Measuring Machine

HOMMEL F1004/350 Formmesssystem

Condition: used, Year of construction: 2000, table length 1160 mm Pgsdpfjt Hw S Iex Amysp table width 710 mm daylight 650 mm Control WENZEL ME 5007 total power requirement kW weight of the machine ca. 800 kg dimensions of the machine ca. m 3-D-coordinate measuring machine with METROLOG II-Software

Condition: used, Year of construction: 1992, Measuring range, X-axis: 2400 mm Measuring range, Y-axis: 1200 mm Measuring range, Z-axis: 1500 mm Pjdeg Er Nlepfx Amyjgp Machine weight: approx. 9.00 t

Condition: good (used), Centerless grinding machine HERMINGHAUSEN SR40 III CNC Pgedpfx Amsgq Ddfsyjp

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, Working area Grinding length: 250 mm Centre height: 100 mm Workpiece weight: 30 kg Z-axis: 350 mm Table adjustment: 8 ° degrees X-axis: 190 mm Grinding spindle Grinding wheel diameter max.: 500 mm Grinding wheel width max.: 80 mm Grinding wheel bore: 127 (203) Grinding wheel motor power: 5.5 kW Peripheral speed: 50 m/s Grinding wheel protection cover: D500 x 80mm Workpiece spindle Speed: 1 - 2,000 rpm Workpiece spindle mount: MK4 Tailstock Tailstock quill mount: MK3 Psdpfx Amovz Snkeyegp Tailstock quill stroke length: 30 mm Cylinder fine adjustment range: ± 0.04 Equipment Paper belt filter system Rinse gun Mechanical fume extraction

Condition: ready for operation (used), Rotary indexing center RT100/12-26 Manufacturer: Pfiffner Serial number 1101141101 Pgedoi Ewn Eopfx Amyop Operating hours: 42,500 Footprint: 14m x 8m

Year of construction: 1990, condition: used, x-travel 850 mm y-travel 1200 mm z-travel 600 mm total power requirement kW weight of the machine ca. t Pjdet Hwqkopfx Amyjgp dimensions of the machine ca. m Universal 3D measuring center, double-column, modern software, many accessories

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, input voltage: 400 V, year of last overhaul: 2023, Description – General: Year of manufacture: 2001/2023 Manufacturer: Emag Podpfx Amotpu Szsyjgp Machine type: VL3 Technical data: Control system: Fanuc 21i-T Swinging diameter: approx. 210 mm Maximum speed: 6,500 rpm Turret: VDI 40 mm, 12 stations The machine does not have a live tool. Hinged belt chip conveyor Spindle mount: GR. 5 Rotating parts conveyor. Machine weight: approx. 5.5 t The following work was carried out during this overhaul in 2023: - The machine was completely disassembled, cleaned, and repainted. - The main spindle was fitted with new bearings. - The guides and guide shoes in the X-axis and Z-axis were replaced. - The ball screw in the X-axis and Z-axis was replaced. - New unit for central lubrication and new hoses. - The hydraulic unit was inspected and serviced. The drive coupling between the motor and pump was replaced. - The cooling unit was inspected and serviced; the temperature difference controller was replaced. - The clamping cylinder was fitted with new bearings and seals. - The gearbox of the A-axis was fitted with new bearings, and the coupling between the motor and gearbox was replaced. - The electrical cabinet was cleaned. - The control panel was replaced. - New screen. - New internal lighting. - The turret was disassembled, wear parts were inspected, cleaned, and re-sealed. - The turret encoder and encoder wheel were cleaned. - The length measuring systems in the X-axis and Z-axis were disassembled and cleaned. - The springs of the pickup station were replaced. - The motors of the X-axis and Z-axis were checked for bearing damage. - The panes on the work door were replaced. - The chip conveyor was completely disassembled, fitted with new bearings, cleaned, and painted. - Various small parts on the machine were also replaced, of course. The product has been described by us with the utmost care. The description is non-binding and should be verified during an inspection.

Condition: good (used), Year of construction: 2012, CNC long-turn lathe Podpfxszilk Rs Amyegp Manufacturer: STAR Type: SR-20R IV type B Year of manufacture: 2012 with: FANUC 31i-B5 control system Synchronous spindle Powered tools C-axis Programmable B-axis Y2-axis High-pressure pump Rear-end machining Fire extinguishing system Bar loader magazine FMB TURBO 3-36

Condition: new, Year of construction: 2025, saw blade diameter: 360 mm, High-performance Everising fully automatic circular saw (NEW) incl. magazine. For the use of thin-cutting circular saw blades (carbide / cermet) Basic data: - Application range: 15-100mm round (rectangle 15-80mm) - Drive: 11 kW - Blade dimensions: 360 x 2.6 x 2.25 - Saw blade speed: 40 - 160 rpm - Weight: 4 tons - Dimension: 2900 x 7038mm (incl. magazine) Pgedeq Ul Izopfx Amysp Features: - Automatic loading magazine 6 meters (for round material 6 meters) - Emulsion cooling option - Siemens control system - Electromagnetic brake system - Direct-driven saw spindle for very high cutting performance - Ball screw spindle incl. servomotors for precise feed - Heavy-duty design - Minimum quantity lubrication - Inverter-controlled stepless cutting speed - Fully encapsulated, low-noise - Automatic cut and remnant sorting - etc. Other models available: P-50 ILA: Cutting range 8-50mm P-75 ILA: Cutting range 10-75mm P-100 ILA: Cutting range 15-100mm P-150 ILA: Cutting range 70-150mm P-160 ILA: Cutting range 70-160mm P-180 ILA: Cutting range 70-180mm P-230 ILA: Cutting range 70-230mm

Condition: good (used), Year of construction: 2003, functionality: fully functional, For sale used Mori Seiki VL-25A1 in excellent condition. Pgjdpjuf Tb Ujfx Amyjp Year: 2003 Mori Siki Mori Siki Mori Siki Mori Siki, 2003. Delivery parity: EXW Székesfehérvár. We can assist in disassembling and assembling the machine on request.