Used Universal Testing Machine for sale (88,912)

Year of construction: 2013, condition: good (used), Universal testing machine Zwick/roll Type: 1488 Modernized in 2013 with software Test force max.: 200 kN Gsdpfxexw N Uvj Ag Djkf Required space: width: 2,000 mm, height: 2,100 mm, depth: 800 mm, weight approx. 1,000 kg.

Condition: used, Zwick tensile testing machine Model: Z20 Controller: BX1-EZ020.A4K-000 Technical Data: Stroke: 200 mm Piston dimensions (H x W x D): 1037 x 385 x 180 mm Fmax: 20 kN Vmax: 125 mm/s Accessories: ClipOn extensometer 13.5 mm Extensometer MFA 25 (temperature range up to +200°C) Computer + Software: testXpert II V3.5 Climate chamber: Airtemp LKG-K-TK-50-040/150 Temperature range: -40°C to +150°C Climate temperature range: 20°C to +90°C Godpfx Agsx A Aa Ae Dokf Humidity range: 10% to 95% Test chamber volume: 50 liters Temperature change rate: 1 K/min Refrigerant: R404, 5 kg Voltage: 400V 3Ph/N/PE/50 Hz 16 A 9 kW Condition: used Total weight: approx. 1500 kg Scope of delivery: (see picture) (Subject to change and errors in technical data and specifications!) For further questions, we are happy to assist you by phone. Written orders possible by email or fax.

Year of construction: 2021, condition: used, machine/vehicle number: 2150801, max. clamping length: approx. 60 cm, with darkening cabin Gkedpfxsx Akkcj Ag Dof

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Universal testing machine PM3 Force: 3 kN cross beam stroke: 520 mm Gsdpefdzupofx Ag Djkf Working area depth: 66 mm total height: 1036 mm Weight: ca.40 Kg Travel resolution: 0.01 mm testing speed: 1-500 mm / min Cc7d2rmq Return speed: 700 mm / min Force transducer: 3 kN incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keyboard, so that a "quick test" can be carried out without a PC. For tests that require data storage and recording of the curve progression, we offer you the possibility of control and evaluation with the basic software. This allows to generate different test sequences and to create a test protocol. Furthermore, you have the possibility to process the raw data in your own programs. Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamps: Pressure plates, bending devices, shearing devices, wedge clamps, shear clamps, peeling clamps, screw clamps, pneumatic clamps and hydraulic clamps.

Year of construction: 2022, operating hours: 10 h, condition: new, Universal testing machine H5TMC mechanical construction: according to DIN EN ISO 7500-1) Gsdpfsiq Hw Uex Ag Dekf 2 backlash-free ball screws, drive via AC servo motor, Fmax = 5 kN, stiffness 10 kN/mm 1 working area up to nominal load: working chamber width: 420 mm (optional extensions: +190mm / +330mm / +620mm) max. test stroke without test tools, adapters and KMZ: 1025 mm (optional extensions: +250mm / +500mm) Optional: conversion to floor model, required additional assembly: substructure table Travel speeds: Test speed 0.001 - 2000 mm/min at full load Return speed 2000 mm/min Force measurement: Measuring range: in the range 0.4 - 100 % of the nominal load class 1 (optionally class 0.5) (+/- 1 % of the displayed value according to DIN EN ISO 7500-1) Resolution of force measurement: +/-180,000 digits at 20ms integration time The machine is delivered with a factory test certificate. If, at the customer's request, a factory or DKD calibration is to be carried out at the installation site, this expense must be invoiced separately. Crosshead travel measurement: Incremental rectangular input with encoder monitoring, storage of crosshead position. Resolution of the crosshead travel measurement:

Year of construction: 1963, condition: not inspected (used), functionality: unexamined, machine/vehicle number: 1762, Universal Testing Machine UHP 60 – Losenhausenwerk Düsseldorf-Grafenberg For sale is a Universal Testing Machine, type UHP 60, manufactured by Losenhausenwerk A.G., Düsseldorf-Grafenberg. This machine was originally produced in the 1960s and is a classic testing device for tensile, compression, bending, and shear tests on metallic and non-metallic materials. Technical Data (according to original documentation): - Max. static test force: 60 t - Max. dynamic test force: 40 t - Test pressure: approx. 235 bar - Stroke height (piston extended): approx. 3865 mm - Total weight: approx. 2500 kg Gsdpfx Aoxvp H Aog Dekf - Foundation pressure: approx. 5400 kg/m² - Grip separation: 0–1000 mm - Working cylinder diameter: 180 mm - Max. piston stroke: 235 mm - Lower grip adjustment speed: up to 750 mm/min - Grip width: 80 mm (max. opening 40 mm) - Compression plate distance: 150–400 mm - Compression plate diameter: 230 mm - Bending support distance: up to 1000 mm General Information - Year of manufacture: 1963 - Serial number: 1762 - Year of acquisition: 1963 - Grip separation: up to 1000 mm - Bending test: support distance 50–1000 mm - Shear test: 15 mm Ø specimens Condition The machine comes from a laboratory inventory, is complete, and was stored in working condition until recently. Due to its age, it is sold as untested and without warranty. Special Features - Robust industrial quality, made in Germany - Includes original documentation, type plates, and machine record - Ideal for collectors, museums, or restoration purposes 💡 Collection preferred (due to weight, approx. 2.5 t).

Year of construction: 2025, condition: as good as new (ex-display), Stand-alone machine, max. testing force 200 kN, most modern WINDOWS software (freely programmable test sequences), over 600 finished test results, Machine price WITHOUT clamping device as the final equipment is based on your requirements: included in the price: - Machine in working order - incl. load cell 200 kN (grade 05 from 2000 - 200,000 / grade 1 from 400 - 2000 N - Warranty 24 months - Software LabTest - meets and exceeds all expectations - without clamping tool - without delivery (distance-dependent) - incl. DAkkS (DKD) calibration Optional: - Mechanical clamping device - Hydraulic clamping tool - Bending tools - Druckplatten plates - Clip-on extensometer - Probe arm extensometer - Video extensometer - Laser speckle extensometer - Climate chambers Gkedpfx Agscyamwo Dsf - High temperature / hot draft furnaces ... just everything that is necessary for mechanical material testing up to the LASER TECH (optical laser speckle strain gauge for non-contact strain measurement of metal, plastic ... Ask also for other sizes. We offer new machines on the quality level of the market leader at prices of used machines.

Condition: used, Zwick Type: Z30 Technical specifications: Overall height 2114 mm, width 748 mm, depth 580 mm Fmax: 30 kN Vmax: 125 mm/s Accessories: Extensometer ClipOn 13.5 mm Extensometer ClipOn 40 mm Gedjx Az Skjpfx Ag Dekf Computer + software testXpert II V3.5 Total weight approx. 500 kg Condition: used Scope of delivery: (see picture) (Subject to modifications and errors in technical data and specifications!) We are happy to answer further questions by phone.

Year of construction: 2025, condition: as good as new (ex-display), Universal testing machine PM3 Force: 3 kN cross beam stroke: 520 mm Working area depth: 66 mm total height: 1036 mm Weight: ca.40 Kg Travel resolution: 0.01 mm testing speed: 1-500 mm / min Gkedpfjd R Dpuex Ag Dsf Return speed: 700 mm / min Force transducer: 3 kN incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keyboard, so that a "quick test" can be carried out without a PC. For tests that require data storage and recording of the curve progression, we offer you the possibility of control and evaluation with the basic software. This allows to generate different test sequences and to create a test protocol. Furthermore, you have the possibility to process the raw data in your own programs. Optional: - Delivery & commissioning -DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamps: Pressure plates, bending devices, shearing devices, wedge clamps, shear clamps, peeling clamps, screw clamps, pneumatic clamps and hydraulic clamps.

Year of construction: 2023, operating hours: 5 h, condition: as good as new (ex-display), functionality: fully functional, Universal testing machine H5TMCI 250mm Extended mechanical structure: 2 backlash-free recirculating ball screws, drive via AC servo motor, Fmax = 5 kN, stiffness 10 kN/mm 1 working area up to nominal load: working chamber width: 420 mm (optional extensions: +190mm / +330mm / +620mm) max. test stroke without test tools, adapters and KMZ: 1025 mm (optional extensions: +250mm / +500mm) Optional: conversion to floor model, required additional assembly: substructure table Travel speeds: Test speed 0.001 - 2000 mm/min at full load Return speed 2000 mm/min Gsdpfx Asmdpafog Dokf Force measurement: Measuring range: in the range 0.4 - 100 % of the nominal load class 1 (optionally class 0.5) (+/- 1 % of the displayed value according to DIN EN ISO 7500-1) Resolution of force measurement: +/-180,000 digits at 20ms integration time The machine is delivered with a factory test certificate. If, at the customer's request, a factory or DKD calibration is to be carried out at the installation site, this expense must be invoiced separately. Crosshead travel measurement: Incremental rectangular input with encoder monitoring, storage of crosshead position. Resolution of the crosshead travel measurement:

Year of construction: 2025, condition: as good as new (ex-display), Max. testing force 50 kN, actual WINDOWS software (free programmable testing procedure) more than 600 ready prepared testing results (demo machine for special price) The machine state is as new. Gkodpfxjptcme Ag Def Price of machine is without clamping heads (shown on the photo) because this equipment will be delivered as option according to your requirements. Price includes: - Machine 100 % functional - incl. load cell 50 kN (quality class 0.5 from 500 - 50000 N) - warranty 24 month - software LabTest - unique performance - without clamping heads (as option) - without costs for delivery (depending on distance) - incl. Setup, training and DAkkS calibration Optional: - clamping heads - bending support - compression plates - extensometer - climatic chamber Even everything for to perform standard test procedures or according to you company requirements up to high performance testing equipment like MICRON LASER SPECKLE (optical Laser Speckle extensometer for non contact measuring of elongation for metal, plastic and other... Please ask for different machines with higher / lower forces, special equipment or applications: We offer new machines with highest quality and best price ratio at fair prices!

Condition: excellent (used), Zwick/Roell Zwick/Roell ProLine Universal Testing Machine Z010 TN – 10 kN Offered here is a Zwick/Roell ProLine Z010 universal testing machine with a maximum test force of 10 kN. The system was manufactured in Germany, is CE-certified, and was built in 2022. It is suitable for all types of material testing, for example tensile, compression, and bending tests in laboratory, industrial, and quality control environments. Technical data of the testing machine: Manufacturer: Zwick/Roell Model / Type: ProLine Z010 (10 kN) Test Force (Fnom): 10 kN Model: Z010 TN ProLine, nominal force: 10 kN Test area (W x H): 440 x 1050 mm Testing speed: 0.001 – 1000 mm/min, continuously up to nominal force High-precision guidance, very low noise generation High-resolution, maintenance-free DC motor Electrical connection adjustable in 6 voltage ranges Certification: CE Reference: 741077 Software & PC: testXpert II basic software in German Intuitive operation, force/elongation control, statistical evaluation, user management Power supply: 230 V, 50/60 Hz, 3.5 A, 1Ph/N/PE Weight: approx. 200 kg Note: The ProLine series is among the most precise and reliable testing machines for professional applications. Important note: “The table shown in the photos is not included in the sale.” Gsdjx Aqxmepfx Ag Dekf Condition: used Scope of delivery: (see photos) Zwick/Roell ProLine Z010 testing machine Test head / compression device PC system with monitor, keyboard, and mouse Various test fixtures and accessories (see photos) (Specifications and technical details subject to change and errors!) If you have further questions, feel free to contact us by phone.

Year of construction: 2025, condition: as good as new (ex-display), Universal testing machine PM10 Force: 10 kN cross beam stroke: 700 mm Installation space: 400 mm total height: 1230 mm Weight: ca.85 Kg Travel resolution: 0.01 mm testing speed: 1-500 mm / min Return speed: 700 mm / min Force transducer: 10kN incl. evaluation electronics and basic software. Gksdjd R Dpmepfx Ag Def Our testing machines can be operated in stand-alone mode via a numeric keyboard, so that a "quick test" can be carried out without a PC. For tests that require data storage and recording of the curve progression, we offer you the possibility of control and evaluation with the basic software. This allows to generate different test sequences and to create a test protocol. Furthermore, you have the possibility to process the raw data in your own programs. Optional: - Delivery & commissioning -DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamps: Pressure plates, bending devices, shearing devices, wedge clamps, shear clamps, peeling clamps, screw clamps, pneumatic clamps and hydraulic clamps.

Year of construction: 2024, condition: new, Universal testing machine H50TMCI / 900 Watt mechanical construction: according to DIN EN ISO 7500-1) 2 backlash-free ball screws, drive via AC servo motor, Fmax = 50 kN, stiffness 65 kN/mm 1 working area up to nominal load: working area width: 510 mm (optional widening: +240mm / +530mm) max. test stroke without test tools, adapter and KMZ: 1095 mm (optional extensions: +250mm / +500mm) Optional: conversion to floor model, required additional assembly: substructure table Travel speeds: Test speed 0.001 - 800 mm/min at full load Return speed 800 mm/min Force measurement: Measuring range: in the range 0.4 - 100 % of the nominal load class 1 (optionally class 0.5) (+/- 1 % of the displayed value according to DIN EN ISO 7500-1) Resolution of force measurement: +/-180,000 digits at 20ms integration time The machine is delivered with a factory test certificate. If, at the customer's request, a factory or DKD calibration is to be carried out at the installation site, this expense must be invoiced separately. Gsdpfx Ajiq Hxcog Dokf Crosshead travel measurement: Incremental rectangular input with encoder monitoring, storage of crosshead position. Resolution of the crosshead travel measurement:

Year of construction: 2025, condition: new, Max. testing force 5 kN, actual WINDOWS software (free programmable testing procedure) more than 600 ready prepared testing results - demo machine for special price Gsdpfx Asdb Nfpog Dskf The machine state is as new. Price of machine is without clamping heads (shown on the photo) because this equipment will be delivered as option according to your requirements. Price includes: - Machine 100 % functional - incl. load cell 5 kN (quality class 0.5 from 50 - 5000 N) - warranty 24 month - software Graphwork 6 (actual) - without clamping heads (as option) - without costs for delivery (depending on distance) - incl. setup, training Optional: - clamping heads - bending support - compression plates - extensometer - climatic chamber Even everything for to perform standard test procedures or according to you company requirements up to high performance testing equipment like MICRON LASER SPECKLE (optical Laser Speckle extensometer for non contact measuring of elongation for metal, plastic and other... Please ask for different machines with higher / lower forces, special equipment or applications: We offer new machines with highest quality and best price ratio at fair prices! Photos shows machine with optional equipment!

Condition: excellent (used), GALDABINI Type: Quasar 50 / Nominal Capacity: 50 kN with PC, monitor, and GraphWork 5 testing software Universal Testing Machine The "QUASAR" universal testing machines are designed as single-room testing machines and essentially consist of the following components: Machine frame. The design and structure of the machine load frame is designed where necessary for the specified maximum loads: Electromechanical load application with toothed belt drive, toothed belt pulleys, drive with DC or brushless servo motor, and recirculating ball screws. Load measuring system with load cell suitable for tension and compression. Electronic control unit that performs all functions: Regulation and control, monitoring, and recording of the output signals of the measuring amplifiers for force, strain, and crosshead travel. The system is based on a 32-bit processor with a clock speed of 25 MHz; The analog signals are acquired by an A/D converter with 20-bit resolution. The electronic control system is usually located in the base of the machine. This also applies to most of the electrical components of the drive and power supply. The operator interface is connected to the PC via an RS232 serial interface with a high transmission speed of 38400 baud. Rigid two-column system with a maximum capacity of 50 kN. Suitable for metals, plastics, composites, and other materials. Stylish design and advanced features. Flexible and modular design for easy future expansion. Key technical advantages include extremely high resolution of load and stroke values, as well as a minimum test speed of 0.0005 mm/min for the highest performance and most accurate results. Technical specifications: Nominal capacity: 50 kN Speed at maximum load: 0.0005÷200 mm/min No-load speed: 500 mm/min Distance between clamps: 1000 mm Total stroke: 1000 mm Crosshead travel resolution: 0.1 µm Positioning repeatability: 2 µm Distance between wedge clamps: 480 mm Clearance between columns: 410 mm Unit of force Newton - daN - kgf - Ibs Dimensions: Gjdpfx Aev Tywqjg Dokf Height: approx. 1548 mm Width: approx. 700 mm Depth: approx. 730 mm Power supply: 220V (+10%) 50 Hz Power consumption: 0.65 kW Weight: approx. 255 kg without accessories Recommended lighting during use: 300 lux Weight: approx. 255 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Year of construction: 2025, condition: new, Universal testing machine PM50 Force: 50 kN cross beam stroke: 1200 mm Installation space: 400 mm Overall height: 1817 mm Weight: ca.380 Kg Travel resolution: 0.01 mm Testing speed: 0.03-1000 mm / min Return speed: 1000 mm / min Gkedpfx Asd R Dp Ejg Dsf Force transducer: 50 kN incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keyboard, so that a "quick test" can be carried out without a PC. For tests that require data storage and recording of the curve progression, we offer you the possibility of control and evaluation with the basic software. This allows to generate different test sequences and to create a test protocol. Furthermore, you have the possibility to process the raw data in your own programs. Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamps: Pressure plates, bending devices, shearing devices, wedge clamps, shear clamps, peeling clamps, screw clamps, pneumatic clamps and hydraulic clamps.

Year of construction: 2024, operating hours: 4 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: H2,5TMNI, Universal testing machine H 2,5 TMNI L Please always send your mail address. mechanical construction: Single spindle universal testing machine with backlash-free ball screw in C-frame design with spindle protection and brushless drive motor, Fmax = 2.5 kN 1 working chamber up to nominal load: Working chamber depth: 105 mm max. test stroke without test tools, adapter and KMZ: 1375 mm max. test area height (between lower fixed and moving crosshead) without test tools, adapter and KMZ: 1375 mm Travel speeds: Test speed 0.005 - 1200 mm/min up to nominal load return speed 1200 mm/min Force measurement: Measuring range depending on the force sensor used 0.4 - 100 % of the nominal load class 1 (optionally class 0.5) according to DIN EN ISO 7500-1 and ASTM E4. Resolution of the force measurement depending on the integration time between: +/-160,000 and +/-900,000 digits. The machine is delivered with a factory test certificate. If, at the customer's request, a factory or DAkkS calibration is to be carried out at the installation site, this expense must be invoiced separately. Crosshead travel measurement: Gkjdpsmdn Trsfx Ag Djf Incremental rectangular input with encoder monitoring, storage of crosshead position. Resolution of the crosshead travel measurement:

Year of construction: 2025, condition: as good as new (ex-display), Max. testing force 10 kN, actual WINDOWS software (free programmable testing procedure) more than 600 ready prepared testing results - demo machine for special price The machine state is as new. Price of machine is without clamping heads (shown on the photo) because this equipment will be delivered as option according to your requirements. Price includes: - Machine 100 % functional - incl. load cell 10 kN (quality class 0.5 from 100 - 10000 N) - warranty 24 month - Software LabTest - unsurpassed flexibility, meets and exceeds your expectations - without clamping heads (as option) - without costs for delivery (depending on distance) - incl. setup, training Optional: - clamping heads - bending support - compression plates - extensometer - climatic chamber Even everything for to perform standard test procedures or according to you company requirements up to high performance testing equipment like MICRON LASER SPECKLE (optical Laser Speckle extensometer for non contact measuring of elongation for metal, plastic and other... Please ask for different machines with higher / lower forces, special equipment or applications: We offer new machines with highest quality and best price ratio at fair prices! Gjdpfxjdb Nf Io Ag Dskf Photos shows machine with optional equipment!

Condition: excellent (used), Zwick/Roell Zwick/Roell 1456 RetroLine Universal Testing Machine 20 kN For sale is a high-quality universal testing machine from the renowned manufacturer ZwickRoell, model 1456 RetroLine, year 2023, with a nominal force of 20 kN. The machine was completely upgraded to state-of-the-art technology as part of the RetroLine modernization and is ready for immediate use. Gjdpfow U N Rtsx Ag Dskf The machine is in very good condition, has been modernized, and complies with all current standards. It is ideally suited for tensile, compression, bending, and shear tests in research, development, and quality assurance. Technical data: Make: ZwickRoell Model: 1456 RetroLine Year of manufacture: 2023 Nominal force: 20 kN Test space dimensions: Height 900 mm, Width 420 mm Drive: Electromechanical spindle drive Speed range: 0.001 – 1000 mm/min (depending on model) Measurement accuracy: ± 1% according to ISO 7500-1, Class 1 (optionally 0.5) Control system: testControl II Software: testXpert III Equipment: Replacement head Cabinet (protective / soundproofing) Evaluation unit included For the ZwickRoell 1456 RetroLine with 20 kN, the approximate values (depending on configuration and equipment, e.g., cabinet, evaluation unit) are as follows: Dimensions Overall height: approx. 1.8 – 2.0 m Width: approx. 600 – 800 mm Depth: approx. 600 – 800 mm Test space (installation height/width): 900 mm × 420 mm Weight: Base machine: approx. 250 – 350 kg With cabinet and evaluation unit: up to approx. 400 – 450 kg Condition: used Scope of delivery: (see picture) - Zwick/Roell 1456 RetroLine testing machine (20 kN) - Protective / soundproofing cabinet - Interface card for force transducer - Operating and technical documentation (PDF & printed) Inspection by arrangement possible. Shipping or collection by arrangement. (Specifications and technical data subject to change and errors excepted!) Further questions can be answered by phone.

Condition: used, functionality: fully functional, Year of construction: 2009, 1 Universal Testing Machine Type H 10 KM Used device with Windows 11 software for tensile, compression, and bending tests; comes with one pair of wedge grips up to 10 kN and a certificate for tensile and compression displacement measurement. For testing in tension, compression, shear, bending, etc. • This is a dual-spindle benchtop model. • The machine complies with DIN 51220 and 51221, Class 1. • Digital display for force and displacement, 4½ digits, with peak value memory. • Five-range automatic switching for force and displacement measurements. • Digital speed adjustment from 0.5 to 1000 mm/min in increments of 0.1 mm. • Break detector and automatic return function are standard features. • Driven by a precision servo motor with high-frequency chopper control unit and digital feedback for load-independent, constant speed. • Quiet operation thanks to toothed belt drive and ball screw spindles with bellows cover. • Fully computer-controllable via RS 232 interface. Godpfx Agoxghlfj Dskf Max. load: 10 kN in tension and compression Max. travel: 1150 mm without grips Force measurement: Strain gauge Measurement principle: Temperature-compensated Displacement measurement: Built-in optical encoder, 0.01 mm resolution Power supply: 220-250 V, 50-60 Hz Power consumption: 1.0 kW Dimensions: Height 1575 mm, Width 635 mm Clear width of frame: 410 mm Weight: approx. 95 kg Includes: 10 kN load cell and certificate for force and displacement.

Year of construction: 2025, condition: as good as new (ex-display), QUASAR 1200 kN tensile testing machine / universal testing machine most modern WINDOWS software (freely programmable test procedures), over 600 finished test results, machine price WITHOUT clamping device - final equipment according to your requirements Included in the price: - Machine in working order - incl. load cell 1200 kN (grade 05 from 1000 - 100,000 / grade 1 from 200 - 1000 N - Warranty 24 months - Software LabTest - unsurpassed flexibility, complete software (!) - without clamping tool - without delivery (distance-dependent) - incl. DAkkS (DKD) calibration Optional: - Mechanical clamping device - Hydraulic clamping tool - Bending tools - comression plates - Clip-on extensometer - Probe arm extensometer - Video extensometer Gkedpsdb Ndcofx Ag Djf - Laser speckle extensometer - Climate chambers - High temperature furnaces ... just everything that is necessary for mechanical material testing up to the LASER TECH (optical laser speckle strain gauge for non-contact strain measurement of metal, plastic ... Ask also for other sizes. We offer new machines on the quality level of the market leader at prices of used machines.

Condition: excellent (used), Haida Type: HD-B604-S Sensor: TECSIS load cell Max. Capacity: 2T / 20 kN Unit: G, kg, N, LB (adjustable) Gedpfxsr Ixq Re Ag Djkf Resolution: 1/250,000 Accuracy: ± 0.5% Max. Stroke: 700 mm (without fixture) Test speed: 0.1-500mm/min (adjustable) Voltage: 220V AC ± 10%, 50/60Hz Clamping jaws: 0-7 mm Weight: approx. 175 kg Dimensions (WxDxH): 88 x 50.5 x 150 cm Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2024, condition: new, machine/vehicle number: H3000-H5000TM, Universal testing machine H3000TM-H5000TM according to DIN EN ISO 7500 The universal testing machine of the H3000TM-H5000TM series is a single-spindle machine, a robust construction made of aluminum and V2a with ball screws, ball bushing guides and toothed belt drive. The bellows cover protects the spindle and guides. The testing machine is microprocessor controlled and has a membrane keypad. The 2-line LCD display shows the force and travel. The testing machine can be used as standalone or with a PC via USB interface. The displacement is measured by means of an encoder 0.01 mm visible resolution on LCD (internal 0.0001mm). The machine is manufactured with a standard load cell: 0.03% linearity and the corresponding calibration. Optionally it is possible to add a second channel for a second load cell or a displacement transducer. The universal testing machine is manufactured with two different travels, 500mm or 1200mm (without load cell and testing tool). Further scope of delivery: One load cell up to nominal load, 220 Volt cable, USB cable, description, CE declaration of conformity. For more information, please refer to the attached description. Load cell 3000N-5000N Measuring range: 5-5000N tension and compression, with nom. 2mV/V output signal, overload protection: +/- 1000%, linearity: +/- 0.05%, hysteresis: +/- 0.03%, repeatability: +/- 0.02%, with, incl. 1.5m connection cable incl. calibration certificate Long travel extensometer HE 900mm measuring travel, measuring arms motorized, including electronics Accuracy class class 1 from 1mm travel according to DIN EN ISO 9513 Measuring principle optical incremental Measuring path 900 mm , minus measuring length Display error 6 µm or 2 Resolution 1 µm Actuating force 10 cN Standard initial device measuring length (Lo) 10-100 mm, in 5 mm steps Lo adjustment is manual Measuring arm opening and closing is motorized specimen diameter 0-30 mm specimen thickness 0-30 mm Gedpfeiq Hxksx Ag Djkf sample width 0-100 mm Weight approx. 32kg Scope of delivery strain gauge complete with electronics Cutting edges round: 1 set each carbide / rubber wear parts measuring blades optional rectangular cutting edges ATTENTION: When using optional cutting edges a readjustment of the lo a readjustment of the lo stop is necessary.

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: H50KS, tractive force with load: 50,000 N, Universal testing machine, type H50kS up to 50KN for tension and compression Load cell 50KN 10KN 1KN and Windows software 8-9-10-or 11 for tension, compression, bending, shear etc., according to EN ISO 7500-1, ASTM E4 The H50kS is a universal testing machine developed according to the latest standards. The machine operates in accordance with the relevant radiation protection and safety directives in the EC. (EN 50081-1, 72/23/EEC, EN 61010-1) The maximum voltage within the machine is 48 volts. Special features - large, easy-to-read liquid crystal display with backlighting - Graphical or numerical display mode - alpha-numeric file input - speed range 0.001 to 500 mm/min. - high return speed 0.001 to 500 mm/min. - exact crosshead positioning - Robust load frame - Output report of results with mean value and standard deviation via printer - Large selection of test software under Windows for various standards - RS232 interface mode for use with computer system - Accuracy of load cell force display 0.5 % over the entire range - Displacement display accuracy 0.001 mm - Equipped with a force and displacement alarm system - 32bit motor controller - 20% digital weight blanking during load cell capacity check - Automatic motor alarm in case of over or under voltage and overheating Specifications: - Force measurement accuracy +/- 0.5 % of the displayed force in the range 2% to 100% - Accuracy of position measurement +/- 0.01 % or 0.001 mm - Speed accuracy +/- 0.005 % of the selected speed - Operating temperature 0 to 38°C - Humidity range 10% to 90% Technical data: - Two-spindle table model - maximum load 50kN in tension and compression Gjdoq Ruw Nepfx Ag Dskf - maximum stroke 1100 mm without clamping fixtures - for further details please refer to the brochure Dimensions: Height: 1613 mm width: 720 mm Depth: 500 mm Weight: 140 kg Connection: Machine: 50-60 Hz - 2000 W Power supply: 220/240VAC