Used Press Punch for sale (28,626)

Condition: excellent (used), 4 x multi block of 835mm long 4 x upper die of 835mm long the dies are in good condition for specifications and dimensions see photos Codjwlcixopfx Af Ijrh

Condition: excellent (used), Year of construction: 2014, Operating hours: 78,000 hours 5 kW resonator Annual maintenance by Trumpf Codpfswd Ng Ujx Af Ierh

Condition: excellent (used), Year of construction: 2018, operating hours: 21,346 h, functionality: fully functional, laser power: 3,200 W, X working area max.: 3000 mm Y working area max.: 1600 mm Control: Rexroth IndraMotion MTX Laser power: 3000 watts Machine - Enclosed machine frame - Hybrid axis system - Linear magazine with 20 slots for clamps and tools - Hydraulic clamps (3 pieces) - Maintenance-free three-phase motors for drives - Repositioning device with programmable hold-down - Foot pedal for clamp closing - Beam protection with direct access - Parts chute on the right - Parts flap on the left - Sensor for parts flap - Work area illumination - FocusLine - Retrofittable for SortMaster Compact - Protective tool - Transport and installation device TRUMPF Laser - Laser light cable (LLK) according to standard layout (10m) - Laser power control - Laser logbook function - Closed beam guidance via laser light cable (LLK) - Separate power supply for TruDisk Compact Cutting Unit - Solid-state laser compact cutting unit - Protective glass Cjdpfxsxhmtwe Af Isrh - Collision protection - ControlLine Punching Head - Delta Drive - Rotatable mono-tool adapter - Programmable hold-down position - Tool length compensation - Punch spray lubrication - Punch slug extraction - Forming function - Stroke counter for punch Control - TRUMPF control based on Rexroth IndraMotion MTX - Touch panel with 19'' TFT color screen - Integrated technology data - Programmable cutting gas pressure - Remote support interface - Auto shut-off with wake-up function - Program management - Production plan Data Transmission - USB interface - RJ-45 network interface - Central Link - Online Update Manager Safety - CE marking - Two-beam safety light curtain Extended Standard Equipment - TruDisk 3001 solid-state laser with 1 LLK output - Chiller (water-air) - Compact dust extraction system - 1st locating pin (right inside) - Ball tables - Good parts container for parts chute - Chip container for rear removal Extended Laser Equipment - Copper cutting package - Brass cutting package Extended Punching Equipment - MultiShear function - Multitool function - MultiBend function - Thread forming with thread counter Thread former breakage monitoring Lubricant level monitoring - Marking/fast embossing function - Engraving function - Deburring and roller technology function - Ejecting small parts function Parts Ejection - Integrated sorting function for parts chute • Sensor for parts chute • Tray line for 4 standard trays 300 x 400 mm • Customer-supplied trays Extended Machine Equipment - 1x additional clamp - Machine rated for ambient temperatures up to 43°C Special Sheet Metal Processing - Brush tables - Warping detection Options for Compact Dust Collector - CO2 extinguishing system for the compact dust collector Data Transmission - Wireless Operation Point Machine Accessories - 1 set RTC cassettes incl. die plate SheetMaster Compact - SheetMaster Compact 3000 x 1500 mm (AK05) • Loading station with spreader magnet for sheet separation • Suction frame • Vacuum sensor system • Double sheet detection • Unloading cart for scrap grid and microjoint sheets • 2nd operator's station for loading and unloading.

Condition: used, functionality: fully functional, Year of construction: 2007, punching force: 80 t, Hydraulic Punching Machine GEKA Brand: GEKA Model: HYD 80 S Serial No.: 14981 Year: 2007 Punching force: 80 tons Number of stations/positions: 5 workstations (the machine allows for 2 simultaneous work positions in the Hydracrop series). Throat depth (S version): 300mm Punching capacity (typical examples): up to Ø 40x14mm Flat bar shearing: e.g. 450 × 15mm Profile cutting (L angles): typical values around 130×130×13mm Cedpsxgdf Usfx Af Isrh Round: 45mm Square: 45mm *Delivered with 10 sets of punches and dies No.6 from 4 to 28mm of your choice

Year of construction: 1999, condition: ready for operation (used), General Data Machine weight 17000 kg Main Drive Number of axis 2 Max Material Thickness Steel 6 mm Credexf N Skopfx Af Ijh Stainless steel 3 mm Aluminium 6 mm This Nisshinbo HIQ-1250 was manufactured in 1999. It is a turret punch press with a working range of 2500 x 1250 mm, handling sheet thickness up to 6 mm for steel and aluminium, and 3 mm for stainless steel. It features a pressing capacity of 22 tons and a ram stroke of 50 mm. If you are looking to get high quality punching capabilities consider the Nisshinbo HIQ-1250 machine we have for sale. Contact us for more information. Application Types Punching

Year of construction: 2004, condition: ready for operation (used), An NDC hydraulic punch is available. Weight: approx. 1750kg. An on-site inspection is possible. Codpfxsxfbcns Af Ierh

Condition: used, Pneumatic toggle press BURGER type D04 No. 4497 Year of construction approx. 1972 Compressive force max. 6 ton. Projection 150 mm ram stroke 39 mm Table size 340 x 270 mm Drop-through opening Ø 46 mm Installation height max. 160 mm Tool holder Ø 25 mm ram plate Ø 90 mm Pneumatic operating pressure 5 bar Mains connection 220 V 50 Hz - Pressure regulator for press force adjustment Cedpfx Ajvcdvpof Isrh - stroke height adjustment 7, 21, 40 mm - electric foot switch - Table height adjustment Space requirement L x W x H 700 x 500 x 1300 mm Weight 240 kg good condition

Condition: good (used), Year of construction: 2000, Punching Press Manufacturer: EHT Model: Strippit 1500/30 Year of manufacture: 2000 CNC control: Fanuc Working area without repositioning: 2500 x 1500 mm Max. material thickness: 8 mm Credsul S Eajpfx Af Ioh Punching force: 30 t Turret with 46 tool stations, including 4 D-size index stations 3 programmable clamps Metal table Used exclusively in single-shift operation Including WILSON TOOL tooling

Condition: good (used), Year of construction: 2010, operating hours: 49,000 h, functionality: fully functional, working range: 2,500 mm, punching force: 165 t, workpiece weight (max.): 120 kg, laser power: 2,000 W, punching diameter: 76 mm, overall weight: 13,000 kg, workpiece length (max.): 2,500 mm, sheet thickness (max.): 4 mm, sheet thickness aluminum (max.): 4 mm, sheet thickness steel (max.): 4 mm, space requirement length: 6,800 mm, space requirement width: 6,150 mm, Equipment: cooling unit, safety light barrier, Special Equipment: + Thread forming function + Softpunch function + Height-adjustable clamping shoe + Follow-up cylinder + Vibration-damped installation + Sensor for part chute + Die spray lubrication + Loading and unloading aid with brush Standard Equipment: - Robust C-frame - Coordinate guide with integrated linear magazine - 21 stations for tools and clamping shoes - 2 clamping shoes - Drives: maintenance-free three-phase servo motors - Brush tables - Laser TCF1 (2000W) - HI-LAS high-pressure cutting - High-speed processing with SprintLas - Programmable cutting gas selection/pressure adjustment - Laser cutting head with 5" lens - Quick-change device for cutting head - APC capacitive height control - Lens monitoring sensors - Laser logbook function - Compact dust extractor - Rotatable tool holder - Automatic follow-up device with hold-down - Automatic part chute for parts 300x500 mm - Automatic tool changer with 19 stations - 2 clamping shoes - Good parts container - Punch spray lubrication - 2nd lubricant container - Punch slug extraction - Chip bin - Hydraulic quick shutdown - External control panel - TFT color touch screen 15" - Interface for USB stick Codpfx Afow Au Eas Isrh - 3.5" disk drive - Safety devices - RJ45 network connection - Network connectivity - Comprehensive operating manual - Remote diagnosis system

Condition: used, Year of construction: 2007, operating hours: 71,182 h, functionality: limited functionality, punching force: 22 t, workpiece weight (max.): 230 kg, laser power: 2,700 W, tool length: 37 mm, punching diameter: 75 mm, positioning accuracy: 0.01 mm, overall weight: 15,000 kg, workpiece height (max.): 30 mm, workpiece length (max.): 3,700 mm, workpiece width (max.): 1,500 mm, positioning speed: 90 m/min, sheet thickness (max.): 8 mm, sheet thickness aluminum (max.): 4 mm, sheet thickness steel (max.): 8 mm, sheet thickness copper (max.): 4 mm, sheet thickness brass (max.): 4 mm, cutting force: 200 t, compressed air connection: 6 bar, repeat accuracy: 0.01 mm, space requirement height: 2,400 mm, space requirement length: 18,000 mm, space requirement width: 9,100 mm, Equipment: cooling unit, safety light barrier, The machine will be available from week 42 as agreed. Additional equipment: - Widening of the C-frame, allowing loading of sheets up to 3800 x 1500 mm with the SheetMaster Credpfx Aoxa Dx Usf Ioh - Laser TruFlow 2700 - MultiTool function - Thread forming function - Marking/High-speed beading function - MultiBend function - Roll technology - Post-processing cylinder - Warping detection - Chip conveyor Loading and dismantling must be carried out by the buyer! Condition: used Scope of delivery: (see image) (Specifications and technical data are subject to change and errors excepted!) Further questions can be answered by phone.

Year of construction: 2005, condition: ready for operation (used), Control Unit Brand FANUC Credjxfmluepfx Af Ijh Model 180i-PB Movement X-Axis Movement 2500 Y-Axis Movement 1270 This AMADA EM2510NT was manufactured in 2005. A robust turret punch press, it features a FANUC 180i-PB controller, punching force of 200 kN, and can handle sheet thickness up to 6.3 mm. Its large working area includes X-axis movement of 2500 mm and Y-axis movement of 1270 mm. Consider the opportunity to buy this AMADA EM2510NT turret punch press. Contact us for more information about this machine. Application Types Punching

Condition: good (used), functionality: fully functional, Year of construction: 2008, Suteau Anver 137 16×6 – 60t Hydraulic Cutting Press Year of manufacture: 2008 General Description The Suteau Anver 137 is a robust and powerful hydraulic cutting and punching press with a pressing force of 60 tons. It is ideally suited for the precise processing of a wide range of flexible materials and is particularly sought after in the packaging, textile, leather, and foam industries. Thanks to its solid construction and reliable hydraulics, this machine remains highly durable and efficient even after many years of operation. Csdpfx Afexay Ure Iorh Technical Data Manufacturer: Suteau Anver (France) Model: 137 16×6 Year of manufacture: 2008 Pressing force: 60 t Working area: 16 × 6 (approx. 4.9 × 1.8 m, converted from feet) Machine type: Hydraulic travelling head press / beam press Applications: Cutting and punching of flexible materials Features Very good technical condition Sturdy construction, suitable for continuous operation Easy to operate and low-maintenance Ideal for precise cutting and punching Supplied with complete documentation Application Areas The machine is excellently suited for processing: Foam Rubber Felt Leather and textiles Cardboard and packaging materials Conclusion The Suteau Anver 137 16×6 is a reliable and versatile hydraulic punching press with 60 tons of pressing force. Built in 2008 and well maintained, it offers excellent value for money for companies that prioritize quality, efficiency, and durability.

Condition: used, Hydraulic punch, punch frame for use with JOKA punching units type HP-S Hydraulic hole punch, hydraulic press for punching brackets Year of manufacture: approx. 1995 Pressing force: 5 tons Throat depth: 155 mm Stroke: approx. 20 mm Punching unit width: max. 54 mm Punching unit installation height: max. 220 mm Die holder: Ø 48 mm Crsdpfjltrmusx Af Ijh Motor output: 1.5 kW Power supply: 230 Volt, 50 Hz - Suitable for universal use with JOKA SW 20 or SWD 20 punching units - Throat depth of punching units can be larger, can be pushed through to the rear - Stroke release via electric two-hand control - Hydraulic power pack HAWE, type HCW 4 / 2.5-B 1/400-1 - On subframe, mobile Required space (L x W x H): 1100 x 800 x 1450 mm Weight: approx. 200 kg Good condition

Condition: ready for operation (used), Year of construction: 2008, operating hours: 72,918 h, functionality: fully functional, punching force: 22 t, laser power: 2,700 W, sheet thickness (max.): 6 mm, sheet thickness aluminum (max.): 4 mm, sheet thickness steel (max.): 8 mm, TECHNICAL DETAILS Combined punching/laser operation: 2,585 x 1,650 mm Punching mode: 3,085 x 1,740 mm Laser operation: 3,085 x 1,650 mm Outputs Laser power: 140 - 2,700 W Maximum sheet thickness: 8 mm Cutting capacity for mild steel: 8 mm Cutting capacity for aluminum: 4 mm Cutting capacity for stainless steel: 6 mm Maximum punching force: 220 kN Active hold-down device (programmable in stages): 4.5 - 20 kN Cedpfew Suwyjx Af Ierh Maximum workpiece weight: 230 kg Speeds Maximum positioning speed X-axis: 90 m/min Y-axis: 60 m/min Simultaneous (X and Y): 108 m/min C-axis punching: 60 revolutions/min Thread forming: 180 revolutions/min Punching stroke sequence (E = 1): 900 1/min Marking: 2,800 1/min Tools Linear magazine: 18 tools with 3 clamps Tool change time: 1.5 - 5 s Tool accuracy Position deviation: ±0.10 mm Average position spread: ±0.03 mm Programmable slides for punched and laser parts (max.) Size: 500 x 500 mm TRUMPF CNC control: based on Siemens Sinumerik 840D MACHINE DETAILS Laser switch-on time: 72,918 h Cutting time: 18,536 h Space requirement (width x length): 7,900 x 9,100 mm Height: 2,400 mm Weight: 22,500 kg Laser gas consumption CO2 / N2 / He: 1 / 6 / 13 l/h Connected load: 73 kVA

Condition: excellent (used), Year of construction: 2008, Amada EMK 3510NT electric punch, 45 Station Turret with 4 Auto indexing units 2008 Year of manufacture Country of Manufacture: Japan Bridge Type 30 tonnes (196kN) Crodpfow Dc Dysx Af Ijh High speed AC servo direct twin drive 1270 x 2500mm 1270 x 5000mm ( ONE REPOSITION) 34.5 mm mild steel 150Kg max sheet weight mm 58 Stations Turret Turret Stations: 36 x A (Max. Dia. 12.7mm) 12 x B (Max. Dia. 31.7mm) 4 x C (Max. Dia. 50.8mm) 2 x D (Max. Dia. 88.9mm) Auto Indexing Stations 2 x B (Max Dia 31.7mm) 2 x E (Max. Dia. 114.3mm)

Condition: good (used), Year of construction: 2007, functionality: fully functional, laser power: 3,200 W, X working area max.: 3085 mm Y working area max.: 1650 mm Control: Siemens Sinumerik 840 D Laser power: 3200 Watts Operating hours: Power supply 41,117 h Laser ready 37,005 h Laser beam on: 7,365 h Standard equipment: - Hi-Las high-pressure cutting - Laser cutting head with 5'' lens - Laser cutting head with 7.5'' lens - Quick-change device for cutting heads - Programmable cutting gas selection/pressure setting - Capacitive height control (DIAS III) - ContourLas function - Slag cone detection - Compact dust extractor - Tank heater - Automatic tool changer with 17 stations (21 – clamping claws) - 3 clamping claws - Rotation of all tools - NC-controlled, digital, maintenance-free three-phase drives - Automatic repositioning - Tool length compensation - Fast shutoff of hydraulics - Automatic shutdown - Automatic part slides, each 500 x 500 mm - Sensors for both part slides - 2 good-part bins - Scrap slug extraction - Forming capability - Programmable punching tool lubrication - Programmable hold-down device - Adaptive stroke length control - Safety devices - Remote diagnostics unit - RJ 45 network connection - 3.5'' floppy disk drive + Warp detection + Blow-off device for small parts + AutoLas Plus (FocusLine) + Function for deburring and roller technology + Function for thread forming with thread former breakage monitoring + MultiShear function + MultiTool function + Marking/fast beading function Cjdpjw I Rq Iefx Af Isrh + Softpunch function + Low-scratch processing + Repositioning cylinder + Vibration-damped installation + Chip conveyor with tipping container + Additional clamping claw Automation: + Peeling system + GripMaster (3000 x 1500 mm) + SheetMaster (3000 x 1500 mm) + Lift table (300 mm)

Year of construction: 2014, condition: ready for operation (used), Movement Cedpfxsxfmlbj Af Iorh X-Axis Movement 1200 Y-Axis Movement 730 Z-Axis Movement 650 This 3-axis MICROCUT V-30 Challenger was manufactured in 2014. It features a Heidenhain 530 control system and a high spindle speed of 18,000 rpm. The machine offers extensive axis travels with X-Axis at 1,200 mm, Y-Axis at 730 mm, and Z-Axis at 650 mm. With 25,915 machining hours, consider the opportunity to buy this MICROCUT V-30 Challenger turret punch press. Contact us for more information about this machine. Application Types Punching

Year of construction: 1985, condition: used, CNC RASKIN RT75 turret punching machine for sheet metal processing In addition a very extensive punching tool assortment.(see photos) Cedpfx Afjccl N Se Ierh The machine is in good condition and is sold for lack of space. The Lista drawer cabinets are not included in the offer, but can also be purchased for an additional charge. There is also a software available which is not included separately. Travel X 750mm Travel Y 1000mm Stations 16 Machining up to 6mm aluminum Machining up to 6mm steel Machining up to 3mm CNS

Condition: used, Pneumatic toggle press, pneumatic press SCHMIDT Type 34-12 Manufacturer No. 400160-03 Serial No. 0028 Year of manufacture 2008 Pressing force 28 kN = 2.8 tons. Throat 130 mm Ram surface 63 x 36 mm Ram stroke 12 mm Clamping pin bore Ø 20 mm with clamping screw Compressed air requirement 2 to 6 bar - Stroke length continuously adjustable via a fixed stop for the upper stroke end position - Fine adjustment for the lower stroke end position with a scale of 1 graduation = 0.05 mm - Stroke triggered via pneumatic valve, triggered by material insertion - 45° press stand made of special aluminum construction - Press tool made of special construction for 3 x Ø 2.5 mm punch holes - Complete unit mounted on an aluminum base plate 600 x 600 x 20 mm Csdpfx Aev Srfkef Ierh Space required L x W x H 720 x 600 x 600 mm Weight 68 kg Very good condition

Condition: good (used), Year of construction: 2014, functionality: fully functional, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control: IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Coordinate guide for high-precision machining - Stable, easily accessible C-frame - Linear magazine with 21 tool positions and 4 clamps - Drives with maintenance-free three-phase servo motors - Repositioning device with programmable hold-down device - Foot switch for clamp closing - Ball tables - 2 part flaps 500 mm x 500 mm - FocusLine - NitroLine - FastLine - Ejection cylinder for laser parts - Slag cone detection TRUMPF laser - TruDisk 3001 solid-state laser with 1 LLK outlet - Excitation via pump diodes - LLK according to standard layout (10m) - TruControl laser control 1000 - Cooling unit - Laser logbook function Cutting head - Solid-state laser compact cutting unit - ControlLine Punching head - Electro-hydraulic punching head - Rotatable mono tool holder - Tool length compensation - Programmable hold-down device (active / passive / repositioning) - Punch stroke counter and thread stroke counter - Spray lubrication of punch - Punch slug extraction - Calculation of filling level in the punching console - Level monitoring of thread forming and tool lubrication Control - Open control based on Rexroth IndraMotion MTX - Control panel with 17" touch control panel - Program management - Production plan - Integrated technology data - Teleservice via Internet - Programmable cutting gas pressure - Automatic switch-off with wake-up mode Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Two-beam light barriers - Monitoring system for, among others Gas pressure, temperature, cooling water - Quick shutdown hydraulics - Protection against scattered radiation - Compact dust extraction system - MultiTool function - MultiBend function - Thread forming function - Engraving function - Deburring and rolling technology function - SoftPunch function - StripLine - Lowerable die - Spray lubrication die including level monitoring - Additional clamping claw - 4 pcs. Height-adjustable clamping claws - Vibration-damped installation - Chip conveyor with tilting container - Blow-out device for small parts - Warping detection SheetMaster - Unloading platform - Suction frame with 36 suction cups - Peeling suction cup - Vacuum sensors for each suction cup - Double sheet detector for double sheet control - Central lubrication - TRUMPF control based on Rexroth IndraMotion MTX - Automatic clamp closing machine - Loading and unloading parallel to production time - Peeling system including positioning aid medium format (2500x1250) - First additional suction cup package standard - Second additional suction cup package standard - Unloading monitoring laser parts GripMaster Cjdpfx Afowld Sue Isrh - Parts conveyor belt punching station - Parts conveyor belt laser station ToolMaster with 70 stations (only for punching operation) - ToolMaster set-up parallel to production time

Year of construction: 2016, condition: ready for operation (used), General Data Measurements width 6212 mm Measurements depth 5436 mm Measurements height 2342 mm Machine weight 21500 kg Main Drive Number of axis 4 Movement X-Axis Movement 3050 mm Y-Axis Movement 1525 mm Z-Axis Movement 37 mm Turret Number of turrets 1 Additional Equipment Cjdpfx Aoxaqmrjf Ijrh Air-blow oil-mist lubrication Slug-vacuum system Digital tool ID / barcode system Integrated tapping: inch/metric taps (M2.5–M8) Marking & deburring tools: on-board marking and deburring options This 4-axis AMADA EMZ3612M2 was manufactured in 2016, featuring a high-speed servo-electric turret punch press with twin AC servo direct drive. It boasts a 33-ton press capacity and an AMNC-F / AMNC-4ie CNC system for enhanced control. The machine handles sheet formats up to 3050x1525 mm and includes a "King" turret with up to 58 stations. Energy efficiency is optimized with AC servo drives. If you are looking to get high-quality punching capabilities consider the AMADA EMZ3612M2 machine we have for sale. Contact us for more information. Application Types Punching

Year of construction: 2004, operating hours: 26,508 h, condition: ready for operation (used), General Data Machine weight 18000 kg Tools Number of index 45 Additional Equipment Sold with all tools (list of tools attached) This AMADA EM2510NT was manufactured in 2004. A robust turret punch press, it comes with a 20-ton punching power and can handle sheet sizes up to 5000 x 1270mm. It supports a maximum sheet thickness of 3.2mm and a punching diameter of 114.3mm. Includes 45 tools for diverse punching needs. Ideal for those looking to enhance their punching capabilities. Contact us for more information about this machine. Application Types Credpfxsw U E Rcj Af Ioh Punching

Year of construction: 2019, condition: ready for operation (used), General Data Measurements width 7360 Measurements depth 6750 Measurements height 2310 Machine weight 12960 Control Unit Brand SIEMENS Model Sinnumeric 840 Movement X-Axis Movement 2500 + R mm X-Axis Rapid Traverse 100 m/min Y-Axis Movement 1250 mm Y-Axis Rapid Traverse 75 m/min Max Material Thickness Codpfxew Ualzo Af Iorh Steel 6 mm Stainless steel 3 mm This Durma TPL93 turret punch press was manufactured in 2019. It's a robust choice for precision punching operations. Consider the opportunity to buy this Durma TPL93 turret punch press. Contact us for more information. Application Types Punching

Year of construction: 2010, condition: ready for operation (used), General Data Machine weight 21000 Control Unit Brand FANUC Model n/a Cedpsw N Tnrsfx Af Iorh Main Drive Number of axis 3 Turret Number of turrets 45 Additional Equipment Power Required: 27 kVA Noise Level: 91 dB (A) This 3-axis AMADA EMZ 3510 NT was manufactured in 2010. It features a punching capacity of 300 kN and includes 45 turret stations. With a power requirement of 27 kVA and a weight of 21000 kg, this CNC punch press is robust and efficient. If you are looking to get high-quality punching capabilities, consider the AMADA EMZ 3510 NT machine we have for sale. Contact us for more information about this machine. Application Types Punching

Condition: ready for operation (used), Year of construction: 2003, operating hours: 24,628 h, General Data Machine weight 17500 kg Control Unit Model WIN NT Brand TRUMPF Main Drive Punching force 220 kN Movement X-Axis Movement 3125 mm Y-Axis Movement 1650 mm This Trumpf Trumatic 5000 R Punching machine was made in 2003 and has 24628 production hours. It is equipped with a Trumpf WIN NT control unit. The machine has a punching force of 220 kN. Application Types Punching Crjdpfjw Nb D Uox Af Ish