Used Push Broach for sale (1,354)

Year of construction: 1980, condition: good (used), machine/vehicle number: 03.2123, Manufacturer: Arthur Klink Model: RISZ 25x 2500 x 500 Year of manufacture: 1980 Machine No.: 03.2123 General / technical data: used vertical hydraulic indoor rasping machine with 3 rasping points in a very good condition tractive force: 25000 KG Lodpfedffzfsx Ahvjri clearing length: 2000mm wheel positions: 3 pieces Distance between the wheels: 160mm diameter of the drawing heads: 3 x Ø 100mm Clearance width between the cylinders: Nominal size 500mm passage width between the cylinders measured: max. 590mm Cutting speed: hydraulically infinitely variable from 1m/min to max. 10m/min Return speed: hydraulically infinitely variable from 5 to max. 25m/min Space requirement of the machine: (w x d x h) approx. 3400mm x 3400mm x 6900 mm (without pit) Power supply / connected load: 380Volt 50 HZ / 22 KW Accessories / special equipment: The machine is currently without work table. On the machine was a workpiece sliding table mounted with a special workpiece clamping device for external broaching. (The workpiece sliding table is changeable). The tool clamping system is equipped with a hydraulic lock in the draw bridge as well as in the feeder. The machine has a coolant system with integrated chip conveyor. Remarks: The machine is in very good condition and is still in its original paint. It is designed for serial production, for optimal use a foundation (pit) is ideally needed. Drawing heads and needles

Year of construction: 1962, condition: used, machine/vehicle number: 1790, creator: Karl Klink Model: RW 5 year of construction: 1962 weight: ca. 2500 KG machine. No.:1790 General / technical data: hydraulic horizontal internal broaching machine in a good working condition clearing stroke: 1320mm turning: 1 piece pulling force: 5000 KG at 3m/min (3000KG at 7m/min) Clamping tool: universal drawing head for flat shafts Through hole in clamping table: Ø 100mm Workpiece diameter: max. 420mm (due to the oil and spit trough) cutting speed: hydraulically infinitely variable from 1m/min to 7m/min Return speed: hydraulically infinitely variable from 7m/min to 25m/min Dimensions of the machine: (w x d x h) approx. 4600mm x 600mm x 1900mm (without working area) Power supply: 380Volt / 50 HZ / 15A hydraulic motor: 4 KW Accessories / special equipment: - the machine is equipped with a universal pulling head for flat shafts - Coolant / lubricant system - without tool feeder - short oil and oil sump (approx. 900mm) Lrsdpfx Aedl Uzkehvsi Remarks: The machine is ideal for the production of keyways. On request broaches and mandrels can be supplied. The machine is ready to run under power in our warehouse.

Year of construction: 1965, condition: used, machine/vehicle number: 2112, Color: green Force: 2,5 to Stroke: 1000mm Weight: 1,2 to 3 KW Lrjdebrclvopfx Ahvji Area required: appr. 140 x 130 cm

Condition: used, DIMENSIONS: HEIGHT 100 mm WIDTH 270 mm ELECTRONIC PUSHER LENGTH 6100 mm SAW BLADE MOTOR 4 kW Lsdsw E Eudspfx Ahvsri

Year of construction: 1960, condition: refurbished (used), machine/vehicle number: 1732, Vertical internal broaching machine with switching plate of the company Karl Klink Type: RSI6DT Machine No.: 1732 Year of manufacture: 1960 weight: 3,2 to broaching force: 6.000kg Ljdpfx Aegyd Svshvsri With switch plate ( 2 stations ) Power supply: 380V / 50Hz Rated current: 15 A Connected load: 4kW The machine is completely revised and is therefore in a very good condition.

Year of construction: 1964, condition: refurbished (used), machine/vehicle number: 2041, Vertical internal broaching machine with switching plate of the company Karl Klink Type: RSI8DT1 Machine No.: 2041 Ledpfegyd S Dex Ahveri Year of manufacture: 1964 weight: 3,2 to broaching force: 8.000kg With switch plate ( 2 stations ) Power supply: 380V / 50Hz Rated current: 25 A Connected load: 5,5 kW The machine is completely revised and is therefore in a very good condition.

Year of construction: 1962, condition: good (used), machine/vehicle number: 1886, Used vertical hydraulic internal broaching machine with 3 broaching points Lrsdpfx Ahet Dwb Dsvji Tractive force: 10.000 kg clearing length: 1.200 mm Broaching points: 3 pieces Distance between the broaching points: 380 mm Mounting diameter of the broaching heads 3 x Ø ___mm Passage width between the cylinders: max. XXX mm Cutting speed: hydraulically infinitely variable from 1 m/min to max. 7 m/min Return speed: hydraulically infinitely variable from 7 to max. 25 m/min Space requirement of the machine: (w x d x h) approx. 1,300 x 1,450 x 3,350 mm (without pit) Power supply / connected load: 380Volt 50 HZ / 8.0 KW Accessories / special equipment: The machine is equipped with a workpiece table with 3 holes for 3 broaching positions. The tool clamping system is provided for spring-mechanical locking in the drawbridge and in the feeder. The machine has an integrated coolant system. Remarks: The machine is designed for use in series production, ideally a foundation (pit) or optionally a platform is required for optimum use. Drawing heads and needle lifters are available on request. The machine can be viewed in our warehouse.

Condition: new, Year of construction: 2025, TRSI Automatic Saw: Power, Precision, and Optimization TRSI Ø600 Push-Feed Saw – 90° Cut: Perfect for Beech Sawing The TRSI Ø600 is an automatic optimizer push-feed saw, designed for cutting beech planks with constant thickness and variable width. Its modular monoblock structure and Ø600 blade make it ideal for high-precision operations. Key Features: Programmed and Optimized Cutting: Precise and repetitive operations, or optimization to reduce waste and maximize material yield. TRSI Ø700 Push-Feed Saw – 90° Cut: Beam and Packaging Cutting The TRSI Ø700 is designed for high-performance cutting of beams and packaging. With a Ø700 blade and a robust structure, it provides high productivity in both sawmills and packaging industries. Key Features: Programmed and Optimized Cutting: Maximizing material usage while minimizing waste. TRSI: The Customizable Solution for Every Sector The TRSI is the ideal automatic saw for companies seeking speed, reliability, and precision. Customizable to your needs, it fits perfectly into various production sectors. Advanced Technology: Advanced Software: Easy programming and process optimization. Full Integration: Compatible with your business systems. Remote Assistance: Technical support always available. Superior Performance: Ultra-Precise Movement: Rapid push-feed on ball screw guide for smooth and accurate cuts. Brushless Motors: High performance and reliability. Reinforced Structure: Guarantees smooth operation without vibrations. Accessories for Maximum Productivity: Customized Loaders: Reducing downtime. Manual and Automatic Printers: Clear marking of semi-finished products. Lodjv Iqddjpfx Ahvjri Optimized Discharge Systems: For all types of processing. Trust Cursal for Innovation and Performance With the TRSI, you can achieve maximum efficiency and precision, customizing every aspect of the machine to optimize production flow. Contact us for a tailored consultation and take your production to new levels of quality.

Condition: refurbished (used), functionality: fully functional, Year of construction: 2024, broaching length: 1,000 mm, number of broaching positions: 1, broaching speed: 3 m/min, Manufacturer: Rausch (Haan/Rhld) Model: RS 6/1000 Machine No.: 51261 Year of Manufacture: 1978 Weight: 680 kg Overhauled: 11/2024 by Wiemers AG General Information / Technical Data: Overhauled mechanical vertical broaching machine Rausch RS 6 G Pulling force: 60 kN Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1000 mm Maximum tool length: 1200 mm Table dimensions / Working area: 610 x 470 mm / 520 x 320 mm Table aperture: Ø90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (H x W x D): 2,250 mm x 850 mm x 1,200 mm (H = table height from floor, without attachments) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Additional modifications/upgrades to the original machine performed: - External stroke adjustment - New, machine-independent, reproducible tool length adjustment system - Additional limit switches for end position monitoring - Safety door with monitoring (integrated in the emergency circuit) - Machine enclosure below safety door with chip protection and tool storage area - Electrical sensing of clamping jaws (tool removal monitoring to prevent unintended retraction of the broaching bridge) - Coolant swing system with solenoid valve operated during swing motion (for switching on coolant before broaching stroke – optical flow control ensures lubrication, no dry cutting!) - Routing of electrical cables in protective steel conduits - Heavy-duty control cabinet mounting for machine components - Additional oil-proof drip tray on the control cabinet - Three-sided closed splash guard cabin (W = 960 x D = 450 x H = 590 mm) - Reinforced chip screen with magnetic separator - Control panel made of stainless steel with durable labeling - 4 central lubrication points for trapezoidal spindle drive Remarks: The machine has been completely overhauled, the machine body fully refurbished. All wear parts have been replaced. - New trapezoidal spindles and spindle nuts made from cast wear-resistant bronze - All bearings and seals renewed - The coolant system (pump, solenoid valve, and drain tap), including the coolant/lubrication swing system, is new - The clamping jaws are new - Complete electrical system (control cabinet) is new - All sheet metal and enclosures are new - The following components have been overhauled and re-used: - Machine base - Machine column - Machine table with table insert - Broaching bridge (clamping jaws new) - Gear wheels - Electric motor (new brake, new bearings) Lredpfew Ighijx Ahvoi The machine is stored in our warehouse and can be inspected under power. The attached images are original photos of the machine. The machine is CE marked. The CE marking corresponds to the status as of 1998 (first overhaul).

Condition: new, Year of construction: 2025, Semi-automatic optimising crosscut saw with electronic positioner with push-stop mode COSTCUTTING OPTIMIZING SAW Superpush 150 is the centre for the cutting and entry level optimisation. It is designed as the true technological evolution of traditional cutting methods, able to increase productivity and improve wood yield. EXTREMELY ROBUST Very robust and reinforced steel structure. Horizontal plane with mobile protection to favour the loading of the work piece. Carriage with custom-made stop function and pusher. Ljdpfxeg Hzvge Ahveri Linear unit composed by toothed belt with steel cables inside and sliding guide with linear bearings. Horizontal and continuous piece deposit plane with width mm. 300. TECHNOLOGICALLY INNOVATIVE Electronic system composed by a touch screen panel with integrated NC. Software running on Linux with customized interface. Colour display 15,6”, resistant TOUCH SCREEN for a complete safety in industrial environments. Programs import via USB Possibility of Tele-service through internet. + Macro Excel. FAST Software S4U Lite Brushless positioner motor with digital servo-driver. Quick selection interface Stop/Pusher Adjustable cutting speed. RELIABLE AND SAFE Movements with sliding bearing with double anti-dust protection. Electric box separated from the machine and self-standing. Independent pneumatic regulations to adapt to different types of working. Two-handed safety manual control. Machine certified "CE" by the Certifying Agency, not self-certified.

Year of construction: 1991, condition: good (used), machine/vehicle number: nn, Broaching Machine – Vertical Lredpfx Asfc T Ewehvoi Manufacturer: Locher Model: RWIL 10 x 1250 Year of manufacturing: 1991 Force: 10 Tons Stroke: 1.250 mm Area required: approx. 170 x 150 cm With automatic lead Magnetic chip-conveyor

Year of construction: 1991, condition: ready for operation (used), y 018 Broaching Machine – Vertical Manufacturer: Hönnema Typ: HSR 9/1250 RST Machine number: 166/HM 510275 Year of manufacturing: 1991 Force: 9 Tons Stroke: 1.250 mm Lodpfshf A I Njx Ahvsri Area required: approx. 230 x 120 cm With automatic feed External broaching possible with device

Condition: used, Year of construction: 1979, functionality: fully functional, machine/vehicle number: 17065, Manufacturer: henning Model: U6/1000 Machine no.: 17065 Year of construction: 1979 Weight: 1.100 kg General / technical data: used mechanical vertical broaching machine Henning, in working condition Tractive force: 6,000kg (60KN) Clearing speeds: 3m/min and 6m/min Return speed: 6m/min maximum stroke: 1,000mm maximum tool length: 1,200mm table size / work surface: 600x460mm / 480 x340mm Table aperture: Ø 170mm with eccentric table insert with Ø 90mm bore for standard broaching mandrels (Rausch system) Workpiece diameter: any Dimensions (h x w x d): 1,650mm x 1,200mm x 700mm (h= table height to floor without superstructure) Lsdpsup Uzfsfx Ahvsri Motor: 7.4 /10kw Power supply: 380 Volt / 50 HZ Accessories / special equipment: - Integrated coolant system - Return circuit with double actuation mode - Machine documentation - Automatic clamping jaw opener in the lower drawbridge position (tool removal) - Tool clamping with universal clamping jaws for flat shanks DIN 1416 BL 6 Remark: The machine is in original condition, the function has been tested. The machine is mechanically driven by a trapezoidal threaded spindle and a geared motor. In contrast to most mechanically driven broaching machines in which the trapezoidal spindle forms the drive and guide element, this machine has additional guide columns. The machine is therefore additionally column-guided and very stable. The double spindle drive is ideal for a continuously constant cutting speed, even with higher tensile forces. The machine is in our warehouse and can be inspected under power.

Year of construction: 1987, condition: used, machine/vehicle number: 34, gr. tractive force: 10 to gr. stroke 1000 mm cutting speed: 7,5 m/min return speed: 24 m/min weight: 6,2 to Lrjdpfxjnd Dms Ahvoi Machine is suitable for tube clearing

Year of construction: 1971, condition: used, machine/vehicle number: 51, Color: yellow Force: 6,3 to Lrsdpfx Asbrclzshvji Stroke: 1000 mm Weight: 3.300kg

Condition: new, Year of construction: 2019, machine/vehicle number: 3813, overall weight: 600 kg, power: 7 kW (9.52 HP), input voltage: 400 V, input frequency: 50 Hz, broaching length: 1,000 mm, workpiece diameter (max.): 300 mm, Designation: Vertical Broaching Machine Manufacturer: Rausch GmbH & Co. KG Model: RS 30/1000 Machine No.: 3813 Year of manufacture: 2019 Never commissioned Complete documentation Without broaching tools (broaches) Working Area Max. stroke: 1000 mm Max. pulling force: 30 kN Min./max. cutting speed: 1.0 – 7.5 m/min Min./max. return speed: 1.0 – 7.5 m/min Internal Broaching: Tool feed: manual/automatic Max. workpiece diameter: 300 mm External Broaching: Fixed/movable/rotatable workpiece clamping plate Clamping plate area: 255 mm x 400 mm T-slots: 2 units, 14 mm wide, parallel/perpendicular to the mounting surface of the tool slide Accessories/Special Equipment: Coolant system Broaching tool safety device Machine cover for workspace protection Footprint: 0.72 m x 1.3 m x 2.67 m (LxWxH) Weight: 600 kg Voltage: 400 V Current type: Three-phase Y/Δ 50 Hz Connected load: 12 kVA Max. fuse: 25 A Motor: Main drive: 7 kW / 2000 rpm Coolant pump: 0.12 kW / 2700 rpm Broaching Tool Holder: Clamping jaws for flat and profile tools up to 18 mm shank width Coolant supply: ½" Ljdjw Evkiepfx Ahveri Please submit inquiries only via email. All information is provided to the best of our knowledge. Subject to errors. This offer is directed exclusively at businesses as defined by § 14 BGB. Sale is made without any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of the seller's obligations or for any injury to life, limb, or health. For further information, please visit the website of Witzenmann GmbH under the headings "Imprint", "General Terms and Conditions", and "Data Protection".

Year of construction: 1984, condition: used, machine/vehicle number: 16700, Color: White With magnetic chip-conveyor Automatic lead Force: 10 to Stroke: 1200mm Weight: 6 to Area required: appr. 160 x 140 cm Lredpfobrclqox Ahvji

Year of construction: 1983, condition: excellent (used), machine/vehicle number: 03.2133, Arthur Klink - internal broaching machine (KOM 138) machine type: internal vertical hydraulic broaching machine manufacturer: Arthur Klink type: RISZ 16 x1250 x400 built in: 1983 Lsdpfsd Nb A Nsx Ahvsri stroke: 1250mm pulling force: 16.000KG working stations: 3 PCs drive: hydraulic system equipment: coolant system, magnetic chip conveyer remark: in an excellent condition, ready to use, perfect slides Optional accessories available on request: pulling head, pick up tool holder Information about us: we are specialized for second hand broaching machine and still have anytime about 80 pcs of used broaching machines in our stock, vertical and horizontal machines from 3000kg up 63.000kg pulling force and from 1000mm stroke up to 3500mm stroke

Year of construction: 1958, condition: used, machine/vehicle number: 1545, Manufacturer: Karl Klink Model: RIS 6 x 1000 Year of manufacture: 1958 Weight: 2500 KG General / technical data: used vertical hydraulic indoor rasping machine with 1 rasping point in a working condition tractive force: 6000 KG clearing length: 1000mm diameter of the pulling head: Ø 85 mm passage width between the cylinders: max. 280 mm Cutting speed: hydraulically infinitely variable from 1 m/min to max. 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to max. 25 m/min Space requirement of the machine: (w x d x h) approx. 1000 x 1200 x 2800mm Power supply / connected load: 380Volt 50 HZ / 4KW Accessories / special equipment: The machine is equipped with a workpiece table for 1 rearrangement. The tool clamping system is provided for a spring-mechanical locking (DIN 1415). The machine has an integrated cooling system. There is a double pulling head for 2 flat broaching tools with tool support plate. Remarks: The machine is in a good condition according to its age and is ready for immediate use. It is designed for manual production use with medium batch sizes. For the use ideally a machine pit or alternatively a platform is needed. Drawing heads are available on request. The machine has no tool feeder. The machine can be inspected in our warehouse under power. Ljdpfx Aheda Ugisvjri

Year of construction: 2000, condition: used, machine/vehicle number: 3167, Broaching-force: 16 t Stroke: 16 t Lodpjccxqtjfx Ahvori Weight: 8,5 t

Year of construction: 1982, condition: good (used), machine/vehicle number: 3120, Varinelli - internal broaching machine 25.000 kg (our Ref. No. WAG 729) machine type: internal horizontal hydraulic broaching machine manufacturer: Varinelli type: BV 25 x 2000 x 630 built in: 1982 stroke: 2000mm pulling force: 25.000KG working stations: 3 PCs drive: hydraulic system equipment: coolant system, chip conveyer remark: machine in stock, moving workpiece table Optional accessories available on request: tools, workpiece holder Information about us: we are specialized for second hand broaching machine and still have anytime about 80 pcs of used broaching machines in our stock, vertical and horizontal machines from 3000kg up 63.000kg pulling force and from 1000mm stroke up to 3500mm stroke Lrsdpfxsd I R Ngo Ahvsi

Year of construction: 1981, condition: used, machine/vehicle number: 142, Aumat M320 14873 Kst. 204/52 Operating voltage: 380 Voltage / 50 Hz Control voltage: 220 Voltage / 50 Hz Signalisation: 24 Voltage Lodpfxsc Swcho Ahvsri Perfomance: 15 KW / I: 40 A Circuit diagram: No. 142.006.3 Counter-pressure broaching slide: 20 - 30 bar Guide carriage: 40 - 45 bar Broaching compression: 13 - 90 Bar Counter-pressure guide carriage: 20 - 25 bar Vickers unit Order number: 626376 Wiring diagram number: 1420032 With chip conveyor Broaching stations: 3 With accessories

Condition: used, Year of construction: 1990, machine/vehicle number: 3048 & 3047, Manufacturer: Karl Klink Model: RKW 25-3800-520 Weight: 50t Year of manufacture: 1990 Machine No.: 3048 & 3047 General / technical data: Chain broaching machine for continuous outside broaching tractive force: 25.000kg cutting speed: 7,2 / 8,1 / 9,6m/min Lrodpeinim Tsfx Ahvji maximum tool length: 3520mm passage width: 520mm clamping area of the tool carrier: 3520 x 460 mm dimension: 12.300 x 6.400 x 4650mm power supply: 380V 50Hz / 110kW Accessories/ special equipment: - 6 tool carriers for tool change - machine documentation Remark / General The machines are in a good condition. The machines are dismantled and stored in our warehouse. The total volume of the plant is several trucks (approx. 70to per machine). The machines have produced connecting rods for passenger car diesel engines. Chain broaching machines are designed for mass production. The continuous (backstroke-free) working process in chain broaching is designed for maximum achievable productivity in external broaching. The chain broaching process is the only broaching process without a backstroke of the tools or workpieces. In chain broaching, the workpiece is continuously moved past the tool and thus performs the feed movement. and thus carries out the feed motion. This unique broaching process is only used for very large quantities in series production.

Year of construction: 1990, condition: excellent (used), Manufacturer: Arthur Klink Year of manufacture: 1990 Model: RISZ 16 x 1250 x 400 / HG Technical data: Vertical internal broaching machine in technically Ledpolpadyofx Ahvori very good condition tractive force: 16.000kg clearing speed: up to 27,5 m/min infinitely variable return speed: up to 34 m/min infinitely variable maximum stroke: 1250mm broaching units: 4 pieces accessories: - automatic tool changer - automatic part feeding (part specific) - hydraulic tool clamping device (part specific) Remark: High performance production broaching machine for high volume production with high cutting speed!

Year of construction: 1993, condition: good (used), machine/vehicle number: 03.2370, Arthur Klink - internal broaching machine (WAG 748) machine type: internal vertical hydraulic broaching machine manufacturer: Arthur Klink type: RISZ 10 x 1000 built in: 1993 stroke: 1000mm pulling force: 10.000KG working stations: 3 PCs drive: hydraulic system equipment: coolant system, magnetic chip conveyer remark: machine under power in stock the machine has an automatic workpiece loading system for 2 workpieces, ideal useable for high production Optional accessories available on request: tools, workpiece holder Information about us: Lodpfx Ahecc D Ddoveri we are specialized for second hand broaching machine and still have anytime about 80 pcs of used broaching machines in our stock, vertical and horizontal machines from 3000kg up 63.000kg pulling force and from 1000mm stroke up to 3500mm stroke.