Used Portal Measurement Machine for sale (67,740)

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, type of input current: AC, input voltage: 230 V, Equipment: documentation/manual, Keyence XM-C1000 Portable Coordinate Measuring Machine / Measurement System Manufacturer: Keyence Model: XM-C1000 Condition: Used, fully functional For sale is a used Keyence XM-C1000 measurement system for precise 3D coordinate measurement of components and assemblies. The system enables fast and reproducible measurements without complex programming and is ideal for quality assurance, incoming goods inspection, first article inspection, and production monitoring. The XM-C1000 impresses with its ease of use, high measurement accuracy, and flexible application possibilities. Measurements of distances, diameters, positions, angles, and geometric tolerances can be performed and documented efficiently. Technical features: Portable optical coordinate measuring system Precise 3D measurements Intuitive user interface Fast inspection processes Automatic measurement reports Bsdpoztzm Nefx Amrsln Ideal for production and quality assurance Condition: Used Fully functional Good optical condition Normal signs of wear and tear Inspection and functional testing possible by appointment Scope of delivery: Keyence XM-C1000 measurement system Existing accessories as shown in the picture Documentation

Condition: ready for operation (used), Hommel Opticline Contour 414 Wave Measuring Instrument, Measuring Device, Wave Measuring Machine Max. measuring diameter: 140 mm Max. measuring length: 300 mm Resolution: 0.1 µm Measuring accuracy (diameter): (1.0 + D/200) µm Measuring accuracy (length): (2.6 + L/200) µm Repeatability (diameter): 0.3 µm Measuring speed: automatic, 10–80 mm/s Positioning speed: up to 200 mm/s Rotational speed: 1 rotation/s Description has been copied. You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Blsdezz Huuepfx Amron Subject to prior sale. Visit our shop and see our other offers as well. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are reserved.

Condition: ready for operation (used), Zeiss MC 850 3D coordinate measuring machine Measuring range x: approx. 800-850mm Measuring range y: approx. 1200mm Measuring range z: approx. 600mm New software 2025 Accessories: Computer Changer Probe You are welcome to visit us for a viewing. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Bljdpfx Amsznkulsrjn Subject to prior sale. Visit our shop and check out our other offers as well. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data as well as errors in the description of the item may occur and are subject to change.

Condition: good (used), Year of construction: 2005, functionality: fully functional, year of last overhaul: 2021, Equipment: documentation/manual, type plate available, Highly precise, mobile coordinate measuring machine (CMM) of the FARO Titanium type, with an arm length of 2.4 meters and 6 axes. The system is in good condition and ready for immediate use. As it is the 6-axis version, the arm is particularly rigid and delivers extremely precise, repeatable measurement results during the tactile probing of components. Perfectly suited for industrial quality assurance, first article inspection, or the comparison of nominal and actual values directly in the workshop. Technical data & highlights: Measuring range: 2.4 meters (perfect for medium to large components and fixtures) Kinematics: 6 axes (maximum rigidity for tactile measurements) Bledpfozx Uwxjx Amrsn Precision: Very high single-point repeatability (typically approx. ±0.025 mm) Environmental protection: 6 internal temperature sensors automatically compensate for fluctuations in the workshop. Software included: Delcam PowerInspect 2015 (with dongle) The package includes the professional measuring software Delcam PowerInspect. Activation is straightforward via the included hardware USB dongle (no subscription, unlimited usage). Fast comparison of nominal and actual values against CAD data. Creation of professional measurement reports for customers. Simple evaluation of form and position tolerances. Scope of delivery: FARO Titanium 2.4m measuring arm (6 axes) Original, robust FARO transport case (heavy-duty) Delcam PowerInspect software incl. USB license dongle Measuring probe / sensors incl. calibration sphere Power supply, cable set Condition & details: Year of manufacture: 2005 Last calibration: 06/2021, certificates available Normal signs of wear and tear Shipping can be arranged for an additional fee. The measuring arm can be inspected and tested by appointment.

Condition: new, Year of construction: 2023, functionality: fully functional, measuring range X-axis: 600 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 500 mm, workpiece weight (max.): 300 kg, path measurement accuracy: 2 mm, overall weight: 435 kg, travel speed (max.): 30,000 mm/min, compressed air connection: 5 bar, Equipment: documentation/manual, type plate available, The COORD3 Benchmark 06.05.05 is a high-quality, CNC-controlled portal measuring machine (half-gantry type) designed for accurate 3D product inspection. The machine combines a stable mechanical structure with high measuring speeds, making it suitable for use in both temperature-controlled measuring rooms and controlled production environments. 𝗘𝘅𝗰𝗲𝗹𝗹𝗲𝗻𝘁 𝗰𝗼𝗻𝗱𝗶𝘁𝗶𝗼𝗻 (𝗗𝗲𝗺𝗼𝗻𝘀𝘁𝗿𝗮𝘁𝗶𝗼𝗻 𝗺𝗼𝗱𝗲𝗹): This CMM is in near-new condition. The machine has only been used as a demonstration model and therefore has seen very little use. There is no production wear, meaning the system is in absolute top condition, both mechanically and electronically. 𝗛𝗶𝗴𝗵 𝗽𝗿𝗼𝗱𝘂𝗰𝘁𝗶𝘃𝗶𝘁𝘆 𝘁𝗵𝗿𝗼𝘂𝗴𝗵 𝘁𝗵𝗲 𝗣𝗛𝟮𝟬 𝗺𝗲𝗮𝘀𝘂𝗿𝗶𝗻𝗴 𝗵𝗲𝗮𝗱: The machine uses the advanced Renishaw PH20 probe head. This head uses ‘head touches’ (fast pivoting movements of the head itself) instead of moving the entire machine axes. This results in a measuring cycle that is up to three times shorter compared to traditional systems. Blsdpfx Aez Eh T Remrsn 𝗛𝗶𝗴𝗵 𝘁𝗵𝗲𝗿𝗺𝗮𝗹 𝘀𝘁𝗮𝗯𝗶𝗹𝗶𝘁𝘆 (𝟭𝟲 - 𝟮𝟲 °𝗖): Thanks to the optional multi-sensor temperature compensation system, the machine maintains its accuracy over a wide temperature range. This makes the CMM suitable for use near the production line without requiring a strictly temperature-controlled environment. 𝗗𝘂𝗿𝗮𝗯𝗹𝗲 𝗮𝗻𝗱 𝘀𝘁𝗮𝗯𝗹𝗲 𝗳𝗼𝘂𝗻𝗱𝗮𝘁𝗶𝗼𝗻: The machine bed consists of a solid granite table with integrated guides (flatness according to DIN876/III). Because all axes are equipped with air bearings, there is no mechanical friction or wear, which guarantees long-term repeatability. 𝗖𝗼𝗺𝗽𝗮𝗰𝘁 𝗮𝗻𝗱 𝗲𝗿𝗴𝗼𝗻𝗼𝗺𝗶𝗰 𝗱𝗲𝘀𝗶𝗴𝗻: The CNC controller and the PC are integrated into the machine's base. This saves valuable floor space in your workshop or measuring room. The monitor and keyboard are mounted on a flexible, pivoting operator arm. 𝗠𝗲𝗮𝘀𝘂𝗿𝗶𝗻𝗴 𝗿𝗮𝗻𝗴𝗲 𝗮𝗻𝗱 𝗰𝗮𝗽𝗮𝗰𝗶𝘁𝘆: The effective measuring volume is 600 mm on the X-axis, 500 mm on the Y-axis, and 470 mm on the Z-axis (reduced from 500 to 470 mm due to the physical design of the PH20 head). The robust granite table is designed to support heavy workpieces with a maximum product weight of up to 300 kg. 𝗛𝗶𝗴𝗵 𝘁𝗿𝗮𝘃𝗲𝗿𝘀𝗲 𝘀𝗽𝗲𝗲𝗱 𝗮𝗻𝗱 𝗱𝘆𝗻𝗮𝗺𝗶𝗰𝘀: The machine is equipped with a powerful NC drive via DC motors with backlash-free friction drive on steel guides for all axes. This results in an impressive maximum positioning speed of 30,000 mm/min (500 mm/s) and a maximum acceleration of 1500 mm/s², allowing measuring programs to be executed with minimal pauses. 𝗖𝗲𝗿𝘁𝗶𝗳𝗶𝗲𝗱 𝗺𝗲𝗮𝘀𝘂𝗿𝗶𝗻𝗴 𝗮𝗰𝗰𝘂𝗿𝗮𝗰𝘆: The machine's performance has been fully verified according to the strict international UNI EN ISO 10360-2 standard. With the PH20 measuring head, the system guarantees a path measuring accuracy (MPE) of 2.7 + 3.0L/1000 µm under optimal conditions (18-22 °C), and a maximum repeatability accuracy (MPL) of 2.5 µm. The maximum form measuring error of the probe (MPE PFTU) is 2.7 µm. 𝗜𝗻𝘀𝘁𝗮𝗹𝗹𝗮𝘁𝗶𝗼𝗻 𝗮𝗻𝗱 𝗰𝗼𝗻𝗻𝗲𝗰𝘁𝗶𝗼𝗻 𝗿𝗲𝗾𝘂𝗶𝗿𝗲𝗺𝗲𝗻𝘁𝘀: For the commissioning of this CMM, a stable compressed air supply is required with a minimum pressure of 5 Bar (71 PSI) and a constant air consumption of 90 Nl/min. The electrical installation is very simple and requires a standard single-phase power supply of 230 V (±10%) at 50 Hz. The total machine weight, including the base, is 435 kg (excluding PC peripherals).

Year of construction: 2018, condition: ready for operation (used), - USED - 5-AXIS BRIDGE-TYPE CNC MILLING MACHINE LONGITUDINAL TRAVEL: 2500 mm TRANSVERSAL TRAVEL: 3500 mm VERTICAL TRAVEL: 1300 mm RAPID FEEDS L-T-V: 40 m/min TABLE SIZE: 3500 x 2500 mm HEAD: A/B AXIS AUTOMATIC ; A-axis ±185° - B-axis ±270° ; HSK A100 ; 12000 rpm TOOL MAGAZINE: CHAIN-TYPE ; 64 POS CONTROL UNIT: HEIDENHAIN TNC640 WEIGHT: 51370 Kg ACCESSORIES: HIGH PRESSURE COOLANT ; SWARF CONVEYOR ; LASER TOOL SETTER ; PAPER FILTER ; Blodpfx Amjwla Hneron TOUCH PROBE ; PORTABLE HANDWHEEL

Condition: used, Year of construction: 2010, functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, total height: 1,680 mm, type of input current: AC, total width: 740 mm, input voltage: 230 V, table length: 750 mm, Equipment: type plate available, We offer this used Werth Easyscope 300x200x200/VID/TP 3D CNC coordinate measuring machine, manufactured in 2010. Type: Easyscope 300x200x200/VID/TP 3D CNC Year of manufacture: 2010 Voltage: 230 V AC Current: max. 10 A Frequency: 50 Hz Serial number: 10-00012 Blodpfjz Ditvex Amrsn Measuring range as indicated: 300 × 200 × 200 mm Control: CNC Measurement: 3D System: vision system + measuring probe Measuring table: glass Manual control: panel with joystick Connectors visible on the device: Video / Motor / Scale / Probe Safety / emergency switch Control computer visible in the pictures The machine can be used in quality control, tool rooms, metrology departments, measuring laboratories, and for the inspection of precision manufactured parts. Inspection of the device is possible by prior arrangement. The device has been used sparingly and has not been calibrated since 2029. If you have any questions or require further information, please send a message or contact us by phone.

Condition: good (used), measuring range X-axis: 505 mm, measuring range Y-axis: 405 mm, measuring range Z-axis: 4,058 mm, workpiece weight (max.): 100 kg, total height: 2,185 mm, total width: 1,082 mm, total length: 1,054 mm, travel distance X-axis: 505 mm, travel distance Y-axis: 405 mm, travel distance Z-axis: 405 mm, overall weight: 515 kg, input voltage: 230 V, travel speed (max.): 25,800 mm/min, table load: 100 kg, compressed air connection: 5 bar, ambient temperature (max.): 26 °C, ambient temperature (min.): 16 °C, Equipment: type plate available, Mitutoyo Euro-C Apex544 CNC 3D CMM. An excellent 3D CNC CMM at a very attractive price. Three-dimensional measurement with accuracy within three micrometers! A well-maintained Mitutoyo Euro-C Apex544 3D Coordinate Measuring Machine. In very good condition. Fully compliant with specifications. Measuring range: X-axis 505 mm Y-axis 405 mm Z-axis 405 mm Specification ISO 10360-2 MPEE = [2.9 + 4.0L/1000] µm (at a temperature of 16–26°C) Resolution 0.0001 mm. CNC speed 430 mm/sec. Maximum acceleration 0.17 g Workpiece load capacity up to 100 kg Height 219 cm Width 109 cm Length 106 cm Air-bearing axes (5 bar supply) Operates on 230V power to the controller (the CMM itself runs on low voltage). Euro-C Apex544 (PH1 + TP20). Standard joystick. Desktop PC with Windows 11 Pro (English). 24-inch monitor. Mouse & keyboard. MCOSMOS v3.0 Available upgrades: PH10T/M + PHC10-2. TP200 + PI200-2 SCR200 + 6 STD modules. MCOSMOS version of your choice (subject to stock). Dual joystick. (On-site training within the Benelux region). Sales prices exclude: transport, installation, calibration, and measurement certificate. Can be viewed in operation/demonstrated in the Netherlands by appointment. Within the Netherlands, transport and installation will be provided free of charge (calibration is not included, but is available as an option). Bljdpfx Ajzz Rc Asmren

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Equipment: documentation/manual, type plate available, Taylor Hobson Talyrond 265 roundness measuring instrument. Extremely accurate; it can measure the roundness of lenses, optics, pistons, turbine components, tubes, shafts, and also eccentricity, e.g., of cams on a camshaft or journals of a crankshaft. It is certainly of interest for motorsport and tuning companies. The first photo is a "representative image" from a Taylor Hobson catalog, showing how it is constructed, except for the computer, which is a newer, more modern HP model with a small form factor. Max. diameter 350 mm Max. test piece height 500 mm (higher values are possible by measuring in two parts, up to a maximum of 1000 mm...) Self-centering of the workpiece +/- 5 mm Max. weight of test piece 40 kg The system has been used very little and has had only two owners. The first owner, from whom I bought it, was an implant company in Hamburg; it was used in a "medically clean environment" and is extremely clean. It was never located in a dirty machine hall. The year of manufacture is estimated to be between 2003 and 2005. The Taylor-Hobson measurement software is, of course, included and runs on the supplied HP computer (without a password...). It is also on the USB stick, perhaps for installation on another machine at your location. Accessories are included: the original Taylor-Hobson desk, computer, monitor, seven (7!) measuring probes, each of which is very expensive to purchase. A sample/sample lens (hemisphere) is included for calibration! The very detailed operating manual is on the USB stick, and all circuit diagrams and functional diagrams are also included! The system will be shipped on two Euro pallets via a freight carrier. It is already well secured on them. The Talyrond 265 and the desk will be wrapped with bubble wrap, etc., and secured with stretch film to provide extreme protection during transport. The system itself is fixed with "transport safety screws." Bsdpezcqy Eefx Amrjln Shipping is at the buyer's expense and will be on two Euro pallets. The measuring system should definitely be assembled and put into operation by a Taylor Hobson service technician, who can then also recalibrate the system on-site. This is now recommended after a few years. Errors can be made during assembly and commissioning. For example, some locking screws are installed for transport, and if you forget them, the system could be damaged when starting up. A truly well-maintained, very accurate system that will continue to provide excellent service for many years to come!

Condition: used, Year of construction: 1999, Measuring machine, coordinate measuring machine, form tester -Handover: in current condition as viewed -Calculator missing, x-axis damaged (Carriage guide defective) -Manufacturer:Mahr, form tester type MMQ 40 -Measuring height: 490 mm Bledpeua Nl Eofx Amron -Technical data: see photos documentation -Accessories: incl. calibration and measuring accessories / technical documentation, see photos -Dimensions: 700/450/H900 mm -Total weight: 218 kg

Condition: reconditioned (used), Year of construction: 2026, operating hours: 12 h, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 200 mm, warranty duration: 12 months, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 200 mm, feed length X-axis: 400 mm, feed length Y-axis: 400 mm, feed length Z-axis: 200 mm, year of last overhaul: 2025, Equipment: documentation/manual, lighting, type plate available, Mahr Multiscope 442 Multisensor Measuring System equipped with camera, laser, Renishaw probing system, and Hexagon Vision 3D software (upgrade to Windows 11 and OptiCheck3D 2025 possible) Complete maintenance history available Factory-refurbished premium multisensor measuring center with warranty and guarantee, rebuilt in 2025. Delivery via factory service or forwarding agent, worldwide. Online or optional on-site demonstrations with customer parts, application-specific consultation by accredited Profitech metrology laboratories during project planning. Comprehensive service: – Delivery, installation, commissioning, accuracy verification to standard, certification, and extensive acceptance documentation. Individual training and education programs also available as online courses. Rental, hire-purchase, or financing available directly through Profitech without a financial institution. Measuring system can be individually configured to customer requirements. Measuring range for all sensors: 400x400x200 mm Dimensions: 800x1000x2000 mm Blsdpfx Amexufk Usron Weight: approx. 800 kg Maximum load (glass plate): 30 kg Accuracies: U1=1.9 + L/200; U2=2.4 + L/150; U3=2.9 + L/100 (L = measuring length in mm) Max. traverse speed: 250 mm/s Including camera Including rotary table Including laser Including LED ring light Including new frame grabber Including dual-monitor operation Including CNC control and PC Including Hexagon Vision3D software

Condition: good (used), Year of construction: 2016, CNC Portal flame cutting machine Manufacturer: Sato Type: Satronik D5765 Manufacture: 2016 CNC control: Satocontrol CNC 3010 Track width: 5.750 mm Bljdpfxogqkc Ns Amron 6 x oxyfuel torche without tracks without table without filter

Condition: good (used), Year of construction: 2008, Hydraulically Height-Adjustable Pallet Truck from Witte - Alufix for loading coordinate measuring machines With Hovercraft Air Bearing Plate Pallet truck with hydraulic height adjustment from approx. 660 mm to 950 mm. Table top coated with a roller on the broad side for bridging height differences between the table and measuring plate. Internal dimensions approx. 900 x 700 mm. Eurofix air bearing plate with handle and integrated air valve for easy movement and positioning of heavy workpieces on coordinate measuring machines. The surface is equipped with 50 mm grid pattern boreholes. The holes have a diameter of 12.5 mm, a depth of 7 mm, and M6 threaded inserts at the base. The air supply can be activated via the valve integrated in the handle, allowing the entire plate with the mounted measuring object to be moved very easily. Usable area (aluminum) is approx. 600 x 600 mm. Ideal for Witte Alufix clamping systems for fixture construction in the automotive sector, etc. Dimensions approx. 1000 x 800 x 660/950 mm (LxWxH). Weight approx. 100 kg. Bjdpfxow Nylkj Amrjln The machine can be demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse. See "more offers from this supplier."

Condition: used, Year of construction: 1999, total length: 13,000 mm, total width: 7,000 mm, total height: 6,000 mm, overall weight: 120,000 kg, spindle motor power: 50,000 W, HEYLIGENSTAEDT HEYMUNILL 3200-P in heavy-duty portal design with fixed crossrail, suitable for machining large and heavy workpieces. Large working area with travels of X 6,000 mm / Y 5,000 mm / Z 1,500 mm, as well as a table size of approx. 5,000 x 3,000 mm and a table load capacity of approx. 50,000 kg. Portal clearance approx. 3,220 mm width / 2,050 mm height. 5-axis machining / milling heads A- and B-axis (swivel axes in the milling head) C-axis (360° rotation) Simultaneous 5-axis machining possible (with fork head) Milling heads: Straight milling head FK 120/340 90° angle head WFK 100/750M Fork head FK 100/2D Milling head magazine: 5 positions Automatic milling head change Additional equipment: Internal cooling (IKZ) approx. 7 bar Tool changer 32 positions (SK50, Fibro ATC 32/50) Tool holder SK50 (DIN 69871) Tool measuring system (laser) Chip conveyor Coolant system Adaptive feed control Heidenhain linear scales X/Y/Z Spindle performance: 50 kW Control: Heidenhain TNC 430 Spindle speed: 5000 - rpm Travel Y-axis: 5000 - mm Dimensions (LxWxH) approx.: 13000 x 7000 x 6000 mm Weight approx.: 120,000 kg Travel Z-axis: 1500 - mm Travel X-axis: 6000 - mm Year of construction: 1,999 Condition: unchecked Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation Bsdpfey Anrtox Amrsln under power: Yes

Condition: good (used), Year of construction: 2008, CNC gantry plasma cutting machine Manufacturer: Messer Type: Multitherm 4000 CNC control: Global Control Plus Year of manufacture: 2008 Retrofit: 2019 Blsdpfjiff Dasx Amrsn Extraction table: 2,000 x 3,000 mm 1 oxy-fuel torch ALFA 1 plasma torch Power source: Kjellberg HiFocus 280i Filter system: Z-Line 9 ZDC We have our own technicians available for installation, commissioning, and training! All spare parts are in stock. 28926

Condition: good (used), Year of construction: 2008, Mitutoyo CRYSTA-PLUS M544 (manuelles Koordinatenmessgerät) Baujahr: 2008 Zustand: einsatzbereit nach Inbetriebnahme durch Mitutoyo Schweiz Transport: vorbereitet / Transportsicherung durch Mitutoyo Schweiz Funktionsfähigkeit: voll funktionsfähig Messbereich X-Achse: 400 mm Messbereich Y-Achse: 500 mm Messbereich Z-Achse: 400 mm Genauigkeit: E = 3.5 + 0.45L/100 (µm) Referenzkugel: Keramik Bodpfx Amoz H Uzqorjln Feinjustierung: für X-, Y- und Z-Achse Anmerkungen: Manuell indexierbarer Dreh-/Schwenkkopf MH20i mit integrierter TP20 Tastermodulaufnahme, 168 Positionen wählbar

Condition: like new (used), Year of construction: 2024, operating hours: 100 h, functionality: fully functional, warranty duration: 3 months, type of input current: AC, overall weight: 14 kg, input voltage: 230 V, repeat accuracy: 0.025 mm, Equipment: documentation/manual, lighting, type plate available, AT960 SR Laser tracker with All accessories and T Probe as good as new Bljdpoz D D Tqjfx Amron

Condition: ready for operation (used), Helios Preisser length measuring machine, measuring machine, measuring device with camera system Length x width: 1350mm x 270mm Accuracy class: Grade 0 Flatness: Actual - 5.9 µ; target - 10 µ Weight: 109 kg PC, printer, camera system, keyboard, mouse. Digital display has been checked. You are welcome to visit us for an inspection. Bledpfxoiwxwhj Amron You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and view our other offers. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations in technical data and errors in the description of the item may occur and are subject to change.

Year of construction: 2013, condition: ready for operation (used), Portable 7-axis coordinate measuring system ROMER Infinite 1.0 SC 5028SC. Measuring range diameter: 2800mm, point repeatability: approx. +/-0.045mm - 0.050mm, volumetric length measurement uncertainty: approx. +/-0.064mm - 0.075mm, wireless communication: Wi-Fi 802.11b/g, battery operation, software base: WinRDS driver compatible with measurement software solutions PolyWorks, PC-DMIS, PowerInspect, Metrolog. Including integrated balancer, transport case, probe set 6mm, 15mm, tip, mounting plate with 3 magnets, calibration bar with calibration certificate. Inspection by appointment possible. Bodeyk Hcrspfx Amrsln

Condition: excellent (used), Year of construction: 2019, 3D coordinate measuring machine Control unit XM 1600 Measuring range on the table 200 x 200 x 200 mm Maximum measuring range 2000 x 1200 x 1000 mm Bsdoz Hfqvepfx Amrsln Accuracy: +/- 7µm Repeatability: +/- 3µm

Year of construction: 2005, condition: used, measuring range X-axis 650 mm measuring range Y-axis 700 mm measuring range Z-axis 500 mm Usable surface area of the granite slab 819 x 1.330 mm Max. workpiece weight 650 kg machine weight ab. 775 kg Machine dimensions approx. 1.380 x 1.160 x 2.429 mm Condition: Used Accessories, tools, and clamping devices shown are included in the scope of delivery Bedpfx Amoz Hqknsrsln only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: excellent (used), Year of construction: 2016, Zeiss Prismo 7/9/5 Navigator Co-Ordinate Measuring Machine (CMM) With MASS (Multi Application Sensor System) Bjdpfx Amsz E Rxiersln Measuring Range 'X'=700mm, 'Y'=900mm, 'Z'=500mm. Accuracy From 0.9 + L/350 µm. Temperature Range 19-22°C. Granite Table Dimension 1,200 x 830mm. Distance Between Columns 930mm. Height Under Bridge 725mm. With Vast-G-D2 Probe Scanning Head, Zeiss MCC800 Control, 5 Position Probe Rack, 5 Zeiss Styli, Joystick Control, Boxed Calibration Sphere, PC, Monitor, Keyboard, Mouse, CMM Accessories & Manuals. S/No. 197784 (2016).

Condition: ready for operation (used), Mahr Marshaft MAN 400 manual shaft measuring station, shaft measuring machine, measuring machine Mahr Marshaft MAN 400: Blsdpfx Amezmr D Esron Measuring range, length: 400 mm Year of manufacture: 2011 MarCheck: Mahr UTS 90-M: Mahr LTS 100: Mahr DMS 120 Year of manufacture: 2014 Year of manufacture: 2016 Year of manufacture: 2011 Year of manufacture: 2011 You are welcome to visit us for an inspection. We would be happy to arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, measuring range X-axis: 505 mm, measuring range Y-axis: 405 mm, measuring range Z-axis: 405 mm, Mitutoyo Crysta Apex C544 year of manufacture: 2006 x, y, z: 505 x 405 x 405 mm manual storage for measuring probes clamping plate calibration sphere Blsdpfx Amoy R A Apjrsn 5 x measuring probes Renishaw TP 200 PH 6M probe incl. computer, software, dongle, and documentation machine is powered up for inspection

Condition: excellent (used), Year of construction: 2003, table length 900 mm table width 900 mm x-travel 457 mm y-travel 508 mm z-travel 406 mm control Brown & Sharpe weight of the machine ca. 600 kg dimensions of the machine ca. 1300 x 1000 x 2400 mm Bsdpjx Szp Dofx Amreln