Used Emulsion for sale (251)

Condition: excellent (used), IAG High-Performance Separator Model: MF500 Year: 2019 Capacity: 600 l/h Voltage: 400V Suitable for coolant lubricants, cleaning solutions, aqueous solutions The mobile MF separator is used wherever micro-contaminants and tramp oil need to be removed from aqueous fluids. Even when the contaminants are smaller than the actual components of the fluid, the MF separator reliably removes them without the slightest impairment of the original liquid. Tjdpjxr A Uxofx Af Tjf Example in cast machining: Removal of graphite from water-mixed coolant lubricant. In such cases, the contaminant is up to ten times smaller than the actual emulsion oil droplets. A particular advantage: In every application, the liquid is thoroughly aerated. The mobile MF separator can be used to service multiple machines and tanks one after the other. The MF separator can operate unattended day and night, as it is equipped with self-monitoring capabilities.

Condition: new, Year of construction: 2025, Available in stock Advantages: Universal assembly system. Pump system with the built-in filter for filling in/out the tank with bitumen emulsion. Built-in heating system (gas propane burner). Tjdpfx Ajd Swg Hsf Tef BS-500 can be mounted on a trailer or transport vehicle like a pick-up. Asphalt Sprayer BS-500: Power block (Petrol Engine HONDA GX-160, air-cooled - 3.6 kW). Engine power – 3.6 kW. Fuel gasoline. Hand spraying rod length – 4 m. Spraying bar length – 7 nozzles. Emulsion tank – 500 l. Warranty – 1 year.

Condition: good (used), Year of construction: 2013, machine/vehicle number: 1305, Offer 21369 Technical Specifications - 4-stage oil mist separation - Electrostatic air filter with filter elements - Pre-separation with washable pore filter - Fine filtration with compact filter - HEPA filter (H 13) Tjdpfjv I Tfdsx Af Tof - Air flow rate approx. 4000 m³/h - Extraction pipe diameter 315 mm - Drive - Fan 400 V / 3 kW - Space requirement approx. W 750 x H 2900 x D 750 mm - Weight approx. 500 kg

Condition: ready for operation (used), Emulsion Treatment System with Chip Conveyor,vacuum rotation filter KNOLL VRF 250, Used Machine Todpfow T U Nrex Af Tef Manufacturer: KNOLL Type: VRF 250 Overall dimensions: Width: 2300 mm Depth: 1860 mm Height: 2300 mm Weight: 1140 kg Year of manufacture: 2020 Electrical data: 400V; 14.64 kW Tank capacity: 1450 l Filter capacity: 250 l/min

Condition: good (used), Emulsion splitting system, oil-water separation system (for the removal of condensation water from compressors) The most cost-effective and permanently reliable solution to the problem is usually the oil/water Tedpfx Afsgvu Tgo Tjf separation for dispersed condensates. The purified water complies with the legal regulations for sewer discharge

Year of construction: 2014, condition: ready for operation (used), A coolant separator is available. Volume flow: 4000m³/h, total pressure: 2000Pa, power: 4kW, connection diameter: 75mm, material: stainless steel. Documentation available. On-site inspection is possible. Todpswnr Ipefx Af Tjf

Year of construction: 1995, condition: used, machine/vehicle number: 4141, Emulsion maintenance trolley FA-300/U Blotenberg, filter unit -WT 114- Offered here is an emulsion care trolley/emulsion filter of the company Blotenberg. Technical data: Manufacturer: Blotenberg Saugsysteme Type: FA-300/U Motor power: 0,25kW/ 220V / 3,1A Year of manufacture: 1995 Flow rate: 300l/h Serial number: 4141 dimensions: 1000 x 900 x 450mm Suitable for: Emulsion Coolant Cleaning solution Wet cutting machine tools Parts washers Todelf D Ugspfx Af Tef Mode of operation according to the manufacturer: The emulsion maintenance cart continuously draws in the contaminated emulsion mixture, separates the substances and returns the cleaned emulsion to the machine. All this is done purely physically - no spinning or centrifuging.

Condition: new, Year of construction: 2025, BITUMEN EMULSION SPRAYER BS-2000 - Spray bar for 11 nozzles with a width of 2.4 m - Spray width with tyre - 2.4-2.8 m - System cleaning - 3-level, diesel fuel - Tanker self-pumping function - Mounting on a frame or on a trailer on request - Emulsion tank heating system - Own 2000 l tank - Possibility of connecting a third-party compressor for cleaning the sprinkler bar - Mechanical thermal sensor - Lance for manual sprinkling Todpfx Afevpg Eae Tef Completing: - Tank truck 2000 l - Power block - Hose - 4m with rod and nozzle for manual spraying - Hoses for supplying bitumen emulsion - Spray bar for emulsion with 11 nozzles - Gas burner with regulator Specifications: Power block (Petrol Engine HONDA GX-200) Engine power – 4.1 kw - Spray rate of bitumen emulsion with hand lance4 l/min - Spraying rate of bitumen emulsion through tyre 55 l/min - Engine 4-stroke petrol engine with air cooling - Bitumen emulsion consumption 0.8 l/m2 - Tank capacity 2000 l - Recommended gas cylinder 27 l (not included) - Overall dimensions (portable) without trailer 257*190*160 cm - Shoulder weight (without emulsion) 715 kg Price: 9600 Euro (Netto) Price on the trailer: 15000 Euro

Condition: good (used), Manufacturer: KNOLL Machine type: KTS-40-60-T-G Overall dimensions: 550 x 600 x 1800 mm Output:18,5 kW RPM: 2930 Loading capacity depending on viscosity. Tjdpok E Dxksfx Af Tof

Condition: new, Year of construction: 2025, Bitumen Emulsion Sprayer BS-1000 Bitumen Emulsion Sprayer BS-1000 is designed for priming the surfaces prior to asphalt laying, asphalting adjacent areas, as well as for pouring seams and cracks with bitumen emulsion. Bitumen emulsion is supplied from a 1000 l tank, which is installed directly on the fixing platform. Heating system allows the bitumen emulsion to be sprayed in a cold time. It is easy to use. It has its own cleaning system. Made on a steel frame, or mounted on a trailer. SPECIFICATIONS: - Productivity – 36 l/min. - Spraying width - 2,2 m. - Cleaning System - 3-level, diesel fuel. - Self-pumping function of the tank. Tedjvptnuepfx Af Tsf - Installation on a frame or on a trailer at the customer's request. - Heating system of the emulsion tank. - Tank 1000 l. - Possibility of connecting an extra compressor for spraying bar cleaning. - Thermal sensor - mechanical. - Hand spraying rod

Condition: ready for operation (used), Emulsion Treatment System, Knoll 320 s-1/200, FKA/950, Used Machine Manufacturer: Knoll Type: FKA/950 Chip Conveyor: 320 s-1/200 Year: 2015 Key Features: High-quality German industrial technology Robust and reliable design Efficient filtration for cooling and lubricating fluids Ideal solution for central or local filtration systems Application Areas: Mechanical engineering Metalworking Tedpfswmmvrsx Af Tsf Fluid management for CNC machines and production lines Cleaning of cooling and lubricating emulsions

Condition: new, functionality: fully functional, Year of construction: 2025, Bitumen Emulsion Sprayer BS-200 Bitumen Emulsion Sprayer BS-200 by TICAB TM is an optimal equipment for small patching repairs, as well as for road works in a limited space (yards, alleys) and for sealing areas and cracks. SPECIFICATIONS: - Productivity - 400 m² per 1 hour. - Consumption of bitumen emulsion - 200 l/h. - Hand Spraying Rod - 4 m. - Cleaning System - 3-level with diesel fuel. - Function of tank self-pumping. Tsdpfxet If A De Af Tjf - Strong metal frame on wheels for easy movement. - Heating system of the tank with emulsion.

Condition: good (used), Year of construction: 2003, Filter rinsing tank Filtering takes place through an internal filter unit - Manufacturer: Atlantik GmbH - Model: 30.701.31.15100 - operating pressure: 10 bar - filtered grain size: 6.0 µmm (micron mm) - Overall dimensions: 1050 x 1150 x 1620 mm - Capacity: 425 L Tsdpfx Afjiw Eafs Tjf - Electrical data: 250V, 5A, 50/60Hz - Year of manufacture: 2003

Condition: new, functionality: fully functional, Year of construction: 2025, BS-500 PRO Even the best road coating wears during exploitation. Heavy traffic, unfavorable weather conditions, and other factors negatively affect the asphalt. Bitumen pressure distributor BS-500 PRO – is the number-one equipment to protect the load-bearing structure of the road with surface treatment. The model has a safe and inexpensive heating system, responsible for maintaining the required temperature of the emulsion. The 500-liter emulsion tank is insulated with solid mineral wool. Technical Specifications Engine power (petrol, air cooled)-4.3 kW (5.8 hp) Emulsion tank capacity-500 l Productivity-28 l/min Tjdpfovuaccex Af Tef Nozzles on the spraying bar- 7 pcs Spraying width-1.7 m Diesel cleaning system Spraying bar is modularised, consisting of 3 sections, with rubber protection plates that protect against contamination and emulsion in unplanned areas Remote control of the spraying bar Electric starter Tank self priming function Emulsion tank heating system Ability to connect a third party compressor for cleaning the spraying bar

Condition: used, Year of construction: 2007, Technical details: weight of the machine ca.: 24 t dimensions of the machine ca.: 3900 x 3500 x 2500 m Tsdpex Aq Etefx Af Tef -the machine has no B axis -two grinding spindles with one grinding wheel each - The transport instructions can be found in the documentation (attachment). including Hoffmann KSM filter system Loading list available Operating data v. : Operating time: 21727 h / production time: 11960 h Machine documentation: 1 set of circuit diagrams, electrical plans, operating instructions Accessories: 2 replacement measuring heads Marposs S/500; prism supports Other: Hoffmann KSM filter system Machine condition: according to age, due to processing with emulsion *

Year of construction: 2009, condition: used, Empty weight: 750 kg Cargo space capacity: 2 l Manufacturer: Romaco - Frymakoruma Model: Dinex Lab Year: 2009 Type: Vacuum mixer for R&D or small-scale production Application: liquid and/or viscous (semi-liquid) products = dispersion, homogenization, emulsion, grinding, and pumping of the product Tank: Pressure: -1 / 0 bar Volume: 18 L Temperature: 130°C Jacket: Pressure: 6 bar Volume: 2 L Temperature: 180°C Homogenizer: high-speed agitation 2 modes = Pumping with discharge / Dispersion with high shear force Tool size: 100 mm Rotor: 20 x 4 mm Stator: 30 x 4 mm VEM motor 7.5 kW / 2890 RPM Scraper mixer: slow agitation Tjdpsx Ai Umsfx Af Tjf SEW 0.37 KW motor Sterling SIHI LEMA 25 liquid ring vacuum pump Power 1.1 KW - Max. 16 m³/h. CIP (clean in place) 2 x feed hoppers, 1 of which is connected to the jacket with its piping Air pressure: 6 bar Water pressure: 6 bar Temperature control regulator Single-acting seal: reconditioned by Burgmann Paper documentation Weight: 750 kg

Condition: good (used), Year of construction: 2009, operating hours: 18,900 h, functionality: fully functional, CNC 5-Axis Machining Centre – DMG DMC 80 U duoBLOCK NC rotary table Clamping area: Ø 800 x 630 mm C-axis resolution: 0.001° Max. workpiece weight: 1,200 kg Max. table holding torque: 5,000 Nm Max. table speed: 30 rpm Permitted moment of inertia: max. 205 kgm² (H12) T-slots: 5 × size 14, spacing 100 mm Centre bore: Ø 50 H6 mm Universal NC milling head / spindle B-axis: stepless 180° B-axis resolution: 0.001° Spindle type: motor spindle Max. power (S3, 40 %): 28 kW Max. torque (S3, 40 %): 121 Nm Speed range: 20 – 18,000 rpm Tool interface: HSK-63, DIN 69893 form A Tool changer / magazine Automatic tool changer 120 tool stations Max. tool length: 450 mm Tsdpfx Afox Ahl Ro Tof Max. tool weight: 15 kg Machine size & weight Required floor space: approx. 4,500 × 4,600 mm Total height: approx. 3,400 mm Machine weight: approx. 17,500 kg Electrical data Supply voltage: 3 × 400 V Frequency: 50 Hz Connected load (100 % duty): 64 kVA Required mains fuse: 100 A Equipment / Accessories Heavy-duty duoBLOCK design with NC rotary table, tool magazine and pallet changer NC swivelling milling head with 18,000 rpm motor spindle for 5-axis simultaneous machining 3D CNC control HEIDENHAIN MillPlus iT HSK 63 spindle interface with internal coolant supply (through-spindle coolant) Direct measuring systems (glass scales) in all three axes SmartKey for operating modes 3 and 4 120-position tool magazine with automatic tool changer 2 exchangeable pallets Ø 800 × 630 mm Swivelling operator panel Extraction system for oil / emulsion mist with separator Chip conveyor, discharge height approx. 956 mm Intermediate tank with feed pumps and 40 bar high-pressure pump Machine prepared for central coolant supply Coolant / chip cleaning gun 3 mounting / leveling elements 3D touch probe Machine in new design Power-on hours: approx. 59,500 h Operating (cutting) hours: approx. 18,900 h

Condition: used, ? Polygonmach PVB150 Mobile Concrete Plant | Cold asphalt plant, RCC mixing plant, soil compound mixing plant. Emulsion mixing plant ? Polygonmach PVB150 is a next-generation mobile concrete plant designed to meet the demands of modern construction projects for speed, flexibility, and cost-efficiency. It offers dual-mode production – both Volumetric and Batch type operation – on a single platform, delivering perfect compatibility for all project types. ✅ Dual-Mode Flexibility: • Volumetric Mode: On-demand, instant production up to 200 m³/hour directly at the site • Batch Type Mode: Precision recipe-based production up to 100 m³/hour ✅ Key Features: • Fully Automatic or Manual Operation: User-friendly control panel allows seamless control • Precision Weighing System: Ensures accurate dosing, minimizes material waste • Multiple Mix Recipes: Easily switch between different mix designs • Separate Storage Bins: 3x8 m³ aggregate hoppers, 5-ton cement silo, water & additive tanks • Filling Conveyor: Fast and efficient loading • Quick Setup: Ready to operate in just 10 minutes • Fully Mobile: Maximum ease in site-to-site transportation • Low Logistics & Transport Costs: On-site production eliminates ready-mix losses • Sustainable Production: Mix only what you need, when you need it • Recycling-Friendly: Supports the use of recycled materials when needed ⸻ ? Multi-Purpose Capability – One Platform, Many Solutions: Todpfx Aex Admdef Tsf In addition to concrete production, the PVB150 is engineered to serve as: • Mechanical Stabilization Plant • Cold Asphalt Mixing Plant • Emulsion Mixing Plant • Soil Compound Mixing Plant This multi-functional system makes Polygonmach PVB150 the most versatile solution on the market for road construction, infrastructure development, and short-term or small-to-medium scale projects. ⸻ ?? 100% Made in Turkey | Smart Technology | High Performance | Eco-Friendly Operation ✅ Replace fixed plants with a smarter solution. ✅ Reduce setup costs, increase mobility, boost site efficiency. ⸻ ? Contact us today and transform your jobsite! ? ? ?

Condition: used, Year of construction: 2006, functionality: fully functional, Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 mm Swing diameter over face slide: 260 mm Face slide travel: 380 mm Main drive Drive power AC motor - 40/60/100% duty cycle: 33/27/22 kW Spindle box Spindle bore diameter: 106 mm Spindle diameter in front bearing: 140 mm Speed range (V constant): 1 - 2,000 rpm Cross slide Feed range, face: 0.001 - 1,000 mm/rev Feed range, face, optional up to: 5,000 mm/rev Feed range, longitudinal and thread pitch: 0.001 - 2,000 mm/rev Feed range longitudinal and thread pitch, optional up to: 13,000 mm/rev Feed force flat: 9,000 N Feed force longitudinal: 12,000 N Automatic tool turret Number of tool stations: 12 With tool drive for 6 stations Tool holder system (DIN69880) VDI40 Equipment SIMENS SINUMERIK 840D sl (Shop Turn with manual functions) Todpjxz D Rgefx Af Tsf COMBI control station C-axis with drilling, milling, and engraving cycles Residual material detection and machining – during roughing and contour pockets MULTIFIX C forne setup Three-jaw chuck SMW AUTOBLOK: HI-GRIP HGF260-81-3 Oil emulsion mist filter for work area extraction: MAHLE LTA600 4 driven axial tool holders 2 driven radial tool holders

Condition: good (used), Year of construction: 2000, grinding wheel diameter: 750 mm, grinding width: 180 mm, controller manufacturer: SIEMENS, controller model: 840 D, CONTROLS .. CNC controls SIEMENS 840 D WORKING RANGE (DOUBLE DISC GRINDER) .. Grinding wheel diameter: 750 mm .. grinding width max. - throughfeed grinding: 180 mm .. material thickness max. - throughfeed grindin: 30 mm .. grinding width max. - plunge cut grinding: 300 mm .. material thickness - plunge cut grinding: 80 mm Tjdpsxzy Nfjfx Af Tof GRINDING SPINDLE 1 .. drive power: 48 kW GRINDING SPINDLE 2 .. drive power: 48 kW COMPONENT-FEEDER .. Feeder Design: rotary Feeder .. feeder velocity max.: 20 mm/min .. feeder velocity min.: 240 mm/min DIMENSIONS / WEIGHTS .. space requirements -left/right-: 4900 mm .. space requirements -front/back-: 5000 mm .. total height: 3100 mm .. total weight approx.: 13000 kg with inline measuring system DISKUS IONIC 17A Emulsion treatment system HÜTTNER F6-157, YOM 2006

Condition: used, Year of construction: 2024, controller manufacturer: Heidenhain, controller model: TNC 7, _____ Description: Year of manuf. : 2024 Control : Heidenhain TNC 7 Speed : 16000 rpm Movement X/Y/Z : 2100/2100/1250 mm Tool holder : HSK 100 In General: Year of manufacture:2024 Control:Heidenhain TNC 7 Travel distances X/Y/Z:2,100/2,100/1,250 mm Tool holder:HSK 100 Milling head: Technology:Universal milling head with controlled B-axis Spindle:Motor spindle Speed:16,000 rpm Max. power:52 kW Max. torque:404 Nm Tool holder:HSK 100 Media feed:Blowing air + cooling lubricant NC rotary table: C-axis:360° Clamping surface:1,700 mm Tool magazin: Technology:Wheel magazine Tool changer:Double gripper Number of stations:123 Tsdpfx Aoxzxacof Tof Cone cleaning:Rotating brushes Equipment: Chip removal:Chip conveyor Coolant supply:Internal coolant system, 80 bar Coolant temperature control:Immersion recooler Position measuring systems:Direct in all axes Accuracy package:µ-Precision package Workpiece measurement:Renishaw OMP 600 Tool measurement:BLUM laser Kinematics measurement:3D quickSET Process monitoring:Operating mode 4 Machine protection:MPC (quick shutdown) Digital manufacturing:IOT Connector, MDC, NETservice CAD import:DXF, STEP, and IGES formats Emulsion mist separator:Mechanical Setup mode:Electronic handwheel

Condition: ready for operation (used), Year of construction: 2020, operating hours: 2,850 h, General Data Measurements width 2615 mm Measurements depth 2158 mm Measurements height 2985 mm Machine weight 5000 kg Control Unit Brand SIEMENS Main Drive Number of axis 3 Movement X-Axis Movement 800 mm X-Axis Rapid Traverse 36 m/min Y-Axis Movement 450 mm Tedexzvu Dopfx Af Tef Y-Axis Rapid Traverse 36 m/min Z-Axis Movement 510 mm Z-Axis Rapid Traverse 30 m/min Workpiece Workpiece weight 600 kg Tools Slots in storage 30 Max weight 8 kg Max tool diameter 125 mm/80 mm Max tool length 300 mm Type of tool holder BT 40 Media Chip conveyor Yes Additional Equipment Electronic Handwheel Chip conveyor Oil skimmer Emulsion flushing gun 2 x Hydraulic vice 25 x Clamping chuck BT40 This 3-axis DOOSAN DNM 4500 vertical machining center was manufactured in 2020. It features a SIEMENS 828 D CNC controller, with X-axis travel of 800 mm, Y-axis travel of 450 mm, and Z-axis travel of 510 mm. The spindle operates at 12,000 rpm with a drive power of 16.5 kW. It includes a tool magazine with 30 slots and additional equipment like a chip conveyor and an electronic handwheel. Contact us for more information about this machine. Application Types Milling

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, High-end Laska ME 500 PNV vacuum mixer, 500-liter capacity. Tsdpfxex Adnbs Af Tof Laska is known as one of the best industrial mixer manufacturers worldwide. Machine is in good operating condition and ideal for plant-based, meat, dough, fillings, emulsions, and high-consistency mixes. Technical details: • Capacity: 500 L • Vacuum mixing system • Stainless steel construction • Programmable control • Heavy-duty industrial build This mixer was used in controlled food-tech production and maintained according to manufacturer guidelines. Location: Best, Netherlands

Condition: refurbished (used), functionality: fully functional, The Sepamatic 4000 DPC (Desinewer/Separator) is a powerful, industrial-scale machine designed to efficiently separate soft tissues (meat, poultry, fish) from sinews, gristle, cartilage, and bone fragments. This process yields a high-quality, high-protein mince or emulsion base. Performance & Yield High Yield Separation: Engineered to maximize the recovery of high-quality meat proteins from trimmings, tendons, and less valuable cuts. Low-Pressure Operation: Sepamatic machines typically use a low-pressure desinewing process to gently separate tissues, which minimizes friction and prevents temperature rise, preserving the natural structure, color, and quality of the final product. High Throughput: The "4000" designation suggests a high-capacity machine, ideal for continuous, large-scale industrial operations. Operational Benefits Improved Final Product Quality: By removing sinew and gristle, the 4000 DPC significantly improves the texture and consistency of final products like sausages and restructured meats. Versatility: Capable of processing various raw materials, including beef, pork, poultry, and fish, requiring only a change of screen or configuration. Hygienic Design: Constructed entirely from robust stainless steel (implied by the manufacturer), ensuring durability and simplified washdown procedures that meet stringent food safety requirements. Todpoxxva Iefx Af Tjf Reduced Waste: Converts what would typically be considered low-value trimmings into high-value product, improving overall profitability.

Year of construction: 2009, condition: used, Technical details: tool taper: Ø 54 voltage: 3Ph AC 400V / 50-60 Hz V / Hz compressed air: Anschluß: 6 bar total power requirement: 11 kW Total weight, approx.: 120 kg dimensions L x W x H: 0,7 x 0,65 x 1,7 m Application: for secondary quick tool change through targeted inductive heating. Induction shrink fit unit with water cooling (tank 30 litres, built into the housing) Cooling medium: emulsion for Ø 3 - 50mm HM (carbide) and Ø 6 - 50 HSS tools Tool holder Ø 54mm Concentricity < 0,003mm Todewp I S Hopfx Af Tef ThermoGrip chuck Operation via control panel *