Used Portal Measurement Machine for sale (95,131)

Condition: new, Year of construction: 2025, machine/vehicle number: 306, First commissioning: 2024 Control: Heidenhain TNC 640 including handwheel HR 520 X-axis: approx. 4,000 mm Y-axis: approx. 2,700 mm Z-axis: approx. 1,300 mm A-axis: ± 120° C-axis: ± 360° Clamping table Clamping surface: approx. 4,000 x 2,500 x 213 mm Aluminum with T-slots across every 250mm Max load: 1000kg distributed over the entire surface 2-axis milling head HS673 Spindle power: 22 kW Spindle speed: max. 24,000 min-1 Torque: 18 Nm Tool holder: HSK 63A Tool clamping: pneumatic Blowing air / MMS: outside Linear axis drives Feed rate X and Y axis: up to 60 m/min Feed rate Z axis: up to 40 m/min Color Housing, portal, control cabinet: light gray Z slider and milling head: orange Additional equipment - Work area cover - 16-way tool changer - Control in a separate, rollable desk Optional for an additional charge: - Blum laser tool measurement - Renishaw RMP60 radio probe Isdpsvy Dugsfx Afietn - Heidenhain remote diagnosis Images show identical machine with slightly different equipment!

Condition: good (used), Year of construction: 2010, operating hours: 720 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 3,000 mm, Reserve price removed - guaranteed acceptance to the highest bidder.  TECHNICAL DETAILS Travel path X: 2,000 mm Travel path Y: 3,000 mm Itjdpfx Aovuzxlefijn EQUIPMENT - High frequency spindle - 2 x Kuka KR 210 R2700-2 / reach 2,700 mm Nominal load capacity: 210 kg / Year of manufacture 2001 + 2002 - Enclosure

Condition: like new (used), Year of construction: 2024, operating hours: 775 h, functionality: fully functional, grinding length: 2,000 mm, grinding width: 1,200 mm, total height: 720 mm, feed length X-axis: 2,500 mm, feed length Y-axis: 1,050 mm, feed length Z-axis: 1,100 mm, workpiece weight (max.): 3,500 kg, grinding height: 720 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 3 m/min, feed rate Z-axis: 5 m/min, grinding wheel diameter: 600 mm, distance table to spindle center: 1,050 mm, table length: 2,000 mm, table load: 4,000 kg, type of input current: three-phase, table width: 1,000 mm, grinding wheel width: 150 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 5 rpm, overall weight: 36,000 kg, grinding spindle motor power: 22 W, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 1,100 mm, warranty duration: 12 months, space requirement height: 4,550 mm, space requirement length: 7,850 mm, space requirement width: 4,840 mm, Equipment: documentation/manual, rotational speed infinitely variable,  Easy-to-use Z-Control control system with high levels of comfort  Automatic vertical infeed with dressing amount compensation  Fully automatic grinding cycle with dressing cycles  Grinding cycles: • Surface grinding • Plunge grinding • Roughing / finishing / sparking  Extremely simple operation via touchscreen  Large, clearly arranged 10.4" color screen  Electronic handwheel, effective on the vertical and transverse axes, switchable in two steps to 0.001 and 0.01 mm  Gantry-style machine design for maximum accuracy  Sturdy cast iron construction of all machine components  Heavy machine weight for maximum rigidity  Preloaded linear guide system in the vertical and transverse axes (Bosch Rexroth) for outstanding precision  Scraped double-V sliding guides in the X-axis ensures excellent damping properties and high-quality grinding results.  Hydraulic table drive with separate cooling unit Itjdpfx Aewax U Tjfijn to achieve good surface finishes.  Electromechanical transverse and vertical movement.  Direct measuring system in the vertical axis (Heidenhain) for precise positioning.  Rotary pulse generator in the transverse axis.  Maintenance-free belt filter system with a 2000-liter tank capacity and a 10-bar pressure pump for effective cooling and rinsing.  Integrated channel rinsing.  Upstream magnetic separator for pre-filtration.  Power supply: 400 volts, 3 phases, 50 Hz.  Continuously variable grinding spindle motor with constant cutting speed across the entire working range of the grinding wheel (vconstant).  Roller-bearing grinding spindle guarantees a long service life.  Belt-driven grinding spindle.  2 machine lights in the work area. (LED)  Table-mounted dressing device for high accuracy and surface quality with the option of mounting three diamond dressing tools  Electro-permanent magnetic chuck with integrated polarity reversal device and holding force adjustment, pole pitch p = 25 mm  Holding force adjustment in 16 steps  No heating of the magnetic chuck, therefore highly precise  Automatic central lubrication in the x-axis (slideway oil)  Automatic central lubrication in the y + z axes (grease)  Partially enclosed machine with sliding door and front-mounted service door; Open on the top left, closed on the top right with a 300 mm nozzle for extraction  Effective splash protection with good accessibility  Additional service door on the rear of the machine, including a second electronic handheld unit  Machine prepared for connection to an emulsion mist extraction system; Connection nozzle Ø = 300 mm Standard accessories Consisting of:  Grinding wheel holder  Grinding wheel 500 x 100 x 203.20 mm  Complete documentation  CE declaration of conformity  Acceptance report according to DIN 8632  Leveling elements  Balancing mandrel  Rolling stand Special accessories:  Semi-automatic grinding wheel balancing system with GAP

Condition: refurbished (used), Year of construction: 1999, travel distance X-axis: 11,450 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,250 mm, Technical description Value Unit Travel distance X-axis: 11,450 mm Y-axis: 3,500 mm Z-axis: 1,250 mm Cross-section of the Z-axis slider: 360 x 360 mm Portal aperture: 3,000 mm Height under vertical spindle: 1,400 mm Working clamping width: 2,500 mm Milling unit: Type FA 305 C Power: 30 kW Max. torque: 1,070 Nm Ijdjtix S Nopfx Afistn Max. speed: 4,000 rpm Cross section of the pusher: 360 x 360 mm Vertical head with spindle Power: 30 kW Max. speed: 4,000 rpm Max. torque: 1,070 Nm Rapid traverse in X, Z: 25,000 mm/min Rapid traverse in Y: 20,000 mm/min Work feed infinitely variable in X, Y and Z: 10,000 mm/min Compressive force of each axis: 25,000 N Tool holder: SK 50 Horizontal angle head with 144 x 2.5° pitch, with SK50 spindle Available power: 30 kW Max. speed: 4,000 rpm Max. torque: 1,070 Nm Positioning increment: 2.5 degrees Longitudinal pallet system 1 pallet shuttle with 2 storage stations 1 manual pallet transfer system between machine and shuttle 2 workpiece holder pallets: 5,000 x 2,500 mm Tool changer Chain magazine: 80 positions Distance between the positions on the chain: 130 mm Diameter of consecutive tools: 125 mm Tool diameter max.: 200 mm Maximum tool length: 400 mm Tool weight max.: 25 kg Tool change time, tool to tool: 8 sec Tool change time, chip to chip: 38 sec Equipment: Cooling devices: - Cooling via orientable nozzles - IKZ / cooling through the center of the spindle, 3,000 l tank, capacity: 30 l/min, pressure: 7 bar at the mold 2 chip conveyors: 1 Portal cladding Measuring probe, make: RENISHAW, type: MP14 Electronic handwheel Remote diagnosis Tool management and wear management Documentation in 2 copies: German / French CE marking Very well maintained, continuously serviced condition!

Condition: excellent (used), AL-Line 0607 Gantry Milling Machine with CE Marking Precision Collet HF Converter HFU-1500-SSE for Control Cabinet Installation Travel: 650 x 750 x 220 mm Mounting Area: approx. 1000 x 750 mm Clearance Height under Z: approx. 250 mm Guides: 20-series recirculating ball linear guides Ball Screws: 2 external spindles in X X: 16 x 10 mm Y: 16 x 10 mm Z: 16 x 5 mm Weight approx.: 120 kg Year of Manufacture: 2018 Equipment: Reference sensors on all axes Ijdpfsv Skpzex Afietn Machine base AL0607 for enclosure, fully assembled Aluminum profiles including 19 mm gray chipboard * Compact base frame made of aluminum profile * 4 x 3 Nm 2-phase hybrid servo motors / ES-M22430 AL-Line electric brake module for Z-axis for closed-loop system (prevents the Z-axis from dropping when the control is off) * Leadshine 80V/8A 3-axis closed-loop stepper motor controller in control cabinet * Leadshine 80V/8A closed-loop axis extension for control cabinet * Eding-CNC iCNC600 industrial controller for Eding CNC * Z-Finder inductive PNP tool length sensor with 14 mm probe head * HF spindle set 4545/1 Set consists of spindle, converter, cable, and spindle holder Manual change Speed: 5,000 – max. 60,000 rpm Power: Max. 0.45 kW Housing diameter: 45 mm Housing: Stainless steel Bearings: 2 bearings Hybrid ceramic ball bearings Lifetime grease lubrication Cooling: Labyrinth air cooling via air purge connection Tool change: Manual with union nut Clamping system: ER11 up to max. 8.0 mm Motor protection: PTC sensor Frequency: up to 1,000 Hz Air purge connection * Enclosure, table-top design, fully assembled 2 hinged doors at the front, 1 door at the side * Top cover * Special safety technology version: Reliable position detection for door release: consisting of safety relay and sensors DN3PS2 standstill monitor without sensor DINA, for 1/3-phase motors Reliable monitoring of spindle standstill for door release * AZM161SK safety switch, closed-circuit principle, 4NC, 2NO, 24V, fail-safe locking

Year of construction: 1999, condition: good (used), functionality: fully functional, End milling machine for portal construction ready for use Itjdpehzt Nhefx Afijn

Condition: excellent (used), Year of construction: 2012, First commissioned: 2012 Control: Heidenhain iTNC 530 including handwheel HR 420 X-axis: approx. 5,000 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,500 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 5,700 x 3,000 x 300 mm 2-axis milling head VH20 Spindle power: 40 kW Spindle speed: max. 25,000 min-1 Torque: 48 Nm Tool holder: HSK 63A Tool clamping: hydraulic Itodpfx Aovy A Tnsfijn Coolant supply: external and internal Blowing air: external Drives linear axes Feed rate X, Y axis: up to 50 m/min Feed speed Z-axis: up to 30 m/min Axis acceleration X-, Y-, Z-axis: up to 2.5 m/s2 Connection data Connection power: 190 kVa Back-up fuse: approx. 315 A Dimensions, weights Space requirement machine with peripherals: approx. 10,000 x 7,700 x 5,850 mm Total weight: approx. 63,000 kg Color Housing, portal, control cabinet: RAL 7035 light gray Milling head and applications: RAL 6038 bright green Additional equipment - Coolant supply with belt filter system - 30-way chain tool changer - Work area cover - Chip conveyor, right side Optional for an additional charge: - BLUM laser Condition of the machine Fully functional, very good condition. Already dismantled and stored.

Condition: excellent (used), Year of construction: 2017, operating hours: 9,380 h, functionality: fully functional, machine/vehicle number: 4455, travel distance X-axis: 3,740 mm, travel distance Y-axis: 2,800 mm, travel distance Z-axis: 480 mm, spindle speed (max.): 60,000 rpm, Reserve price removed - guaranteed to go to the highest bidder. TECHNICAL DETAILS X-travel: 3740 mm Y-travel: 2800 mm Z-travel: 480 mm Control: Siemens Sinumerik ONE - HMI Operate user interface, WIN 10 Spindle speed: 60,000 rpm Spindle axis manufacturer: GMN Extraction: Ruwac Zone 22 Iodpsvuztiofx Afijtn Extraction hood: rigid or height-adjustable EQUIPMENT - 1 Kuka KR 420 R3300 robot / reach 3326 mm, nominal payload 420 kg - 1 Kuka KR 200 L140-2comp robot / reach 2800 mm, nominal payload 140 kg - 1 Kuka KR 140-3comp robot / reach 2400 mm, nominal payload 140 kg - Conveyor belt for transporting the scrap metal - Chip conveyor belt

Condition: good (used), Year of construction: 1999, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,150 mm, Fooke Endura Type 8. Year of manufacture 1999, Siemens 840 D Powerline control, X/Y/Z travel 3000/2500/1150 mm, Bridge height 800 mm, 23 kW milling spindle, Forked milling head with 365° rotation axis, Swivel axis +/- 100°, Feed rates up to 15 m/min, Spindle speed up to 16,000 rpm, HSK A 63, Electric handwheel, Itsdsv N Uuvopfx Afisn Machine weight 50,000 kg

Condition: like new (used), Year of construction: 2008, operating hours: 200 h, functionality: fully functional, travel distance X-axis: 1,015 mm, travel distance Y-axis: 1,015 mm, travel distance Z-axis: 200 mm, CNC milling machines are computer-aided with the help of special software (CAD/CAM) and enable various materials such as metal, plastic, foam, stone or wood to be processed precisely in a short space of time. The drawing or model created using the software will create the manufacturing process. For example, a prototype can be milled or the production of a series of standard parts can be started. When the design is ready, the CNC control takes over the task of moving the horizontal and vertical axes throughout the machining process. The motor of the milling machine can be switched on directly at the start of the computer program under the supervision of the operator. This enables them to efficiently perform a large number of cutting, engraving, face milling or drilling operations by removing material on the surface or in depth to produce complex parts with high precision. Digital milling technology enables operations with a high quality finish, a lower risk of wear of the machined parts and greater reliability, as the fragility of the manufactured products is reduced, even for parts with a small format or diameter. Thanks to a better configuration of operations, it offers the advantage of increasing production speed while maintaining optimum manufacturing quality. Itsdpfovaxunjx Afijn

Condition: excellent (used), Year of construction: 2013, First commissioned: 2013 Control: Heidenhain iTNC 530 including handwheel HR 520 X-axis: approx. 2,500 mm Itjdevy A Tbspfx Afisn Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 2,500 x 3,250 x 400 mm 2-axis milling head VH20 Spindle power: 45 kW Spindle speed: max. 25,000 min-1 Torque: 67 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Blowing air: external Drives linear axes Feed rate X, Y, Z axes: up to 60 m/min Axis acceleration X, Y, Z axis: up to 5 m/s2 Connection data Connection power: 180 kVa Pre-fuse: approx. 290 A Dimensions, weights Space requirement machine with peripherals: approx. 10,000 x 9,000 x 5,650 mm Total weight: approx. 55,000 kg Color Housing, portal, control cabinet: RAL 7035 light gray Milling head and applications: RAL 6038 bright green Description: Additional equipment - Coolant supply with belt filter system - 50-way chain tool changer - Work area cover - Chip conveyor - Emulsion mist extraction system from LTA Optional for an additional charge: - Renishaw RMP60 radio probe - Heidenhain remote diagnosis Condition of the Machine Fully functional, very good condition. Already dismantled and stored.

Condition: good (used), Year of construction: 2005, travel distance X-axis: 3,000 mm, travel distance Y-axis: 30,000 mm, travel distance Z-axis: 1,000 mm, Unisign Uniport 6000 portal milling machine, Year of manufacture 2005, Control Siemens 840 D, Travel X/Y/Z 3000/3000/1000 mm, C axis for turning, Table Ø 2500 x 2000 mm, Max turning Ø 3000 x 2500 mm, Max. turning height 1000 mm, Angle head for lateral machining, 2.5° Hirth toothing, Spindle speed up to 6,000 rpm, Itedpfxjvwmlis Afisn Spindle power 36 KW, Holder HSK 100, 30-way tool changer, 3D measuring probe, Chip conveyor, Faceplate Ø 2000 mm, Max. load faceplate 10,000 kg, Machine weight 45,000 kg,

Condition: ready for operation (used), Year of construction: 2008, EDEL CP4020 5-Axis Simultaneous Gantry Machining Centre 4000x2000 (2008) Manufacturer: EDEL Model: CP4020 Year of manufacture: 2008 Condition: used, good, powered and in production Control: Heidenhain iTNC 530 Power-on hours: approx. 71,000 h Spindle hours: approx. 36,000 h Spindle speed: 18,000 rpm Spindle taper: HSK63 Swivel head C-axis +/- 360° Itsdpfx Afexixq Dsisn A-axis +/- 110° X-travel: 4000 mm Y-travel: 2000 mm Z-travel: 1200 mm ICS 40 bar (internal coolant supply) Direct measuring system Belt filtration unit Tool magazine: 48 positions Light barrier Wireless probing system

Year of construction: 2012, condition: ready for operation (used), The plant was set up once in 2012 and then dismantled and put into storage, includes Anti-Drift Device Oerlikon ADVi 40x45 So and Section Assembly Line Oerlikon RB-AFV/FV 7500 So, with documentation, no videos available, can be inspected on site in stored condition. Ijdepu A D Uepfx Afijtn

Condition: like new (used), Year of construction: 2024, functionality: fully functional, feed length X-axis: 4,000 mm, feed length Z-axis: 800 mm, Installation position vertical Stroke 800 mm Repeatability ± 0.02 mm Travel time for 800 mm 4.0 s Acceleration 0.83 m/s² (emergency stop max. 8 m/s²) Speed 0.227 m/s Axis Spindle axis EGC-185-800-BS-40P-KF-0H-MR-GK with recirculating ball bearing guide Drive package Servo motor EMMT-AS-100-S-HS-RMB with multiturn encoder and holding brake, planetary gearbox EMGA-80-P-G8-SAS-100, and parallel mounting kit EAMM-U-110-S95-80G-207 Motor controller CMMT-AS-C3-11A-P3-MP-S1 with multiprotocol interface Motor cable NEBM-M23G15-EH-20-Q7N-R3LEG14, length 20 m Sensors Proximity switch SIES-8M-PO-24V-K-0.3-M8D X-axis, electric Installation position horizontal Stroke 4000 mm Repeatability ± 0.1 mm Travel time for 4000 mm Itedpfx Aew Hcd Eefijn 9.0 s Acceleration 1.0 m/s² (emergency stop max. 5 m/s²) Speed 0.5 m/s Axis Toothed belt axis EGC-120-4000-TB-KF-0H-GV with extended carriage

Condition: new, Year of construction: 2018, functionality: fully functional, feed length Y-axis: 600 mm, feed length Z-axis: 50 mm, 2* C99023 Handling Type: 2D Linear Gantry Itedpfjw Hb Rqox Afion System Series: YXCL-3 Payload: 5 kg Stroke in Y-Direction: 600 mm Stroke in Z-Direction: 50 mm Festo Motor: No Festo Motor Controller: No Mounting Type: Complete Assembly Axis Mounting Kit If you have any further questions or require more information, please contact us.

Condition: new, These are the original grease cartridges for the LGB 125ml. Machines that need to be replaced regularly to ensure precise lubrication. Iedpsv Ak Sdofx Afijtn The price is for 1 piece. For other spare parts for LGB L.G.B. SCOP, please feel free to contact me as I am the representative.

Condition: new, functionality: fully functional, Year of construction: 2025, The VSI (Vertical Shaft Impactor) sand making machine is a type of crusher designed to accelerate the crushing of aggregate and produce cubical-shaped sand. It is widely used in the field of construction, mining, and other similar industries. Here are key features and information about VSI sand making machines: 1. Working Principle: - The VSI sand making machine operates on the principle of stone impacting stone or stone impacting iron. Material is fed into the center of the rotor, which accelerates to high speed to throw the material outward against a wear-resistant lining. 2. Rotor and Crushing Chamber: - The rotor is a crucial part of the VSI machine and is often designed with multiple pockets to facilitate material throwing and crushing. - The crushing chamber is lined with wear-resistant materials to endure the impact and abrasion during the crushing process. 3. Feedstock Control: - The feedstock (material to be crushed) can be controlled using a variable speed control system, allowing for adjustments to achieve the desired particle size. 4. Material Types: Itedjq Nd U Hopfx Afijn - VSI machines are suitable for processing various materials, including hard and abrasive materials such as rocks, ores, and minerals. 5. Cubical Shaping: - One of the significant advantages of VSI machines is their ability to produce cubical-shaped end products, which is desirable for high-quality concrete and asphalt production. 6. Adjustable Discharge: - The machine usually has an adjustable discharge opening, allowing for customization of the final product size. 7. Sand Production: - VSI sand making machines are primarily used to produce manufactured sand (M-sand) and crushed sand, which are essential components in the construction industry. 8. Maintenance: - Regular maintenance is required to ensure optimal performance and extend the machine's lifespan. This includes checking wear parts, lubrication, and addressing any issues promptly. 9. Variations: - Different manufacturers may offer variations of VSI machines with unique features or specifications. Common variations include open rotor and closed rotor designs. 10. Environmental Considerations: - VSI sand making machines are generally considered environmentally friendly as they produce less dust and noise compared to traditional crushers. 11. Manufacturers: - Well-known manufacturers produce VSI sand making machines, and it's crucial to choose a reputable supplier with a track record of providing reliable equipment. When considering a VSI sand making machine, factors such as feed size, capacity, and the desired end product specifications should be taken into account. Additionally, check the reputation of the manufacturer, and consider customer reviews and feedback regarding the specific model you are interested in.

Condition: new, Year of construction: 2025, -TFON Leveltech® XS-3520 Leveling Machine -The TFON Leveltech® XS-3520 is a compact and efficient leveling solution designed for thin materials and smaller widths. Equipped with advanced electromechanical controls and user-friendly touchscreen operation, it delivers precision leveling with reliable overload protection for enhanced safety. -Key Specifications: Material Thickness: 0.3 mm – 5.0 mm Maximum Material Width: 200 mm Minimum Material Length: 70 mm Itsdpfx Afsityvfjisn Flattening Gap Adjustment: Electromechanical / PLC Controlled Overload Protection: Standard Control Interface: Touchscreen HMI Machine Weight: 2,000 kg Machine Dimensions(L × W × H): 2,225 × 1,595 × 1,850 mm

Condition: new, power: 110 kW (149.56 HP), Year of construction: 2025, Bauxite Crusher: Bauxite is an aluminum ore, and crushers or mills are used to break down the bauxite into smaller pieces for further processing. Jaw crushers, impact crushers, or cone crushers may be used for this purpose. Granite Crusher: Granite is a hard and durable natural stone. Crushers used for granite crushing typically include jaw crushers, impact crushers, and cone crushers. These crushers can handle the varying hardness of granite and produce different sizes of crushed products. Bentonite Crusher: Bentonite is a type of clay with excellent water-absorbing and plasticity properties. Crushers such as jaw crushers or cone crushers are used to break down the bentonite into a manageable size for further processing. Barite Crusher: Itsdpfx Afoq Nx Apjion Barite, also known as baryte, is a mineral consisting of barium sulfate. Crushers like jaw crushers and cone crushers are commonly used in the crushing process of barite. Impact crushers may also be used for shaping and processing finer particles. For each of these minerals, the selection of the appropriate crusher depends on factors such as the hardness of the material, the required final product size, and the specific characteristics of the deposit. It's also important to consider whether a primary crusher, secondary crusher, or even tertiary crusher is needed in the processing flow. Additionally, for certain applications, grinding mills may be employed after the initial crushing stage to further reduce the size of the particles. Grinding mills suitable for these minerals might include ball mills, Raymond mills, or vertical roller mills, depending on the specific requirements of the process. Remember that the choice of crushers and mills is often part of a larger mineral processing plant design, and the selection process should take into account the overall production requirements, mineral characteristics, and economic considerations.

Condition: new, Year of construction: 2025, -Tfon Leveltech® S-3513 Leveling Machine -The Tfon Leveltech® S-3513 is a precision leveling machine optimized for ultra-thin materials, combining advanced electromechanical controls with easy operation for consistent, high-quality flattening results -Key Specifications: Itjdpfx Aekyrzljfisn Material Thickness: 0 – 0.3 mm -Maximum Material Width: 1.300 mm Minimum Material Length: 70 mm Quick Change System for Straightening Rollers: Standard. Flattening Gap Adjustment: Electromechanical / PC Controlled Machine Dimensions (L × W × H): 2,685 × 1,585 × 1,820 mm. Total Weight: 5.000 kg.

Condition: new, Year of construction: 2025, Gravel and aggregate production equipment is used to crush, screen, and process stones, rocks, and other materials for the construction industry. This equipment is essential in producing various types of aggregates, including crushed stone, gravel, sand, and recycled concrete, which are used in the construction of roads, buildings, bridges, and other infrastructure projects. Here are some common types of equipment used in gravel and aggregate production: 1. Jaw Crusher: - Jaw crushers are primary crushers used to break down large rocks into smaller, more manageable pieces. They are essential for the initial stage of aggregate production. 2. Impact Crusher: - Impact crushers are used to crush rocks and stones with the help of impact force. They are suitable for shaping and producing fine aggregates. 3. Cone Crusher: - Cone crushers are often used for secondary and tertiary crushing in aggregate production. They produce well-shaped and finely graded aggregates. 4. Vertical Shaft Impact (VSI) Crusher: - VSI crushers are designed for shaping and producing high-quality artificial sand. They are suitable for processing materials with high abrasiveness. 5. Screens: - Vibrating screens are used to separate different sizes of aggregates. They classify the material based on particle size and ensure that the final products meet specified gradation requirements. Itsdpfx Ajq Nxz Dsfien 6. Scalping Screens: - Scalping screens are used to remove oversized materials before they reach the primary crusher. This helps to optimize the crushing process and prevent damage to the equipment. 7. Washing Equipment: - Washing equipment, such as sand screws or log washers, is used to remove impurities and fine particles from aggregates. This is particularly important for producing high-quality concrete sand. 8. Conveyors: - Conveyors are used to transport materials between different stages of the crushing and screening process. They play a crucial role in enhancing efficiency in material handling. 9. Stackers and Reclaimers: - Stackers are used to create stockpiles of processed aggregates, while reclaimers are used to retrieve the material from the stockpile. Both are essential for efficient material storage and handling. 10. Crushing Plants: - Complete crushing plants include various types of crushers, screens, and conveyors integrated into a single system. These plants are designed to handle large volumes of material efficiently.

Condition: new, Year of construction: 2025, -Tfon Leveltech® TF M-5516 Leveling Machine Engineered for precision leveling, the TF M-5516 efficiently handles material thicknesses from 1 to 15 mm with advanced control features for optimal performance and ease of use -Key Specifications -Material Thickness: 1 – 15 mm Itodpfx Aekyrqfjfisn -Maximum Material Width: 1,600 mm Minimum Material Length: 110 mm. Quick Change System for Straightening Rollers: Standard Flattening Gap Adjustment: Servo Hydraulic / PC Controlled Overload Protection: Standard Control Screen: Touchscreen Machine Size (L × W × H): 3,500 × 2,905 × 1,950 mm Total Weight: 19.000 kg.

Condition: new, Year of construction: 2025, Creating a cheap portable or mobile sand making plant involves optimizing costs while maintaining functionality and efficiency. Here's a basic outline of components and considerations for designing a cost-effective portable sand making plant: 1. Portable Sand Making Machine: - Select a cost-effective sand making machine that meets your production requirements. Consider factors like capacity, efficiency, and maintenance costs. - Look for options that offer good performance at a lower initial investment. 2. Screening Equipment: - Choose a portable screening unit to separate the sand into different sizes. This is crucial for producing high-quality sand with the desired particle size distribution. - Consider modular screening units that are easy to transport and set up. 3. Conveyor Systems: - Utilize conveyors to transport raw materials between different components of the plant. Opt for simple and reliable conveyor systems. - Explore cost-effective conveyor options that are easy to maintain. 4. Hopper and Feeder: Iodpfxsq N Ud Io Afistn - Incorporate a hopper and feeder system to ensure a continuous flow of raw materials to the sand making machine. This helps optimize the production process. - Choose a design that minimizes material spillage and wastage. 5. Power Source: - Consider energy-efficient power sources to reduce operational costs. This could include using generators or connecting to the electrical grid, depending on the availability and cost of electricity in your location. 6. Chassis and Mobility: - Opt for a simple and robust chassis design that allows for easy transportation. Depending on your needs, choose between wheels or tracks for mobility. - Aim for a design that facilitates quick setup and dismantling to save time and labor costs. 7. Control System: - Implement a user-friendly control system that enables operators to monitor and adjust the sand making process efficiently. - Consider automation features that enhance control and reduce the need for constant manual intervention. 8. Dust Control and Environmental Considerations: - Integrate effective dust control measures to comply with environmental regulations and ensure a safe working environment. - Explore environmentally friendly features to align with sustainability goals. 9. Modular Design: - Consider a modular design for easy customization and scalability. This allows you to adapt the plant to varying production needs over time. 10. Used Equipment: - Explore the possibility of using refurbished or used equipment to cut down on initial costs. Ensure that the used equipment is in good working condition and can meet your production requirements. Remember that while cost optimization is important, it's crucial to maintain the quality and efficiency of the sand making process. Additionally, compliance with environmental regulations should be a priority. Always consider the specific requirements of your project and seek professional advice if needed.

Condition: new, Year of construction: 2025, -TFON Leveltech® Leveling Machine Series Models: S-3560, S-3511, S-3513, S-3516 -Designed for precision leveling of thin materials, these machines feature advanced electromechanical controls and user-friendly touchscreen interfaces for efficient operation. -Material Thickness: 0.3 mm – 5.0 mm Maximum Material Width -S-3560: 600 mm -S-3511: 1.100 mm S-3513: 1,300 mm Iodpfx Ajhwb Utsfietn S-3516: (width not specified) Minimum Material Length: 70 mm. Flattening Gap Adjustment: Electromechanical / PLC Controlled. Overload Protection: Standard. Control Screen: Touchscreen Machine Weight: S-3560: 5.000 kg S-3511: 10.000 kg. S-3513: 14.000 kg. Machine Dimensions (L × W × H): S-3560: 1,985 × 1,585 × 1,820 mm. S-3511: 2,485 × 1,585 × 1,820 mm. S-3513: 2,695 × 1,585 × 1,820 mm