Used Cut And Drill for sale (24,320)

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Lrjdpfehzbipjx Ad Nsg Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, operating hours: 11,500 h, machine/vehicle number: 3098, laser power: 10,000 W, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, working width: 2,000 mm, travel distance X-axis: 4,020 mm, travel distance Z-axis: 150 mm, Machine was overhauled in 2024. TECHNICAL DETAILS Working area: 4,020 mm Processing area: approx. 4,000 x 2,000 mm Maximum sheet thickness: 30 mm Maximum steel thickness: 30 mm Laser cutting head: EX-TRABEAM® Pro Laser source: IPG YLS 10000 U fiber laser source Laser power: 10,000 W Power: 10 kW (13.60 hp) Traverse speed: up to 100,000 mm/min Z-axis positioning speed: 18 m/min Z-axis travel: 150 mm Z-axis acceleration: 0.75 G Drilling Drilling range: Ø4 mm – Ø30 mm Holder: HSK-63 Thread cutting range: M5 – M20 Max. material thickness: up to 25 mm Power: 21 kW Revolutions: up to 10,000 rpm Tool cooling: internal cooling Tool change: automatic Drilling tool measurement: automatic MACHINE DETAILS Ambient temperature: +10 °C to +35 °C Relative humidity: 0 to 90% Filter system: Donaldson DFPRO 6 Cyclopeel Fan capacity: 7.5 kW Volume flow: 4,500 m³/h Mechanics and Control Drives: maintenance-free Panasonic AC servo motors Measuring system: IRC 2500 (incremental encoder) Hold-down device: pneumatic Chip brush: available Laser hours: 6,900 h EQUIPMENT Documentation/manual Cooling unit Safety light barrier Fully automatic shuttle table Fully automatic HSK 63 drilling spindle Cleaning and calibration station LU3K Lrodpfxewyaxms Ad Nsg Automatic nozzle changer with 8 nozzles Donaldson® filter unit DFPRO 6 Cyclopeel Asper Nesting® automatic nesting software Witt gas mixer Maintenance and support contract

Condition: used, Table Drilling and Thread Cutting Machine IXION Type BT 15 GL Machine no.: Year of manufacture approx. 1975 Drilling capacity: 15 mm Spindle mount: Taper B 16 Thread cutting range: M 2.5 to M10 Throat depth: 200 mm Quill stroke: 90 mm Table size: 285 x 220 mm Column diameter: Ø 75 mm Spindle speed: 320–1600 rpm, 4 steps Lredpfx Adowk Nxqe Neg Motor power: 0.55 kW Power connection: 380 Volt, 50 Hz - Spindle speed adjustable in 4 belt stages - Equipped with FAHRION GH 10 tapping attachment - With thread pitch guide bush, operation without guide bush also possible - Drill head height adjustment via hand crank - Column lowers from table plate for drill head height adjustment Required space (L x W x H): 650 x 420 x 900 mm Weight: 86 kg Good condition

Year of construction: 1997, condition: excellent (used), I sell the drilling machine with cutting saws COMEC FM0V8 2000, Year 1997. Working width up to 2000mm Configuration: 0 motors from under 1+1 motors from sides / angular adjustable 2 motors from back / heads angular adjustable 2 motors from top / heads angular adjustable 4 pcs. material pressure from top 2 pcs. cutting saw aggregates / heads angular adjustable Lrodoh H S Hwjpfx Ad Nog Atypic 5-spindle drilling heads included 3 x 15mm / 2 x 25mm. Drilling heads in price. Very good condition. Available immediately.

Condition: excellent (used), Year of construction: 2005, I sell the throughfeed drilling machine with cutting saws and milling heads Rilesa Flex Lredovylwcepfx Ad Neg Configuration: 1+1 precise cutting saws from sides 1+1 drilling head motors from sides 1+1 milling heads from sides 4 pcs. drilling head motors from top 3 pcs. drilling head motors from back Entry feeding magazine for elements. Backfeeding system of conveyors to return the elements to the operator. Very good condition. Available immediately.

Condition: good (used), Year of construction: 1990, I sell the combined tenonging machine with drilling head BALESTRINI I2F 1 tilting table with pneumatic material pressure. Automatic cutting saw from bottom. Tenoning milling head able to do the finger-joint as well. Drilling head for dowel holes production 3 spindles. Revolving 360° enabling any position. Feeding automatic. Positioning on end-sensors. Lodpfx Aohw Dfnod Norg Available immediately.

Condition: new, Year of construction: 2025, - Thread cutting device - Control panel with OLED display - LED lighting - Quickly adjustable and ergonomic drilling depth stop - Continuously variable speed control via central rotary knob - Thermal overload protection - Spindle stop Lodjfx U D Aspfx Ad Norg - Drilling protection with electric. Protection - Connection cable with Schuko plug TECHNICAL DATA - Spindle: B16 - Drilling depth: 60 mm - Projection: 220 mm - Column diameter: 70 mm - Spindle/work surface: 140 – 315 mm - Drill head height adjustment: by hand - Speed display: digital - Drilling depth display: digital - Feed (mm/revolution): by hand - Spindle speeds continuously variable: 60 – 6,000 rpm - Continuous/normal drilling capacity: 10/12 mm - Thread cutting capacity (depending on pitch): M6 - FACTORY WARRANTY: 3 years (single shift) - OPTION drilling package 1 (No. 296570) Machine vice Flott [felix] 2.0 80 and keyless drill chuck 1-13 mm (accuracy 0.17 mm) Price: € 275,- - FREE DELIVERY (Germany only) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: used, Year of construction: 1985, machine/vehicle number: 5801, Plate drilling and burning machine FDB 600, The Peddinghaus FDB 600 plate processor from the Peddimat product range is suitable for automated drilling and oxy-fuel flame cutting of flat steel and steel sheets in steel construction. CNC control SIEMENS SINUMERIC drill diameter: min ø 8, max. ø 40 mm, inner coolant drilling system Number of drilling agregates:3 pcs. Cutting system: Autogen burning equipment total power requirement: 30 kW max. workpiece height: 600 x 50 x 6000 mm Min. material size: 80 x 8 mm sheet thickness - min.:6 mm sheet thickness - max.:50 mm dimensions of the machine ca.:2,4 x 2,4 x 2,8 m Lsdpfx Aeibq Itjd Norg Lead roller conveyor: 6 m Outside roller conveyor: 1 m weight of the machine ca.: 6,5 t

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 0401-240027, product height (max.): 50 mm, product height (min.): 8 mm, product length (max.): 6,000 mm, product width (max.): 600 mm, product width (min.): 80 mm, TECHNICAL DETAILS Maximum workpiece size: 600 x 50 x 6000 mm Minimum workpiece size: 80 x 8 mm Drilling system Number of drilling spindles: 3 pieces Maximum drilling diameter: 8 - 40 mm Drilling tool: HSS cooling channel drill Cutting system Cutting process: Autogenous Cutting gases: Acetylene and oxygen (conversion to other media possible) Material transport Transport mechanism: Roller measuring feed Control and software Control: Fagor 8055i CNC CAD data formats: DSTV, DXF MACHINE DETAILS Total power requirement: 30 kW Machine weight: 6.5 t Lrsdpfxevytiys Ad Neg Machine dimensions (L x W x H): 2,000 x 1,900 x 2,800 mm Additional equipment: Filter system for cutting smoke extraction

Condition: ready for operation (used), Technical characteristics fully automatic center type QUADRA ES205 V04 Bar loading magazine o Max bar length 7500 mm o Minimum bar length 3000 or 1550 mm o Load capacity with axis 100 mm : 20 bars o Load capacity with axis 200 mm: 10 bars o Maximum loadable weight: 500 kg Bar positioning unit o Max bar length : 7500 mm o Minimum length of manually loaded bar: 500 mm o Carriage translation speed: 0.60 m/min Milling section 4 machining units o Drilling o Milling o Tapping up to M8 on thicknesses up to 4 mm (aluminium) o Sawing (aluminium) cut 0/90° and +/- 45 Sawing machine Evacuation section Finished parts magazine Power and Motors Ljdpfoundhfjx Ad Njrg Power: 35 Kw Overall dimensions Weight: 8420 Kg

Year of construction: 2024, condition: new, Plasma sheet cutting, combined with drilling and tapping Heavy-duty gantry type cutting system combined for drilling, plasma and oxy-fuel cutting applications. Double-side drive, precise positioning system with rack and pinion on 3 linear axes and zero-backlash on the torch rotational axes. Reinforced construction of the gantry and drives to handle the heavy load during drilling applications. Low backlash, precision gears, as well as highly rigid and precise rail guiding system enable the smooth motion and excellent cut quality in corners and small holes. Transversal motion range (Y axis) -- on request Longitudinal motion range (X axis) -- on request Vertical motion range (Z axis) -- 500 mm KEY FEATURES: ▪ Fully automated technology for program creation and execution ▪ Program based on 2D part drawing ▪ Drill / tap operations assigned to single or multiple holes with the same diameter ▪ Automatic part nesting and rapid moves between holes and parts with different strategies ▪ Automatic tool change, fully programmable, no operator intervention needed ▪ Single program zero position for the complete drill and plasma cut processing in a single program. Just as normal sheet cutting process, no special settings or procedure required from the operator ▪ Automatic measurement of distance from the drill tip to the material. No measurement by operator needed ▪ Automatic tool cooling on-off control ▪ Chip -breaking drill head motion control with programmable parameters ▪ Automatic program head control ▪ Drill head moves to safe position automatically after drilling is done ▪ Plasma head automatically moves to start of cut position, searches the plate and starts cutting ▪ Plasma head moves automatically to safe position after plasma cutting is done ▲ DRILL HEAD up to 29kW max. drill tool diameter 40mm Ledpfxjh I Eito Ad Nsrg ▲ PLASMA CUTTING EQUIPMENT HYPERTHERM -- on request ▲ INSTALLATION AND TRAINING INCLUDED Approximate installation and training period - 15 days

Condition: as good as new (ex-display), Year of construction: 2018, The TAC CNX is a fully automatic machine that can cross cut straight or angled, coupled with a CNC vertical drilling unit and vertical hopper feed loading leading device. This means a combined operating cycle of feeding, drilling and cutting with no manual operator intervention. The TAC can also just be used for crosscutting if so required. The saw unit cutting angle automatically adjusts to the required angle from the program, while the drilling group is controlled in 3 axis with a 5 spindle point to point head. Programming is quick and simple thanks to the integrated colour graphic touch screen controller. The saw and drilling units are both located in an enclosed safety cabin with electrically interlocked doors, this giving the operator the highest level of protection. The machine is ideal for cutting and drilling for sofa / chair frame rails / parts, general furniture parts, plastics and / or aluminium extrusions. Specification - Heavy duty thick steel monobloc frame electro welded. - Automatic vertical loading system with length capacity upto 1350mm (longer on request). - Feeding via self centering grippers. - Special grippers to allow loading of / feeding of 2 pieces together (on top of each other). - Automatic step advancement movements of the material to be drilled / cut controlled by the NC on the X axis. Programmable movement from 1 to 1050mm, advancement speed max 60 mt/min (adjustable). Special 'macro' for back movement of the piece for material saving. - Outfeed motorised exit conveyor belt for cut / drilled parts 600mm long x 75mm wide. - Saw unit with 4kw motor/ 2800mm adjustable through inverter up to 4000 rpm. Automatic rotation of the sawblade +/- 60 degrees controlled by the CN. - 5 spindle in line vertical point to point drilling unit controlled on 3 axis by CN. - Easy programming with dedicated software with 12" screen an operator interface - Total protection of the the working cabin, interlocked doors with inspection windows. - In conformity with CE safety rules. Working dimensions - Length feeding in one operation 1 to 1000mm (can be increased by setting more positioning steps of the loader. - Width 10 to 200mm cutting at 90 degrees. - Width 10 to 150mm cutting at 34 degrees. Lrodpfx Adjv Aalye Neg - Thickness 10 to 80mm. - Productivity approx 3 seconds per operation (feeding, drilling, cutting = 9 seconds) Complete with optional Vertical hopper feed loader with 3m length capacity Year - 2018 CE Condition - As new ex display [ only used for demonstrations.]

Condition: new, Titan DrillCut – Flexible Cutting and Drilling Center for Maximum Efficiency The Titan DrillCut is a powerful CNC machining center that combines thermal cutting (plasma or oxy-fuel) with precise drilling and thread cutting in one machine. The robust gantry design ensures vibration-free processing even with heavy material thicknesses up to 200 mm. Equipped with the integrated VarioDrill system, it allows for efficient, non-hardening machining of holes from Ø 6 to 40 mm as well as thread cutting from M4 to M20. An automatic tool changer enables rapid switching between drilling, countersinking, and threading – ideal for automated production processes. Lsdofz A I Eepfx Ad Nerg This machine is the perfect solution for steel construction, mechanical engineering, and industrial metalworking, where utmost precision, flexibility, and production speed are essential.

Condition: good (used), D and D Stainless cutter Lederwz I Aspfx Ad Norg Stainless guillotine, mounted on conveyor, previously used for cutting cakes and honeycomb, conveyor dimensions 2200mm x 640mm, adjustable dwell and cutting time, variable speed, 3Ph

Condition: new, Randek intersection saw SPL728 Computer controlled, revolving, with LAN (Ethernet) connection for downloading or storing sawjobs (text file in ASCII format). The number of programs that could be stored is limited only by the size of the hard disk. Through the graphical touch screen (HMI), the operator is able to track all details directly on the screen or direct the saw directly to minimize disruptions in the production run. Sawblade: Heart metal, low noise, 700 mm Ø / 116 teeth, 360 ° horizontal swivel, Lodpfofg Tatsx Ad Nsrg 90 ° -28º inclined, 250 mm entry depth Engine performance 7.5 kW. Automatic closed-lock plastic protective screen. Supply bank, selectively 4.0 / 5.8 / 8.2 / 10.6 m long Driving role, IRO4-120, driven. Transport roll 76 mm Ø, roll length 400 mm, roll spacing C / C 500 mm. Return value 120 mm. Pressing device, pneumatic, 2 piece Select direction from left or right. Delivery bank, optionally 5.8 / 7.0 / 8.2 / 9.4 / 10.6 / 11.8 / 13 m long Computer controlled rolling stock type LX. Execution guide, rollers 76 mm Ø, length 400 mm. Hinged hooks 120 mm. 2 computer-controlled longitudinal locks, driven by gear belts. Hump ​​1 - designed for cutting lengths up to 50 mm. Note 2 - runs over the entire length of the carrier bank. The positioning of the longitudinal abutment and the setting of the cut angle requires independent computer control. Maximum speed of longitudinal contact 1 m / s. Wooden furniture: 1 piece Return devices: 2 pieces Direction: select from left or right

Condition: like new (used), functionality: fully functional, Year of construction: 2014, Our company is offering for sale a Sandvik DD210V One Boom Face Drill Rig for tunnels up to 25 m² UNIVERSAL 360 GRADE, "as new" condition,purchased directly from France and not used. The sale is due to the postponement of a planned project. Price: €330,000 Location: Albania Condition: As new – fully original machine, inspected, tested, and repainted. Main Technical Data: Manufacturer: Sandvik , Model: DD210V One Boom Face Drill Rig for gallery section up to 25m2, Year of manufacture: 2014, Operating hours:935 hours (767 drilling only), Engine: Deutz water-cooled, Power (Power Pack 1): 45 kW (60 hp), Electrical supply: 380V–440V, 60Hz; Boom: B14NV; Feed (Left): NTV 6/10 Split feed; Drifter (Left): HL510Bar; Ansul Fire Suppression System. Ledpjxpvyvofx Ad Nerg

Condition: excellent (used), functionality: fully functional, overall weight: 23 kg, Year of construction: 2016, machine/vehicle number: 20161500027, Cutting of openings up to a maximum depth of 400 mm is possible in several work steps. Suitable for creating cut-outs and channels in concrete or masonry. Optimized engine performance thanks to efficient cylinder design, digital ignition system, and X-Torq engine technology. Cutting disc pair with very stable core and excellent cutting performance. Lrsdpfx Adexnm Ihs Neg

Condition: used, Year of construction: 2014, Serial number: 2xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21943 Specifications: Year model: 2014 Engine hours: approx. 6000 Power: 105 kW Weight: 11,000 kg Undercarriage (see photos) Remote control Winch Track width: approx. 25 cm Machine width: approx. 220 cm Ledpfx Aox Anausd Norg Newly overhauled engine Newly overhauled hammer, used approx. 20 hours after overhaul Stage 4 engine Screen backlight is slightly weak Description:Sandvik Dino DC400RI drilling rig from 2014.Both the engine and the hammer have been overhauled. The engine has run approx. 1000 hours since the overhaul, while the hammer has only been used for a couple of weeks.Some minor leakage/sweating.Can be delivered at short notice.See video. Own weight: 11000 Engine hours: 6000 Model: Dino DC400RI Borerigg. Overhalt motor og hammer SE VIDEO

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 4550 PROFILE CUTTING AN PROCESSING CENTER ( 9 AXIS & 10 STATION ), - In aluminum and PVC profiles; Grooving, hole drilling, marking, cutting at different angles, etc. Ability to perform operations - 10 special air-cooled spindle motors for high-speed aluminum - Axis speeds averaging 120 m/d - Precise 3-axis profile holding station - Profile feeding capacity 7 pieces - Profile machining length maximum 6500 millimeters / minimum 600 millimeters - Automatic profile length detection - Windows-based, easily adjustable user-friendly interface - Data transfer via USB, Online remote monitoring system - Remote connection support - 23.8" Touch high-performance touchscreen - 30 - 150 degrees between, +- 0.1 degrees servo-controlled cutting unit that allows precise cutting - Transporting the cut waste profiles to the collection cart with automatic conveyor system Ledpfx Adsrcm Rue Norg STANDARD EQUIPMENT - Ø550 Millimeter saw - Automatic waste chip conveyor discharge unit - Barcode printer OPTIONAL EQUIPMENT - Compatibility with CAM programs - Optional length - Output conveyor with belt system - Safety barrier (Sensor)

Condition: reconditioned (used), Year of construction: 2024, functionality: fully functional, Cape Woodworking corner saw / brand station module. Lrsdpfx Ajvw Rm Rsd Njg Designed for cutting pallet corners, the saws include chippers so that only sawdust remains. The machine has had minimal use but has been completely overhauled and comes with a new control cabinet (PLC touchscreen). Supplied with doors and safety systems if desired. It can be integrated into an existing pallet line and is also perfectly suited for small-scale production or manual assembly. We also offer a separate MTC corner saw, a standalone MET brand station, a separate MX2 milling station, a standalone VP turnover station with chain conveyor, and a separate APR pallet stacker for sale. A T3C block saw and AT block inserter are also possible. In addition, we offer more Cape woodworking machinery such as: CP110 long chain conveyor with 11 pushers, Joulin vacuum mats, nail boxes, etc. Please contact us for more information.

Condition: excellent (used), For sale: professional cutter and drill bit sharpener, model PP U3. Condition: very good, complete unit ready for operation. Included in the set: • Set of grinding wheels • Adjustable angular tool holder • Workshop lamp with flexible arm • Keys and clamping elements Specifications: • For sharpening cylindrical and spiral end mills • For sharpening step and cylindrical drills • Wheel linear speed up to 35 meters per second • Maximum noise level: 66 dB • Machine weight: 41 kg Lrsdpfxjxdh Hqo Ad Njg Solid, stable construction—ideal for precise tool machining. A reliable solution for tool rooms, CNC workshops, and machine shops.

Condition: used, New, unused, sharpened and used end mills and drills for CNC machines as shown. length: Miscellaneous diameter: Miscellaneous Lredpfx Aovy Apijd Neg Shank: Miscellaneous mass: 12 kg Application: woodwork

Condition: used, Balestrini brand drilling cutter head model 1.2.F. serial number 1120, used. Lodpfx Astt E Swod Nerg

Condition: ready for operation (used), Year of construction: 1990, MARKON Log house drilling machine with undercutter year 1990 manufacture Markon Lathi / Finland Length = 3550mm Width= 1500mm Height= 2910mm Engine power Drilling unit: 6 x 3 kW moulder: 1 x 5.5 kW Dimensions of the log to be pushed Height max 250mm Height min 130mm Width max 250mm Width min 60mm Length min 600mm Tool sizes and speeds Drill max diameter 40 mm Moulder max diameter 250 mm Drill length 325 mm Drill mounting arm diameter 20h7 mm Drill rotation speed 2880 rpm Moulder: rotation speed 2880 rpm AIR Suction openings dia. 160 mm 2 suction openings Drill unit suction opening diameter 90 mm Lodpfofw Rt Rjx Ad Nerg Suction openings 6 pcs Air speed at the suction opening 30 m / s Air consumption 8460 m3 / h electrical connection Total power 380 V 24 kW Compressed air connection Minimum pressure 6 bar Drilling unit air demand / stroke "48 1 Total air demand ~ 2200 1 / min incl. 3,5 meter roller conveyor + 12 drillings

Condition: new, Year of construction: 2025, ML750 Inner chase size 750 X 520 mm Max. die cutting size 750 X 520 mm Working speed 28±2 s/min Max. rule length ≤15 m Motor power 2.2 kW Ledevv R H Uepfx Ad Nsrg Weight 2000 kg Overall machine dimensions 1650 X 1540 X 1650 mm