Used Veneer Pear for sale (2,740)

Condition: good (used), Year of construction: 1987, max. cutting length: 4200 mm with rear support featuring a movable stop with front support Laodpoxtwylefx Affek Required space: 6.7 x 1.2 m

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, pressing force: 90 t, cylinder diameter: 85 mm, stroke length: 350 mm, number of cylinders: 6, TECHNICAL DETAILS Electric heating plates: 3,000 x 1,300 mm Number of heating plates: 2 pcs. Total pressing force: 90 t Cylinder stroke: 350 mm Number of levels: 1 pc. Level opening: 350 mm Press cylinders: 6 pcs. Diameter of press cylinders: 85 mm MACHINE DETAILS Working temperature: 90°C Max. temperature: 120°C Electrical data Operating voltage: 400 V/50 Hz Connected load: 22 kW Heating capacity: 22 kW Power requirement hydraulic unit: 3 kW EQUIPMENT Movement of the press table via rack-and-pinion and parallel guides Electronic control unit with touchscreen Digital timer for setting pressing time Digital input and monitoring of pressing pressure Digital diagnostics and fault message display Safety circuit with two-hand operation Safety pull-cord Ljdpjxnyqpsfx Affeak Safety support for lower press table EFC electronic flatness control Gold anodized heating plates (Busse) Note: Dismantling and loading can be offered for approx. €1,200 net.

Condition: excellent (used), Year of construction: 2006, I sell the veneer splicer Kuper FW-1200E. Lodpfx Afjwg Ty Rofeak Very good condition. Available immediately.

Condition: good (used), Code: 0225 Brand: CASATI MACCHINE Model: Z 2000 - CE Standard Ledpfx Asxmkkksffjak Thread splicer for veneer - CE Standard Technical data: Reach mm 1200 Feed speed 10/40 mt/min Veneer thickness mm 0,3-3 Total electrical power Kw 1,5 Noise level DB 73,5 Compressed air 6 bar Overall dimensions mm 2050 x 600 x 1500 h Weight kg 450

Condition: used, Year of construction: 1991, Cutting length 3100 mm Cutting height 45 mm Motor output 1,8 kW dimensions 4000 x 500 x 920 mm weight 450 kg Ledpjr I E Hcjfx Affsak

Condition: used, Scheer FM 2-3000 Veneer Saw, Splicing and Fine Cutting Saw Type: FM 2-3000 Motor: 2.5 HP Machine No.: 199540 Cutting length: 3000 mm Lasdpfx Afexf Tqwefek Saw blade diameter: 180 mm Rear support table Weight approx. 300 kg.

Condition: good (used), Year of construction: 1988, functionality: fully functional, Clipper Babcock BSH - STC 28 - 1988 To be disassembled by the buyer Laodpfx Afet D Dg Tofok

Condition: used, Year of construction: 2002, Used ORMAMACCHINE hot press model NPC/R 6/120 working dimensions: 3500 x 1300 mm solid platens in perforated steel fixed lower platen; movable upper platen platen thickness: 80 mm number of cylinders: 6 total pressing force: 120 ton pistons diameter: 85 mm installed power: 8 kW year of manufacture: 2002 CE marked Lodpfx Ajxn Nnwoffjak

Condition: like new (used), Year of construction: 2007, I sell the veneer splicing machine KUPER FLI. Ledpovxvc Hjfx Affjak Year 2007. Very good condition. Available immediately.

Condition: good (used), Code: 0223 Brand: ITALPRESSE Laodpfx Afsxmhcdjfjk Model: PHF Hydraulic press for curved veneers for processing seats, chair backs, benches, tables and other curved items Technical data: Platen dimensions mm 2600 x 1600 Opening between platens mm 1500 Thrust ton 100 Movement from bottom to top Motor power Hp 4

Condition: excellent (used), Burkle shelf press Shelf length 220 cm, width 125 cm Clearance between shelves 39 cm Nice aluminum shelves Electric heating Piston diameter 70 mm, 4 pistons Safety switch - pull cord Laodpfjxn Iiyex Affok Pump motor 0.75 kW Pressure 2.9 kg/cm² Sturdy, compact machine Dimensions 140 x 270 x h-180 cm Weight approx. 2400 kg Machine in stock, can be tested, in very good condition Loading included in the price

Condition: used, Year of construction: 1970, Year of manufacture: 1970 Total pressing force at 320 atü: 80 tons Pressing cylinder: 6 pistons Motor power: 1.1 kW Heating-up time approx. 20 min. Price ex works. Ljdpfx Afewx Rrnefoak

Condition: good (used), Year of construction: 1979, Veneer saw FSK Year of manufacture 1979 Pneumatic 1,8 kw, 380 Volt cutting length 3000 mm cutting height 40 mm Saw blade 180 mm Depth to fence 500 mm Lsdsm Dr Uropfx Affeak space requirement 4000, 1200, 1300 mm weight approx. 500 kg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2960x1500x2000 mm Weight 4000 kg Ledpev A Hkiefx Affeak Total power requirement 19,5 kw

Condition: excellent (used), Year of construction: 2008, I sell the press for veneer and foil ORMA NPC 6/90 AS-BO. Lodpfx Afsu E E A Tofjak Product size max. 2500 x 1300mm Oil heating. Total power 20,5 KW at maximum. Very good condition. Available immediately.

Condition: good (used), Code: 0193 Brand: CASATI MACCHINE Model: BIG 3200 - CE Standard Hydraulic two knives veneer pack guillotine shear - CE Standard Description: Sturdy steel made structure, cast iron knife beam. Self-lubrificating prismatic slide-ways The machine allows, with a single operation, to cut the veneer pack on both sides to be trimmed - The simultaneous trimming on two sides of the veneer pack is carried out thanks to the movement at the same time, of two knives, one fitted on a fixed structure and the other one on a moving part - The machine is equipped with an adjustable rear shoulder, as well as with a pressor to clamp the veneer pack during cutting operations. Possibility of working as a single guillotine shear Useful cutting length (as double guillotine shear) mm 3200 Useful cutting length (as single guillotine shear) mm 3550 Pressore stroke mm 100 Pressor width mm 550 Min width to be cut mm 18 Max width to be cut mm 530 Scrap adjustment field mm 0/50 Ledpfxsqzky Ej Affeak Photoelectric cells Electronic programmer allowing to program the number of cuts to be effectuated and the relevant width Perimeter protections Total power installed Kw 13, 9 Operating pressure bar 6/7 Overall dimensions mm 5200 x 1700 x 1800 h Weight kg 9000

Condition: used, Used machine Lajdpfoxdpmfex Affek Tabletop model, Throat depth 420 mm Motor power 25 W. Connection voltage 110 – 235 V, 1 phase, 50 – 60 Hz. Feed speed approx. 6 m/min. For joining veneers with thicknesses from 0.4 – 2 mm using glue thread. Heater power approx. 75 W. Complete with foot switch. Dimensions approx. 660 x 360 x 460 mm. Shipping weight 26.5 kg. Availability: short notice Storage location: Flörsheim

Condition: like new (used), Shelf length: 3000 mm Shelf width: 1300 mm Ledpfoxlgzpox Affoak Number of pistons: 6 Water heating Weight: 4300 kg

Condition: excellent (used), Veneer gluing machine FWJ900 Lodevkfncspfx Affoak With glue veneer, neat condition Max. veneer thickness 2 mm, min. 0.4 mm Control via foot pedal Floor model, feed speed 7 mm, throat 900 mm, weight approx. 200 kg, dimensions: 1400 x 500 x 1680 mm

Condition: good (used), Code: 0017 Brand: ITALPRESSE Model: SCF/8-S Hydraulic press for hot/cold cycle for wood materials, composite materials, plastics and various materials Technical data: Platen size mm 3000 x 1500 N° 6 Drilled solid steel platens thickness mm 38/40 - Coated in aluminum Ledpfxjvvmwio Affjak N° 5 Daylight openings N° 4 intermediate platens Cylinder stroke mm 450 Press space mm 90 Platen movement from bottom to top Max working temperature 120° Platen heating by water or steam Total thrust ton 120 Specific pressure on 80% of the surface area kg/sq cm 3,3 N° 8 thrust pistons diameter mm 70 Hydraulic unit power Hp 4 Timer for timed opening Overall dimensions mm 4200 x 1800 x 2900 h Weight kg 13000 approx

Condition: used, Used machine Equipment and technical data: Reach: 900 mm Connection: Thread Heating: Hot air heating Feed rate: 15 m/min Space requirement: approx. 1300x600x1700 mm Laedexdpm Eopfx Affek Weight: approx. 200 kg Location: Baden-Württemberg Availability: short-term

Condition: good (used), Code: 0063 Brand: MONGUZZI Model: TRA-OLM 2600 - Norme CE Automatic hydraulic veneer guillotine with 1 blade - CE Standard Technical data: Sturdy structure essential to guarantee a precise and quality cut Ljdpfxov Igtbo Affsak Pressure and lowering speed of the presser and blade holder independently adjustable via hydraulic valves Cutting length mm 2650 Presser opening mm 80 Cutting execution time 4 sec Presser width mm 340 ideal for blocking any type of veneer Cutting display light Photocells and safety barriers Installed power Kw 10 Work surface height mm 930 Automatic numerically controlled rear register with programs Sliding on quality linear guides Side button panel for processing the end cutting side Rear safety nets Overall dimensions of assembled machine mm 4100 x 2450 x 1750 h Machine dimensions for transport mm 4100 x 1800 x 1750 h Weight kg 4000

Condition: good (used), Code: 0419 Brand: ITALPRESSE Model: V/2 Electric press for cold gluing of doors, furniture, panels, composite materials, technical materials, plastics, aluminum, various materials Equipped with a motor that is operated by a switch with automatic return. This switch controls the movements of the mobile platen towards or away from the panels, while the required pressure and the release are controlled by a handwheel, which is on the side of the press. This system allows for maximum pressure with minimum effort Platen dimension mm 2500 x 1200 Opening mm 650 Pressure screw n°2 Installed power Hp 0,75 Overall dimensions: mm 2850 x 1200 x 1650 h Weight kg 880 Lajdpfx Aju A S Haoffsk

Condition: good (used), Code: 0218 Brand: ORMAMACCHINE Model: P25/2 Hydraulic cold press for wood, furniture, doors, panels, furnishings , composite materials, plastics, aluminum and various materials Platen dimensions mm 2500 x 1200 Aluminum-coated platens Lajdpfx Afoxlt Uvsfjk Opening mm 500 N° 2 hydraulic pistons Ø 40 Motor Hp 1,5 Overall dimensions mm 2600 x 1200 x 2100 h Weight kg 800

Condition: good (used), Code: 0583 Brand: RAVNE Model: 3700 Integral steel Knife (blade) for veneer guillotine mm 3600 Length mm 3700 Height mm 110 Lodpfjd Im I Rex Affoak Thickness mm 12