Horizontal indoor broaching machine

Arthur Klink RIW 10 x 1200 x 400

Condition: new, Ø2.0mm/2-Axis compression spring machine. Cam-driven. Ksdpfx Ahslf Ek Do Nsll

Condition: new, functionality: fully functional, rope length: 30,000 mm, rope speed: 47,000 mm/min, machine/vehicle number: HAW1700-EV-Funk, Hydraulic winch for log splitter, crane, mini excavator, tractor, viticulture, horticulture and many other applications. With the hydraulic attached winch, you can facilitate many applications: - Pulling firewood to the log splitter and setting it up - Pull logs onto trailers - Pull out rootstocks and trees - As a winch for backhoes and small excavators - As winch for small tractors and narrow track tractors Klsdsdf Ufpopfx Ah Nel A sturdy steel construction with 3-sided mounting options (left, right, rear) with 12 threaded holes, this offers many possibilities for mounting the winch (threads are cut and painted.) The winch can also be used as a power winch. They need to be re-tapped with the tap before use because of the rust protection). A 20 m long and 6 mm thick steel cable is mounted. Large pulley for long life of the steel cable. We mount hydraulic motors from 50 to 630 cc (standard = 400 cc). Depending on what speed and traction you need. Maximum working pressure: 225 bar peak Continuous working pressure: 175 bar Displacement: 400 ccm Torque at 225 bar: 870 Nm peak Torque in continuous operation: 380 Nm Maximum tractive force: 1700 kg Weight: 49 kg Rope speed: 47 m/min at 60 L/min hydraulic oil Color: red Dimensions: length: 500 mm length with pendulum: 570 mm Width front: 120 mm Width rear: 180 mm Width bearing: + 30 mm Width motor: + 200 mm Height: 250 mm The winch is available for mounting or for welding on

Condition: excellent (used), Year of construction: 2015, Roll pressure infinitely adjustable from 240 kN feeds - fine adjustment 0,5-45 mm/min turning speeds 0-80 U/min Swivel angle of the roller heads 11 ° Kjdoxukrqspfx Ah Njll Diameter of the roller spindles 69,85 mm Stroke - Roller screw slide 0-150 mm min. dist. - roller screws 138 mm max. dist. - roller screws 285 mm min. diameter - Rolling tools 230 mm max. diameter - Rolling tools 135 mm min. dia. 2 mm max. diameter 55 mm thread length at plunge operation 200 mm thread length at continiuous operation 2000 mm maximum thread pitch 4 mm total power requirement 14 kW weight of the machine ca. 2,4 t dimensions of the machine ca. 2,0 x 2,5 x 1,9 m Rolling time continuously adjustable from: 0.1s Pause time continuously adjustable from: 0.1s Rolling spindle length: 200mm Machine bed height: 810mm Rolling spindle height above machine bed: 200 mm Height of support bearings: 115 mm Largest pitch for serrated teeth: 2.5 mm (up to 70 kg/mm2 Strength of the material)

Condition: good (used), Year of construction: 2020, machine/vehicle number: 164390-0000-Z2724, Offer 24059 Technical data: - Jaw design stepped jaws - Jaw width 125 mm - Jaw height 40 mm - Clamping width 1 0 - 216 mm - Clamping width 2 97 - 312 mm - Clamping force 40 kN - Total height 140 mm - Weight 33 kg Ksdpfx Ajrwmkaeh Nsll - Min. Space requirement L 463 x W 126 x H 145 mm

Condition: excellent (used), grinding wheel (ØxWxd): 125 x 20 x 20 mm Speed: 2800 rpm Kledpefqicxsfx Ah Nol longitudinal adjustment: 130 mm cross adjustment: 80 mm height adjustment: 65 mm rake angle: +25° to -10 Dimensions WxDxH: approx. 550 450 450 x 650 mm Weight: approx. 70 kg

Condition: good (used), grinding diameter: 1,600 mm, grinding length: 6,000 mm, Manufacturer: CINCINNATI Type: 60 x 216 Year of manufacture: 1970 Covex and Concave grinding 6 steady rest included 2 steady rest hydrostatic Coolant system with magnetic filter Klsdevvvw Ejpfx Ah Nol Measuring system with 5 arms caliber: Arm 1: Working area 1300 to 1600 mm Arm 2: Working area 1000 to 1300 mm Arm 3: Working area 700 to 1000 mm Arm 4: Working area 400 to 700 mm Specifications Metric US Standard Center height 787 mm Grinding diameter Ø 1574 mm Grinding length 5800 mm Grinding stone dimensions 914 x 101.6 x 304.50 mm Grinding stone speed 1800 rpm Dimensions (estimate) Length 15100 mm Width 5500 mm Height 3550 mm Weight 120000 kg Please note: The information on this page is correct to the best of our knowledge and belief and, where possible, has been obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and terms of contract. We recommend that you check all important details.

Condition: good (used), Year of construction: 2004, Clampable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Mounting disc diameter for cutter heads (Ø) 360 mm Mounting cone for cutter heads Nominal diameter Ø 58,227 mm travel -z axis 200 mm diagram-drawing enlargement ±10 - ± 500 µm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check Ksdpfx Ahoul Efme Nell - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Condition: used, Year of construction: 1998, turning diameter 570 mm turning length 2000 mm control total power requirement 15 kW weight of the machine ca. 3,5 t dimensions of the machine ca. m Kjdpougawfsfx Ah Njll

Condition: used, thread dia. M3 - M12 mm 400 U/min. 25 Nm air pressure 6 - 8 bar working area Radius 1000 mm weight of the machine ca. 12 kg Demonstration machine! Pneumatically driven tapping machine for M3 - M12 thread with: - stable and flexible working arm. - 6 pcs. Quick-change chuck with slip clutch. Documentation in English !! Kledpfx Asfg U Smjh Nsl optional: - Clamping table with T-slots clamping surface 900 x 600mm

Condition: used, Year of construction: 2001, Turning length 470 mm Max. torning dia. 390 mm Spindle speeds 3500 rpm Movements X/Z - 235/520 mm Kodpfxsxdfi Ne Ah Noll No of stations in turret 12 pcs. Control: MSG 500 Accessories: Various tool holders