Veneer dryer with sorting

Plymac

Year of construction: 1998, condition: ready for operation (used), functionality: fully functional, Vanicek drying chamber with post rack trolley Gbodpfewxdqkex Akysu with in- and out-swing gates with control system and electrical control cabinet Dimensions: internal length 13.05 m, width 4.00 m, height 2.80 m Fan VMR 71-05-4, E-motor 1.1 kW/400V Dehumidification Ø 50, with actuator Dehumidification Ø 40, with actuator UGL sensors, humidification, heating valve (to be provided by client) Switchgear, heating coil, fan frame Stacking dimensions 1x12.5 m, 2x1.2 m, 2x1.0 m

Year of construction: 1996, condition: refurbished (used), Used Hosokawa Alpine Zirkoplex ZPS 315 classifier mill A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Gbedpjkqlf Sofx Akyou Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery The Hosokawa Alpine Zirkoplex ZPS impact classifier mill is perfect for the fine grinding of different dry materials with a precise control over the particle´s top cut thanks to its integrated classifier wheel design, using the Alpine classifier ATP. It can be used to pulverize different products and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, etc. The comminution takes place in the bottom part of the grinding chamber where the rotor plate fitted with grinding tools (hammers or pins) impacts and projects the particles against the liner in order to break them. Within the same chamber, the air circulation brings the fines to the rotating classifier wheel where oversize grains are rejected to then return to the griding zone for reprocessing, whereas the fine particles make it through the classification step to the next stage, normally the filter. Thanks to the required process air volume, reduced temperature increase during grinding is to be expected compared to other granulation technologies. Adjusting the final particle size distribution can be easily done by changing different parameters, such as the speed of the grinding rotor or disc and the classifier wheel, air volume, feeding rate, etc. Material of construction: stainless steel for product contacted parts Without wear protection Non Pressure Shock Resistant (NPSR), non-ATEX Scope of supply: Hosokawa Alpine ZPS 315 mill with motors, a set of grinding tools of choice and installation table

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 30,000 mm, total height: 4,300 mm, total width: 6,500 mm, workpiece weight (max.): 100 kg, temperature: 220 °C, heating capacity: 80 kW (108.77 HP), workpiece height (max.): 1,200 mm, workpiece length (max.): 2,500 mm, insulation material: Mineralwolle 75 kg/m³, insulation thickness: 150 mm, workpiece width (max.): 800 mm, Equipment: lighting, Fully automatic continuous powder coating system (indexed conveyor, pretreatment, Wagner coating, ovens) For sale is a professional, fully automatic powder coating system as a continuous system (indexed process) from the trading agency Klaus Benecke. The system is ideally suited for the efficient coating of aluminum components as well as other metallic parts. A customized configuration of the system is possible upon request! Highlights & Key Components: - Chemical pretreatment: 2-stage spray booth (L=3,600mm, W=1,500mm, H=2,250mm) including degreasing/phosphatizing and rinsing zone with spray ring. - Flash-off oven: Continuous oven up to 120°C with 40kW LPG gas burner (Riello). (other energy supply possible) - Powder coating booth PVC 3,600: Antistatic plastic booth with mono-cyclone (12,000m³/h extraction capacity) and after-filter. - Wagner Premium application technology: 2 lifting units, 6 automatic PEA-C4 guns, 2 manual guns and control system designed for up to 10 guns. - Curing oven: Continuous oven up to 220°C with 80kW LPG gas burner (Riello). (other energy supply possible) - Conveyor system: Cardin chain conveyor C-100 in indexed operation (50m conveyor length, 54m chain). - Control system: Modern PLC control system with 7" color display (Easy View), inverter and modem for remote maintenance. Technical data: - System type: Powder coating system (continuous / indexed process) - Max. workpiece dimensions: (L x W x H) 2,500 x 800 x 1,200 [mm] - Max. load per carrier: 100 kg/traverse Gbedpfxjum Ufls Akyju - Estimated throughput: approx. 50 m²/h (both sides) - Material: Aluminum / metal parts - Conveyor belt: Chain Cardin C-100 (50m) - Burner output: Dryer / Oven 40kW / 80kW (LPG gas or other energy source on request) - Control system: PLC with 7" touchscreen Condition: New system / Project Components included in scope of supply: - Chemical pretreatment (2-stage spray booth) - Flash-off oven - Powder coating system (PCB 3,600) - Wagner application technology - Powder curing oven - Conveyor system - Electrical control system - Services & accessories

Condition: ready for operation (used), Year of construction: 1999, A dryer Cremona is available. Sections: 6, temperature zones: 2, cooling section: 1, width: 4200mm. Production capacity: approx. 80 sheets/min. Documentation available. An on-site inspection is possible. Gsdjw I E Dpjpfx Akyebu

Condition: good (used), Year of construction: 1994, Complete sawmill: Loading system + bandsaw 1100, blade 130 mm + hydraulic log carriage model EO 700 + 1 outfeed Gedpoy Iuuxefx Akysbu

Year of construction: 1999, condition: ready for operation (used), A veneer line Cremona is available. 1) Vertical cutter Cremona, year of manufacture: 1999, working width: 5400mm. Includes lifting device. 2) Dryer Cremona, year of manufacture: 1999, control: Siemens PLC, control year: 2019, working width: 5400mm, vacuum feed width: 5400mm, sections: 6, temperature zones: 2, cooling section: 1. Production capacity: approx. 70 sheets/min. Documentation available. An on-site inspection is possible. Gedew I E Dvopfx Akysbu

Condition: used, Year of construction: 1986, Colour: Green Price: On request Feed through press Wemhoner VOF2-400-2 Serial number 13350686 Maximum press dimensions 1500x4400mm Maximum stroke 150mm Press pressure 400T 7.5kW, 380V Gedewng S Aopfx Akyebu 10 cylinders diameter 120mm Solid plates aluminum 90mm Top and heated, oil boiler included. With infeed and outfeed conveyor. Transport dimensions: Full normal trailer 13000x2400x2400mm, total weight 25,000kg. - Year: 1986 - Documentation available: No - CE certificate present: No - Serial number: 13350686 - Main motor power [kW]: 7.5 - Press drive: Hydraulic - Max. workpiece length [mm]: 4400 - Max. workpiece width [mm]: 1500 - Max. workpiece height [mm]: 120 - Total stroke [mm]: 150 - Number of stages [pcs]: 1 - Material of press plates: Steel - Number of cylinders [pcs]: 10 - Cylinder diameter [mm]: 130 - Total working pressure [ton]: 400 - Heating boiler present: Yes - Heating type: Oil heated Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2013, Drying chamber with false ceiling ventilation and frontal trolley loadingfor the production and conditioning of 3 mm oak lamellas, at initial moisture 12 tomax. 15 % / final humidity 7 %used, good conditionmake Mühlböcktype ZSWM2110-1180C - 1.0 l/h at 40° C over 30 % HFyear of construction 2013rated power 7 kW/15Afrequency 50 Hzcontrol voltage 24VDC/230VACprotection class IP54content:the chamber holds- 2 packages in width a 1.10 m - with 0.20 m space between each package- 1 package in height a 1.80 m - with 0.10 m thick underlays and a 0.10 m high free space- 2 packages in length a 2.20 m - plus 0.60 m free spaceThe chamber contains 4 stacking packages and has a total gross volume of 17.4 m²The chamber has a net capacity of 4 m³ of timber - with a timber thickness of 3 mm and a stacking strip thickness of 10 mmand 90 % width utilization with edged ble dimensions of each chamber: Width 2.40 m x height 2.30 m x length 5.00 m- aluminum cassette construction- aluminum frame- dimensionally stable rock wool insulation- aluminum trapezoidal sheet- snow load 100 kg/m²- 2-leaf hinged door- front loading- 2 fans a 3 kW (D=800 mm)- stainless steel/aluminum finned tube heating coil with 50 kW, flow temperature of 80 °C, return temperature 73°C- servo-controlled supply and exhaust air flaps- cold water spraying- chambers work fully automatically- computer control K5Disassembly: Customer locationhandover as viewedwithout guarantee and warranty Gbedpfx Ajvwfhiokyeu

Condition: excellent (used), For sale: timber drying kiln with 3 plus 3 chambers. In very good condition. Godpsy R Tdwefx Akyebu

Condition: new, Year of construction: 2026, New Optimizing saw SALVACUT 5000 by SALVAMAC Innovative high speed optimizing saw with optimization and elimination of wood defects, with double traction with upper rollers and lower feed belt with independent management. Gedpfen E Sl Rox Akyebu From an idea of Salvador Christian.