Used Push Broach for sale (1,406)

Condition: ready for operation (used), Year of construction: 2021, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: E1361000, overall weight: 600 kg, load capacity: 8 kg, arm reach: 2,028 mm, pivoting range: 360 °, controller manufacturer: Fanuc, controller model: R-30iB Plus, teach pendant manufacturer: Fanuc, teach pendant model: Fanuc A05B-2256-C101#EGN, control cabinet width: 600 mm, control cabinet height: 600 mm, input voltage: 400 V, input current: 32 A, type of input current: three-phase, welding current (max.): 400 A, Equipment: documentation/manual, Fully functional and in excellent condition robot welding cell. Fanuc arm and 2-axis positioner, Fronius powersource, wire feeding and push-pull torch. Fjdpfx Aszu Irnjlbegg FANUC ARC Mate AM-100iC/8L robot R-30iB Plus controller FANUC 2-axis postitioner A05B-1220-J201-N, payload 500kg Fronius TPS 400i powersource with PMC package Thielmanni nozzle cleaner SICK curtains Installed 2021 Robot station is fully operational, in good condition and can be seen in use.

Condition: used, functionality: unexamined, Year of construction: 2001, machine/vehicle number: 3533, input voltage: 400 V, input current: 25 A, input frequency: 50 Hz, For sale: a custom-made cutting and marking line (using disc/circular saw) for round and square tubes, manufactured in 2001 by Simec Srl (Schio, Vicenza, Italy). The system consists of a Simec bar feeder "Caricatore BM" (serial number 3587) that feeds the main Simec unit "MEC 120 MI" (serial number 3583), with a disc cutting station identified with the FAT logo. The line includes a workbench with guides and measuring scales, a collection box for cut pieces, and a roller table for material transport. The structure is mounted on legs and features its own control panel (Siemens Simatic OP3 interface and Rovan Elettronica counter/display), manual control buttons, a mode selector, pressure gauges, and a three-phase electrical connection. Fedpfxezvc Uts Albogg Condition: it was in operation until approximately 1 year ago; the current condition has not been recently verified or tested. Inspection/testing by the buyer is recommended before purchase.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, planing width: 630 mm, tool diameter: 125 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 5,000 rpm, total length of planing tables: 1,260 mm, total width: 1,280 mm, total height: 1,220 mm, overall weight: 1,200 kg, Equipment: CE marking, documentation/manual, • Operation: 1-axis control for planing dimensions, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence. • Buttons for manual quick and fine adjustment of the planing thickness according to the digital display. • Push buttons for starting and stopping the cutterhead. • Integrated operating hour counter. Fgedpfx Alezvfm Eebjg • TERSA all-steel cutterhead with 4 knives. • 2nd rubber feed roller, 85 mm, complete. • Thickness table extension, foldable, 630 x 450 mm. • Thickness table: Electric thickness table adjustment with fine adjustment, feed speed 10 mm/s, mounted on 4 support spindles to ensure stability, table surface finely planed. • Feed: 2 speeds 6 / 12 m/min, electrically selectable even during planing, large rubber feed rollers Ø 85 mm to compensate for varying wood thicknesses, rubber rollers are material-friendly and self-cleaning, easy roller replacement; articulated pressure bar at the infeed. • Extraction: High-pivoting, divided hood with chip extraction connection Ø 160 mm, can be connected on the left or right (on both sides in special cases), minimum extraction air volume: 27 m³/min. at 20 m/s. • Maintenance: Central lubrication strip for oil lubrication points; lubrication of bearings/cutterhead via grease nipples. • Weight: approx. 1,200 – 1,400 kg • Workpiece length min. 270 mm.

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 56535, Double-face circular knitting machine with electronic needle selection, Mayer & Cie. model OVJA 1.6 E, machine number 56535, year 2004. Manufactured in Germany and CE marked on the nameplate. NAMEPLATE DATA: Nominal diameter: 660 mm / 26 inches · Gauge: 20 E · Pitch: 1.27 mm · Number of needles: 1638 · Operating voltage: 380 V · Control voltage: 24 V · Frequency: 50 Hz · Power: 4.0 kW · Electrical diagram number: 191353.2 APPLICATION: Double-face knitted fabric with electronic jacquard: fabrics for mattresses, quilts, cushion covers, and outerwear. EQUIPMENT: Mayer & Cie. control cabinet with display and programming keyboard · Main switch and start/stop push-button panel · Complete perimeter guards · Official Mayer & Cie. service sticker on the cabinet CONDITION: Complete machine, assembled and not disassembled. Fabric remains in the machine from the last production run. An inspection visit and on-site operational test can be arranged. DIMENSIONS AND TRANSPORT (approximate): Length 2.70 m · Width 2.00 m · Height 2.70 m · No need to disassemble it to move it out of the building · Location: Albacete, Spain IMPORTANT NOTE FOR EXPORT: The electrical panel indicates 50 Hz. Before purchasing from a country with a 60 Hz power grid, please consult us. The number of feeders has not been counted; it will be confirmed upon request. Fgjdpezvht Iofx Albeg

Condition: new, Year of construction: 2026, power: 6.99 kW (9.50 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, planing width: 630 mm, Planer Casadei / SCM. Type PS63. NEW annual 2026. Planer width 630mm x height 300mm. Equipped with Tersa- cutter and rubberized challenge roller, which gives a perfect planing result. Electronic setting of planer height and feed speed 5-8-12-18m/min. Planer height setting is done with the push of a button. 9.5hp engine with y/d start. Promotional price: 10.900 euro. Fgjdpszwkukofx Albog We arrange shipping all over Europe

Condition: used, maximum load weight: 30,660 kg, overall weight: 43,000 kg, axle configuration: 2 axles, first registration: 03/2024, next inspection (TÜV): 03/2025, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment: Complete equipment available upon request. Loading Platform * Low-bed with central beam in extendable design * Length approx. 6,750 mm * 5 pairs of lashing rings that fold outwards (LC 5,000 daN) * 1 pair of lashing rings that fold outwards (LC 10,000 daN) * 1 pair of lashing rings lying horizontally at the rear of the loading platform (LC 10,000 daN) * The supply lines are protected in the central beam and adapt to the respective low-bed length. Gooseneck * Length approx. 3,900 mm * Gooseneck hydraulically adjustable up/down and extendable * Technical saddle load: 23,000 kg Rear Chassis * Short design with closed outer frame and diamond plate cover * Chassis with excavator well, which is closed in the rear half to accommodate the air tanks * 2 pairs of lashing rings that fold outwards (LC 5,000 daN) * 1 pair of lashing rings that fold outwards (LC 10,000 daN) Axles * BPW axles Fodpfxozvt Tyo Albegg * Hydro-mechanically forced steered * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Axle tool Tires * 245/70 R 17.5 3PMSF – Manufacturer of our choice, load index (146/146F) Braking System * According to EU regulations with EBS-E (2S2M) without connection lines to the tractor unit Steel Construction * Made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Paintwork * High-quality 2-component (2K) * Topcoat in solid color RAL 3002 carmine red Incl. the following additional equipment: * 2-inch kingpin * One galvanized steel front wall, approx. 400 mm high * One spare wheel holder in front of the front wall * Yellow-red air couplings on the galvanized connection strip at the front * 4 wheel chocks with bracket. (± 5 kg) * Steering from the front and rear via cable remote control, operable via push buttons, with single-axle steering control (without installation in the tractor unit) * Electro-hydraulic unit (± 45 kg) * Yellow reflector tape according to EU regulations on the side, on the extension, and at the rear of the trailer * 1 wooden block, approx. 500x250x200 mm * Attachment rail for aluminum loading ramps at the rear of the vehicle * One bracket for a rotating beacon at the rear of the trailer * One mud flap at the rear of the trailer * European reflector plates (red-yellow) at the rear of the trailer * On the gooseneck and at the rear panel, one bracket each on the left and right for warning signs including socket * Manual and description on a USB stick * Speed stickers 80 km/h at the rear and on both sides * Load gauge for determining axle loads including load diagram * Incl. special accessories: On the gooseneck, aluminum side and rear walls, plug-in, approx. 2,440 x 400 mm (L x H) * The rear galvanized end crossbars are removable. (Length of the structure approx. 2,560 mm). (± 46 kg) * On the gooseneck, a separate air connection with an air gun. * 2 work lights with a switch on the trailer, mounted on the gooseneck platform on the left and right * 6 pairs of rung pockets for end crossbars approx. 100 x 50 mm in the outer frame of the loading platform * 2 pairs in the outer frame of the chassis (± 29 kg) * Extensions, galvanized, extendable by approx. 230 mm per side (± 262 kg) * Hydraulic connections from the gooseneck to the low-bed with multi-coupling instead of screw co

Condition: used, Year of construction: 1992, Overview This complete automatic can filling line has a nominal output of approx. 20,000 cans/hour for 330 ml cans (can type 211/202), packed 24 cans per foil-shrunk tray. The core is an O+H / KHS Hansacan filler with 30 filling valves, mechanically blocked to a Ferrum F 505 G seamer with 5 seaming heads. Empty cans are supplied by a TMG Impianti Vega 120/B depalletizer and rinsed on a Hysek Rinsstar 20000 rinser before filling. A date/coding printer is not included. Technical data - Line type: Complete automatic can filling line - Nominal output: approx. 20,000 cans/hour (330 ml), product- and temperature-dependent - Container: 330 ml can, can type 211/202; 24 cans per foil-shrunk tray - Controls: PLC Siemens S7, Siemens SIMATIC HMI - Warmer and drying station reconditioned; fill-height control and packaging machine new Equipment - Can Depalletizer | TMG Impianti | Vega 120/B | tier-sheet removal, can table, pallet magazine | 2014 - Can Rinser | Hysek | Rinsstar 20000 | filtered-water rinse | 2001 - Can Filler | O+H / KHS | Hansacan | 30 filling valves, fixed for can type 211/202, will be general overhauled | 1992 - Can Seamer | Ferrum | F 505 G | 5 seaming heads, blocked with the filler | 2010 - Can Warmer | SMB | stainless-steel tunnel | warms cans to approx. 25 °C before packaging | reconditioned - Fill-Height Control | Heuft | incl. pushing/reject station | new - Can Drying Station | Gesete | air-dries cans before coding | reconditioned - Packaging Machine | Termo Pack | UMT-1500 | tray erector, packer and foil shrink | new - 2x can turning stations (330 ml can) Fodpozlqu Tefx Albegg - Can conveyor system incl. electrical control panel (PLC Siemens S7) - Tray conveyor system incl. drive station Condition Used line delivered in reconditioned or new condition. The filler and Ferrum seamer are reconditioned and blocked as one unit with a new electrical panel (PLC Siemens S7), new pneumatic panel and renewed pneumatic valves; the can warmer and can drying station are reconditioned; the fill-height control and packaging machine are supplied new. This work is carried out as part of the order, so the line is supplied component by component and is not yet assembled or tested as one running unit. The can depalletizer is the exception - it is already fully reconditioned and in stock. Filler and seamer are delivered with CE declaration and full documentation. Components can be inspected on request. Availability On request; delivery time as per agreement. Reconditioned and new-build components are supplied with a lead time after order. Location and inspection on request.

Condition: used, Year of construction: 2018, Overview This DUETTI case packing group combines a case erector, a case packer and a top-loading case sealer for American-style cases, built by Duetti Packaging (Galliera Veneta, Italy) in 2018 and commissioned at the end of 2018. It packs bottles in 12 x 33 cl and 6 x 75 cl formats at approx. 6,000 bottles/h (33 cl) or approx. 3,000 bottles/h (75 cl), around 10 cases/min. The group is still installed and under power at a brewery in France and can be visited in production on request. Technical data - Manufacturer: Duetti Packaging (Galliera Veneta, Italy) Fodpfx Alszrpwtsbjgg - Model: FORMER 20H + PACKER 10 + CHMSS - Year of manufacture: 2018 (commissioned end of 2018) - Machine type: case former - case packer - case sealer group, American-style cases (carton) - Case formats: 12 x 33 cl and 6 x 75 cl - Capacity: approx. 6,000 bottles/h (12 x 33 cl), approx. 3,000 bottles/h (6 x 75 cl) - approx. 10 cases/min - Gluing: hot melt, Meler Micron 5 unit Equipment - FORMER 20H case erector: carton magazine, vacuum gripper, bottom folding and gluing with 4 nozzles, pressure cylinder and pad, 90° discharge towards the packing section - PACKER 10 case packer: 4-lane bottle distributor, batch formation via sensors, gripper head with inflatable tulip grippers, Cartesian-type movements - CHMSS top-loading case sealer: 4 glue nozzles and pressure rollers - Meler Micron 5 hot-melt unit - Case transport through former and sealer via rough-surfaced side belts (no push bars); conveyor in the filling section - Inclined transfer belt between filling and sealing, convertible to horizontal by removing the sealer foot extensions - Technical documentation (operating manuals, electrical schematics) and CE declarations of conformity Please note: case marking / coding is not included in the scope of delivery. Condition Used - in production: the group is still installed and under power and can be visited in operation on request. Availability From February 2027 - the line remains in production until the end of January 2027 and is dismantled thereafter. Location: France.

Condition: like new (used), number 1 Stück Fjdpszupmaefx Albogg LIEBHERR/LORENZ disc cutting wheel Modul 4 - EW 30° - Zähne 12 - DIN 5480 - new

Condition: used, Year of construction: 2015, - Feed rate: maximum 40 m/min - Motor power: 5.5 Kw - Working length: 7.35 meters Miter saw Manufacturer: Tigerstop Type: UKA 600 Year of manufacture: 2015 Tiger UKA 600 miter cutting system consisting of: Tiger Stop 7.5 automatic feed and stopper Overall length: 7.95 meters Working length: 7.35 meters Net working length (automatic saw): 6 meters Voltage: 220 volts 50 Hz Motor power: 0.45 Kw Feed rate: maximum 40 m/min (depending on the load) Accuracy: +/- 0.4 mm as a sliding guide. Infeed table for TigerStop 6.8 Overall length: 7.4 meters Table width: 325 mm Upward stroke miter saw model UKA 600 with pneumatic lift and clamping device Saw unit mounted on a rotary table with diameter: 980 mm Diameter of the saw blade: 600 mm Cutting capacity: 165 x 240 mm at 90 degrees Maximum cutting height: 165 mm at the fence and 175 mm diameter (at 90 degrees) for round material Cutting angle: 30 - 90 - 30 degrees 45 - 90 - 45 degrees with automatic function Fgsdszuyx Hepfx Albsg Motor power: 5.5 Kw Voltage: 400 volts 50 Hz Working height: 920 mm The machine is controlled by a push button for semi-automatic operation or fully automatically for 90-degree angles via the TigerStop. The rotary table is controlled by a Tigerstop servo drive TigerDrive. Outfeed/infeed table with side protection Length: 3.7 meters Width: 325 mm PC control with Beamworks program, computer with touch panel and computer cabinet. Cutting list download option for csv file. Extension with 6-strand flipper loading device For automatic loading of material with a length of 500 - 6000 mm. Shorter pieces can be placed directly on the infeed table. Loading device consisting of: 6 flipper beams with tables including the 2 aluminum profiles 80 x 40 mm per beam, the flippers, the connecting tube, 1 pneumatic cylinder with 24-volt valve. The net loading length is approximately 1.38 m. 1 additional support strand without flipper on the outside of the loader 2 extra cylinder set for the loading device Complete electrical control cabinet with PLC, power supply, Emergency stop safety relay, complete wiring etc. (Including additional electrical wiring for the safety fence door) Label printer package for Beamworks Safety fence on the back of the machine, only on the infeed side. Including entrance door with safety lock And additional protective device on the front to prevent intrusion between the loading strands. Product length measurement with sensor in the protective cover, controlled by the Tigerstop control. The length measurement and download with Tigerlink only work with 90-degree cuts. Tigerlink download software for downloading a csv file (cutting list). Note: The technical data and descriptions are a transcript of the order confirmation at the time. Data is for informational purposes only and is not binding.

Condition: used, mileage: 538,800 km, power: 390 kW (530.25 HP), first registration: 03/2021, fuel type: diesel, empty load weight: 7,736 kg, overall weight: 18,000 kg, tire size: 315/80 R22,5, axle configuration: 4x2, wheelbase: 3,600 mm, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6d, suspension: steel-air, Equipment: ABS, AdBlue, EBS, additional headlights, cruise control, differential lock, electronic stability program (ESP), lane keeping assist, onboard computer, parking heater, retarder, traction control, Urea tank (AdBlue) Engine displacement: 12,902 cc Hydraulics (auxiliary drive) Tipping hydraulics Distance warning system Low-noise Payload: 10,164 kg Push-floor hydraulics Long-haul cab Fgedpfozw Hhmsx Albsg Automatic climate control Sun visor 2 bunks Cooler box Cab with air suspension Subject to errors.

Condition: used, Year of construction: 2012, lifting height: 12,200 mm, fuel type: electric, Weights Empty weight: 3.400 kg Functional Lifting capacity: 350 kg Working height: 1.420 cm CE mark: yes Condition General condition: poor Technical condition: poor Visual appearance: poor Other information Delivery terms: EXW Production country: DE Additional information Please contact Christian Theißen for more information Manufacturer: HAB Model: S142-12E2WD Year of build: 2012 Condition: Used Data: Max. working height: 14,20 m Platform height: 12,20 m Lifting capacity: 350kg Lifting capacity on extension: 350 kg Platform dimensions LxW: 2,44 x 1,15 m Platform length pushed out: 3,64 m Total dimensions LxW: 2,75 x 1,20 m Drive type: Batterie Height transport position with railing: 2,80 m Height transport position without railing: 1,98 m Movable up to working height: 14,20 m Ground clearance: 0,09 m indoor use only: yes Empty weight: 3.400 kg Special features: white tires, anchor points for fall protection systems (PPE) available. Fsdpfxszx Egqe Albegg Information: defective, not working. Location: 41468 Neuss immediately available

Condition: used, Year of construction: 2012, lifting height: 10,440 mm, fuel type: electric, Empty weight: 2.860 kg Working height: 1.244 cm CE mark: yes General condition: poor Technical condition: poor Visual appearance: poor Delivery terms: EXW Production country: DE Please contact Christian Theißen for more information Manufacturer: HAB Model: S124-10 E2WD Year of build: 2012 Condition: Used Data: Max. working height: 12,44 m Fgsdpfx Ajzx Titelbsg Max. platform height: 10,44 m Drive type: Battery Platform dimensions: 2,46 x 0,98 m Lifting capacity: 350 kg Lifting capacity on extension: 350 kg Platform length pushed out: 3,65 m Total dimensions LxW: 2,71 x 0,98 m Height transport position with/without railing: 2,61 / 1,94 m Movable up to working height: 12,44 m Ground clearance: 0,10 m indoor use only: yes Empty weight: 2.860 kg Special features: white tires, anchor points for restraint systems (PPE) available. Information: defective Location: 41468 Neuss sofort verfügbar

Condition: new, maximum load weight: 2,270 kg, overall weight: 3,000 kg, axle configuration: 2 axles, loading space length: 3,140 mm, loading space width: 1,750 mm, loading space height: 300 mm, total length: 4,510 mm, total width: 1,890 mm, total height: 970 mm, Year of construction: 2026, Humbaur rear tipper HUK 303117 with electric pump, allowing for easier tipping with the push of a button. Our price: €6,100 including 19% VAT, plus a delivery fee of 6.4% and vehicle documents! Other models, sizes, and versions are also available or can be ordered and configured individually according to your requirements. Please do not hesitate to contact us; we will be happy to provide you with personal advice! Description: The HUK rear tippers are available as single-axle or tandem-axle models. These trailers are particularly characterized by their galvanized platform with a V-groove outer frame and recessed lashing eyes. The tipping angle is 45 degrees. Technical data: Trailer type: Two-axle Construction type: Aluminum Rear tipper 45° Weight: 692 kg + 45 kg electric pump Total weight: 3,000 kg Payload: 2,270 kg Internal length: 3,140 mm Fjdpfx Alszv Hg Hobogg Overall length: 4,510 mm Internal width: 1,750 mm Overall width: 1,890 mm Internal height: 300 mm Overall height: 970 mm Loading height: 670 mm Tires: 13 inches Equipment: Chassis and tipping platform welded and hot-dip galvanized V-groove outer frame with recessed lashing brackets, tensile force 400 kg per lashing ring Galvanized platform floor (3 mm) Side panels 300 mm, foldable around the perimeter Tow bar locks Conical corner posts Automatic jockey wheel Lighting protected in the underrun protection 3-stage telescopic cylinder Double-acting hand pump

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: NR1060NEU, total length: 1,800 mm, sweeping width: 1,060 mm, empty load weight: 477 kg, construction height: 1,350 mm, drive type: Lithium-Ionen, construction width: 1,150 mm, Scrubber Dryer Chassis Number: NR1060NEU Condition: New Equipment Technical Condition: New Front Tyres Condition: New Rear Tyres Condition: New Battery Voltage: 36V Battery Capacity: 200Ah Battery Type: Waterless Fgsdpfx Aezydvgslbeg Battery Year: 2025 Battery Condition: New Description: The NR1060 is a medium to large front-wheel drive scrubber dryer with twin brushes. - Delivers an efficient cleaning performance of 6,890 m² per hour. - The coarse dirt basket in the waste water tank effectively filters large debris to prevent drain blockages. - The entire machine features a modular and compact design for enhanced manoeuvrability and flexibility. - The low centre of gravity, thanks to the water tank and battery positioning, ensures high driving safety and easy maintenance. - Integrated waterproof touch panel design for intuitive operation: adjust driving speed, water flow, raise/lower brushes, etc. - Large LCD display shows machine settings and simplifies fault diagnostics and maintenance. - Standard electronic water level indicators for fresh and waste water tanks; intuitive and convenient display. Automatic alarm and shutdown when waste water tank is full. - One-touch soft start for the motor with overcurrent and undervoltage protection for the control electronics. - Patented disc brush quick-release design allows for easy automatic loading and unloading of brushes at the push of a button. - ECO mode reduces energy consumption and noise level – ideal for low-noise work environments. - Operating time of 5–6 hours per charge. - Non-slip, durable tyres ensure secure grip and optimal traction, even on smooth or damp floors.

Condition: used, functionality: fully functional, volume flow: 2.28 m³/h, final pressure: 220 bar, power: 15 kW (20.39 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: AC, type of cooling: air, rotational speed (max.): 1,445 rpm, protection type (IP code): IP55, For sale is a powerful and fully equipped hydraulic power unit from the Swiss plant engineering company, Birrer Hydraulik. This system is ideal for demanding industrial applications, plant engineering, or the operation of hydraulic presses and lifting systems. The core component is a robust 15 kW three-phase motor (Euromotori) combined with a high-quality pump from Bucher Hydraulics. A special feature is the complete, immediately ready-for-use control system: via the integrated valve block and the included manual control, several cylinders can be controlled directly and independently of each other. Technical data: Plant engineer: Birrer Hydraulik Motor: Euromotori asynchronous motor, 15 kW (400 V / 28.5 A / 50 Hz), 1445 rpm, IP55 Hydraulic pump: Bucher Hydraulics (Type AP200 26D 218) Flow rate: 38 l/min (corresponds to 2.28 m³/h) Pressure range: Designed for a maximum (final) pressure of up to 220 bar. Control system: Including a complete wall-mounted control cabinet and a robust pendant push-button control with a long cable. Push-button functions: Control elements for motor on/off and the independent control of 3 hydraulic circuits (labeled Tank 1, Tank 2, and Tank 3 – each with up/down). Fjdpfx Aehqx I Eolbogg Condition: Used, straightforward, and robust industrial design. Includes steel tank, valves, and complete wiring. This unit is an excellent complete solution for projects requiring high performance and reliable multi-circuit control.

Condition: like new (used), Year of construction: 2024, Technical specifications: - Motor power 2.2 kW S1 - Max. Saw blade diameter: 350 mm - Saw blade holder: 30 mm - Cutting time per stroke: 1.5 sec. - Speed ​​on the saw shaft: 3800 rpm - Air consumption per cycle: 5 L - Working table height: 900 mm - Extraction nozzle: 2x100 mm - Operating pressure: 7-8 bar - Net weight: approx. 200 kg - Required air flow 1000 m³ / h - Voltage: 400 V / 50 Hz 3-phase - Cutting capacity in mm: 45 x 230 60 x 210 90 x 180 100 x 125 Standard basic equipment: - Saw blade feed pneumatic drive - Automatic engine brake - Set of operating keys - Emergency stop push button - Speed ​​control for saw blade feed - Fixed vertical protection device Fjdpefhbuyjfx Albogg - Upper safety pressure device (pneumatic protective hood) - Suction speed at least 28m / sec. - Colors: basic stand light gray RAL 7035, doors telegrey RAL 7046, protective shield and protective hood zinc yellow RAL 1018

Condition: used, Year of construction: 2017, Overview The Crate inspector was built in 2017 by Germany manufacturer Visiontec. It is adjusted for 0,5l glass bottles and twenty modul crates. The inspector comes with a multi camera system. If an external bottle is detected, the crate will be pushed out in another line. Currently the setup is for a long side leeding crate. Fsdol Hx Ibopfx Albjgg

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with XPLANE cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: Xplane solid steel cutterblock Cutterblock with 3 spiral rows of knives (33 cambered hard metal knives per row), delivery includes full set of knives and a Torx T20 T-wrench; shaft speed 6,000 rpm included; The emission sound pressure level LpA during processing is reduced by 10 dB(A) - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, table surface precision-planed - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at the infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV Fgodpoqlck Nsfx Albog - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2026, Compact wide-belt sanding machine with combination sanding unit Promotional features: - Switching the sanding pad on and off from the control panel - Switching the roller on and off from the control panel - Electronic control system Fox 500 KTR - Table extension with 2 rollers, with infeed and outfeed - Automatic table positioning with push button Article number: 5222100A2 Also suitable for smaller workshops for occasional use Combination sanding unit with sanding pad for fine sanding Standard equipment includes a diagonally grooved steel roller, Ø 120 mm, for calibrating Fine adjustment of the working height Clear control panel on the front Robust, tubular-reinforced monoblock steel machine body, robot-welded, with work units mounted high up for maximum rigidity Motorized height adjustment of the work table with digital display Electronically controlled sanding belt oscillation Carpet feed via geared motor with two speeds Natural rubber feed carpet with a negative profile Flexible steel pressure bar in front of the first unit Rubber pressure rollers, in front of or behind each work unit Fgjdpfjgf Sw Nex Albsg Pneumatic belt tensioning per unit with decimal correction option for grit size/belt thickness Universally applicable for solid wood and veneer thanks to the combination unit Entry-level model for smaller companies Working width 950 mm Equipment details: Combination unit for calibrating and sanding Diagonally grooved steel roller, Ø 120 mm, with fine height adjustment Hard sanding pad with graphite pad Universal design for calibrating and sanding solid wood, chipboard and veneer Technical data Length (product) approx. 1388 mm Height (product) approx. 1668 mm Width/Depth (product) approx. 1545 mm Connection for dust extraction Dust extraction nozzle diameter 140 mm Electrical data Connection voltage 400V Current type AC Phase(s) 3Ph Mains frequency 50Hz Power feed motor 0.33 / 0.55 kW Power height adjustment motor 0.25 kW Power drive motor 7.5 kW Sanding unit Sanding belt length 1525 mm Sanding width max. 950 mm Sanding belt width 970 mm Feed unit Feed speed 4.5 / 9 m/min Workpiece Workpiece height min. 4 mm Workpiece height max. 170 mm

Condition: good (used), Technical data: Manufacturer: BITO Pro Design: left-hand, 24310 Included in the scope of delivery: 1x Holder for push-through safety device, used Material color: Sendzimir galvanized Fedpei El S Njfx Albegg Overall width: approx. 93 mm Overall depth: approx. 93 mm Opening dimension for profiles: approx. 51 x 46 mm (H x W) Material thickness: approx. 3.00 mm Number of hooks: 2 hooks Grid spacing: approx. 50 mm Weight/piece: 0.189 kg

Condition: good (used), Technical specifications: Manufacturer: Dexion Type: P90 Included in the scope of delivery: 01x Console for push-through safety device, used Material color: Sendzimir galvanized Fgodpfx Alsi Ez Saobeg Consisting of: 01x Support bracket, used 02x Inner parts, used 02x Hex head screws M10x25 02x Nuts 02x Washers Ø 10.5

Condition: new, Year of construction: 2026, Standard equipment: - Thread cutting device - Control panel with OLED display - Robust, high-quality drill head cover - LED lighting - Quickly adjustable and ergonomic drill depth stop - Stepless speed control via rotary knob - Thermal overload protection - Spindle stop - Drill protection with electrical fuse - Connection cable with CEE plug - Mechanical feed of the Z-axis - Incl. electromagnetic clutch for 3 feed speeds - Drill cross with push button - In thread cutting mode: Right/Left TECHNICAL DATA Continuous/normal drilling capacity (mm) R1 - 30/35 (in E335/ST60) R2 - 27/32 (in E335/ST60) R3 - 35/40 (in E335/ST60) Fgsdpslfdufofx Albeg Thread cutting capacity max.: R1 = M30x3.5 / R2 = M24x3 / R3 = M36x4 Spindle MK IV Drilling depth: 160 mm Overhang: 300 mm Column diameter: 140 mm Usable table surface (W x D): 590 x 450 mm Speed display: digital Drilling depth display: digital Drilling depth stop with fine adjustment Table height adjustment with rack and pinion Spindle/table: 150-700 mm Spindle speeds stepless: R1 (1-stage) 0-1,000 rpm R2 (1-stage) 0-1,600 rpm R3 (2-stage with reduction gear) 0-4,000 rpm Optionally R1 or R2 without additional charge Additional charge for R3: € 2,250 Accessories drilling package 6 (€ 910.00) - Vise [felix] 2.0 150 - Taper shank MK IV/B18 - Reducing sleeve MK IV/MK II - Reducing sleeve MK IV/MK III - Quick-change drill chuck B18 3-16 mm (accuracy 0.17 mm) WARRANTY: 3 years (single-shift operation) DELIVERY: Free to your site including packaging NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: new, Semi-automated nailing machine for production of complete pallets in two steps. How does it work? Blocks and leg boards are fed manually in the left fixture. The machine nails the parts together automatically. The ready-made legs are moved by hand to the right fixture, where deck boards are manually placed on top of the legs and nailed together automatically. Both fixtures run simultaneously. The machine starts by pushing a button and the finished pallets are manually pushed out in the back of the machine. Mychrome has various additional machinery that can easily be docked on to existing machines in order to build a longer line where more stages can be automated. The possibility to modify the design and the size of the pallets is still available with the additional machinery. Pallet size: Min / max length of deck & legs: 600 mm - 1 600 mm Min / max width of deck: 600 mm - 1 300 mm Specifications: Operators | 2 Length | 3,5 m Height | 3,6 m Power | 14 kW, 3x400 V+N Fgsdpfx Alsl Awy Djbsg Pneumatic system | 7 bar compressed dried air: 300L/min Should be filled and controlled | Container for lubricating oil Machine capacity | 500 pallets/8h Standard equipment: 1 channel for legs 1 channel for pallet assembly 1 pallet matrix interchangeable 1 leg matrix adjustable Operators terminal for production control Program for saving nail positioning Nailing System | Hydraulic beam nailing, 3 nail boxes, 30 nailing hammerheads

Condition: used, mileage: 178,613 km, power: 118 kW (160.44 HP), first registration: 06/2010, fuel type: diesel, overall weight: 4,600 kg, next inspection (TÜV): 09/2028, color: white, gearing type: mechanical, emission class: euro5, Year of construction: 2010, Equipment: air conditioning, Internal vehicle number: G170470 Available immediately at our yard in Kaufungen More information at: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) The auxiliary battery needs to be replaced. Sewer inspection vehicle RCA proline with satellite inspection system Vehicle features: - Mercedes-Benz Sprinter 516 CDI, panel van, color: white - First registration: 06/2010, registered as a self-propelled working machine, green license plate - Wheelbase: 4025 mm - Gross vehicle weight: 4,600 kg - Engine power: 160 hp - Reinforced front axle (spring + damper) - Reinforced front axle stabilizer - Rear axle stabilizer under the frame - Reinforced shock absorbers - Roof and rear door, tall version - Auxiliary hot air heater - Rotating beacon, yellow, front left/rear right - Rear door, two-wing, 270 degrees - Mileage: approx. 178,613 km TV inspection system - RCA proline with satellite - Control unit RCA proline - Cable drum ELKA 600 with approx. 380 m of camera cable Fgsdpfx Aljzpcx Eobsg - Cable drum K15 sync. with approx. 120 m of camera cable and 1 separate push cable with approx. 40 m - Swivel jib with winch for lowering the camera/carriage - 1 carriage L 135 for main pipes DN 135 to DN 1500 - 1 carriage L 100 cross DN 100 - DN 500 - Additional lighting, halogen, inclination measurement, and deformation measurement - M-series, satellite inspection DN 135 - DN 1500 - Computer package with monitors - Rear view camera with monitor for the driver to position the vehicle when the rear doors are open - Water tank - Power supply via gel batteries Financing example: * Internal number: G170470 * Purchase price: 29,500.00 € * Down payment: 10% * Term: 60 * Monthly rate: 468.31 € Residual value: 5,980.00 € If you are interested in this offer or would like to adjust it to your needs, please contact us (Mr. Enchev). We look forward to your call. Errors and omissions excepted. We will gladly accept your used vehicle as a trade-in. Financing is possible directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.