Used Construction Machine for sale (76,539)

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2007, operating hours: 3,963 h, For sale: a machine for bending and cutting reinforcing steel. Manufacturer: STEMA/PEDAX Model: Twinmaster 16x+ Year of manufacture: 2007 Hedpfxjzpx T Sj Agtsfl Operating hours: 3963 The machine has undergone a complete overhaul by a professional service provider. Included with the machine: - Straight bar table (6 meters long) - 2 unwinders Additional unwinders can be purchased – 4 units available – 5,000 euros/unit.

Condition: used, 2 x LTW channel lining Height: 1.50 meters Width: 3.00 meters Hfedpfxjz Ataye Agtjl Channel width: 90 - 140 cm

Condition: excellent (used), functionality: fully functional, empty load weight: 411 kg, digging bucket width: 1,750 mm, Year of construction: 2015, machine/vehicle number: 2015-2222, Cseri, German manufacturer, tiltable ditch cleaning bucket, MS 08 mount, capacity 360 liters. Hsdpfow Aguyex Agtefl

Condition: excellent (used), Year of construction: 1998, Hofmann HT 200 U frame dowel and elongated hole drilling machine with adjustable angle. Special drilling machine for staircase construction, window construction and universal applications through pneumatic height adjustment. Angled dowel drilling and picket drilling can be easily performed using the rotating drilling unit. Motor with pole change, two speeds Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm Motor start with a practical handle switch Precision chuck with two inserts, 16 mm and M10 thread Table size approx. 1100 x 240 mm Linear laser for precise positioning of the workpiece Drilling unit can be rotated 65 degrees to the left and right Pneumatic adjustment of the machining height, dowel drilling on two levels without retooling The desired drilling heights can be set for each drilling level using a handwheel and digital counter; switching then takes place pneumatically from the front Hfsdpfx Asyfta Tjgtjl Cross adjustment approx. 320 mm, stepless or in a 12 mm grid Drilling stroke approx. 200 mm 2 pneumatic workpiece clamps, can be positioned at the front and rear of the table 2 swiveling workpiece supports 2 side stops, can also be used as a front support Undercarriage Dust extraction connection 80 mm 4 used but good drills 9, 12, 16, 19 mm Few paint spots have been touched up, very good condition, see original photos. A used swiveling elongated hole drilling machine in this condition is rarely available. CE marking Operating manual Dimensions approx. 1200 x 1200 x 1200 mm (L x W x H), weight 310 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are stored in our warehouse, see "other offers from this supplier".

Condition: excellent (used), functionality: fully functional, overall weight: 24,000 kg, Year of construction: 2022, operating hours: 3,092 h, Gasparin GI5000R – Mobile screening plant on a tracked chassis Performance features Hfsdpezbrclofx Agtel Production capacity: approx. 400 t/h Hydraulically tilting screening box 93 kW (126 hp) 4-cylinder diesel engine, emission stage V Robust heavy-duty construction: Only the screening box vibrates, not the chassis or the conveyor belts Proportional valve with load-sensing system to optimize hydraulics and reduce fuel consumption by approx. 30% Easy loading onto a low-bed trailer thanks to the favorable chassis angle of 16° Technical data Screening unit Double-deck vibrating screen Vibrating screen with two decks Screen area: 4,000 x 1,400 mm Feed area Feed hopper: 6 m³ Folding side walls Conveyor belts Feed conveyor belt: 1,200 x 3,500 mm, adjustable speed Overflow conveyor belt: 1,200 x 5,000 mm, hydraulically folding, adjustable speed Discharge height: 3,420 mm Collection conveyor belt: 1,200 x 3,300 mm Conveyor belt for medium grain: 800 x 7,700 mm Hydraulically folding Discharge height: 3,530 mm Conveyor belt for fine grain: 800 x 7,700 mm Hydraulically folding Discharge height: 3,680 mm Drive 4-cylinder diesel engine with constant speed Power: 126 hp / 93 kW Emission standard: Stage V Further technical data Maximum feed particle size: 600 mm Operation via control panel Tracked chassis: 400 x 2,920 mm Operating weight: 24,000 kg Transport dimensions Transport length (with folded overflow conveyor belt): 11,730 mm Transport width: 2,550 mm Transport height: 3,200 mm

Year of construction: 2006, operating hours: 7,913 h, condition: used, Terex Pegson AX 877 E/M Trak jaw crusher, year of manufacture: 2006, operating hours: 7,913, engine: CAT [149 kW/200 hp], magnetic separator, 80% chain undercarriage, remote control, weight: 29,390 kg, German machine Hfsdpjzwluxofx Agtsl On request, we are happy to offer you a leasing or financing package. Mr. Mihm (phone) will be pleased to assist you. More information is available on our website. Errors and prior sale excepted! = Further Information = Please contact Tobias Ebert for more details.

Condition: new, Year of construction: 2025, Roll forming metal siding “double façade panel” machine SPM-2 Roll forming metal siding “double façade panel” machine SPM-2 is new design product of our company for façade and wall metal panels forming with the necessary configuration. These double façade panels are very popular in construction business of cladding residential buildings and industrial structures, for the construction of fences of various configurations, gazebos, roofing elements, etc. The SPM-2 metal siding production line is fully automatic and consists of a rolling part of the machine, an automation system and guillotine cutting shears at the machine exit. The line can have as additional parts a manual or automatic uncoiler for metal rolls, depending on the customer's needs. As standard version, this metal siding double façade panels roll forming machine SPM-2 makes a flat panel profile, but with the additional equipment, it is possible to roll panels with a microwave or rib shape profile. To start rolling, it is necessary to install a roll of metal to the decoiler and to put the end of the strip to the first rolling rollers of the equipment and feed it into them. After step by step, to put the metal to the next rollers, adjusting it if necessary. When metal comes to the cutting device of machine you need to feed metal into cutting knives and to make “zero” cut. After such step, equipment can move to automatic operation mode. The control panel of machine has the ability to set the number of tasks and the length of products, single tasks or to work in multitasking mode. After setting up necessary parameters the machine will automatically roll the metal cladding wall panels and cut them into necessary sizes. Thus, the customer will receive final product as quickly as possible and with the highest possible result. The roll forming speed is adjustable and can be up to 10-15 meters per minute. The SPM-2 metal wall cladding panels production line has special tools for punching out fastening holes on the side of the panel. Hfjdpfx Agoxghngotol It makes possible for the customer to get more interesting solution options and to offer a wider range of products to the end user. The rolling part of the machine has 18 pairs of forming steps, ensuring high quality of final product. You can get machine with protective cover or without it as per your request preferences. Specifications Material width (mm) 416 The material thickness (mm) 0,4-0,5 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15

Condition: used, Year of construction: 2001, Techmatic circulation system: - elevator - lowerator - finger car turning - 16 floors double pallet 1400x1100 - cuber - doubler Hsdpfsyylr Sex Agtjfl - center year 2001

Year of construction: 2020, operating hours: 1,133 h, condition: used, LIAB Grabenmeister GM4 tracked trench cutter, year of manufacture: 2020, hours: only 1,133, cutting width: 70-450 mm, cutting depth: 300-1,500 mm, engine: Doosan [57 kW/79 hp], hydraulic crawler drive, adjustable undercarriage, transport speed: 6 km/h, 300 mm steel track with rubber padding, weight 4,400 kg, length: 5,800 mm, width: 2,000 mm, height: 2,300 mm, in good condition!, ready for immediate use! Upon request, we will provide you with a leasing or financing offer. Mr. Mihm (Tel. ) will be happy to assist you. You can find further information on our website. Errors and prior sale excepted! Hfodpsy T Uvmofx Agtsl = Further Information = Please contact Tobias Ebert for more information.

Condition: like new (used), functionality: fully functional, For sale is an M18 Milwaukee demonstration set with full warranty. The Power SET consists of: Cordless percussion drill driver M18 FPD3-0X Cordless compact impact wrench 1/2" M18 FIW2F12-0X Cordless angle grinder M18 FSAG125X-0X Cordless circular saw M18 FCS552-0 Cordless reciprocating saw M18 FSZ-0 LED cordless hand lamp M18 TLED-0 Hjdpfx Aewzlwkjgtefl

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Hedoxxb Rrjpfx Agtjfl Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2019, XYZ UMC-5X 5 Axis CNC Vertical Machining Centre Heidenhain iTNC 640 HSCI Control Model UMC-5X Control Heidenhain iTNC 640 HSCI X Axis Travel 600 mm Y Axis Travel 600 mm Z Axis Travel 500 mm A Axis Travel +120° / -120° C Axis Travel 360° Table Size 600 mm Diameter Maximum Table Load 600 kg Spindle Speed 24,000 rpm Direct Drive Spindle Taper BBT40 Rapid Traverse 36 m/min Feed Rate 1 - 36,000 mm/min Tool Changer 60 Station Automatic Maximum Tool Length 300 mm Through Spindle Coolant 70 Bar Machine Weight 9,500 kg Machine Fitted With: Heidenhain iTNC 640 HSCI CNC Control, 24,000 rpm Direct Drive High Speed Spindle (20kW S6 Rated), 60 Station Automatic Tool Changer, 70 Bar Through Spindle Coolant, Fixed Roof for High Pressure Coolant System, Renishaw RMP600 Strain Gauge Wireless Workpiece Probe, Laser Tool Setting System, Kinematic High Accuracy Machine Setup, Kinematic Reference Ball, Thermal Spindle Compensation, Linear Scales on X, Y & Z Axes, Direct Drive C Axis Rotary Table, Swarf Conveyor & Bin. Features: Simultaneous 5 Axis Machining Centre, Gantry Frame Construction, Direct Drive High Torque Rotary Table, High Precision Linear Roller Guideways, Dynamic Collision Monitoring, High Accuracy Machine with Linear Scales, Ideal for Aerospace, Medical, Precision Engineering & Complex Multi-Sided Components. For sale with Jet Machinery Ltd Hsdpfszi Awhjx Agtsfl Jet Machinery Stock No: TBC Machine Serial Number: TBC Cost: £120,000.00 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to inspect the machine prior to purchase. Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Year of construction: 2010, condition: excellent (used), machine/vehicle number: 09942, Mercerizing machine No.: 09942 Year of production: 2010 Manufacturer: Goller Textilmaschinen GmbH Am Hammeranger 1 95126 Schwarzenbach/Saale GERMANY Hodpfx Aoyhn A Iegtsfl The machine is used for mercerizing cotton fabrics (knitted fabrics) with caustic soda solution in three stages: treatment with alkaline solution, washing (stabilization) and rinsing (neutralization).

Condition: refurbished (used), Lime Slaker Machine, GV-2, Continuous Lime Slaker, Quick Lime Slaker, Used Machine Manufacturer : Construction Machinery Enterprise - License Type : GV-2 Country of origin: Bulgaria Weight : 1,300 kg Capacity : Hfodozpxkqopfx Agtol For quick-slaking lime : 2 tonnes/hour For slow-slaking lime : 1.5 tonnes/hour Technical data : Drum speed : 10 rpm Electric motor : 8 kW, 68 rpm The machine structure and its components have been refurbished: Tank body and water jacket section, bearings, electric motor (new), machine frame. It has also received a new modern rotary joint on the water inlet side.

Year of construction: 2022, operating hours: 76 h, condition: used, Komplet Krokodile shredder, year of manufacture: 2022, operating hours: only 78h!, weight: 15,000kg, crawler undercarriage, throughput up to 200t/h, radio remote control, shaft length: 1,500mm, output material size: 60–150mm, magnetic separator belt, diesel engine: [160kW/220hp], in very good condition, immediately operational. Transport dimensions: Height: 2,290mm Width: 2,200mm Length: 6,900mm Hfsdpfx Aeyxknijgtsl Leasing or financing options available upon request. Mr. Mihm (phone) is happy to assist you. For further information, please visit our website. Subject to prior sale and errors. = Further information = Please contact Tobias Ebert for more details.

Year of construction: 2008, operating hours: 133 h, condition: used, JBM - Wood Chipper Type 630 MDX on Single-Axle Chassis / Car Trailer > Kubota diesel engine 44 kW (60 HP) > Sprung, braked single-axle chassis > Wide feed: 310 x 220 mm > Max. log diameter: up to 220 mm > Adjustable wood chip length: 0 – 25 mm > Weight approx. 1,690 kg > Only 133 hours! > Year of manufacture: 2008 Hsdpfx Ajzyf Htjgtefl On request, we can provide a leasing or financing offer. Mr. Mihm (phone) will be happy to assist you. Further information can be found on our website. Errors and prior sale excepted. = Further Information = Please contact Tobias Ebert for more details.

Condition: new, functionality: fully functional, fuel type: electric, Year of construction: 1999, Italian-made Mario Croci & Figli concrete pipe machine. In excellent condition (the machine is new and has never produced a single pipe). It is protected from the elements and stored in a dry warehouse. It produces pipes with a length of 2 and 2.5 meters and a diameter ranging from D30 to D120 cm. It comes with D300, D400, D500, and D600 molds, as well as rings. Located in Drama, Greece. An excellent deal!!! Hedpfx Agoza H U Tjtefl

Condition: used, Miter chop saw for aluminum (special machine construction with 4 servomotors) Circular saw, miter saw, crosscut saw Year of construction: 2002 Saw blade diameter: 500 mm Cutting range at 90°: Round Ø 180 Rectangle 350 x 140 mm (through crosscut) Cutting range at 45°: Round Ø 180 Rectangle 350 x 100 mm (through crosscut) Base carriage guide length: 1100 mm Travel on the base carriage (forward/backward): 650 mm Travel on the stand (up/down): 120 mm Saw blade speed: approx. 3000 rpm Motor power: 2.2 kW Power connection: 400 volts, 50 Hz - Controlled crosscut movement - Controlled saw blade height adjustment - Controlled miter cut through pivoting saw head - Controlled miter cut through tilting saw head - Pivoting and tilting of the saw via INDRAMAT servomotors with precision gearbox (Motor MKDO71B-061-KG1-KN and MKDO41B-144-KP1-KN) - Axis movement perpendicular via INDRAMAT servomotors and ball screw spindles (Motor MKDO41B-144-KP1-KN) - A total of 4 Indramat servomotors are installed - Very good German machine engineering Space requirement: L x W x H 1150 x 1100 x 1400 mm Weight: approx. 360 kg Hsdpsdzp T Djfx Agtjfl Good condition This unit comes from a special machine for specific products. All other components and electrical parts for the construction of a new special machine are also available.

Condition: used, functionality: limited functionality, Year of construction: 1990, Electric drilling rig. New electric motor. Hsdpey Skwqofx Agtofl

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Hedpjx D Tbmefx Agtefl Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Westtech Woodcracker G1650 Root Rake - New machine, in stock - Working width: 1650 mm - Own weight: approx. 1610 kg - Hydraulic flow rate: 50-90 l/min - Operating pressure: 200-250 bar - Carrier vehicle weight: approx. 20-25 t - 2x hydraulic gripping arms Hfsdpfxeyfrglj Agtsl - Optional: fine rake attachment Numerous adapter plates available on request. We are an official Westtech Woodcracker sales and service partner, Magni telescopic handler sales and service partner, JCB construction equipment dealer and service partner, Mercedes-Benz service partner, Iveco service partner, and with 800 used vehicles in stock, one of the largest commercial vehicle dealers in Germany. We supply the complete Westtech Woodcracker range! Rental possible = Further information = New: Yes Contact Tobias Ebert for further information.

Condition: used, Year of construction: 2012, machine/vehicle number: 51357, overall weight: 14,000 kg, No minimum price – guaranteed sale to the highest bidder! The machines are still assembled but disconnected from the power supply. An 11-ton forklift is available on-site for loading. Hodozy Ui Repfx Agtsfl For sale is a horizontal machining center manufactured by Samag, model: SM. TECHNICAL DETAILS Type of machining: Internal machining MACHINE DETAILS Total weight: 14,000 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, We offer 2 used screw pumps. Company: Montanbüro GmbH. Machine type: S5/7.5 kW. Year of construction 2017. Fully functional. Hedpfx Agjvdtagjtjfl

Condition: excellent (used), functionality: fully functional, fuel type: electric, color: green, operation weight: 9,000 kg, Year of construction: 1976, Description For sale is a well-maintained Schwarz & Wirtz PERFECT WE100 semi-automatic pipe bending machine—a robust and reliable solution renowned for its precision and long service life. The WE100 series is widely utilized in industrial fabrication, shipbuilding, construction, metalworking shops, and piping industries due to its strong bending capacity and dependable performance. This unit is in good working condition and has only operated in a professional workshop setting. All functions have been tested; the machine delivers precise bends even at maximum specifications. Included is a complete set of bending dies and mandrels (doorns) for both SCH40 and SCH80 pipes, making it ready for immediate production use. A demonstration video is available upon request. Technical Specifications Brand / Model: Schwarz & Wirtz PERFECT WE100 Machine Type: Semi-automatic pipe bending machine Maximum Pipe Diameter: DN100 Maximum Wall Thickness: 10 mm Drive / Power: Heavy-duty industrial-grade Bending Capability: Suitable for carbon steel piping, hydraulic piping, gas lines, and industrial tubing Operation: Semi-automatic operation with manual adjustments Condition: Mechanically sound, no functional faults detected Included Tooling (Dies & Mandrels – Complete Set) The machine is supplied with a full tooling package for both Schedule 40 and Schedule 80 pipe bending: Bending Dies + Mandrels (Doorns): - DN50 – SCH40 & SCH80 - DN65 – SCH40 & SCH80 - DN80 – SCH40 & SCH80 - DN100 – SCH40 & SCH80 Hodpexxkcdsfx Agtefl This comprehensive set greatly enhances the machine’s production flexibility and overall value. Highlights & Advantages ✔ Fully operational and tested ✔ Good mechanical condition ✔ Complete die & mandrel set included (rare and valuable) ✔ Heavy-duty bending capacity ✔ Suited for demanding industrial applications ✔ High-quality German manufactured build ✔ Ready for immediate deployment ✔ Operation video available on request Condition Report - Mechanically sound - No electrical issues - Hydraulics operating correctly - Bending accuracy verified - Normal signs of use, no major faults - Always operated indoors in a professional workshop environment

Condition: used, New: Yes Colour: Silver Applicable material: Bitumen Empty weight: 9.500 kg Cargo space capacity: 50.000 l Productivity: 50 tph = Additional options and accessories = - Originally painted - Tool box = Remarks = BITUMEN TANK (50 TONS) • Tanks capacity shall be 50 tons. Hfodpfsx D A R Dex Agtel • Tanks shall be produced in accordance with TSE and highway commission practices. • The tank shall incorporate a hot oil heating, • Seamless steel drawn pipe serpentine system to heat • The bitumentemperature up to mixer mixing temperature • The fuel tank shall incorporate level and heat indicator, suction nozzle, filling orifice, ventilation system, inspection hatch and drain outlet. • There shall be support legs under the tank and its surface shall be isolated with 50 mm rock wool and covered with 0,80 mm galvanized sheet. 1. HOT OIL GENERATOR • Generator capacity shall be 2 000.000 kcal/h. • The system shall be made according to diesel fuel system. • The generator shall incorporate a 1500 l filling tank. • The generator shall be horizontal, have seamless steel drawn hot oil pipe, double wall and circulation body. • Generator body shall be isolated with 100 mm rock wool and covered with aluminium sheet. • Generator system shall be produced according to manufacture standards and it shall incorporate an expansion tank, degasser, oil filter, valves and full automatic ignition controlled burner, control panel, pomp and necessary safety equipment. • The serpentine be made of min. 30 m2 seamless steel drawn pipe. • The generator shall be equipped with coupled warning system to protect the complete system in case of dangerous situations showing hot oil level or a decrease in heat transfer oil level. • The burner system shall be designed to activate automatically depending on the adjusted operation temperature of the heat transfer oil. • The system shall be produced in the form of a complete package.