table length: 1,530 mm, X-Axis: 650mm Y-Axis: 500mm Z-Axis: 475mm Table Length: 1530mm Table Width: 450mm Table load: 350 Spindle speeds: 55 - 4000Rpm Feed rate X-Axis:6000mm/min. Psdpsxtmqtsfx Adnsrd Feed rate Y-Axis:6000mm/min. Feed rate Z-Axis:3000mm/min. Length: 2300mm Width: 2550mm Height: 2200mm Weight: 2850kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), controller manufacturer: Heidenhain TNC 426, empty load weight: 19,000 kg, total length: 6,120 mm, total width: 5,050 mm, total height: 3,150 mm, volledige CNC indexeerfreeskop (2x 2,5°) gereedschapswisselaar met 30 posities koeling door spindel Longitudinal travel X-axe: 3600 mm Cross travel Y-axe: 1000 mm Travel Z-axe: 1600 mm Dimensions clamping space- table: 4100 x 900 mm Power on spindle: 22/29 kW Admission in millinghead (ISO): BT 50 Max speedrange: 1 > 2250 rpm Pjdpfx Adexpkifjnord

Condition: new, Year of construction: 2025, Technical data Swing over bed 360 mm Swing over cross slide 150 mm Maximum turning length 750 mm Spindle speed 100–2000 rpm Spindle bore Ø 51 mm Spindle taper A2-6 Tailstock spindle taper MT5 Number of tools in the holder 8 Tools size 20×20 Tailstock spindle feed 100 mm Main motor power 3.7 kW Dimensions 1815×1300×1600 mm Weight 1300 kg Available equipment SINUMERIK 808D control system in Polish and English SIEMENS servomotors 1 live tool 3-jaw hydraulic chuck 8-position turret head soft jaw kit Podpsizw E Ajfx Adnsrd hydraulic tailstock cooling system automatic gear and guide lubrication system 24V halogen lighting Polish and English manuals EC declaration The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: used, CNC Milling Machine ABENE Type VHF-360TI serial no. 36084 year of construction 2008 CNC control HEIDENHAIN TNC 320 Travel X: 650 mm, Y: 510 mm, Z: 450 mm Table size 1200 x 400 mm Spindle holder SK 40 Spindle speed 55 - 3000 rpm. 2 steps Feed speed 30 - 4000 mm/min. infinitely variable Rapid traverse speed (X + Y-axis) 4000 mm/min. Rapid traverse speed (Z-axis) 2000 mm/min. Spindle nose-to-table distance 20-495 mm Motor power spindle drive 7.5 kW Mains connection 400 Volt, 50 Hz - CNC contouring control HEIDENHAIN TNC 320 with RS232, USB and LAN interfaces - Electronic handwheel - mechanical handwheels for X and Y axis - Spindle speed manually switchable with 2 gear stages (stage 1 = 55-700 rpm) + (stage 2 = 701-3000 rpm) - Inclined bed concept with laterally mounted swivel spindle head +/- 50° - Manual inclined bed adjustment via hand crank - Hydro-mechanical tool clamping - Automatic central lubrication - Coolant system with electric cooling lubricant pump opposite - Machine light - Switch cabinet permanently attached to the machine Prjdpoty A Ehjfx Adned - Operating hours of control unit on = 14780 hours - Read operating hours machine on = 12980 hrs. - Read operating hours program run = 400 hrs. Space requirement L x W x H 2600 x 2000 x 2000 mm Weight 2500 kg Very good condition

Condition: excellent (used), Year of construction: 2010, feed length X-axis: 650 mm, feed length Y-axis: 500 mm, feed length Z-axis: 475 mm, table width: 450 mm, table length: 1,530 mm, table load: 350 kg, X-Axis: 650mm Y-Axis: 500mm Z-Axis: 475mm Table Length: 1530mm Table Width: 450mm Table load: 350 Spindle speeds: 55 - 4000Rpm Feed rate X-Axis:6000mm/min. Feed rate Y-Axis:6000mm/min. Feed rate Z-Axis:3000mm/min. Length: 2300mm Width: 2550mm Psdpfjxtbkuox Adnerd Height: 2200mm Weight: 2850kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2025, Technical data Swing over bed 360 mm Swing over cross slide 150 mm Maximum turning length 750 mm Spindle speed 100–2000 rpm Spindle bore Ø 47 mm Spindle taper A2-6 Tailstock spindle taper MT5 Podpfxof Ey Ume Adnsrd Number of tools in the holder 8 Tools size 20×20 Tailstock spindle feed 100 mm Main motor power 3.7 kW Dimensions 1815×1300×1600 mm Weight 1300 kg Available equipment SINUMERIK 808D control system in Polish and English SIEMENS servomotors 3-jaw hydraulic chuck 8-position turret head soft jaw kit hydraulic tailstock cooling system automatic gear and guide lubrication system 24V halogen lighting Polish and English manuals EC declaration The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: excellent (used), HOLEX SK40 collet chuck for ER collets – robust design, ideal for use on CNC machining centers. • Type SK40 – DIN 69871 Prjdpfx Adew S Itbensd • ER collet (diameter Ø16 mm) • Chuck lengths: 70 mm, 100 mm, 110 mm (depending on model) • Max. speed 12,000–15,000 rpm • Torque up to 70 Nm • Balancing class G6.3 – stable operation at high speeds • Brand HOLEX – Hahn+Kolb Germany • Very good, warehouse condition • Available individually or as a larger set

Condition: excellent (used), Year of construction: 2017, operating hours: 2,000 h, Model Amada HFE M2 EVO 100t x 3110 , 8 axis Press Brake Year 2017 Predpfxsxyyt Ue Adnjd Tonnage 100 tonnes Max. Bend Length 3110 mm Approach Speed 1 - 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1 - 100 mm/sec Motor Power 9KG Weight 6600 Kg guarding Erwin Sick machine mounted light screen, side and rear interlocked fencing Dimensions Machine Length 4585 mm Machine Depth 2580 mm Machine Height 2680 mm Distance Between Side Frames 2705mm Beam width 60 mm Table height 960 mm Open Height 470 mm Throat Depth 420 mm Stroke Length 200mm

Condition: good (used), Technical data for the shelf connector: Shelf system: Stow Type: Pal Rack NS Included in delivery are: 01x shelf connector, used for shelf distance: 360 mm total length: 360 mm cross section: U 35x25 mm material thickness: ca. 2,00 mm material color: sendzimir galvanized Drill hole diameter: 11 mm Weight: 0,480 kg | pcs. 02x screws M10 x 35 mm 02x nuts M10 General information about the article: Podemqldkspfx Adnord This article is only offered for pickup. A desired transport or shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: used, Year of construction: 2011, For sale: CNC machining centre profit H20 Format-4 Felder - year 2011. The machine is in continuous operation and can currently be inspected under power! 3-axis centre with preparation for a 4th axis. Working area 1250x3150mm, Z height=100mm, possibility to work on two separate working zones. In 2024, the electrospindle was refurbished. All repairs and maintenance carried out by a qualified service provider. Loading is provided. Transport is the responsibility of the buyer – flatbed truck with a bed length of 7-8m required. Requirements to connect the machine: - Electric cable 5x4mm2 with a plug compatible with workshop sockets Prodpoxg Ehdsfx Adnsd - Electrical protection (at least) 32A industrial, matched to motor power. General rule: rated current indicated on the machine (nameplate) +40% - Pneumatic connection, internal diameter at least 12mm - Compressor with capacity of at least 100l/min - Extraction/aspiration system VAT invoice provided. Price shown is net. For any questions please contact us by phone or email.

Year of construction: 2025, condition: ready for operation (used), Main Drive Pjdpjxwzzhsfx Adnord Spindle Speed 24000 RPM Spindle motor power 9 kW Number of axis 3 This 3-axis QUICK CNC UE-481PL was manufactured in 2025. It features a robust heavy-duty base, a large working area of 2100 x 3050 x 200 mm, and a 9 kW HSD milling spindle capable of 24,000 rpm. Additional highlights include a 12-fold linear changer, dual 250 m3/h Becker vacuum pumps, and a wireless control panel. If you are looking to get high-quality CNC machining capabilities, consider the QUICK CNC UE-481PL machine we have for sale. Contact us for more information. Application Types CNC Wood Machining

Condition: like new (used), Year of construction: 2020, functionality: fully functional, CUT 2530S - Variable CNC Machine EPS cutting machine with 4 independent moving axes and variable machine table. Podpfjwfdm Ejx Adnjrd

Condition: ready for operation (used), Year of construction: 2025, Main Drive Number of axis 3 This 3-axis QUICK CNC KQ-63E was manufactured in 2025. It's a multi-spindle drilling machine capable of handling workpieces from 70 to 2800 mm in length and 50 to 1220 mm in width. Features include top and bottom milling spindles, a high-speed tool changer, and brushless servo motors. If you are looking to get high-quality drilling capabilities, consider the QUICK CNC KQ-63E machine we have for sale. Contact us for more information. Application Types Boring & Drilling (Wood) Pedpfx Adoxwzzusnord