Used Portal Drill for sale (6,001)

Year of construction: 2002, condition: used, functionality: fully functional, Machine for cutting aluminium and copper pipes with the option for pipe end processing. Psdpfsyt Sppsx Ahvegi

Year of construction: 2002, condition: used, functionality: fully functional, Machine for straight cutting of aluminium and copper tubes. Pgedpfxjyt Spco Ahvji

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 06651, travel distance X-axis: 6,800 mm, travel distance Y-axis: 3,700 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 15,000 mm, total width: 7,500 mm, spindle speed (max.): 4,000 rpm, total height: 7,000 mm, table height: 1,100 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 3,300 mm, type of input current: three-phase, table load: 50,000 kg, rotational speed (max.): 4,000 rpm, distance table center to spindle nose: 2,110 mm, overall weight: 110,000 kg, spindle motor power: 50,000 W, control cabinet length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, Equipment: rotational speed infinitely variable, MODEL: Portal Type AGE: 1992 S/N #: 06651 CATEGORY: Mills, Planer Type, CNC CAPACITY: X-Axis Travel: 6800 mm Y-Axis Head Travel: 3700 mm Z-Axis Ram Stroke: 1500 mm, fixed crossrail Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 3300 mm Distance Table To Ram Face: 2110 mm, vertical passage 2000 mm Table Size: 6000 x 2500 mm Spindle (Quill) Diameter: 250 mm Spindle Taper: ISO #50 Spindle Speeds: 0-4000 RPM Spindle Motor: 50 KW EQUIPPED WITH: Pedpfsyahv Sox Ahvegi FIDIA System C20 CNC Control, new in 2002 CNC biaxial continous milling head Universal Milling Head with Auto Indexing Right Angle Head with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors both side Way Covers Rapid movements: Z-10.000 mm/min, X and Y-15.000 mm/min Table load: max 50.000 kg Weight of the machine: 110.000 kg Outside dimensions: 15.000 x 7.500 x 7050 mm Machine has been tested before dismantling and is fully operational, all mechanical components in excellent condition, electrics new in 2018. Machine available from stock. The price is now SPECIAL FROM STOCK. Once we will reassemble the machine, price will grow significantly. We can assist you to assemble and run up the machine.

Condition: refurbished (used), PORTAL STRAIGHTENING PRESS PRESSURE 450t WORKING AREA Pgjdpfofcnu Iox Ahvji LONG: 5200mm WIDTH: 2300mm HEIGHT: 1000mm

Condition: not inspected (used), Year of construction: 1986, functionality: unexamined, machine/vehicle number: 7393, travel distance X-axis: 500 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 400 mm, rotational speed (max.): 4,000 rpm, controller model: Siemens 810, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 500 mm Travel Y-axis: 360 mm Travel Z-axis: 400 mm Spindle speed range: 20 – 4,000 rpm Table size: 800 x 390 mm Feed rate range: 1 – 2,000 mm/min Rapid traverse: 5 m/min Number of T-slots: 6 T-slot width: 14 mm T-slot spacing: 63 mm Tool holder: SK 40 Number of gear steps: 4 MACHINE DETAILS Control system: Siemens 810 Total power requirement: 9 kW Dimensions & Weight Space requirements (L x W x H): approx. 2,500 x 2,900 x 1,900 mm Podpfjyv A A Hjx Ahvsgi Machine weight: approx. 2,000 kg

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rotational speed (max.): 4,500 rpm, controller model: Heidenhain TNC 310, TECHNICAL DETAILS X-axis travel: 500 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Tool holder: SK 40 Pgedsywgtxjpfx Ahvoi Spindle speeds: 20-4500 rpm MACHINE DETAILS Control: Heidenhain TNC 310 Dimensions & Weight Space requirements: approx. 2.15 x 2.00 x 2.50 m Machine weight: approx. 3 t EQUIPMENT Swivelling rotary table Documentation

Condition: used, machine/vehicle number: 004922, Max. panel width: 250 mm Max. panel length: 1500 mm No of Top Units: 2 Psdpfx Asg E Th Sjhvogi Lateral horizontal groups: yes

Condition: good (used), Machine is in good working condition. Podpfx Asylxg Eohvogi Parts shown by hand not come.

Condition: used, machine/vehicle number: 007665, Position 1: Automatic Drilling Machine WEEKE-BST 503 + BST 507 Pgodpswuz Dgefx Ahvoi Position 2: Automatic Drilling Machine WEEKE-BST 503 + BST 507

Condition: new, Year of construction: 2025, Heavy, solid cast iron design High running smoothness due to ground gear wheels running in an oil bath Right/left hand rotation Automatic quill feed with manual fine feed Motorized positioning of the Z-axis Motorized table feed of the X-axis Coolant device Machine lamp Gear head can be swivelled ± 60 Adjustable wedge bars Solid dovetail guide of the column, hand-scraped, for highest stability and greatest possible precision Height-adjustable, large-dimensioned protective disk with microswitch Drilling depth stop Digital position indicator DRO 5 Drilling / tapping function Massive and large dimensioned cross table, precisely surface machined with T-slots and adjustable taper bars Solid cast iron machine base with chip channel Single-stage quality industrial electric motor Wide speed range from 60 - 2,760 min-1 due to 2 infinitely variable speeds Dimensions and weights Length approx. 1600 mm Width/depth approx. 930 mm Height approx. 2110 mm weight approx. 495 kg Drilling/milling capacity cutter head size max. 63 mm shank cutter size max. 26 mm Drilling capacity steel (S235JR) 24 mm Continuous drilling capacity steel (S235JR) 20 mm Electrical data Supply voltage 230 V Mains frequency 50 Hz Electrical connection Total connected load 1.5 kW Horizontal milling table length 800 mm width 240 mm Distance vertical spindle - milling table max. 420 mm T-slots size 14 mm T-slots number 3 T-slots distance 80 mm Standards and approvals Standard DIN EN 55011 EMC class C2 Travel Pgodpfx Aeg U Uv Uehvsi X-A

Condition: good (used), ERLO SG- 18 tapping drill CEE Table with casters Pjdpfx Aetrdimjhvegi Instruction booklet

Condition: excellent (used), Make IBARMIA Model S-25/32 Type : BATTERY OF 2 DRILLS Rebuilt machine 1000mm table and 900mm vertical stroke Suitable to R.D. 1215/97 Certificate of the equipment by OCA Authorized Control Body. Instruction book Pgodpfx Ahsvi R D Tsvji

Condition: used, NZX 1500/800SY is a CNC Turning-Milling-Drilling Center with high precision, accuracy and reliability. Capacities: 2 turning spindles, 2 revolvers, swing diameter over bed 800 mm, max. turning Ø 320 mm, max. bar Ø 52 mm; travels Z 810 mm, X 210 mm, Y 110 mm (both carriages). Specs: spindle speeds 0–6000 t/min, spindle power 22/18.5 kW, driven tools power 7.5/5.5 kW, spindle nose JIS A2-5, spindle hole 61 mm; rapid traverse X 30 m/min, Z 50 m/min, Y 20 m/min; weight ~8100 kg; overall dims L4396×W2835×H2320 mm. Accessories: direct measuring system X axis, lamp, coolant system, coolant through counter spindle, loader interface, parts catcher, workpiece conveyor, chip conveyor. Delivers tight tolerances; typical applications: automotive, aerospace, medical, watchmaking and machine tools. Podjyxn I Hjpfx Ahvegi

Condition: excellent (used), MAZAK INTEGREX 400-3S is a CNC Turning-Milling-Drilling Center designed for precision, high accuracy and reliability. Capacities: distance between centres 1500 mm, swing 760 mm, max turning length 1524 mm, bar passage 102/77 mm, tool magazine 40 stations (Ø max 90 mm, L 400 mm). Main specs: main spindle A2-8 stepless 35–3300 t/min 30 kW 1200 Nm; back spindle A2-8 35–4000 t/min 26/22 kW 500 Nm; milling spindle CAPTO C6 15–12000 t/min 18.5 kW 120 Nm. Travels X630 Y±115 Z1585 mm; feeds 0–8000 mm/min; rapid X/Z 38 m/min Y26 m/min; weight ~13300 kg; footprint 5110x2196 mm; height 2798 mm. Equipment: coolant 444 l (15 bar through milling spindle), Forkhardt 3-jaw chucks Ø400/315 mm, linear scale for X, RS232, PCMCIA, spindle sync, chip conveyor, synchronized tapping, foot pedal. Enables tight tolerances; typical applications: automotive, aerospace, medical, machine tools, watchmaking. Pgsdpfjyxn H Njx Ahvoi

Condition: good (used), Year of construction: 1975, machine/vehicle number: 2580, functionality: fully functional, spindle mount: MK 4, For sale is an Alzmetall AB 35 pillar drill from 1975. The drill is in good condition and immediately ready for use. Technical Data: • Machine type: Pillar drill • Manufacturer: Alzmetall • Model: AB 35 • Year of manufacture: 1975 • Machine number: 2580 Pedpfx Aheyxm Ryevjgi • Technical specifications (typical for AB 35, year 1975): - Drilling capacity (steel): 35 mm - Tapping capacity (steel): M 30 - Column diameter: 120 mm - Throat depth: 293 mm - Table size: 500 x 400 mm - Spindle taper: MK 4 - Speed range: 75 – 2,800 rpm - Motor power: 1.5 / 2.2 kW - Weight: approx. 520 kg - Dimensions (L x W x H): approx. 700 x 1,100 x 2,250 mm Transport and loading can be organized across Europe on request, subject to additional cost. All prices are subject to VAT. Inspection possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase & sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality, yet affordable metalworking machine for your production? Or would you like to sell yours?

Condition: new, Year of construction: 2025, travel distance X-axis: 6,000 mm, travel distance Y-axis: 4,000 mm, travel distance Z-axis: 1,500 mm, (distance between machine columns 3,520 mm) Z= 1,500 mm Heidenhain control Psdpfx Asqrq Emohvegi Water-cooled inline motor 43 kW / 900 Nm Automatically indexing milling head 6,000 min-1 / 2 planes, 90°|45° / 0.001° x 0.001° 3-sided protective housing Cable handwheel 2 x chip conveyor 60 tool changer

Condition: good (used), Year of construction: 1998, Universally applicable frame dowel and slot drilling machine with angle adjustment Especially designed for stair construction, window manufacturing, and versatile applications thanks to pneumatic height adjustment. Angled dowelling and spindle drillings, such as for balusters, can be easily accomplished with the swiveling drilling unit. Motor with pole switching, two speeds Motor power: 1.0 / 1.5 kW, 1400 and 2800 rpm Motor start via convenient handle switch Equipped with Röhm two-jaw chuck, 1 - 20 mm Linear laser for precise workpiece positioning Drilling unit can swivel 65 degrees left and right Pneumatic adjustment of working height allows dowelling on two levels without repositioning. Desired drilling heights can be set for each drilling level via digital counter, switching between levels is pneumatic and operated from the front Cross adjustment 340 mm, infinitely variable or in 12 mm increments via indexing rail Pneumatic clamping possible at any point, operated from the front Maximum height adjustment approx. 100 mm above table height Drilling stroke approx. 200 mm 2 pneumatic workpiece clamps, 1 clamping column repositionable to the front 2 swiveling workpiece supports Extraction funnel Central stop + 1 side stop Fixed mitre stop Length stop as round rod Psdpjxmatnjfx Ahvsgi Assorted drill bits Operating manual CE mark Machine was partly repainted due to paint splashes. Pneumatic hoses replaced Dimensions: approx. 1200 x 1350 x 1600 mm (LxWxH), weight 380 kg. The machine can be viewed and demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse, see "more offers from this seller."

Condition: used, Year of construction: 2016, TECHNICAL DATA AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting working area mm 0 x 800/0 x 800 X axis stroke mm 750 Max. travel speed of X-Y axes m/min 25 DRILLING UNIT Vertical spindles Number 7 (4X-4Y one common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed grooving saw (direction) X Grooving saw diameter mm 100 Max. grooving saw thickness mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Grooving saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 80+80 F10L Drilling unit Includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. Diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit. Positioning of the workpiece and drive of the work unit: A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the work unit during machining. Movement in the X and Y axes takes place on THK guides with transmission to reinforced toothed rails. Movement in the Z axis is pneumatically controlled on ball-bushing guides with adjustable stop positioning. The positioning of the work units is carried out using technology and drives with DC motors. CNC CONTROL The control system was specially developed for use in drilling and milling machines. CN - 7" color screen with touchscreen function - Alphanumeric keyboard - Self-diagnosis and any error messages or malfunctions that may occur, in the operator's language Programming - Programming via the CN - Automatic optimization of drilling operations - Option of plate zero point shift - Option of saving and importing drilling programs via USB dongle - Option of importing drilling programs from CAD-CAM external software Configuration - User interface in the same language as the instruction manual Graphic representation of the unit configuration Vacuum suction cups "B-Power Vacuum suction cups with double vacuum connection, recommended for particularly porous panels (e.g. MDF light). Machine user interface software Xilog Maestro USB Hardware and software requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, 2GHz min; Multicore processor recommended - Memory capacity: 1GB min., recommended 2GB - Free disk space: 5GB - Graphic card: Compatible OpenGL (The code includes a DVD for installation and a USB key) Xilog Maestro Features Programming - Parametric, graphic programming - Assisted programming with graphic and syntax help for drilling operations - Possibility to create and save machining macros Integrated additional functions - Self-diagnosis and possible error messages or malfunctions, in the operator's language - User interface in Pgodpfx Ahjvvi I Rovei

Condition: used, Year of construction: 1980, Number of drill spindles: 23 Pitch: 32 mm Drill bit holder: Screw-in thread Operation: Foot pedal Drilling direction: From above and from the front Swivel: Pneumatic Maximum throughput width: 720 mm Number of material clamps: 2 Type of material clamping: Pneumatic Design: Mobile Stop system: For hole line and construction line Dimensions: 1300 x 1200 x 1700 mm Approx. weight: 365 kg Motor power: 2.2 kW Pgodpfjwkir Dsx Ahvsi Storage location: Nattheim

Condition: used, Year of construction: 2002, Drilling capacity: 25 mm, spindle mount: MK 3 Podpfjvvi Ausx Ahvsgi Storage location: Nattheim

Condition: excellent (used), incl. rollable table 380 VAC Pgsdjryn Sbopfx Ahvsi Drilling capacity in steel: max. approx. Ø 18 mm Spindle speed 1-stage: 240 / 420 / 675 / 1100 / 1900 rpm Spindle speed 2-stage: 480 / 840 / 1350 / 2200 / 3800 rpm Projection: 215 mm Tool holder: MK 2 Quill stroke: 90 mm Table clamping surface: 220 x 285 mm Cross table travel X / Y: 160 x 180 mm Power requirement: 0.72 kW Weight: approx. 85 kg Dimensions W x D x H: approx. 800 x 900 x 1740 mm

Condition: used, mileage: 215,300 km, power: 235 kW (319.51 HP), first registration: 01/2008, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 4x2, wheelbase: 3,900 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 8, emission class: euro4, suspension: steel, total length: 7,160 mm, total width: 2,550 mm, total height: 3,820 mm, Year of construction: 2008, Equipment: ABS, air conditioning, cruise control, electric window regulation, power mirror, seat heater, traction control, trailer coupling, = Additional Options and Equipment = - Heated mirrors - Digital tachograph - Tachograph (control device) - Fixed - Halogen lights - Short cab - Manual - Power take-off (PTO) - Pump - Fabric upholstery = Notes = Number of axles: 2, Configuration: 4x2, Curb weight: 9,620 kg, Gross weight: 19,500 kg, Total fuel tank capacity: 300 liters, Trailer coupling, Kingpin diameter: 50 DIN, Fifth wheel: Fixed, Number of locks: 1, Cab type: Short cab, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Color: White, Heated mirrors, Lighting type: Halogen, Seat heating, Flashing lights, Engine output: 235 kW (315 HP), Fuel: Diesel, Euro: 4, Transmission type: Manual, Manufacturer: Volvo, Gears: 8, Clutch pedal, Power steering, ABS, ASR, PTO, PTO type: 1, Starter battery, Pump, Seating configuration: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual = Further Information = Transmission Transmission: VOL, 8-speed, manual Axle Configuration Tire size: 315/80R22.5 Brakes: Disc brakes Suspension: Leaf suspension Axle 1: Steering; Left tire tread: 9 mm; Right tire tread: 13 mm Axle 2: Twin tires; Inner left tire tread: 8 mm; Outer left tire tread: 8 mm; Inner right tire tread: 11 mm; Outer right tire tread: 11 mm Weights Unladen weight: 9,620 kg Payload: 9,880 kg Gross vehicle weight: 19,500 kg Functional Pump: Yes Condition Overall condition: average Technical condition: average Optical condition: average Damage: none Number of keys: 1 Identification Registration: KLEYN1 = Company Information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range includes all European brands, model years, and price categories. Why buy at Kleyn Trucks? Simply! • Large and rapidly changing inventory • Recognizable quality • Competitive prices • Professional business conduct • We speak many languages • We understand our customers • Support for import and transport • (Export) license plates arranged quickly • Expert technical services • The assurance of 'recognizable quality' • And more.... Visit our website for special offers and our complete stock list: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry via our website. Ask directly about our European warranty package. Pgsdpoylhfqsfx Ahvsi

Condition: used, machine/vehicle number: 008372, X axis working area: 4140 mm Y axis working area: 1850 mm Working Table: Pod and Rail Main Electrospindle power: 13 KW Number of controlled axes: 5 axes Maximum edge height: 65 mm Total number of drilling spindles: 23 Podpjylixlofx Ahvsgi Total number of tool changer positions: 18

Condition: like new (used), Year of construction: 2012, Machine is completly refurbished by our technical staff Psdjxn T Smopfx Ahvogi

Condition: good (used), Drilling machine for window lock and hinge holes. Set composed of two machines. Price €600. Podpfx Ahoyw R Rujvsgi