CNC Portal Milling Machine

Fooke Endura 8 - 30/25/11,5/5-28

Condition: excellent (used), Make: HEYLIGENSTAEDT Type: NDC 710 / 1800 Control: R&D MTC3 4 Chuck 1400 mm Steady rest 3 units Ø 100-1050 Roller steady open 2 units Ø 1120 KNOLL Chip conveyor 2022 Boring bar Ø 260 x 3500 mm Boring bar Ø 200 x 1500 mm Boring bar Ø 150 x 1100 mm DBC Turning Length: 8250mm Swing over bed Ø: 1400mm Swing over cross slide Ø:1120mm Spindle power: 100kW Workpiece load: 16000 Length: 14000mm Duedpewzh A Ajfx Aiwet Width: 3500mm Height: 2900mm Weight: 32000kg

Condition: good (used), Year of construction: 1995, CNC cycle lathe MONFORTS KNC 6 year 1995 Control Monforts MTC K. Center distance : 2000 mm Max. turning diameter over bed : 630 mm Max. revolving diameter over plane support : 380 mm Spindle speed : 2 -1800 rpm Spindle motor : 21/15 Kw spindle bore : 71 mm 3-jaw chuck FORKARDT 400mm Djdpfx Aiehktd Nswout Tool holder Multifix size C with 3 tool pockets . Space requirement : Length 4000 mm Width2200 mm Height 1900 mm Weight.ca: 5000 Kg Complete machine documentation available. Machine can be demonstrated under current.

Condition: excellent (used), Year of construction: 2008, operating hours: 82,500 h, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,750 mm, feed rate X-axis: 65 m/min, feed rate Y-axis: 65 m/min, feed rate Z-axis: 65 m/min, spindle speed (max.): 20,000 rpm, rapid traverse X-axis: 65 m/min, rapid traverse Y-axis: 65 m/min, rapid traverse Z-axis: 65 m/min, torque: 63 Nm, overall weight: 90,000 kg, Equipment: rotational speed infinitely variable, First commissioning: 2008 Control system: Heidenhain iTNC 530 incl. HR420 handwheel X-axis: approx. 5,000 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,750 mm A-axis: -120 / +95° C-axis: ±360° Maximum workpiece dimensions 3,800 mm (X-direction) 1,800 mm (Y-direction) 1,150 mm (Z-direction) 5-axis machining is possible in a single setup with a 300 mm long tool (A-axis at 90° swivel). Machine operating hours: approx. 82,500 h Total spindle hours: approx. 36,500 h Clamping table No machine table is included in the delivery. However, we are happy to offer a customer-specific solution at extra cost. Dodpfx Aisxl R Hvjweut 2-axis fork-type milling head 5 Spindle power: 20 kW Spindle speed: max. 20,000 rpm Torque: max. 63 Nm Tool holder: HSK 63A Tool release: hydraulic Holding torque (clamped) A & C axis: 2,000 Nm Drives, linear axes Feed rate X, Y, and Z axis: up to 65 m/min Axis acceleration X, Y, and Z: up to 5 m/s² Connection data Voltage: 400 V Frequency: 50 Hz Power requirement: 130 kW Dimensions, weight Space required machine without peripherals: approx. 7,500 x 8,500 x 6,600 mm Total weight: approx. 90,000 kg Colour Enclosure, portal, control cabinet: RAL 7035 light grey Milling head and applications: RAL 5002 aquamarine blue Additional equipment - Minimum quantity lubrication - 50-fold tool changer - Work area enclosure Optionally available at extra cost: - Renishaw RMP60 probe - BLUM LaserControl NT mini Condition of the machine Fully functional, in very good condition. Can be inspected under power until April 2026.

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 11087, type of input current: AC, 2-disc fine grinding machine with accessories. good condition. with lifting unit. Complete documentation Dsdpfxoq Nitve Aiweut

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 119/020.0895, Manufacturing origin CH Voltage 400 V Netweight 4500 kg Custom position 8460.2320 Dimensions 2700x2350x2100 mm TECHNICAL DATA Control Fanuc 16i-T Center height 175 mm Distance between centers 1000 mm LINEAR AXES Grinding length 500 mm Strokes X : 267 mm Z : 650 mm WHEEL HEADSTOCK Continuous orientation +/- 8.5°. External grinding wheel size 500x80x203 mm Power 7.5 kW Speed 44 m/sec. WORKPIECE HEADSTOCK Taper type MT5 C-axis +/- 5 Power 1 kW Speed 30-1000 min-1 TAILSTOCK Taper type MT3 Sleeve stroke 35 mm Sleeve diameter Ø 50 mm Max. workpiece weight 130 kg POWER SUPPLY Voltage 400V 50 Hz errors and omissions excepted-data given without obligation Fully overhauled: Mechanics, geometry, hydraulics and electrical parts checked and/or replaced. Grinding headstock Disassembly, cleaning of parts, replacement of worn and defective parts, overhaul of motor, replacement of bearings, replacement of belts, disassembly of spindle, replacement of seals and O-Rings + adjustment. New paintwork. Headstock Dismantle, clean parts, replace worn and faulty parts, overhaul motor, replace belts. New spindle bearings. New paintwork. Djdpfxolbgfcj Aiwsut Tailstock Dismantled, checked and overhauled. Hydraulics Dismantle, check motor, replace hoses, defective and worn parts. Check hydraulic block X-axis Dismantle, replace worn parts such as O-Rings, seals, rings etc., overhaul hydraulic piston, grind tables. Z axis Dismantle, grind tables, replace worn and defective parts, overhaul hydraulic piston, new paintwork. Electrical cabinet Complete check, change various relays. Painting Colors: White RAL 9003 and gray RAL 7011 Geometry according to manufacturer's protocol. Inspection and cleaning of various accessories

Condition: used, machine/vehicle number: 1 284 066, Chuck Ø: 200 mm Bore through: 50 mm Mounting, short taper according to DIN 55027: size 6 outside-Ø of the clamping cylinder: 290 mm Overall height (clamping cylinder to chuck front without jaws): 150 mm pneumatically operated Dusdecm Tgkspfx Aiwot

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 9101, travel distance Y-axis: 4,600 mm, travel distance Z-axis: 1,600 mm, rotational speed (max.): 6,000 rpm, Equipment: rotational speed infinitely variable, Machine configuration: • PowerPortal4000 • 45° diagonal milling head (C 0.01° / A 0.01°) • Camera system integrated in SHW diagonal milling head • 4-point Hirth-type milling head interface • Heidenhain TNC 7 • HR 550 FS handwheel • Heidenhain optimization for 5-axis machining • X = freely selectable, Y = 4,600 mm, Z = 1,600 mm • ToolCenter with 90 tools • Coolant system 2,500 l Dedpfeygtnaex Aiwsut • Coolant pump 70 bar / 30 l/min • Coolant/air switching • Wash gun in the working area • Main drive 75 kW up to 6,000 rpm • Tool holder SK 50 BIG-PLUS • Panelling and grating • Double chip conveyor • SHW-UniScan • Sealing air • Operating mode 3 • Hexagon wireless probe • LED workspace lighting • Second camera in the working area

Condition: ready for operation (used), Year of construction: 1997, MODEL U.M. TG20/2500 CNC SIEMENS 840 C TURNING DIAMETER: 2500 mm TABLE DIAMETER: 2000 mm Dusdpsxwp D Defx Aiwet TURNING HEIGHT: 2000 mm MAX. WORKPIECE WEIGHT ON TABLE: 20000 kg MAX. TABLE SPEED: 2-250 rpm TOOL CHANGER: 10 pcs TABLE MOTOR: 60-100 kW C-AXIS RAM SECTION: 250x250 mm RAPID TRAVERSE: 10000 mm/min MILLING SPEED: 0-4000 rpm DRIVEN tools WEIGHT: 46000

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Studer S32 with Siemens 840 powerline control and Felsomat handling. Duedpfx Ajwa Im Esiwst 30-degree angled cut. Top condition. Machine can be inspected under power.

Condition: used, TECHNICAL DETAILS - Number of axes : 5 - Distance between tips : 400 [mm] - Effective diameter : 180 [mm] LINEAR AXES - X1 and X2 x Z travel : 220 [mm] - Z travel : 850 [mm] - X x Z resolution : 0.0001 [mm] TURRET : - Number of fixed positions : 12 - Tool holders : VDI30 WHEEL CARRIER - Right-hand external grinding : * Grinding wheel dimensions (Ø x width x bore) : 400 x 50 x 127 [mm] * Drive power : 6.8 [kW] WORKPIECE CARRIER - Max. speed : 7500 [rpm] Dusdpfx Aevxw A Ujiwjt - Speeds (synchronous operation) : 1 - 5000 [rpm] - Taper type : CM4 - Drive power : 10.5 [kW] - C axis : 0.001 [°] SYNCHRONIZED COUNTER SPINDLE - Max. speed : 7500 [rpm] - Rotational speeds (synchronous operation) : 1 - 5000 [rpm] - C axis : 0.001 [°] - Inner cone : MK4 - Micrometric adjustment : +/- 40 [microns] - Drive power : 10.5 [kW] POWER SUPPLY - Power rating : 45 [KVA] DIMENSIONS - Floor dimensions : 2800 x 3960 [mm] - Machine weight : 7600 [kg] MACHINE HOURS - Powered hours : 57000 [h] EQUIPMENT - NC FANUC 310i-modelA - Software Studer WIN - RS232 / USB interface - Remote electronic handwheel - Turret with Renishaw LP2 length self-calibration device - Marposs feelers for diameters (multirange) + Z4 axes for positioning - Semi-automatic wheel balancing MPM.3 BMT100 M.24 - 480 L coolant tank * with paper filter * with magnetic filter - Chip conveyor - Fog extraction - Cooling unit for grinding wheel motor cooling - Electronic contact detection Dittel AE6000 - Fixed dressing device on workhead - Electrical cabinet air conditioning - Balancing shaft - Interface for automatic loading system