Used Veneer Pear for sale (2,740)

Condition: excellent (used), Veneer gluing machine Lajdpfx Asu R I Ezeffok Working width 780 mm With paper and glue thread

Condition: like new (used), Binder with glue thread Ljdpfxswnff Io Affsak Zigzag stitching Heater with air blower Foot pedal control 380V power supply

Condition: used, No. 04473 Veneer saw Scheer FM 8 - 3100 Used Ledjw A Actjpfx Affjak Jointing and fine-cutting machine for joint-tight and splinter-free sawing of veneer, chipboard, blockboard or solid wood Strip cuts are very easy to make Rear table is approx. 470 mm wide The clamping beam is operated pneumatically The saw unit is guided by hand Cutting length 3100 mm Cutting height max. 45 mm Motor 1.8 kW Transport dimensions approx. 3800 x 1100 x 1400 mm LWH Weight approx. 400 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Year of construction: 1999, condition: ready for operation (used), A veneer line Cremona is available. 1) Vertical cutter Cremona, year of manufacture: 1999, working width: 5400mm. Includes lifting device. 2) Dryer Cremona, year of manufacture: 1999, control: Siemens PLC, control year: 2019, working width: 5400mm, vacuum feed width: 5400mm, sections: 6, temperature zones: 2, cooling section: 1. Production capacity: approx. 70 sheets/min. Documentation available. An on-site inspection is possible. Lodpfow I E Dvex Affoak

Condition: ready for operation (used), Dryer for veneer with 4 levels. In-feed and out-feed system Lasdpfjw Ib A Usx Affjk with quality sorting and sorting pockets.

Condition: good (used), Year of construction: 1981, functionality: fully functional, cutting height (max.): 3,000 mm, table length: 3,000 mm, - pneumatic clamping beam - cutting length 3000 mm Lasdpfow Hlxlox Affek - front support table - rear support table with stop - 2.2 kW motor

Condition: excellent (used), Veneer press JU 60 2200 x 1200 mm heating plate damaged (see pictures), heating plate works Lsdpfxomhguaj Affjak year of construction 1965, heating 12 kw Loading costs (forklift rental approx. 500 €)

Condition: used, Year of construction: 2009, functionality: fully functional, Machines connected in one line (all three machines are only sold together). 1. Veneer crossfeed splicing machine Fisher+Rueckle FZR-15, year 2009 2. Direct Stacking Device Fisher+Rueckle DAR-22, year 2009 3. Scissor lifting table 1000 kg TECHNICAL DOCUMENTATION (full on request) Veneer Cross-feed Splicing Machine FURNIMASTER FZR-15 Veneer format length (longitudinal to the fibre) 350 - 1500 mm Veneer format width (transverse to the fibre) 50 - 500 mm Veneer strip thickness 0.3 - 1.5 mm Lajdjt Akcfepfx Affok Max machine output 30 cycles/min. (the output rates are related to an average veneer strip width of 100 mm transversely to the fibre) Connected load (basic machine): Power rate 13.5 kW Compressed air pressure 6 bar Power consumption: Electric power 6.2 kWh Compressed air supply 15 NL/min. Dimensions and weight (basic machine): 2940 mm L x 1000 mm W x 1530 mm H. 3200 kg Stacking device DA-2200 Veneer format length (longitudinal to the fibre) 600 * - 1500 mm Veneer format width (transverse to the fibre) 500 * - 2200 mm Maximum stacking width for output on the - right-hand side 2200 mm - left-hand side 2200 mm - back 1500 mm Stacking height max. 500 mm Power consumption from FZR-15 Weight 1200 kg Lifting table 2500 mm L x 1200 mm W. 1000 kg

Condition: as good as new (ex-display), Year of construction: 2021, total width: 1,618 mm, total length: 1,830 mm, total height: 2,400 mm, overall weight: 5,000 kg, type of input current: three-phase, input current: 81 A, input frequency: 60 Hz, opening width: 100 mm, operating temperature: 140 °C, cylinder diameter: 65 mm, Shelf press for veneer , plywood , MDF, particle board, solid wood, etc. Manufacturer : JOOS Model: HPS 20 year of production 2021 Total pressure force : 200 kN 4 cylinders ⌀ 65 mm x 400 mm Maximum hydraulic working pressure : 150 bar Pressure : 2.0 daN / cm2 5 heating plates size : 1000mm x 1000mm Operating temperature : 0℃ - 140℃. Infinitely adjustable temperature. Timer to set the working time , after the set time the press automatically opens. Heating power - 5 x 12 kW Total power - 64 kW (81A , 60Hz) Weight - 5000 kg Lsdjt Eq E Sspfx Affoak Press new - never used Full technical documentation included.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4500x1500x2000 mm Weight 6500 kg Ledpfxov A Hl Te Affsak Total power requirement 22,5 kw

Condition: new, Year of construction: 2024, FULL AUTOMATIC HORIZONTAL BAND SAW WRC1050 FOR CUTTING VENEER - SERVO – PERFORMANCE, DOUBLE CUT Lodjghrnbepfx Affoak EFFICENT FAST CUTTING WITH HIGH CUT PRECISION with FAST CENTRATION and FAST TURNING system

Condition: used, Veneer saw, veneer saw machine, jointing machine, fine cutting machine, fine cutting circular saw, Veneer saw drive motor Laodpfx Afsh Elztofek -Veneer saw: SF Scheer drive motor EM 21 -Drive: 1.6 kW 2820 rpm -Dimensions: 265/270/H255 mm -Weight: 24 kg

Condition: excellent (used), Year of construction: 1962, Veneer press Year of construction 1962 60 tons pressure 15 kw heating, 380 Volt Ljdjtyk Hyjpfx Affjak 2500 x 1200 mm Heating plates are ok.

Condition: used, functionality: fully functional, Machines connected in one line (all four machines are only sold together): 1. Veneer 2-knife cutting guillotine CUTMASTER Monguzzi 2600 2. Glue application machine GLUEMASTER, year 2006 3. Roller conveyor MONGUZZI R2500, year 2009 4. Veneer fanning machine Fisher+Rueckle FANNINGMASTER AP515, year 2009 Tech. data Veneer 2-knife cutting guillotine CUTMASTER Monguzzi 2600 Cutting length 2.600 mm Length of cross-cut 1.477 mm Cutting height 100 mm Strip width min 20 mm Ledpfxet A Nr So Affsak Rip fence Yes Pressure beam pneumatic Blade drive pneumatic Weight 3.800 kg CE marking Total connection 10 kW

Condition: used, Year of construction: 1997, No. 3214 Feed-through veneer press Sergiani LAS Plus Used, year of construction 1997, already dismantled and stored Automatic press with continuous operation for the production of barrier doors, finished doors (veneer doors, HPL, CPL) and pre-treated parquet (2 - 3 layers). The press can be used to load the workpieces one after the other, while the pressure in the other compartments is kept constant. Up to 2 employees are required to operate the line. The multi-daylight press enables a very high production output. The pressing time is approx. 3 minutes (180 seconds) and is spread over 10 levels, which means that the press opens every 18 seconds and a new panel is processed. The press has already been dismantled and stored. The system was in operation until it was dismantled. The previous owner produced 3-layer parquet with the system. The bottom layer was inserted manually. The middle layer consists of one piece. This was glued at the top and bottom and automatically inserted into the system. The top layer was also inserted automatically. Glue spreader / glue applicator not included (optionally available) Stages: 10 Pressing force: approx. 5.5 kg/cm² Total force: 200 tons Panel size: approx. 2500 x 1300 mm LW Heating: Hot water Area of application: Production of doors, laminating, veneer and wood-based material processing High productivity with a capacity of up to 1200 doors per shift (factory specification) Vacuum loading system with 2-lane infeed roller conveyor, without gluing Scissor lift table with loading belt (belt approx. 2900 x 1000 mm LW) Vacuum stacking station with outfeed roller conveyor Space requirement for press with loading table approx. 6500 x 2365 mm LW Space requirement for entire production line approx. 25000 x 5710 mm LW Lsdpfx Aov Sthgeffoak Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without transportation and assembly Loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3980x1500x2000 mm Weight 6000 kg Lodpfxev A Hl Ho Affjak Total power requirement 22,5 kw

Condition: ready for operation (used), Hot press Ljdpfswbwixex Affoak Plan size 2500 x 1300 mm 1 intermediate plan 4 pistons

Condition: used, Used machine Used veneer saw of the company Scheer type FM 2 - 3000 Clamping by handwheel integrated suction unit Cutting length: 3000 mm movable Lasdpowka Rdjfx Affjk Availability: short term Location: Röllbach

Condition: good (used), Cutting length 3050 Handwheel tension Chain feed Space required approx. L x W x H approx. 4200 x 800 x 1400 mm Ljdewkfqpjpfx Affeak All information is subject to change without notice.

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 203841024, pressing force: 120 t, installation height: 400 mm, working width: 3,500 mm, empty load weight: 5,150 kg, number of cylinders: 8, TECHNICAL DETAILS Press size: 3.5 x 1.3 m Panel size: 3.5 x 1.3 m Opening stroke: 400 mm Max. pressing pressure: 120 tons Ljdpfx Ajv Ak Tusffsak Number of cylinders: 8 Oil boiler temperature: Max. 120 °C Heating power: 18 kW MACHINE DETAILS Dimensions: 4.5 x 2.1 x 2.2 m Weight: 5,150 kg Operating voltage: 400 V / 50 Hz EQUIPMENT - Touch screen with computerized interface TS/400 - Mylar cover for upper and lower platen - Electronic flatness control EFC - Exclusion of the leftmost row of cylinders - CE safety standards

Condition: good (used), Year of construction: 1981, functionality: fully functional, JOSTING EFS 2600 Veneer Shear Year of manufacture: 1981 S/N 9443 Manufacturer: JOSTING Maschinenfabrik GmbH & Co. KG Model: EFS 2600 Good condition Purpose: Precise cutting and trimming of veneer sheets and veneer bundles Technical specifications: Cutting length: 2,600 mm (effective cutting width) Material thickness: up to approx. 3 mm (depending on veneer type and condition) Drive: Electric motor drive via belt and eccentric shaft Cutting principle: Upper blade moves vertically against a fixed lower blade (guillotine cut) Blades: High-quality high-speed steel (HSS), ground and replaceable Feed mechanism: Manual or optionally pneumatic/hydraulic, depending on the model Table height: approx. 850 mm (ergonomic for Operator) Backgauge: Manually adjustable with scale; Optionally available with digital display or motorized adjustment Operation: Two-hand safety control with emergency stop button Foot pedal for the clamp on certain models Clamp: Mechanical or pneumatic, ensures precise fixation of the veneer stack Ljdpewmxmvefx Affeak Safety features: Two-hand operation Emergency stop Protective covers Electrical connection: 400 V / 3 Ph / 50 Hz Power rating: approx. 4–5 kW Weight: approx. 1,800–2,000 kg Dimensions (L x W x H): approx. 3,400 x 1,300 x 1,700 mm Special features: Solid, torsion-resistant welded construction High repeatability for serial cuts Suitable for all common veneer types (beech, oak, maple, exotic woods, etc.) Areas of application: Veneer processing in joineries and Furniture factories Veneer production and sorting Interior and vehicle fittings (e.g., for yachts)

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4200x1650x2250 mm Ledpfxov A Hlte Affsak Weight 7900 kg Total power requirement 54 kw

Year of construction: 1995, condition: good (used), Kuper veneer zig-zag splicer machine, type FW/ 1200-E year of manufacture 1995 S/N 3508 3179 Specific features of the KUPER FW 1200 E: high feed speed of 60 m/min. electronically infinitely variable width of zig-zag pattern glue thread cutting device max. veneer thickness : 3,0 mm min. veneer thickness : 0,3 mm Ljdpehbp Ifefx Affeak glue thread with hot air heating Compressed air discus for transporting the veneer over the veneer table control via foot pedal feed speed : 35-60m / min Volt: 400 V, 50 Hz Total power 1,35 kW working height 915mm weight approx. : 440 kg Dimension : 2,12m x 0,73m x 1,55m

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3480x1500x2000 mm Lsdpfov A Hk Asx Affsak Weight 5500 kg Total power requirement 22,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3600x1650x2150 mm Lsdpov A Hi Sefx Affeak Weight 6500 kg Total power requirement 52 kw