Used Metal Milling Machine for sale (66,468)

Year of construction: 1984, condition: ready for operation (used), travel distance X-axis: 15,900 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 790 mm, overall weight: 23,000 kg, number of axes: 3, This 3-axis GRABENER Single-sided sheet metal edge milling machine was manufactured in 1984. It features a powerful 50 kW DC motor, spindle speeds up to 500 rpm, and a maximum torque of 2,000 Nm. The machine offers extensive travel capabilities with 15,900 mm on the x-axis and rapid traverse rates up to 8,000 mm/min. Ideal for precision milling with a swivel range of +/-45°. Contact us for more information about this machine. • Milling spindle swivel range: ±45° • Spindle and tooling • Milling spindle drive power (DC motor): 50 kW • Spindle diameter at front bearing: 160 mm • Internal tool holder: ISO 50 (DIN 2079) • External tool holder: ISO 60 • Tool clamping: manual via M24 threaded rod • Speeds and torque • Spindle speeds: infinitely variable, 2 ranges, 50–500 rpm • Range 1: 50–250 rpm • Range 2: 100–500 rpm • Stage increment: 1:2 • Constant power range: 160 rpm • Max spindle torque: 2,000 Nm • Max spindle swivel speed: 2°/sec • Feeds • Milling feed in X: 40–4,000 mm/min (infinitely variable) • Rapid traverse X: 8,000 mm/min • Adjustment speed Y/Z: 20–500 mm/min (infinitely variable) • Rapid traverse Y/Z: 1,000 mm/min • Accuracy • Display/positioning accuracy (3 axes): 0.1 mm • Electrical • Operating voltage: 380 V, 50 Hz • Control voltage: 220 V • Distances and dimensions Gtjdox I S Rqopfx Ahvew • Clamping table to retracted, horizontal spindle axis: 500 mm • Cheek support (floor) to spindle center in vertical center position: 1,300 mm • Clamping table to center of support guide: 2,300 mm • Length of cheek and support guide: 16,800 mm

Condition: used, functionality: fully functional, power: 1.69 kW (2.30 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, total length: 500 mm, total width: 440 mm, total height: 230 mm, overall weight: 26 kg, Edge Milling Machine for Metal Brand: Marpol Rasant Gtjdox U D Afjpfx Ahvew Suitable for deburring and beveling metals (e.g., steel, aluminum, brass), plastics, etc. Used, fully functional Bevel angle: 45° Continuously adjustable bevel Maximum bevel: 8 mm x 45° Cutter equipped with carbide indexable inserts Guide rail length: 400 mm 2-speed motor, Speeds: Level 1: 1420 rpm Level 2: 2840 rpm Motor power: 1.7/2.3 HP Connection: 400 V, 3-phase Weight: 26 kg Required space (L x W x H): 500 x 440 x 230 mm The machine can be inspected and tested under power. The machine is being sold due to the upcoming closure of the business (retirement). We also have further offers online.

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Gtjdpjxdmgvjfx Ahvew Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 06651, travel distance X-axis: 6,800 mm, travel distance Y-axis: 3,700 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 15,000 mm, total width: 7,500 mm, spindle speed (max.): 4,000 rpm, total height: 7,000 mm, table height: 1,100 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 3,300 mm, type of input current: three-phase, table load: 50,000 kg, rotational speed (max.): 4,000 rpm, distance table center to spindle nose: 2,110 mm, overall weight: 110,000 kg, spindle motor power: 50,000 W, control cabinet length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, Equipment: rotational speed infinitely variable, MODEL: Portal Type AGE: 1992 S/N #: 06651 Gtodpfx Aeyahv Sohvsw CATEGORY: Mills, Planer Type, CNC CAPACITY: X-Axis Travel: 6800 mm Y-Axis Head Travel: 3700 mm Z-Axis Ram Stroke: 1500 mm, fixed crossrail Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 3300 mm Distance Table To Ram Face: 2110 mm, vertical passage 2000 mm Table Size: 6000 x 2500 mm Spindle (Quill) Diameter: 250 mm Spindle Taper: ISO #50 Spindle Speeds: 0-4000 RPM Spindle Motor: 50 KW EQUIPPED WITH: FIDIA System C20 CNC Control, new in 2002 CNC biaxial continous milling head Universal Milling Head with Auto Indexing Right Angle Head with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors both side Way Covers Rapid movements: Z-10.000 mm/min, X and Y-15.000 mm/min Table load: max 50.000 kg Weight of the machine: 110.000 kg Outside dimensions: 15.000 x 7.500 x 7050 mm Machine has been tested before dismantling and is fully operational, all mechanical components in excellent condition, electrics new in 2018. Machine available from stock. The price is now SPECIAL FROM STOCK. Once we will reassemble the machine, price will grow significantly. We can assist you to assemble and run up the machine.

Condition: new, functionality: fully functional, Year of construction: 2025, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, High-strength welding bed Partitioned smoke extraction system Fully automatic butter injection system Fully automatic cutting, material saving, fast speed Cutting area 4000 × 2000 mm X‑axis travel 1520 mm Y‑axis travel 4020 mm Z‑axis travel 80 mm Gjdpfsw A Iilex Ahvotw Max. combined positioning speed 170 m/min Acceleration 2.8 G Machine dimensions (L×W×H) 9500 × 2900 × 2380 mm Footprint 10500 × 3400 mm Net weight 8500 kg

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Laser power: 3KW, 6KW, 12KW Standard hardware: waste car, fully automatic butter injection, dual-control workbench, adaptive multi-angle site placement, beam light curtain Gjdpfx Ahjwz Ukysvstw Optional hardware: fire bricks, high-pressure proportional valve (standard for 6KW and above), safety door lock, Independent laser cabinet, rear exchange table light curtain, rear lifting light barrier, Rear camera, internal camera, monitoring display, radiation-proof glass, upper cover fan, upper cover, partition dust removal

Condition: new, functionality: fully functional, Year of construction: 2025, travel distance X-axis: 50,000 mm, travel distance Y-axis: 4,000 mm, input voltage: 380 V, input frequency: 50 Hz, warranty duration: 24 months, Equipment: cooling unit, GS-50040LB (Bevel Cutting) Ultra-Large Format Laser Cutting Machine 40kW Bevel Cutting + 60kW Straight Cutting Dual Beam, Dual Head, Dual Ultra Ultra-Large Cutting Area: 50m × 4m Dual High-Power Cutting Heads – 60kW Straight & 40kW Bevel Cutting Precision Cutting for Ultra-Thick Plates Bevel Cutting Performance: ✔ Y-Bevel: 40kW | 20mm Carbon Steel | 1.4m/min ✔ K-Bevel: 40kW | 30mm Carbon Steel | 0.35m/min ✔ V-Bevel: 40kW | 50mm Carbon Steel | 0.2m/min ✔ Straight Cutting: 60kW | 150mm Carbon Steel | 0.3m/min Applications: Aerospace | Shipbuilding | Bridges | Heavy Machinery Gedev Ng E Tjpfx Ahvetw

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, laser power: 40,000 W, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Type: exchange table, fully protected exchange table, ultra-high power, dual platform Gtjdpfxewxam Is Ahvew Laser power: 12KW15KW, 20KW, 30KW, 40KW, 3KW.6KW Standard hardware: scrap car, fire brick, fully automatic butter filling, dual-control workbench, adaptive multi-angle site placement, rear lift light-blocking door, rear camera, internal camera, monitoring display, radiation-proof glass, top cover beam light curtain, partition dust removal Optional hardware: light-blocking rubber strip, high-pressure proportional valve (standard above 6KW), safety door lock, independent laser cabinet, rear exchange table light curtain, top cover fan Optional functions: FDA configuration, CSA configuration, TUV configuration, conventional CE configuration

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 30,000 W, travel distance X-axis: 3,050 mm, travel distance Y-axis: 13,050 mm, travel distance Z-axis: 450 mm, positioning accuracy: 0.03 mm, repeat accuracy: 0.02 mm, workpiece weight (max.): 20,000 kg, input frequency: 50 Hz, total length: 16,800 mm, total width: 2,200 mm, total height: 5,120 mm, warranty duration: 24 months, working range: 13,000 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, GS-CL Series, Glorystar Single Table Gantry Type Metal Laser Cutting Machine Laser Power: 12000-80000W Fits in a standard 40HQ container The GS-L Series is a high-power metal laser cutting machine with a gantry-type segmented bed design. It can be freely customized to meet processing format requirements according to customer needs. Key Features: ● Super Large Processing Format with a gantry-style segmented design. ● The GS-L Series has the largest Z-axis travel and height in its class in the industry. Gtjdpfx Ahevmwn Hjvew Supports extreme thickness cutting for plates over 20mm. Capable of cutting ultra-thick plates up to 70mm. ● High Negative Pressure Automatic Partition Dust Removal ● Equipped with a high-air-volume fan for effective dust removal. Technical parameters: Working area (mm): 13000mm*3000mm（bevel cut: 12500mm*2500mm） X axis travel distance (mm): 3050mm Y axis travel distance (mm): 13050mm Z axis travel distance (mm): 450mm X/Y axis positioning accuracy: ≤0.03mm/m X/Y axis repeat positioning accuracy: ≤±0.02mm Max. synthetic positioning speed: 110m/min Max. acceleration: 1.2G Min. setting unit: 0.001mm Floor size (mm): 18500mm*6500mm Main body dimension (mm): 16800mm*5120mm*2200mm Worktable max. weight capacity (T): 20 tons (even load bearing)

Condition: ready for operation (used), Year of construction: 2019, HEUFT ONE: Metal Detection and Code Verification Conveyor System Model Heuft HBBNXZ72 YOM 2019 High sensitivity to ferrous and non-ferrous metals Stainless Steel Construction Full Container Checking System (A4) The devices of the new HEUFT ONE series set new standards in terms of detection accuracy, operational reliability and price / performance ratio during an in-line quality inspection in a confined space, and celebrated their world premiere at interpack. Gtjdpeyq Rkyjfx Ahvow The first metal detector and an inspection system for markings up to HEUFT standards can be experienced live at the trade fair. ONE for all: the new products make an affordable introduction to HEUFT cutting edge technology as particularly compact stand-alone devices which are extremely easy to integrate into packaging lines. They combine innovative detection technologies with customised hardware and software and proven procedures for a highly precise product tracking, inspection and fault rejection. Thus the compact complete solutions remove contaminated products and incorrectly marked packaging accurately; food safety has priority! The HEUFT ONE for detecting metal achieves maximum detection accuracy with unique evaluation procedures from the HEUFT development department: it even finds minute pieces of metal in filled food packaging reliably – almost unaffected by the product effect of saline or acidic products and the influence of metal packaging components. Even special ambient conditions such as a "metal free zone" are not necessary for the reliable operation of the compact stand-alone device. The first HEUFT metal detector complements the portfolio of sophisticated systems, which identify all types of foreign objects, with a slim entry-level solution. It is ideal for all those who only wish to find objects made of iron, steel, aluminium or stainless steel first and want to achieve a detection and rejection reliability up to HEUFT standards. The new HEUFT ONE for code verification, marking and dress inspection also provides this during the high-resolution complete examination of food packaging with in-house developed colour sensor camera technology and real-time image evaluation. It detects best before and expiry dates, barcodes and 2D codes, article and serial numbers, imprints and lettering which have been incorrectly applied and are inaccurate as regards content – and that independent of their respective position. The same also applies to deviating logos as well as non-brand colouring and design elements. Proven HEUFT procedures also ensure the accurate removal of incorrectly marked products in this case. Full traceability, clear information about shelf-life and digestibility as well as an attractive appearance at the point of sale are thus always guaranteed. The solid, extremely compact construction in accordance with the hygiene-optimised HEUFT CleanDesign also makes the new HEUFT ONE devices stand out. They are straightforward to integrate into existing packaging lines even where space is limited. The HEUFT ISI bus ensures minimum wiring with the open, flexible assembly directly above the conveyor. Dispensing with change parts makes easy brand changes without mechanical changeovers possible and the organised user interface, which has been reduced to the essentials, ensures error-free operation. This together with continuous monitoring brings the metal detection and code verification in line with HEUFT standards.

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots Gedpfx Ahjx D Tbmovotw T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Gedoxxb Rrspfx Ahvetw Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 42,832 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 760 mm, controller model: FANUC SERIES 18i MB, clearance between the columns: 2,300 mm, TECHNICAL DETAILS Travel X-axis: 3,000 mm Travel Y-axis: 2,100 mm Travel Z-axis: 760 mm Distance between columns: 2,300 mm Table size: 3,020 mm × 2,010 mm Maximum table load: 10,000 kg Spindle taper: ISO-50 Standard spindle speed: 6,000 rpm Max. tool diameter / with empty magazine slot: 127 mm / 215 mm Max. tool length: 350 mm Max. tool weight: 20 kg Tool changer capacity: 32 tools Rapid traverse (X-axis): 20,000 mm/min Rapid traverse (Y-axis): 15,000 mm/min Rapid traverse (Z-axis): 15,000 mm/min Feed rate: approx. 1 – 10,000 mm/min MACHINE DETAILS CNC control: FANUC SERIES 18i MB Gtjdpfxoymxi Ao Ahvjw Spindle motor power (continuous / 30 min): approx. 22 / 26 kW Operating hours, feed time: 42,832 h Operating hours, automatic mode: 53,246 h EQUIPMENT Automatic head changer (with angular milling head) RENISHAW probe

Condition: not inspected (used), Year of construction: 1968, functionality: unexamined, machine/vehicle number: 70013, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 32 rpm, controller manufacturer: HEIDENHAIN, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection between 08.04.26 and 16.04.26! TECHNICAL DETAILS X-axis travel: 400 mm Y-axis travel: 300 mm Z-axis travel: 300 mm Spindle speed range: 32 to 1,600 rpm Gtsdpfxjyk Ufno Ahvsw Table dimensions: 590 x 430 mm Jaw width: 160 mm MACHINE DETAILS Control manufacturer: HEIDENHAIN Dimensions & Weight Dimensions (L x W x H): 2,500 x 2,000 x 1,800 mm Machine weight: 1,500 kg EQUIPMENT Three-axis digital readout Workshop drawer cabinet with matching accessories

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, controller model: PHILIPS, jaw width: 125 mm, Equipment: documentation/manual, No minimum price – guaranteed sale to the highest bidder! Bids are binding and require timely collection between 08.04.26 and 16.04.26! TECHNICAL DETAILS Travel X-axis: 400 mm Travel Y-axis: 400 mm Travel Z-axis: 300 mm Table dimensions: 550 x 280 mm Jaw width: 125 mm Tool holder: SK 40 Godsyk Thuopfx Ahvetw MACHINE DETAILS Control: PHILIPS Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Rated current: 50 A Dimensions & weight L x W x H: 3000 x 2000 x 1800 mm Machine weight: 1500 kg EQUIPMENT Table with 4 T-slots Fitted vice Documentation

Condition: ready for operation (used), Year of construction: 1992, operating hours: 10,643 h, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 815 mm, travel distance Z-axis: 815 mm, rotational speed (max.): 3,600 rpm, controller model: Heidenhain iTNC 530, A retrofit of the machine was carried out in 2010! TECHNICAL DETAILS Travel range X-axis: 1,500 mm Travel range Y-axis: 815 mm Travel range Z-axis: 815 mm Clamping table: 3,250 x 815 mm Table load capacity: 5,000 kg Quill stroke: 150 mm Spindle: SK 50 Gtodeyrdxtopfx Ahvew Speed range: 40–3,600 rpm MACHINE DETAILS Control: Heidenhain iTNC 530 Milling heads: Usable as single, double, triple, or quadruple head Total power requirement: 44 kW Dimensions & Weight Required space: approx. 8 x 4 x 4.5 m Transport dimensions base unit: approx. 6 x 3 x 3.5 m Control cabinet: approx. 2.6 x 0.6 x 2.6 m Machine weight: approx. 20 t Operating Hours Control operating hours: 20,987 h Machine operating hours: 19,703 h Program run time: 10,643 h EQUIPMENT Hydraulics Various sheet metal parts

Condition: repair required (used), Year of construction: 2014, operating hours: 23,000 h, functionality: not functional, machine/vehicle number: 21066714, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 20,000 rpm, controller model: Siemens Sinumerik 840D sl, TECHNICAL DETAILS Travel X-axis: 2,000 mm Travel Y-axis: 1,000 mm Travel Z-axis: 600 mm Spindle speed: 20,000 rpm Rapid traverse X/Y-axis: 60 m/min Rapid traverse Z-axis: 45 m/min Tool holder: HSK-63F Clamping table dimensions: 2,000 x 1,000 mm MACHINE DETAILS Control model: Siemens Sinumerik 840D sl Operating hours: 23,000 h EQUIPMENT Gtodpfx Ahsyq Ra Usvew Swiveling spindle External cooling unit (manufacturer: Pfannenberg) Note: There is a fault in the control system. It does not respond to any inputs. Repair by Siemens Service is required!

Condition: ready for operation (used), Year of construction: 2008, operating hours: 53,216 h, functionality: fully functional, machine/vehicle number: 22024211, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 20,000 rpm, TECHNICAL DETAILS Travel X-axis: 2,000 mm Travel Y-axis: 1,000 mm Travel Z-axis: 600 mm Spindle speed: 20,000 rpm Rapid traverse X/Y-axis: 60 m/min Godpsyq Nx Njfx Ahvstw Rapid traverse Z-axis: 45 m/min Tool holder: HSK-63F Clamping table dimensions: 2,000 x 1,000 mm MACHINE DETAILS Control model: BWO CNC Operating hours: 53,216 h EQUIPMENT 5 compact clamps (Model: Kopal Duo) Custom machine enclosure Swiveling spindle External chiller (Manufacturer: Pfannenberg, cooling capacity: 1.7 kW)

Condition: ready for operation (used), Year of construction: 2008, operating hours: 73,695 h, functionality: fully functional, machine/vehicle number: 22021508, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 20,000 rpm, controller model: BWO RC, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 2,000 mm Travel Y-axis: 1,000 mm Travel Z-axis: 600 mm Gtodsyq Nx Ajpfx Ahvsw Spindle speed: 20,000 rpm Rapid traverse speed X/Y-axis: 60 m/min Rapid traverse speed Z-axis: 45 m/min Tool holder: HSK-63F Clamping table dimensions: 2,000 x 1,000 mm MACHINE DETAILS Control unit: BWO RC Operating hours: 73,695 h EQUIPMENT Swiveling spindle Coolant system (MMS) External chiller unit (Manufacturer: Maka) New ball screw for Z-axis, installed by Maka Service in 2024

Condition: excellent (used), Year of construction: 1998, Haffner Door Lock Mortising Machine used, in good condition Manufacturer: Haffner Model: SL 100 Machine No.: 5372 Column-type machine Chain mortising unit Door support Workpiece support Handle hole motor Faceplate motor Lubrication system Gedsyuty Sspfx Ahvotw Extraction connection D 80/100 mm Space requirements approx. 1200 mm x 700 mm x 2000 mm Weight approx. 300 kg Storage location: at customer's site Sale as is, as inspected, without guarantee or warranty

Condition: used, functionality: fully functional, table width: 700 mm, table length: 2,032 mm, overall weight: 5,800 kg, Brand: Zayer Model: 66BM Serial Number: 35909 3-axis digital position readout Fagor 30i-M Table size: 2032x700 mm Automatic travels: - X: 1,524 mm - Y (Ram): 1,016 mm - Z: 560 mm Taper: ISO 50 Number of speeds: 18 Speeds (Min./Max.): 28-1800 rpm Axis feeds: - X: 2 - 1,016 mm/min. - Y (Ram): 2 - 1,016 mm/min. - Z: 1 - 700 mm/min. Rapid traverses: X, Y (Ram): 2,400 mm/min. Z: 1,600 mm/min. Godpfxsyc R Nae Ahvotw Motors: 15 hp (Speeds) + 3.5 hp (Feeds) Weight: 5,800 kg Includes complete manual and spare parts book.

Condition: good (used), Year of construction: 1972, functionality: fully functional, overall weight: 1,200 kg, x-travel: 290 mm y-travel: 170 mm z-travel: 310 mm Millung spindle number of milling spindle turning speeds: 16 milling spindle turning speeds: 40 - 2000 U/min inner taper of milling spindle: ISO 40 max. diameter of the vice bore: 25 Vertical milling head inner taper of milling spindle: ISO 40 spindle turning speed range: 50 - 2.500 U/min max. diameter of the vice bore: 25 dimensions: 1.100 x 1.100 x 1.660 mm Gtjdsyufp Ejpfx Ahvow

Condition: used, Year of construction: 2016, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, height adjustment type: mechanical, overall weight: 450 kg, – Italian production – year of production 2016 Godpfxswb Ha Tj Ahvjtw – pre-milling – DTR, CE TECHNICAL PARAMETERS: – edge thickness: 0.5 - 3 mm – wooden edgeband: 0.5 - 5 mm – element height: 8 - 50 mm – minimum edgebanding length: 160 mm – minimum board width: 110 mm – feed speed: 7 m/min – pre-milling – radial cutters – edge cutting – radial scraper – straight scraper – blower for each unit – working pressure: 8 bar – working machine length: 2030 mm – transport dimensions (length/width/height): 330/80/125 cm – weight: 450 kg

Condition: good (used), Year of construction: 1972, functionality: fully functional, travel distance X-axis: 290 mm, travel distance Y-axis: 170 mm, travel distance Z-axis: 310 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, overall weight: 1,200 kg, x- travel: 290 mm y-travel: 170 mm z-travel: 310 mm Gtodpfxsyufnuj Ahvsw Milling spindle number of milling spindle turning speeds: 16 milling spindle turning speeds: 40-2000 U/min inner taper of milling spindle: ISO 40 max. diameter of the vice bore: 25 mm dimensions: 1066 x 1048 x 1330 mm

Condition: excellent (used), Year of construction: 1992, 1 pre-owned, very well-maintained universal tool milling machine with 3-axis digital readout, brand HEIDENHAIN, and stepless speed adjustment Manufacturer: MAHO, Origin Germany Model: MH 1000 Year of manufacture: 1967 / geometrically overhauled in 1992! Working area Table size: 1250 x 740 mm Travel ranges X-axis: 1000 mm Y-axis (vertical): 600 mm Z-axis (transverse): 750 mm Manual cross traverse of the table: 275 mm Working spindle Tool holder (DIN 2079): ISO 40 Quill stroke of the vertical spindle: 125 mm Speeds and feeds Spindle speed range: 32 – 1600 rpm, steplessly adjustable Feed range X + Z axis: 10 – 500 mm/min Rapid traverse X + Z axis: 1.4 m/min Feed range Y axis: 5 – 250 mm/min Rapid traverse Y axis: 0.7 m/min Drive power: 5.5 kW Resolution of linear measuring systems: 0.01 mm Weight and space requirement Dimensions (L x W x H): approx. 2400 x 2400 x 1800 mm Weight: 5500 kg Accessories / Special features: • 3-axis digital display, brand HEIDENHAIN • Tool holder ISO 40, DIN 2079 • Universal clamping table (rotatable, tiltable, and swivelable) • Stepless speed adjustment via MITSUBISHI A 700 inverter (converted in 2006 with new control cabinet) • Spindle head with horizontal spindle Gjdoygctrjpfx Ahvetw • Central lubrication • Coolant system • Lighting Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany