Veneer press
Ott JU 2513

Condition

Used

Location

Aalen

Show map

Machine data

Machine type:: Veneer press

Manufacturer:: Ott

Model:: JU 2513

Condition:: used

Price & Location

Location:: Im Letten 2/1, 73433 Aalen, Deutschland

Call

Details about the offer

Listing ID:: A19771445

Reference number:: 04485

Update:: 14.08.2025

Description

No. 04485

Veneer press Ott JU 2513

Used

Electrically heated heating plates
Hydraulic pressing pressure
Aluminum heating plates
Plate dimensions 2550 x 1350 mm LW
BUSSE heating plates renewed in 2019 and covered with Mylar film
4 hydraulic cylinders each 90 mm diameter
Total pressing pressure 90 tons
Specific pressing pressure 2.8 - 4.0 kg/cm2
Button control for closing / opening / stop
Emergency stop rip cord
Opening width 400 mm
Total power 19 kW
Stable construction with 3 longitudinal beams in the upper part of the press and 2 longitudinal beams in the press table

Transport dimensions approx. 2900 x 1500 x 2000 mm LWH
Weight approx. 4200 kg

Fpedpfxow Npbzs Aa Ejd
To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment

Sold as is

Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee
Subject to prior sale
For used machines, any warranty is excluded, the following applies: “sold as seen”

Terms of payment: Prices excl. VAT, payment before collection or dispatch

Terms of delivery: ex warehouse

Seller

Registered since: 2019

76 listings online

Call

Send inquiry

Telephone & Fax

+49 7361 ... show

Fax:

These listings may also fit your interest.

Listing

Schwanberg

18,287 km

Veneer press
OTTJU 2513

Call

Condition: excellent (used), Year of construction: 1993, OTT Model JU 2513 Hydraulic veneer press with electric heating plates Under-piston design BUSSE electric heating plates Fpjdpfx Asxgpaqsa Esd Central control panel with all operating elements Analog temperature display for both heating plates Pressing pressure infinitely adjustable via pressure switch device Main switch Two-stage hydraulic pump with automatic switching valve from low to high pressure Emergency safety pull cord Rack compensation Stroke limitation CE compliant Press area: 2500 x 1300 mm Number of press cylinders: 4 Total pressing force: 70 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 20.3 kW Required space (L x W x H): approx. 2900 x 1250 x 1900 mm Weight: approx. 3200 kg

See details

Listing

Nattheim

18,550 km

Horizontal panel saw
PanhansS 45

Call

Condition: used, Year of construction: 2009, Cutting length: 4200 mm Cutting width: 3200 mm Max. saw blade protrusion: with blade vertical at 0° = 70 mm with blade tilted at 45° = 50 mm Feed speed forward: 0-80 m/min. Feed speed reverse: 100 m/min. Weight: approx. 5400 kg. Motor power: 14 kW Scoring saw: 1.5 kW Tool: diameter: 350 mm bore: 30 mm Extraction port (bottom): 140 mm Extraction port (pressure beam): 100 mm Storage location: Supplier Fpjdpfx Aaoyf Nu Ts Esd

See details

Listing

Bergatreute

18,628 km

Edge banding machine
OttU 25. 8 - F

€8,000

ONO plus VAT

Call

Listing

Tauberbischofsheim

18,531 km

Four-side moulder
WeinigUnimat 23 E

Call

Listing

Schwanberg

18,287 km

Veneer press
JAVORMS

Call

Condition: good (used), Year of construction: 1989, Pressing area 2550 x 1350 mm Number of press cylinders #6 Total pressing force 140 t Opening width approx. 400 mm Operating voltage: 3 x 400 V + N, 50 Hz. Total connected load approx. 26 kW Space requirement (L x W x H) approx.: 3400 x 1600 x 2000 mm Weight: approx. 5500 kg Hydraulic hot plate press Down-piston design Electric hot platens Pressing pressure continuously adjustable via pressure switch Hydraulic pump Central control panel with all operating and Digital temperature display for both hot platens Press cycle counter Safety ripcord Rack compensation Main switch Note for used machines: Fsdswd N Rmspfx Aa Espd • Errors in technical specifications and subject to prior sale. • Subject to change without notice. • Prices quoted are for pickup from the location - free shipping! • The machines have been cleaned and functionally tested. • All machines are sold as seen, without any warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only respond to inquiries if you provide your address and telephone number!)

See details

Listing

Mediniai Strėvininkai

17,376 km

Veneer press
OTT (GEBEMA)

Call

Listing

SCM s 52es thicknesser SCM MiniMax s 52 es

Łabuńki Pierwsze

17,596 km

SCM s 52es thicknesser
SCM MiniMaxs 52 es

Call

Condition: new, Year of construction: 2023, power: 7 kW (9.52 HP), planing width: 520 mm, number of blades: 4, overall weight: 483 kg, height adjustment type: electric, planer shaft diameter: 120 mm, planing height: 240 mm, SCM MiniMax s 52es thicknesser Specifications: - condition - new - manufacturer - SCM - width of the thicknesser table - 520 mm - length of the thicknesser table - 850 mm Fjdpsqu U Dnjfx Aa Eopd - minimum thickness of the element - 3 mm - maximum thickness of the element - 240 mm - maximum thickness of the thicknesser harvest - 5 mm - motor power - 7 kW - supply voltage - 400 V - shaft for 4 conventional knives - diameter of planer shaft - 120 mm - rotational speed of the planer shaft - 5000 rpm - maximum planing width - 520 mm - feed speed - 5 / 8 / 12 / 18 m/min - diameter of the exhaust stub - 120 mm - weight (net) - about 493 kg - overall dimensions - 144 x 108 x 110 cm ( W x L x H ) Additional information: - machine brand new - pictures show the actual state of the object of sale - possibility to turn on and check the machine on site. - the price given in the auction does not include VAT and transport costs - available from stock in Italy

See details

Listing

Nattheim

18,550 km

Band saw
PanhansBSB 600

Call

Condition: used, Year of construction: 1996, max. blade length: 4720 mm, motor power: 2.2 kW, roller diameter: 600 mm, max. cutting height: 395 mm, max. cutting width: 585 mm, tiltable table: yes, column side: left, fence: usable on both sides, blade guide position: top and bottom, blade guide: roller guide, design: stationary, weight approx.: 300 kg, dimensions: 1115 x 670 x 2115 mm. Storage location: supplier. Fpodpfxsyg Hzge Aa Esd

See details

Listing

Rödermark

18,557 km

Double miter saw
ELUMATECDG 104- E 355

Call

Condition: good (used), Year of construction: 2012, machine/vehicle number: 104 93333473, Offer 26004 Technical specifications: - Saw blade diameter: 420 mm - Saw blade bore: 30 mm - Maximum cutting length: 6000 mm - Minimum cutting length at 90° + 45°: 335 mm Fodpfx Asyghxysa Eopd - Cutting range: see attached diagram - Swivel range inward, pneumatically operated: 90° - 22.5° - Tilting range inward, pneumatically operated: 90° - 45° - Saw blade speed: 2,800 rpm - Drive: 400 V / 2 x 4,000 W - Compressed air connection: 7 bar - Air consumption per working cycle: - without spraying: approx. 40 l - with spraying: approx. 64 l - Space requirement: approx. W 8,500 x H 1,800 x D 1,800 mm - Weight: approx. 1,800 kg - Includes: - ELUMATEC E 355 control system, - Saw unit swivelling and tiltable for high and wide profiles, - Also suitable for compound mitre cuts, swivels inward up to 22.5°, - Digital degree display, - Separate control cabinet, - Timed spray unit

See details

Listing