Used Push Broach for sale (1,354)

Condition: good (used), Square broaching tool, multi-wedge broach, broaching tool, broaching needle, grooving tool, keyway broaching tool, keyway broaching needle -Manufacturer: HS Hasseay Savage, broach push broach -Type: 11620 J9 HSS M-2 -Keyway width: 20 mm -Quantity: 1 piece available Cjdpfewt N E Aex Aiieri -Dimensions box: 495/50/H50 mm -Weight: 2.8 kg

Condition: excellent (used), Broaching tool, broaching needle, special tool, grooving tool, keyseating machine, keyway broaching machine, keyway broaching machine, keyway broaching tool, broaching needle -Manufacturer: SWZ, broach push broach -Type: B 6 J9x1.8 RL 24-72mm -Item no.: 45 0014 -Width: 6mm -Number: 1x broach available -Price per piece -Total dimensions: 900/6/H13 mm Cjdpfx Aioitt Ryeieri -Weight: 0.5 kg/pc.

Condition: good (used), Square broaching tool, multi-wedge broach, broaching tool, broaching needle, grooving tool, keyway broaching tool, keyway broaching needle -Manufacturer: HS Hasseay Savage, broach push broach -Type: 11518 18MM V Codpowt N Hyjfx Aiijri -Keyway width: 18 mm -Quantity: 1 piece available -Dimensions box: 395/40/H40 mm -Weight: 1.3 kg

Condition: good (used), Square broaching tool, multi-wedge broach, broaching tool, broaching needle, grooving tool, keyway broaching tool, keyway broaching needle Codpswt N H Tjfx Aiijri -Manufacturer: HS Hasseay Savage, broach push broach -Type: 11622 J9 HSS M-2 -Keyway width: 22 mm -Quantity: 1 piece available -Dimensions box: 495/50/H50 mm -Weight: 2.8 kg

Condition: good (used), Square broaching tool, multi-slot broaching needle, broaching tool, broaching needle, slotting tool, slotting tool, push broaching needle, keyway push broaching needle -Manufacturer: Forestry, clearing needle, push clearing needle -Quantity: 2 pieces still available -Keyway width: 10 mm -Type: see photos -Submission/Price: complete -Transport dimensions: 1085/33/H32 mm -Weight: 4.5 kg Credpszlgb Nefx Aiisi

Condition: good (used), overall weight: 10,364 kg, Year of construction: 2019, 2019 GENERAL BROACH 10-30 GBTU VERTICAL TABLE UP BROACH Equipped with: Retriever Shuttle Table Chip Conveyor Auto Load Grayco Lube Crsdpfx Aisrtrzaeiji AB Panelview Coolant Tank & Pump Specifications: Capacity: 10 Ton Stroke: 30" Table Up 1″ Puller / Retriever Hydraulic Power Unit Chip Conveyor Machine Dimensions (approx.): 165″ x 48″ x 60″ Machine Weight Total (approx.): 22,800 lbs. Machine Column (approx.) : 13,000 lbs. Base w/ Chip Conveyor (approx.): 4,700 lbs. Electrical Panel (approx.): 600 lbs. Hydraulic Power Unit (approx.): 4,500 lbs.

Condition: used, Broaching tool, broaching needle, special tool, grooving tool, keyseating machine, keyway broaching machine, keyway broaching machine, keyway broaching tool, broaching needle -Manufacturer: Planeta Coswig, broach push broach -Type: 16D11x2.7 34-120inSt 34-165inGG - Width: 16mm Cedoitt Sajpfx Aiisri -Number: 1x available -Total dimensions: 1250/16/H30 mm -Weight: 4.2kg

Condition: good (used), functionality: fully functional, Year of construction: 1970, overall weight: 2,500 kg, broaching length: 300 mm, total length: 2,000 mm, total width: 2,000 mm, GSP M743 mortising machine Travel: 0 to 300 Crsdpfx Aez Ingveiioi Stroke: 3 to 52 Weight: 2.5 tons Rapid traverses on both axes Rapid traverse on table rotation, diameter 700 In very good condition

Condition: used, functionality: fully functional, Year of construction: 1980, Rausch RS8/1300 Snowplow - Vertical Csdpfj Ah Hpmox Aiiori - Year of manufacture: 1980 - Tractive force: 8 t - Stroke: 1300 mm - Weight: 1380 kg - Incl. snowplow blades

Condition: used, Year of construction: 2017, 1 Cleaning machine HS200/1600-3, manufacturer: Stenhoj / HESO, year of manufacture: 2017 / 2015, mains connection: 400V, 50Hz, nominal pressure: 4 bar, dimensions (L x W x H): 4.284m x 6.62m x 3.85m / 4.3m x 1.8m x 2m, weight: 1.6t, Stenhoj: electromechanical cleaning machine with lifting table, 200kN at 6m/min including workpiece holder, HESO: used for washing, rinsing and drying workpieces using aqueous solutions, pumps, manufacturer: Ebara, blowers, manufacturer: Becker, operating hours of the individual units: 15,000 / -, average utilization: 85%, last documented maintenance: 04/26/2024, system generally operational, follow-up work has been carried out. Code Aa Acpspfx Aiisri

Year of construction: 1968, condition: used, functionality: fully functional, machine/vehicle number: 2276, Karl Klink HW 20 Reaming Machine For sale is a functional Karl Klink HW 20 reaming machine. This machine comes from the renowned Karl Klink tool machine factory and was used in industrial applications until recently. It is suitable for precise reaming operations in single-part and series production. Technical Data Manufacturer: Karl Klink Tool Machine Factory Csdpfezvf Trex Aiiori Model: HW 20 Machine Type: Reaming Machine Year of Manufacture: 1968 Weight: approx. 5,500 kg Connected Load: approx. 19 kVA Condition Fully functional Used Inspection possible by appointment Sale due to changes in equipment Delivery FCA location Dismantling and transport by the buyer Overhead crane and forklift can be made available for loading upon agreement.

Condition: like new (used), functionality: fully functional, Year of construction: 2020, operating hours: 50 h, overall weight: 640 kg, input voltage: 400 V, input frequency: 50 Hz, workpiece diameter (max.): 400 mm, de machine is in nieuwstaat. neem contact op voor meer info. Credpozugnhjfx Aiioi

Condition: refurbished (used), functionality: fully functional, Year of construction: 2024, broaching length: 1,000 mm, number of broaching positions: 1, broaching speed: 3 m/min, Manufacturer: Rausch (Haan/Rhld) Model: RS 6/1000 Machine No.: 51261 Year of Manufacture: 1978 Weight: 680 kg Overhauled: 11/2024 by Wiemers AG General Information / Technical Data: Overhauled mechanical vertical broaching machine Rausch RS 6 G Pulling force: 60 kN Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1000 mm Maximum tool length: 1200 mm Table dimensions / Working area: 610 x 470 mm / 520 x 320 mm Table aperture: Ø90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (H x W x D): 2,250 mm x 850 mm x 1,200 mm (H = table height from floor, without attachments) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Additional modifications/upgrades to the original machine performed: - External stroke adjustment - New, machine-independent, reproducible tool length adjustment system - Additional limit switches for end position monitoring - Safety door with monitoring (integrated in the emergency circuit) - Machine enclosure below safety door with chip protection and tool storage area - Electrical sensing of clamping jaws (tool removal monitoring to prevent unintended retraction of the broaching bridge) - Coolant swing system with solenoid valve operated during swing motion (for switching on coolant before broaching stroke – optical flow control ensures lubrication, no dry cutting!) - Routing of electrical cables in protective steel conduits - Heavy-duty control cabinet mounting for machine components - Additional oil-proof drip tray on the control cabinet - Three-sided closed splash guard cabin (W = 960 x D = 450 x H = 590 mm) - Reinforced chip screen with magnetic separator - Control panel made of stainless steel with durable labeling - 4 central lubrication points for trapezoidal spindle drive Remarks: The machine has been completely overhauled, the machine body fully refurbished. All wear parts have been replaced. - New trapezoidal spindles and spindle nuts made from cast wear-resistant bronze - All bearings and seals renewed - The coolant system (pump, solenoid valve, and drain tap), including the coolant/lubrication swing system, is new - The clamping jaws are new - Complete electrical system (control cabinet) is new - All sheet metal and enclosures are new - The following components have been overhauled and re-used: - Machine base - Machine column - Machine table with table insert - Broaching bridge (clamping jaws new) - Gear wheels - Electric motor (new brake, new bearings) The machine is stored in our warehouse and can be inspected under power. The attached images are original photos of the machine. The machine is CE marked. The CE marking corresponds to the status as of 1998 (first overhaul). Cjdpjw Ighijfx Aiijri

Condition: used, functionality: fully functional, Year of construction: 2019, machine/vehicle number: 53, overall weight: 38,500 kg, input voltage: 400 V, input current: 355 A, input frequency: 50 Hz, broaching speed: 12 m/min, workpiece diameter (max.): 225 mm, total length: 7,100 mm, total width: 11,560 mm, total height: 6,000 mm, Forst RISH 60 x 2125 x 630 – Vertical internal broaching machine Used Forst broaching machine for internal broaching of ring gear workpieces. The machine features a lifting table and a servo-electric broaching drive; the broach pitch is set via the NC program. Machining is performed individually or in pairs, depending on the workpiece. Identification Manufacturer: Forst Technologie GmbH & Co. KG Type: RISH 60 x 2125 x 630 Factory number: 53 Forst order number: M233202 Reference / Inventory number: 351024 Year of manufacture: 2019 (according to machine data sheet) Crsdpfjz Hq Aksx Aiiji Technical data according to machine documentation - Maximum tensile force: 600 kN - Maximum stroke: 2,125 mm - Maximum cutting speed: 12 m/min - Return stroke speed: 20 m/min - Maximum workpiece diameter: 225 mm - Maximum workpiece height: 50 mm - Maximum tool diameter: 200 mm - Tool shank diameter: 80 mm - Tool tip diameter: 75 mm - Overall dimensions (L x W x H): approx. 7,100 x 11,560 x 6,000 mm - Total weight of the machine: approx. 38,500 kg - Weight of the base machine: approx. 34,500 kg - Electrical connection: 400 V, 3 phases, 50 Hz - Rated current according to nameplate: 355 A Documented features - Siemens SINUMERIK 840D sl / S7-300 - Operator panel OP012 and hand-held operating unit HT8 - SKF roller screw drive and linear guides - Hydraulic workpiece clamping - Coolant system with high/low pressure supply and 1,800-liter tank - Chip conveyor and chip centrifuge - Oil mist separator and central lubrication system Operating manual and technical documentation are available. The data and features listed describe the documented machine condition. The actual scope of supply should be agreed upon before finalization. The suitability for other workpieces requires a technical assessment and, if necessary, adapted tools and fixtures. Used machine, operated without malfunctions until disassembly. Price on request.

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: serie nr 3149, overall weight: 11,800 kg, total width: 6,615 mm, total length: 8,890 mm, total height: 2,050 mm, spindle diameter: 50 mm, type of input current: three-phase, space requirement length: 16,000 mm, space requirement width: 8,000 mm, milling spindle length: 650 mm, compressed air connection: 8 bar, spindle speed (min.): 3,500 rpm, spindle speed (max.): 3,500 rpm, length stop: 3,450 mm, input voltage: 125 V, power: 65 kW (88.38 HP), main saw diameter: 450 mm, corner unit for window and door frames, including tools. controlled from the office (Groeneveld). interpolation (angled pins). barcode laser. return transport. documentation available. complete sets of spare blades/saws, including router bits, linked to Groeneveld. automatic counter-piece. maximum workpiece length 6000. sticker printer for barcode. automatic waxelite pump. automatic central lubrication. connections for pin holes and counter-molds. automatic length stop and rotation for workpieces. including extraction pipes with automatic valve. thicknesses from 38 to 150 mm. pin bank: 1x saw blade 40mm. 2x pin shaft 50x650. 2x edge breaker 30x40. router: 1x rounding router 30x40. 3x router bits 50x600. machine can be picked up here; in conjunction with Bos Machines (dismantling and transport not included in the price). price excludes VAT. Cedpfx Aisztptqsijri

Condition: good (used), Year of construction: 2004, machine/vehicle number: 3234, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. Crodpezluyajfx Aiisi For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 250 mm, stroke length: 250 mm, throat depth: 365 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 560 mm Y-axis travel: 450 mm Z-axis travel: 250 mm Stroke: max. 250 mm Overhang: max. 365 mm Table diameter: 500 mm Table length: 500 mm Table width: 500 mm Table depth: 500 mm MACHINE DETAILS Control system: Conventional Model: Vertical Number of axes: 3 Power: 5.5 kW Crodpfx Aie Af Hdboisi Dimensions & Weight Dimensions (L x W x H): 2,000 x 1,600 x 2,350 mm Net weight: 3,000 kg Number of transport packages: 1

Condition: ready for operation (used), Year of construction: 1998, overall weight: 2,900 kg, power: 8 kW (10.88 HP), input voltage: 380 V, number of broaching positions: 1, total width: 6,100 mm, total height: 1,900 mm, Manufacturer: Karl Klink Model: RW 10 Year of manufacture: 1959 / 1998 Weight: 2,900 kg Machine No.: 1194 General Information / Technical Data: Hydraulic internal broaching machine in operational condition Broaching stroke: 1,420 mm Tensile force: 10,000 kg Diameter of drawhead mount in the draw bridge: 85 mm Broaching tool clamping: universal drawhead for flat shanks up to 25 mm width Through-hole in the clamping table: Ø 100 mm Workpiece diameter: max. approx. 360 mm (limited by the machine body of the tool feeder) Cutting speed: hydraulically infinitely variable from 1 m/min to 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to 25 m/min Machine dimensions (W x D x H): approx. 4,100 (6,100) mm x 800 mm x 1,900 mm (excluding work area) Power supply / connected load: 380 Volt 50 Hz / 8.0 kW Accessories / Special Features: • The machine is equipped with manual-hydraulic control for the broaching stroke movement • The machine has an integrated coolant/lubricant system • The machine features a basic oil drip tray fitted to the machine bed, without tool feeder Codpfjxtcz Iex Aiieri Remarks: The machine is ideal for the production of keyways and profiles. Broaching needles, arbors, and drawheads can be supplied on request.

Condition: good (used), functionality: fully functional, Year of construction: 1992, Vertical snowplow with 10 snowplow blades and numerous mounting points. Drive system with a Stöber gearbox, providing infinitely variable speed control. Crodpfx As Agn U Aoiioi

Condition: used, Manufacturer: Konkoly Electro Kft., Hungary Year of manufacture: 2020 Year of installation: 2020.12 Rated voltage: 400 V Maximum current consumption: 40 A Frequency: 50 Hz Crsdpfx Aiszumw Noiei Required pressure: 6 bar Total weight: 5500 kg Noise level: < 95 dB Hydraulic pressure: Cycle time: approx. 30 sec. Changeover time: approx. 10-30 min., depending on the required tooling.

Condition: used, Drawing machine / stretching machine KARL KLINK RSI 2.5 EH Codpezwdrvjfx Aiieri -Pulling force 2500 kg -Stretching speed 1 mm to 9 mm/min (infinitely variable) -Stroke length 800 mm -Max. workpiece diameter approx. 250 mm -Motor power approx. 3 kW -Coolant system -Pulling force indicator -Pulling force limitation -Various guide bushings (see pictures) -Machine feet Dimensions: L x W x H 1.1 x 0.7 x 2 meters / Weight 1600 kg Errors and omissions excepted.

Year of construction: 1981, condition: good (used), Manufacturer: National Broach Csdpfjhad Avsx Aiisri Type: GHC 12" Year of manufacture: 1981 workpieceØ max.: 355mm pitch circleØ min/max: 100-152mm tooth width max.: 63,5mm Modu min/max.: 1,25-6,35mm weight: 3,4t Operation: honing internal teeth

Condition: ready for operation (used), functionality: fully functional, "Urpe M-300 G mortising machine with an inclinable head, featuring a 0-300mm stroke, with a stroke rate of 30-35-40 strokes per minute. The distance from the tool to the column is 500mm, and the adjustable distance from the table to the ram is 425-585mm. The maximum distance between the tool and the body is 450mm. The table surface is 800x325mm, with a longitudinal travel of 550mm and a transverse travel of 265mm. The motor has a power of 5.5 hp, and the estimated weight is 1850 kg. It includes a manual indexing head and is in good condition." Cjdpfjz Tc Iaox Aiiori

Condition: used, Footprint: approx. 6000 x 7000 x 6850 mm Includes broach(es); not all are present. Rated force: 25 tons Cjdpfxezz Hl To Aiisri Peak force: 37 tons Stroke: 66" / approx. 1,676 mm Cutting speed: 0–33 ft/min Return speed: 0–60 ft/min Equipment: retraction unit Table: sliding table, 3 stations

Condition: ready for operation (used), functionality: fully functional, Hoyton GH-500 slotting and mortising machine, maximum slot length 500mm, maximum slot width 50mm, cutting speed 7.5 mpm, return speed 15 mpm, 3 hp. The machine is in good condition and includes a cabinet or workbench filled with accessories. This workbench is 2 meters long x 1 meter wide x 93 cm high and has a vise and a dividing head. Cedpfx Ajzmp H Roiijri