Used Portal Measurement Machine for sale (67,547)

Condition: excellent (used), Year of construction: 2019, operating hours: 100 h, functionality: fully functional, measuring range X-axis: 800 mm, measuring range Y-axis: 1,500 mm, measuring range Z-axis: 700 mm, Equipment: type plate available, Wenzel LH87 coordinate measuring machine, year of manufacture 2019. Currently available for inspection in the measuring room. Features a 6-position tool changer with scanning and rotary/swivel measuring head, and active damping in the machine bed. Complete with original Wenzel PC workstation and Quartig software with all options. New price: €110,000. Bodpjzcu Tijfx Adrswp Technical details can be found in the data sheet.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Equipment: type plate available, PRICE REDUCED by 2,000 EUR!!! Now 17,500 EUR instead of 19,500 EUR!!!!! Taylor Hobson Talyrond 265 roundness measuring system. Extremely accurate; it can measure the roundness of lenses, optics, pistons, turbine components, tubes, shafts, and also eccentricity, e.g., of cams on a camshaft or journals of a crankshaft. It is certainly also of interest to motorsport and tuning companies. The first photo is a "representative image" from a Taylor Hobson catalog, showing what it looks like, except for the computer. A newer, smaller form factor HP computer is included. Max. diameter 350 mm Max. test piece height 500 mm (higher measurements are possible, up to a maximum of 1000 mm when measured in two parts, half and half...) Self-centering of the workpiece +/- 5 mm Max. weight of test piece 40 kg The system has been used very little and has had only two owners. The original owner, from whom I bought it, was an implant company in Hamburg. It was used in a "medically clean environment" and is extremely clean. It was never located in a dirty machine hall. The year of manufacture is estimated to be between 2002 and 2005. The Taylor-Hobson measurement software is, of course, included and runs on the supplied HP computer (without a password). Accessories are included, such as the original Taylor-Hobson desk, computer, monitor, and seven (7!) measuring probes, each of which is very expensive to purchase. A sample/sample lens (hemisphere) for calibration is also included! The very detailed operating manual is on the USB stick, and all circuit diagrams and functional diagrams are also included! The system will be shipped on two Euro pallets via a shipping company. It is already well secured on the pallets. The Talyrond 265 and the desk will be wrapped with bubble wrap, etc., and secured with stretch film to provide extreme protection during transport. The system itself is fixed with "transport safety screws." Bwedpfx Adjzcqy Ejrep Shipping costs within Germany are included; I will cover them! So, within Germany: FREE SHIPPING! The measurement system should definitely be set up and commissioned by a Taylor Hobson service technician, who will then also recalibrate the system on-site. This is now recommended after a few years. Mistakes can be made during setup and commissioning. For example, some locking screws are installed for transport; if you forget to remove them, the system may be damaged when it starts up. This is a truly well-maintained, very accurate system that will continue to provide excellent service for many years to come!

Condition: used, Year of construction: 2019, machine/vehicle number: IntNr231598, Keyence International NV/SA – KEYENCE IM-7030 Year of manufacture: 2019 The KEYENCE IM-7030 is a highly precise digital measuring projector with automatic image processing and integrated optical probe. The system has been specifically developed for fast and non-contact measurement of workpieces in manufacturing and quality assurance. Thanks to the automatic measurement process activated by the push of a button, the machine is particularly suitable for serial measurements and recurring inspection tasks. The machine combines simple operation with high measuring accuracy and enables rapid inspection of contours, diameters, distances, angles, and geometric features of various workpieces. Thanks to the wide-field and high-precision modes, both larger components and the smallest precision parts can be reliably measured. Manufacturer: Keyence International NV/SA Model number: IM-7030 Machine type: Digital measuring projector with optical probe Year of manufacture: 2019 Travel ranges in wide-field mode: X-axis: 100 – 300 mm Y-axis: 100 – 200 mm Z-axis: 75 mm Travel ranges in high-precision mode: X-axis: 25 – 225 mm Y-axis: 25 – 125 mm Z-axis: 75 mm Maximum table load: 1 kg Measuring accuracy in wide-field mode: ±1 µm at Ø100 mm ±2 µm at 200 × 300 mm Measuring accuracy in high-precision mode: ±0.5 µm at Ø25 mm ±1.5 µm at 125 × 225 mm Operation: Automatic measurement at the push of a button Control / Software: IM-H2C and IM-H2ED Suitable for series production: Yes Special features of the system include high measuring speed, simple operation without complex programming, and non-contact optical measurement technology. The KEYENCE IM-7030 is ideally suited for use in CNC manufacturing, precision engineering, incoming goods inspection, and industrial quality assurance. The machine can be inspected with power supplied after scheduling an appointment. Bjdpfx Adszaktgsrewp Changes, errors in technical data and specifications, and prior sale are subject to change!

Condition: new, Year of construction: 2025, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 800 mm, 🚀 EMO Show Highlight: VM2000 Gantry Milling Machine 🚀 – Precision. Performance. Immediately Available. Our CNC gantry milling machine VM2000 will be demonstrated live at the upcoming EMO trade fair – giving you the unique opportunity to secure this model directly from the show at a special price! 🔧 Technical Highlights: ✅ Travel range: X 2000 mm / Y 1300 mm / Z 800 mm ✅ Spindle: HSK A63, 15,000 rpm, 38 kW peak power ✅ Table size: 1650 × 1300 mm, load capacity up to 4000 kg ✅ Precision: Positioning accuracy P0.012 mm ✅ 24-position tool changer for maximum flexibility 💡 Perfect for tool & mold making, automotive, and aerospace industries. Further specifications attached and below: Category Value Control FANUC 0i MF Plus X-axis travel 2000 mm Y-axis travel 1300 mm Z-axis travel 800 mm Spindle nose to table 235–1035 mm Column distance / max. workpiece height 1820 / 1000 mm Table size (L×W) 1650 × 1300 mm Max. table load 4000 kg T-slots (width × pitch × qty.) 22 × 180 × 7 mm Spindle taper HSK A63 Max. spindle speed 15000 rpm Spindle power (cont./max.) 15 / 38 kW Max. spindle torque (cont./max.) 70 / 149 Nm Rapid traverse X/Y/Z 20000 / 20000 / 12000 mm/min Feed rate X/Y/Z 1–10000 mm/min Motor power X/Y/Z 4 / 9 / 9 kW Tool changer type Arm Tool positions 24 Max. tool diameter φ75 / φ130 mm Max. tool length 300 mm Max. tool weight 8 kg Positioning accuracy P0.012 mm Repeatability Ps0.010 mm Air pressure 0.6–0.8 MPa Coolant flow 99 L/min Power supply 3/PE, AC380V, 50Hz Power consumption 60 kVA Machine dimensions (L×W×H) 5000 × 4910 × 4600 mm Machine weight 21000 kg Main Features 1 FANUC 0i-MF plus absolute, type 0 system, 15-inch color LCD 2 iHMI + manual I 3 Max.1500, min.400 block look-ahead 4 Data server (2GB) 5 Fast Ethernet card 6 Straightness compensation interpolation 7 Custom operator panel 8 Rigid tapping 9 Transformer 10 Work area lighting 11 3-color signal beacon 12 Portable MPG 13 Automatic power-off 14 Safety door interlock 15 Foot switch and tool release button 16 Coolant tank level monitoring Bedpfew N I A Dox Adrswp 17 Direct-drive spindle HSK A63, 15000 rpm 18 Spindle oil chiller 19 Air blow for machining 20 Coolant system 21 Spindle air seal 22 Air gun / water gun 23 Grease lubrication system 24 Pneumatic system 25 Full enclosure 26 Electrical cabinet air conditioner 27 Swiveling control cabinet 28 Separated cabinet for high & low voltage 29 Hinged chip conveyor 30 Adjustable leveling pads & foundation blocks 31 Tool kit 32 Operating manuals 33 Spiral chip conveyor 34 Operation manual 35 Spiral chip conveyor 36 CTS, 20-70 bar, including through-spindle air 37 Oil separator (Chinese brand) 38 Arm-type ATC, 24 tools 39 FAGOR absolute linear scales on X, Y, and Z axes 40 Encapsulated iron package 👉 Get more info & secure the special price: New CNC Gantry Milling Machine Skymaster VM2000 – Kraft Werkzeugmaschinen

Condition: not inspected (used), Mitutoyo Quick Scope QS250Z1J Measuring range (X×Y×Z): 200×250×100mm Resolution / length standard: 0.5μm / linear encoder Image transmission unit: 1/3" color CCD camera Measuring accuracy: XY: (2.5 + 6L/1000) μm Z: (5 + 6L/1000) μm Moving speed (max): 80mm/s Acceleration/deceleration (max): 250mm/s² Glass size: 269 × 311 mm Maximum load capacity: 10kg Illumination: Contour illumination: 12V/30W halogen Bwsdpfx Ajzb U Anjdrjp Reflective illumination: 12V/50W halogen Fiber optic ring illumination: 12V/100W halogen Main dimensions (W×D×H): 465 × 815 × 663mm Weight: 76 kg (169 lbs) Maximum power consumption: 970W Optical system 0.5X–3.5X (20X–137X monitor magnification), 8 steps, 7X zoom. Required operating software Mitutoyo Quick Scope QS250Z1J is the default operating and measuring software for QSPAK

Condition: used, Year of construction: 1978, machine/vehicle number: 27309654, x-travel:1600 mm y-travel:1000 mm z-travel:1300 mm size of plate:1.500 x 800 x 120 mm capacity Y-axis:175-1210 mm capacity Z-axis:0-810 mm digital readout:Grundig 3-achs-Digimeß digital readout:235 x 80 x 130 mm total power requirement:0,04 kW weight of the machine ca.:2 t dimensions of the machine ca.:2,0 x 1,5 x 1,63 m Bwodpfscxxwrox Adrjp 3-D coordinate-measuring machine with caste precision plate fine-scraped, with 4 feet 2000 x 1500 mm, approximately 20 different marking and testing probes, equipped with STIEFELMAYER type "A" guidance system

Condition: used, Year of construction: 1991, table length:1500 mm table width:1000 mm daylight:800 mm Bodpfxscxxwuj Adrowp measurement range X =:1400 mm measurement range Y =:1000 mm measurement range Z =:800 mm weight of the machine ca.:1,6 t dimensions of the machine ca.:2,0 x 1,8 x 2,1 m 3-D coordinate-measuring machine, caste measuring plate with finely machined surface with T-slots, ZETT-MESS evaluation computer system, EPSON-statistical printer, machine equipped with temperature stabilizing heating and video camera, for TV-transmission of microscope-picture capture, additive cold light source with two flexible fibre optics, Sony-Mavica video printer, good condition

Condition: used, x-travel:600 mm y-travel:fest mm z-travel:650 mm weight of the machine ca.:ges. 0,124 t dimensions of the machine ca.:0,7 x 1,0 x 1,05 m surface measuring, testing and evaluating unit for roughness and unevenness parameters with measuring post and feed device, incl. data logger with profile memory and full digital measured-value processing, fully programmable, evaluation according to different evaluation programs with single measuring run, reference-plane measuring on badly aligned, curved and tilted surfaces, automatic correction of height offset and tilt, measuring program with permanent storage and quick access, clearly arranged control elements, universal by plug-in program module for special functions, measuring post PST-Se, large black granite base plate with a 14 mm T-slot, table 650 x 450 mm, PRK feed device, adaptable precision scanning device for roughness, unevenness and form measuring, tracing length 1,5-60 mm, Bwodpfx Ascxxrgsdrep guidance accuracy 2 µm, tracing speed 0,5 and 0,1 m/s, automatically adjustable, return speed 1,5 m/s, standard - interval and terminal contact operation, extensive accessories, exchange calliper, calliper height-adjustable, calliper holder, calliper, etc.

Condition: used, Year of construction: 1983, machine/vehicle number: 16340283, table length:2000 mm table width:1000 mm Bedpfscxxzisx Adrswp weight of the machine ca.:2,9 t Novalyth stone table with integrated T-groove, Grundig MZ 1030 measuring computer, 5 height-adjustable feet.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, measuring range X-axis: 500 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 400 mm, Equipment: type plate available, Coordinate measuring machine Mitutoyo EURO M 574 in excellent condition for sale. without computer and software year of manufacture: 1998 without PC!!! X - axis 500 mm Y - axis 700mm Z - axis 400 mm resolution: 0.0005 mm Measuring table material Granite Renishaw MH 20i probe head, Granite bed size 850 mm x 1160 mm, length standard: high-precision linear encoder centering microscope: mitutoyo CF-10 fixing and fine adjustment: one-touch air clamp for each axis continuous fine adjustment throughout the entire stroke range of each axis. effective size: 680x1160 workpiece clamping method: threaded insert M8X1.25 workpiece: Dimensions between columns 720 mm, maximum height: 480 mm maximum weight: 160 kg without PC Length measurement uncertainty ISO 10360 E = [3.5 + 4.0L/1000] µm Bodpfou E Uzxsx Adrewp in the temperature range of 18 ... 22 °C machine weight: 450/540kg

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, overall weight: 980 kg, measuring range X-axis: 700 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 500 mm, Coordinate measuring machine Coord3 ARES NT 7.7.5 Year of manufacture: 2014 Motorized indexable head Renishaw PH10M Bwjdpju E U Hbjfx Adrsp hand controller: Renishaw MCU LITE-2 MPEe accuracy: 2.5 µm + L/300 Repetition accuracy: from 2.3 µm Measuring range: 700 x 700 x 500 (mm) Granite bed size: 1330x963.5x170mm Software: TouchDMIS 5.2 + dongle The Z-axis support column is made of silicon carbide, which increases rigidity. DC servo motors, air bearings on all axes, free-floating linear scales with 0.1 µm resolution.

Condition: used, Year of construction: 2001, functionality: fully functional, DEA Brown & Sharpe Mistral 07.07.05 Cordinate measuring machine. Working area 700×700×500 mm. Equiped with Renishaw PH10M Probe Head Last calibrated on 05 Sep 2023. Bwodpfx Adey N T Sxjrsp Ready for shipment.

Condition: good (used), Year of construction: 2010, functionality: fully functional, measuring range X-axis: 250 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, Software: QVPAK V10.005 Bwsdpfx Adeu Sqmdsrop

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,200 mm, travel distance Z-axis: 1,100 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, table length: 4,000 mm, table width: 2,000 mm, spindle speed (max.): 22,000 rpm, torque: 128 Nm, spindle nose: 63, CNC Heidenhain iTNC 530 S.P. WORKING AREA Longitudinal X-axis travel: mm 4.000 Transversal Y-axis travel: mm 2.200 Vertical Z-axis travel: mm 1.100 Maximum speed with interpolating axes: m/min 50 Bwjdjzb Evlepfx Adrjp WORKTABLE Dimensions: mm 4.000 x 2.000 Height: mm 300 Load capacity: T/m² 15 T-slots for workpiece clamping mm 28 DIN 650 (H12), complete with leveling elements. T-slot direction parallel to X-axis movement. AXIS CHARACTERISTICS Axis feed rate: mm/min 50.000 Acceleration: m/s² 4 WORKING AREA (CLEARANCES) Maximum horizontal clearance: mm 3.200 Maximum vertical clearance under crossbeam: mm 1.926 Height of worktable from floor: mm 330 CONTINUOUS POSITIONING UNIVERSAL HEAD WITH ELECTROSPINDLE Automatic universal head indexed to 360,000 positions (every 0.001°). Rotation is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows 10° undercut machining. Internal cooling system for bearings and axis motors. B-axis rotation range: ± 185° A-axis rotation range: ± 185° Maximum axis rotation speed: rpm 30 Maximum torque available on A/C axes: Nm 450 Axis clamping torque: Nm 1.400 Spindle power (S1/S6): kW 22/33 Spindle torque (S1/S6): Nm 84/128 Maximum spindle speed: rpm 22.000 Tool interface: HSK-A63 DIN 69893 The head is supplied complete with a cradle for handling and storage. The cradle is used outside the working area and therefore does not reduce the machine’s actual working capacity. CHAIN TOOL MAGAZINE – 30 POSITIONS (HSK) 30-position automatic chain tool changer located at the rear side of the working area, fully protected from dust and chips. Tool type: HSK-A63 DIN 69893 Max tool diameter (adjacent pockets occupied): mm 90 Max tool length: mm 300 Max tool weight: kg 10 MEASURING SCALE PRESSURIZATION Pneumatic system complete with control unit for pressurizing the measuring scales. SPRAY-MIST TOOL LUBRICATION/COOLING Mist lubrication system. The mist is generated by mixing air and oil and is controlled via M-function. The spray-mist improves cutting quality, prevents built-up edge formation, keeps the cutting area clean, and provides cooling. Highly effective for improving surface finish quality. EXTERNAL TOOL COOLING Coolant distribution system controlled by the CNC, with nozzles positioned on the flange around the spindle. Complete with a tank (1,200-liter capacity) for coolant collection and filtration. Flow rate: 30 l/min, pressure: 4 bar. REQUIRED CONNECTIONS Maximum installed power: kW 150 Maximum current required: A 235 MACHINE EQUIPPED WITH: • Heidenhain HR550 remote electronic handwheel • Various tooling included with the machine • Renishaw probe • BLUM laser presetting system • AUTOCAL automatic head calibration system • Visormax subscription for remote monitoring • Electrical cabinet air conditioning unit • Cooling system for all axes and the electrospindle • No. 2 chip conveyors positioned on both sides of the worktable • User and maintenance manual and CE declaration of conformity

Condition: like new (used), Year of construction: 2019, functionality: fully functional, measuring range X-axis: 1,000 mm, measuring range Y-axis: 1,500 mm, measuring range Z-axis: 800 mm, workpiece weight (max.): 1,600 kg, total height: 3,073 mm, total width: 2,652 mm, total length: 1,624 mm, overall weight: 2,570 kg, Equipment: documentation/manual, Our company offer for sale CMM COORD3. This rarely used machine was used by our company as a DEMO machine for technician education or at trade shows. The machine has a granite worktop. The individual axes are mounted on air bearings. Our company is able provide all necessary steps for moving and commissioning. COORD3 Universal 10.15.08 Measure dimension: X 1 000 mm; Y 1 500 mm; Z 800 mm Measure accuracy: MPEe = 2,0 + L/333 (L in mm) MPEP= 2,1 µm. Machine dimension: length 1 624 mm width 2 652 mm high 3 073 mm Measuring plate dimension: 1 000 x 2 330 mm Probing components: probing head RENISHAW PH10M measuring probe RENISHAW TP20 CMM controller: Metrologic ME5010 CMM keyboard: Metrologic ME471 PC with minimal configuration: Windows 10, 64 bit, CPU - i7, RAM - 8 GB, HDD - 250 GB, graphic card NVIDIA FX QUATRO supporting Open GL 2.1, ports - USB, LAN (RJ45), VGA a HDMI. Display 1920 x 1200 DPI, VGA, HDMI. Measuring software: Metrolog X4 CNC Bwsdpswrm Tujfx Adrjp

Condition: used, Year of construction: 1998, Technical details: x-travel: 870 mm y-travel: 870 mm z-travel: 800 mm table surface area: BxT: 1.260 x 1.050 mm distance between columns: 1.260 mm Laser measuring system with ZETT3D geometry program The table is made of granite and has 48 mounting holes M6 integrated. With interface module Renishaw type P14-2 On machine is currently installed a shaft with probe pin 60mm (without extension) Probeset Renishaw type PH-1 stored in a wooden box. Operation manually, operated control panel with 2 control knobs, keyboard and 4-line LCD display. Accessories: various probe tips and extension, calibration ball Printer Bwodpfx Adju N At Rorop Computer (Software Windows NT) Last calibration was at 06/2006. *

Condition: used, Year of construction: 2002, Technical details: x-travel: 505 mm y-travel: 405 mm z-travel: 405 mm measuring range X-axis: 505 mm measuring range Y-axis: 405 mm measuring range Z-axis: 405 mm compressed air: 0,4 MPa voltage: 100/120/220/240 V / Hz total power requirement: 700 Watt machine weight approx.: 0,5 t dimension machine xH: 1,1 x 1,1 x 2,185 m further features: -it is a linear measuring system with resolution 0.0001mm -measuring speed X/Y+Z-axes 430 mm/s -acceleration X/Y+Z-axes 980 mm/s² -measuring table made of granite, size LxW: 638 x 860mm, with workpiece clamp -max. tool size height max. 545mm weight max. 180kg Equipment: -Measuring probe Renishaw TP200 -Computer Fujtsu - Siemens Scenic P; protection class IP30 -without measuring probe -Software available (USB Stick) Bwedeu S Izcspfx Adrjp *

Condition: good (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 14065, measuring range X-axis: 640 mm, measuring range Y-axis: 600 mm, measuring range Z-axis: 500 mm, workpiece weight (max.): 300 kg, total height: 2,320 mm, type of input current: AC, total width: 940 mm, total length: 1,040 mm, travel distance X-axis: 640 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, input voltage: 230 V, travel speed (max.): 60 mm/min, Equipment: type plate available, This machine was refurbished and brought up to its current state in 2020 for €10,600.00. For example: Aberlink joystick with color display. Precise coordinate measuring machine, CNC-controlled, with MH20i/Renishaw probe & software. Fully functional, immediately available. Measuring range X = 640 mm Measuring range Y = 600 mm Measuring range Z = 500 mm Function: CNC Resolution 0.5 μm Max. workpiece weight 300 kg Max. travel speed 600 mm/sec² Air supply min. 5 bar Dimensions L = 1040 mm Dimensions W = 940 mm Dimensions H = 2320 mm Type X-axis Y-axis Z-axis Accuracy Max. workpiece weight Year of manufacture 2012 Bsdpoy Iptcefx Adrjwp Calibration 2023 The machine is ready for demonstration. The buyer must disassemble the machine and load it themselves.

Year of construction: 2010, condition: good (used), 2 aluminum tables for measuring machine Manufacturer: MEUSBURGER, Type: BST 5500, Year: 2010 Dimensions: Length 5500 mm, Width 1200 mm, Height 700 mm Bwjdpfx Aog Uf Ngjdrep In good condition.

Year of construction: 2000, condition: used, Spare parts for measuring machine MORA Mü-Tos. Includes: 2 measuring stands, 2 measuring control units, and various other parts. Bwjdpfxeiuiaus Adrop

Condition: used, Year of construction: 2016, measuring range X-axis: 300 mm, measuring range Y-axis: 250 mm, measuring range Z-axis: 150 mm, Coordinate measuring device for simple inspection of components directly on the production floor. Measurement routines can be visually displayed step by step for untrained operators. The device was purchased in 2016 but was used only briefly as it proved unsuitable for the intended application. It is in nearly new condition and comes in its original packaging. Bwedpfszbvqyjx Adrsp Manufacturer: Keyence Model: XM-1000 Year of Manufacture: 2016 Measuring range: 300 x 250 x 150 mm Repeatability: ±3 µm Measurement deviation: ±8 µm Equipment: - XM-1000 measuring system - XM-1500 measurement computer - XM-P1000 measuring probe - Several probe heads / balls - Documentation - Original packaging

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 400181806, Mitutoyo CV-3200H4 CONTOUR MEASURING CONTRACER; MFG: 2018, code no.: 218-482-10D, SN: 400181806, made in Japan. Expands measurement range while reducing workpiece interference. Mitutoyo’s newly designed detector arm lowers workpiece interference while expanding the measurement range in the Z1 axis (detector). Auto stop feature assures safety even during high-speed movement The detector includes a safety mechanism (auto stop upon collision) to assure measurement safety even during high-speed movement. If the arm is removed or shifts during measurement, the safety mechanism is triggered and stops the machine. Measuring range: X axis -100mm Measuring range: Z2 axis (column) travel range 3 - 60mm (±30mm in horizontal situation) Z2 axis (column) travel range: 3 - 500mm Bodpfx Aowz Sxnedrewp Detector (Z1 axis (detector unit)) Scale unit - Arc scale Resolution 0.04µm Stylus up/down motion: arc movement Measuring direction: both pulling and pushing directions Measuring face direction: downward or upward Measuring force: 30mN (by adjusting weight) Stylus traceable range: Ascent 77°; Stylus traceable range: Descent 83° (with one-sided cut stylus: standard accessory); Drive unit Scale unit: Separate type linear encoder Z2 axis (column) ABS encoder Resolution X axis 0.05µm Resolution Z2 axis (column)1µm Drive speed X axis 0 – 80mm/s and manual operation Drive speed Z2 axis (column) 0 – 30mm/s and manual operation Measuring speed X axis 0.02 – 20mm/s; Straightness (when the X axis is horizontal) X axis 0.8µm/100mm X axis inclination angle: X axis ±45° Accuracy (20°C) CV-3200 X axis ±(0.8 + 0.01L) µm L = Drive length (mm) Wide range: 1.8µm/100mm Narrow range: 1.05µm/25mm; Accuracy (20°C) CV-3200 X Z1 axis (column) ± (1.4 + | 2H | /100) µm H = Measurement height from the horizontal position; External dimensions (W×D×H): Main unit: 756×482 ×1166mm External dimensions (W×D×H): Controller: 221×344×490mm External dimensions (W×D×H): Remote box: 248×102×62.2mm Mass: Main unit: 150kg Mass: Controller: 14kg Mass: Remote box: 0.9kg Operating temperature range: 15 – 25°C (within ±1K temperature fluctuation on calibration and measurement) Operating humidity range: 20 – 80%RH (with no condensation) Rvcunpih32 Storage temperature range: −10 to 50°C Storage humidity range: 5 – 90%RH (with no condensation) Price: 12.700 Euro + VAT, negotiable, Ex Works Oradea, Romania. Please make an offer. Irrtum, Änderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale /

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, TECHNICAL DATA Accuracy: from 3.0 + L/250 µm Measuring range X-axis: 3,500 mm Bjdsyr Simspfx Adrjwp Measuring range Y-axis: 6,000 mm Measuring range Z-axis: 2,000 mm Type of input current: Three-phase Equipment: Lighting, documentation/manual, nameplate available Details of the offer Description Portal measuring machine Manufacturer: Mora Type: U204-20-35-60 Measuring software: Manufacturer Gemodek, Type MS10 Control panel on wheels Measuring and evaluation unit 2 PCs, Manufacturer HP, Type XW4300/Z220 2 monitors, 19/24", Roller shutter cabinet, telescopic drawer cabinet, Manufacturer Lista, W 1,000 mm, 7 drawers. Contents: Infrared measuring probe, Manufacturer Renishaw, Type PH10M, Calibration mandrel, accessories

Condition: excellent (used), – Mitutoyo dial test indicator, model 513 454 – accuracy 0.01 mm – lever type (test indicator) – antimagnetic version – Made in Japan – Mitutoyo magnetic base Bwedpfx Asw Rdi Ajdrsp – model 7011SN – ON/OFF lock – robust, stable, with precise clamping mechanism – Made in Brazil – The set is fully functional. Stable guidance and precise readings. – Ideal for tool setup, run-out checking, and inspection measurements.

Condition: ready for operation (used), Year of construction: 1992, X-axis: 700mm, Y-axis: 600mm, Z-axis: 450mm, measuring system: linear encoder, resolution: 0.001mm, max. workpiece weight: 500kg, max. workpiece dimensions: 500x500x500mm, compressed air connection: 5bar, mains connection: 220V/50Hz, weight: 1.15t, software: Mitutoyo GEOPAK 3 MAN, Mitutoyo SCANPAK 3 v3.01 MAN, equipment: PC with monitor, keyboard and control unit, measuring probe with accessory case, clamping devices and further accessories, operating manuals and documentation available, condition: fully functional, software runs perfectly, regularly serviced, calibration carried out before trade fair use, no known defects. An inspection on site is possible. Bwedjzbl Nrspfx Adrep