Used Portal Measurement Machine for sale (95,131)

Year of construction: 2020, condition: ready for operation (used), A CNC 3-axis portal milling machine Stepcraft is available. Travel path X/Y/Z: 2440mm/1220mm/140mm, machine dimensions X/Y/Z: approx. 2650mm/1600mm/900mm, weight: approx. 300kg. Includes various holders and a handheld control unit. Documentation available. An on-site inspection is possible. Itodpfx Aew Ni I Uofisn

Condition: used, Year of construction: 1987, functionality: fully functional, Angle milling head Iedorfw R Hepfx Afijtn - Manufacturer: Waldrich Siegen - Model: ET500 - Order no.: 11290/731

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, operating hours of spindle: 4,486 h, Initial commissioning: 2002 Control system: Fidia C20 with HPX operator panel Machine hours: 146,161 h X-axis: approx. 3,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,500 mm Iodpfow Au H Rox Afietn A-axis: ± 105° C-axis: ± 300° Clamping table Clamping surface: approx. 5,000 x 2,000 x 400 mm T-slot spacing: 18H12 / 250 mm Table load capacity: 15,000 kg/m² 2-axis milling head AC3 (2003) Spindle power: 28 kW Spindle speed: max. 18,000 rpm Torque: 90 Nm Tool holder: HSK 63A Tool clamping: hydraulic Minimum quantity lubrication: external Linear axis drives Feed rate X, Y-axis: up to 20 m/min Feed rate Z-axis: up to 20 m/min Axis acceleration X, Y, Z-axis: up to 1.5 m/s² Electrical connections Connected load: 40 kW Main fuse: approx. 80 A Dimensions, weights Space requirement machine including peripherals: approx. 7,300 x 5,600 x 5,600 mm Total weight: approx. 16,500 kg Colour Enclosure, gantry, control cabinet: light grey Milling head and applications: turquoise Additional equipment - 18-position chain-type tool changer - 3-sided enclosure, without extraction ducts Condition of the machine Fully operational, very good condition. Dismantled, stored and immediately available.

Condition: new, Year of construction: 2023, travel distance X-axis: 6,000 mm, travel distance Y-axis: 4,000 mm, travel distance Z-axis: 1,500 mm, (distance between machine columns 3,520 mm) Z= 1,500 mm Ijdeqrq Emjpfx Afijtn Heidenhain control Water-cooled inline motor 43 kW / 900 Nm Automatically indexing milling head 6,000 min-1 / 2 planes, 90°|45° / 0.001° x 0.001° 3-sided protective housing Cable handwheel 2 x chip conveyor 60 tool changer

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, A used CNC portal milling machine with a C-axis for turning (CNC turning, CNC milling and angle head machining). Boring machine machining! Hirth gearing! TRAVEL PATHS X: 3,000 mm Y: 3,000 mm Z: 1,000 mm Table diameter: 2,500 mm Max. turning diameter: 3,000 mm Max: turning height: 1,000 mm Machine: Uniport 6000 Boring machine work, also CNC turning, CNC milling and angle head machining. All in one clamping, combined with the speed and precision of a CNC portal milling machine. TRAVEL PATHS X: 3,000 mm Y: 3,000 mm Z: 1,000 mm Dimensions Table diameter: 2,500 mm & 2,000 mm Itjdovvh R Djpfx Afion Max. turning diameter: 3,000 mm & 2,500 mm Max: turning height: 1,000 mm C-axis for turning New price: €1.8 million Dismantling: by arrangement The machine comes with a protective cover so that no chips get into the Hirth gearing on the slide during milling. Then there is the turning attachment head for the turning tools and an angle head for lateral machining on the plate field or on the rotary table. You can swivel this over the Hirth gearing by 2.5° each. All holders (milling, turning, angle head) are clamped using HSK-100. The machine comes with a radio probe from M&H (Hexagon) for measuring and zero point probing.   The machine is in operation and can be inspected on site. A video of the machine is available.

Condition: new, Portal machine - the space miracle! CNC portal milling machine for large traverse paths with small space requirements! ADVANTAGES: -optimized space utilization, completely free table clamping area -best possible chip protection due to overhead axes -particularly suitable for high and bulky components -PILZ safety technology -Windows 10 APPLICATIONS: -chipping -measuring and testing -dosing applications FOR MACHINING: -Aluminum / light metals -Milled plastics -Ceramics -Non-ferrous metals (brass, bronze, etc...) -Plastics -Wood Maximum functionality with minimum space requirements is the motto of the OverHead Gantry M. The basic machine can be optimally configured for many sectors and work areas using a variety of variable equipment features and additional options. The possible applications of the OverHead Gantry M include measuring, testing and metering applications in addition to machining. The power of the milling motor of up to 2.2 kW and 20,000 rpm and a traverse speed up to 250 mm/sec make it suitable for processing wood and plastic as well as light and non-ferrous metals. The free processing area and its excellent price/performance ratio off er decisive benefits compared to similar products. The OverHead® Gantry M is available in five different sizes for different process areas from M20 to M50. Do you require the control cabinet on the right-hand side or would you prefer the control panel to be on the left? No problem – we will be happy to accommodate your requirements. And of course we will take care of maintenance and support for your OverHead® Gantry M. Our service technicians can be reached by telephone and can attend to you quickly on-site as needed. In addition, we also off er our in-house isy-CAM 2.8 software and can advise you on your specific application. Isdpfxohqhlvo Afijtn BENEFITS: -Optimal use of space -Free machining area -Fixed table, mobil portal -Variable clearance of 340- 590 mm -Also suitable for a large chip volumes SET UP: Portal: mobil, Table: Fixed

Condition: ready for operation (used), Travel X/Y/Z: 10500mm/3500mm/2800mm, clearance width: 3515mm, max. clearance height: 2500mm, table dimensions X/Y: 13000mm/3000mm, speed: 700rpm, drive power (renewed in 2025): 110kW. Machine dimensions X/Y: approx. 28300mm/10200mm, control: Mitsubishi E300 1.1x, software update: planned for 2025. Includes belt grinding unit, chip conveyor, chip extraction, various cutter heads, tool holders, disc cutters and face milling heads, support blocks, clamping brackets, and currently dismantled counterweights. Documentation available. An on-site inspection is possible. Isdpfx Afew Exttjiotn

Condition: refurbished (used), PORTAL PLANNING MACHINE TOS Isdpfsfmn Txsx Afiotn LENGTH 3000mm

Condition: excellent (used), Year of construction: 2014, First commissioning: 2014 Control: Heidenhain iTNC 530 HSCI including HR 520 handwheel Machine hours Power-on hours: approx. 90,000 h Spindle hours: approx. 38,000 h Current milling spindle hours: approx. 900 h Travel distances X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 2,500 x 3,250 x 600 mm 2-axis milling head VH30 Isdpfx Ajwywciofietn Spindle power: 60 kW Spindle speed: max. 22,000 rpm Torque: 95 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Linear axis drives Feed speed X/Y/Z-axis: up to 60 m/min Axis acceleration X/Y/Z-axis: up to 5 m/s² Electrical specifications Connected load: 190 kVA Main fuse: approx. 315 A Dimensions, weights Space requirement (machine with peripherals): approx. 10,000 x 8,000 x 5,650 mm Total weight: approx. 63,000 kg Colour Enclosure, portal, control cabinet: RAL 7035 light grey Milling head and applications: RAL 6038 luminous green Description: Additional equipment - Coolant supply with belt filter system - 50-position chain-type tool changer - Work area enclosure - Chip conveyor - Emulsion mist extraction system from LTA Optional at extra cost: - Renishaw RMP60 wireless measuring probe - BLUM Control NT Condition of the machine Fully functional, in excellent condition and available for inspection under power! Images are sample photos from a new machine of this type. Original images to follow shortly!

Condition: like new (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,400 mm, table length: 2,800 mm, table width: 3,100 mm, spindle speed (max.): 20,000 rpm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, workpiece weight (max.): 52,000 kg, spindle nose: HSK 63A, controller manufacturer: Heidenhain, controller model: 640, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 5-Axis Gantry Milling Machine PARPAS Model DIAMOND LINEAR 30 Numerical control Heidenhain 640 Cross travel (X): 2,600 mm Longitudinal travel (Y): 3,000 mm Vertical travel (Z): 1,400 mm Feed rates: 60,000 mm/min Continuous orthogonal head (TOE29T) C axis: +/- 370° A axis: +/- 110° Tool holder: HSK-63A Spindle speed: 20,000 rpm Spindle power: 37 kW Table: 3,100 x 2,800 mm Load capacity: 6 t/m² Tool magazine: 60 positions Equipped with: Isdpfx Afswzv Umjiotn - 2 chip conveyors - HR550FS handwheel USED MACHINE YEAR 2021

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, A used CNC portal milling machine with carousel turning unit / C-axis for turning Hirth gearing TRAVEL PATHS X: 3,000 mm Y: 2,500 mm Z: 1,000 mm Table diameter: 2,000 mm Max. turning diameter: 2,500 mm Max. turning height: 1,000 mm Machine: Uniport 6000 Boring work, also CNC turning, CNC milling and angle head machining. All in one clamping, combined with the speed and precision of a CNC portal milling machine. Isdpfx Afjvvh T Seistn C-axis for turning New price: €1.8 million Dismantling: by arrangement The machine comes with a protective cover so that no chips get into the Hirth gearing on the slide during milling. Then the rotary attachment head for the turning tools and an angle head for lateral machining on the plate field or on the rotary table. You can swivel this by 2.5° each time over the Hirth gearing. All holders (milling, turning, angle head) are clamped via HSK-100. A radio measuring probe from M&H (Hexagon) for measuring and probing the zero point is included with the machine. The machine is in operation and can be viewed on site. A video of the machine is available.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 22,000 rpm, Original purchase price of the machine: approx. €1,200,000 TECHNICAL SPECIFICATIONS Control system: CNC Fidia C20/6H-SB X-axis travel: 5,000 mm Y-axis travel: 2,500 mm Z-axis travel: 1,500 mm Ijdpfxewzkz Ie Afiotn A-axis: ±110° C-axis: 360° (±182.5°) Spindle speed: 22,000 rpm Tool holder: HSK A63 Tool changer: 6-position (pick-up) Milling spindle power: 30 kW Rapid traverse X/Y/Z: 20 m/min A/C-axis torque: 500 Nm A/C-axis speed: 20 rpm MACHINE DETAILS Total power: 90 kW Weight: 65 t EQUIPMENT - Control with HPX 20 hand-held unit - Coolant-lubricant system - Centralized lubrication for X, Y and Z axes - Hydraulic power unit HC22DT / 2.61-C5 - Enclosure and monitored loading doors - 14 used tool holders

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 47040940, measuring range X-axis: 3,500 mm, measuring range Y-axis: 6,000 mm, measuring range Z-axis: 2,000 mm, type of input current: three-phase, Equipment: documentation/manual, lighting, type plate available, Portal measuring machine Manufacturer: Mora Type: U204-20-35-60 Measuring software: Manufacturer Gemodek, type MS10 Ijdpowyag Rofx Afijtn Mobile control panel Measuring and evaluation unit 2 PCs, manufacturer HP, type XW4300/Z220 2 monitors, 19/24" Roller shutter cabinet, telescopic drawer cabinet, Manufacturer Lista, width 1,000 mm, 7 drawers Contents: Infrared measuring probe manufacturer Renishaw type PH10M, calibration mandrel, accessories

Condition: used, Year of construction: 1988, functionality: fully functional, travel distance X-axis: 7,500 mm, travel distance Y-axis: 3,100 mm, travel distance Z-axis: 1,000 mm, table width: 2,000 mm, table length: 7,000 mm, overall weight: 180,000 kg, year of last overhaul: 2016, Table 7020x1810 mm Note portal width 2250 mm Travel paths: X=7387 mm Y=3070 mm Z=Support up to max without tool 920 mm + W 1000 Control: Heidenhain ITNC 530 Simultaneous: In X,Y,Z yes. In A,B,C with 1° Hirth gearing Itedowx Nltspfx Afijn Spindle type: SK50 / Gearbox spindle Four attachment heads Internal spindle cooling: Yes Operating hours: 95475 h Spindle hours: 37984 h Modernization carried out: 2003 / Control and drives renewed

Condition: new, Year of construction: 2024, operating hours: 50 h, machine/vehicle number: 305, Available: February 2023 Control: Osai X-axis: approx. 3,100 mm Y-axis: approx. 2,100 mm Z-axis: approx. 1,000 mm Itsdpfx Ajwwq Hcefien A-axis: ± 115° C-axis: ± 360° Clamping table Clamping surface: approx. 3,100 x 2,100 x 213 mm Aluminum with T-slots across every 250 mm Max load: 1000kg distributed over the entire surface 2-axis milling head ST7 Spindle power: 10 kW Spindle speed: max. 24,000 min-1 Torque: 15.3 Nm Tool holder: HSK 63F Tool clamping: pneumatic Blowing air / MMS: outside Drives linear axes Feed speed X and Y axes: up to 50 m/min Z-axis feed rate: up to 30 m/min Color Housing, portal, control cabinet: light gray Z-slider and milling head: orange Additional equipment - 15-way tool changer - Control in a separate, rollable desk

Condition: excellent (used), Year of construction: 2016, travel distance X-axis: 2,400 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 810 mm, CNC HEIDENHAIN iTNC 530 X/Y/Z 2,400/1,500/810 mm retrofitted 4th axis Ijdpfxeq Rcu Ee Afiotn 12,000 min-1, 40 kVA, , traverse paths weight 7.800 kg Table with vacuum plate with BORNEMANN 960 suction unit

Condition: excellent (used), Year of construction: 2019, operating hours: 3,551 h, functionality: fully functional, machine/vehicle number: 0345, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,600 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 4,500 rpm, number of slots in tool magazine: 60, Machine powered at least until June 5, 2025 No reserve price - guaranteed sale at the highest bidder! TECHNICAL DETAILS X-axis travel: 3,200 mm Y-axis travel: 2,600 mm Z-axis travel: 1,000 mm Distance spindle nose to table: 150 – 1,150 mm Distance table to gantry: 2,800 mm Control: HEIDENHAIN iTNC 640 Iedewm E S Sopfx Afietn Table Table dimensions: 3,000 x 2,400 mm T-slots: 28 x 13 x 180 mm Table load: 11,000 kg Spindle and feed rate Max. spindle speed: 4,500 rpm Tool holder: BT 50 Feed rate X/Y axes: 15 m/min Feed rate Z-axis: 12 m/min Rapid traverse X-axis: 7 m/min Rapid traverse Y-axis: 7 m/min Z-axis rapid traverse: 7 m/min Positioning accuracy: ±0.005 mm over 300 mm MACHINE DETAILS Operating voltage: 380 V Frequency: 60 Hz Connected load: 65 kVA Total length: 9,000 mm Total width: 8,000 mm Total height: 5,500 mm Power-on time: 11,498 h Program run: 5,585 h Spindle hours: 3,551 h Axis travel time: 3,945 h EQUIPMENT - 60-station tool changer including BT 50 tool holders - 4th axis from DETRON - Coolant system - Chip conveyor - HEIDENHAIN iTNC 640 control

Condition: good (used), Year of construction: 2000, Maka MM 7 T / 5 axes, year of manufacture 2000, Siemens 840 D control, X/Y/Z travel 2x1500/2000/600 mm, portal milling machine for light machining, milling spindle 7.5 kW, NC milling head, A axis 540°, B axis +/- 100°, 10-position tool changer, HSK F 63 holder, max. saw blade diameter 170 mm, spindle speed up to 24,000 rpm, X/Y axis rack and pinion, Z axis ball screw, vacuum table, aluminium flat table. Iedjwuy Ahjpfx Afistn

Condition: good (used), Year of construction: 2017, operating hours: 9,380 h, functionality: fully functional, machine/vehicle number: 4455, Numerically controlled machining center max. panel sizes: 4,000 x 2,300 mm 1 Kuka KR420R3300 robot 1 Kuka KR200L140 robot 1 Kuka KRL140-3Comp robot Iodpfer E D Eajx Afiotn Conveyor belt for removing the scrap metal Suction Ruwac Zone 22

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 24,000 mm, travel distance Y-axis: 4,720 mm, travel distance Z-axis: 1,500 mm, table length: 24,000 mm, table width: 3,700 mm, rotational speed (max.): 3,000 rpm, CNC Gantry type milling machine make PIETRO CARNAGHI model UNIMILL 37A with CNC Control SIEMENS 840D. Nr. 2 automatic chaning heads: Qt.y 1 vertical head direct Qt.y 1 bi-rotative head with A/C axes indexded at 2.5 degrees Spindle ISO-50 with max 3.000 RPM Ijdpjwtr Srefx Afietn ATC automatic horizontal and vertical positioning with 120 positions

Condition: excellent (used), Year of construction: 2018, operating hours: 1,142 h, functionality: fully functional, machine/vehicle number: 18234, travel distance X-axis: 4,050 mm, travel distance Y-axis: 2,020 mm, travel distance Z-axis: 400 mm, rotational speed (max.): 28,000 rpm, number of slots in tool magazine: 12, The machine has only processed aluminum and plastic. TECHNICAL DETAILS Travel X: 4,050 mm Travel Y: 2,020 mm Travel Z: 400 mm Table Table size: 4,000 × 2,000 mm Clamping surface: industrial T-slot aluminum profile Max. material width: 2,200 mm Table covering: replaceable PVC protective covering Side channel blower: 2 × 7.5 kW, 520 m³/h Vacuum: 420 mbar at 145 m³/h Gantry & Clearance Gantry clearance height: 375 mm Construction: welded, stress-relieved steel structure Speeds Rapid traverse & feed rate: 417 mm/s Accuracy Repeatability: ± 0.025 mm Mechanical resolution: 0.006 mm Guides & Drives Axis transmission: precision ball screw drives (X 2 × Ø 32 mm) Axis drives: 750 W servomotors on X1, X2, Y, Z Dual drive: X-axis Spindle Model: HSD ES 929 Power: 7.5 kW Speed range: 2,000 – 28,000 rpm Max. torque: 5.6 Nm at 12,000 rpm Tool holder: ISO 30, clamping diameter up to 20 mm Cooling: air/convection (motor ribs) Tool changer Number of positions: 12 Max. tool length: 80 mm Length measurement: automatic Control & Operation CNC: Mecanumeric CN 7000 (ISO G-code) Control panel: 15″ touch screen Cooling & Extraction Systems Tool cooling: regulated spray mist Oil mist extraction: integrated Chip/dust extraction: spindle extraction device MACHINE DETAILS Machine dimensions (L × W × H): 5,750 × 2,500 × 2,090 mm Machine weight: 5,000 kg Machine on time: 5,185 h Spindle hours: 1,142 h Power supply: 400 V AC, 50 Hz EQUIPMENT - Heavy-duty flatbed gantry with vacuum-ready aluminum profile table - Two side channel blowers, each 7.5 kW, for powerful vacuum - Swiveling laser pointer for workpiece positioning detection Ijdpfjwtcvuex Afistn - Automatic tool changer with 12 ISO 30 tool holders and measuring station - Spray mist tool cooling for temperature-sensitive materials - Chip and dust extraction directly at the spindle - Pneumatically retractable positioning pins for quick setup - Safety bumpers and emergency stop buffers for operator protection - High-performance industrial vacuum ASPG 40-100 L for table cleaning - EnRoute BASIC v6 software including thread milling module - CE conformity according to directives 89/336/EEC, 98/37/EC, 73/23/EEC

Condition: used, Year of construction: 1997, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, For sale is a portal machining center of the brand Deckel Mori and type 70 V The machining center is ready for immediate use and fully functional Technical data Year of construction: 1997 Control: Grundig Dialog 112 Travel X: 700 mm Travel Y: 550 mm Travel Z: 500 mm table: 900*550 mm max. load: 800 kg Feed speed x, y , z: 10 m/min rapid traverse x, y: 30 m/min rapid traverse Z: 20 m/min Spindle clamping: Hydraulic Mounting: SK 40 Max. speed: 15,000 1/min Tool magazine: 30 pcs max. tool Ø: 80 mm max. tool length: 300 mm max. tool weight: 12 kg Tool changer: Vertical double gripper Tool measurement: Blum 3D probe: Renishaw OMP 60 Coolant system: IKZ Knoll RF 200/1100 F60-1 Space requirement: 3530*3300 mm Transport dimensions: 2.4*3.8*3 m (machine only) Weight: approx. 7,000 kg On request, transportation and loading can be organized for an extra charge. can be organized throughout Europe. Itjdpov T U T Tsfx Afisn Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, Year of construction: 2008, Technical details: bore capacity in steel (diameter): 100 mm max. pitch circle: 7000 mm number of spindles: 2 bore spindle turning speed range: 1 - 3000 U/min high speed spindle taper ISO: 50 bore slide stroke: 900 mm feed speeds: 1 - 6000 mm/min max. workpiece weight: 18000 kg total power requirement: 125 kW Itedpsvb Drhefx Afisn dimensions of the machine ca.: 13 x 11 x 5,1 m with CNC SIEMENS 840 D Workpiece clamping up to dia. 7000 mm The machine is equipped with 2 drilling spindle supports and through spindle coolant (50 bar)both supports can drill simultaneously. Spindle taper SK 50, 2 stages 1 -600 rpm 1650 Nm and 1 - 3000 rpm. 300 Nm Chip conveyor and coolant device *

Condition: like new (used), Year of construction: 2020, operating hours: 12,000 h, functionality: fully functional, machine/vehicle number: 5645, travel distance X-axis: 6,000 mm, travel distance Y-axis: 4,000 mm, travel distance Z-axis: 1,600 mm, feed rate X-axis: 25,000 m/min, feed rate Y-axis: 25,000 m/min, feed rate Z-axis: 25,000 m/min, total length: 6,550 mm, table length: 2,500 mm, table width: 2,500 mm, total width: 15,900 mm, spindle speed (max.): 4,000 rpm, total height: 11,500 mm, overall weight: 57,000 kg, working range: 2,500 mm, grinding spindle motor power: 46,000 W, Ladies and Gentlemen, Iodpfx Aottri Tefiotn Enclosed we advertise our portal bed milling machine. Installation winter 2019/2020. 12,000 operating hours. Price on request. The machine is currently still in operation. The price is for the machine only. Dismantling, transportation and installation are the responsibility of the buyer. We are looking forward to serious inquiries. Many thanks in advance.

Condition: excellent (used), Year of construction: 2013, First commissioned: 2013 Control: Heidenhain iTNC 530 including HR 520 handwheel Machine hours Machine under power: approx. 40,700 h Spindle hours: approx. 17,100 h Spindle hours of current milling spindle: approx. 150 h X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Working table Clamping area: approx. 2,500 x 3,250 x 400 mm 2-axis milling head VH30 Spindle power: 60 kW Spindle speed: max. 22,000 rpm Torque: 95 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Linear axis drives X/Y/Z axis feed rate: up to 60 m/min X/Y/Z axis acceleration: up to 5 m/s² The machine is currently set to the following default values because there was insufficient power available on site! X/Y axis feed rate: up to 40 m/min Z axis feed rate: up to 30 m/min X/Y/Z axis acceleration: up to 2.5 m/s² Connection data Connected load: 190 kVa Back-up fuse: approx. 315 A The machine can be reset to its original values at any time if sufficient power is available. Iedpewa T Hkjfx Afijtn The following reduced connection values apply: Connected load: 130 kVA Back-up fuse: approx. 250 A Dimensions, weight Space requirement (machine with peripherals): approx. 10,000 x 8,000 x 5,650 mm Total weight: approx. 63,000 kg Color Enclosure, gantry, control cabinet: RAL 7035 light gray Milling head and applications: RAL 6038 fluorescent green Description: Additional equipment - Coolant supply with belt filter system - 50-station chain tool changer - Work area cover - Chip conveyor - Emulsion mist extraction system from LTA Optional for an additional charge: - Renishaw RMP60 wireless touch probe - BLUM Control NT Condition of the machine Fully functional, in very good condition. Already disassembled and stored.