Coordinate Measuring Machine

MITUTOYO EURO-M544

Condition: like new (used), functionality: fully functional, measuring range X-axis: 500 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 400 mm, warranty duration: 3 months, year of last overhaul: 2024, Fully retrofitted manual floating CMM Mitutoyo Euro M544 (originally built ´97) retrofit 2024 with DEVA electronic and Inspect 3D Inca Premium software Measuring ranges: x-axis 500 mm y-axis 400 mm Pedpfx Apsk Arxtodorc z-axis 400 mm Accuracy acc. ISO 10360 E = [3,5 + 4,0L/1000] µm at temperature range from 18 … 22 °C base material Granit Fixing holes M8 x 1,25 Scales Mitutoyo Linear Scales Scale resolution 0,0005 mm Electronic DEVA001 Probe Head Reniashaw MIH (used) Touch probe Renishaw TP20 (new) on demand: - Renishaw MH20i € 3.500,-- - Inspect3D Inca Premium latest version (plus € 4.000,--) - Aberlink 3D software (with free updates) € 1.500,-- - installation, calibration softwaretraining Incl. 3 month warranty within EU (excl. travel costs)

Condition: used, Year of construction: 1999, operating hours: 65,090 h, functionality: fully functional, ET365 GS with bar feeder and chip conveyor The machine is fully equipped - Collection tray - High-pressure pump - Control cabinet air-conditioning unit - Kupa loader - The machine was purchased from a running production operation and has been technically inspected - Geometry measured and all settings adjusted - Wearing parts replaced - All functions checked and adjusted as required Prsdpoycvaqjfx Apdjc The machine is fully operational and ready for immediate production The machine is available immediately

Condition: excellent (used), Year of construction: 2003, table length 900 mm table width 900 mm Predpfx Aex Szp Djpdoc x-travel 457 mm y-travel 508 mm z-travel 406 mm control Brown & Sharpe weight of the machine ca. 600 kg dimensions of the machine ca. 1300 x 1000 x 2400 mm

Condition: ready for operation (used), Year of construction: 1991, cutting diameter 220 mm Psdpexab R Uefx Apdorc capacity 90 degrees: square 220 x 220 mm turning speed range: 20 - 140 m/min saw band length 3720 x 34 x 1.1 mm height of material-table 825 mm coolant capacity 80.0 l feed length max. 600 mm total power requirement 2.5 / 3.5 kW weight of the machine ca. 1500 kg range L-W-H 2350 x 2050 x 1500 mm - in checked conditions - machinevideo - ?v=joc0EbemYC8 Equipment: - electro-hydraulic band saw - FULLY AUTOMATIC - for sawing hollow profiles and solid materials made of steel, stainless steel, . tool steel, non-ferrous metals and plastic - control panel on the front right * including button for manual operation (setup/individual cut) - electro-hydraulic material clamping - stepless cutting speed .. 20-140 m/min. - electro-motor chip conveyor - manual adjustment of the material feed range * via handwheel including analogue value display - automatic height adjustment of the saw frame * including device for material detection (start of cut) - coolant device

Condition: new, AVAILABLE FOR PURCHASE OR RENT Please read the technical specifications carefully. If the machine is a worthwhile investment for you, please provide your complete contact details, including a valid phone number and email address, so that we can prepare a quotation. Fiber Laser 30W Marking area: 200 x 200 mm Workpiece size max: WxHxD: 550 x 450 x 350 mm Laser type: Fiber 30 Watt Wavelength: 1064 mm Marking speed max. 7000 mm/sec Motorized Z-axis, height: 700 mm Repeatability/lens: +/- 0.001 mm Line thickness min. approx. 0.01 mm Power supply: 240 V/50 Hz Predpfx Ajru E Svepdoc External dimensions: 110 x 80 x 200 cm Front door: manual Includes software and PC Can be inspected on-site while powered Price net, plus VAT

Condition: ready for operation (used), Year of construction: 2025, operating hours: 1,351 h, controller manufacturer: FANUC, controller model: i Series iPlus, This 6-axis DN Solutions DNX 2100S Advanced was manufactured in 2025. It features a FANUC i-Series control, a 6-axis configuration including B and C axes, and a tool magazine with 60 positions. The machine offers full turn-mill capabilities, through-spindle coolant up to 70 bar, and a Renishaw probing system. Consider the opportunity to buy this DN Solutions DNX 2100S turn-mill centre. Contact us for more information about this machine. • Axes Configuration: 6 axes (X, Y, Z, B, C1, C2) • B-axis milling spindle (indexing accuracy 0.0001°) • Milling/Main Spindle: • Tool Interface: HSK-C63 • Max Speed: 12000 rpm • Power: 18.5 / 15 kW • Max Torque: 58 Nm • B-axis Travel: 240° (±120°) • Left Spindle: • Chuck Size: Ø255 mm (10") • Max Speed: 4000 rpm • Power: 22 / 15 kW • Max Torque: 456 Nm • Right (Sub) Spindle: • Chuck Size: Ø210 mm (8") • Max Speed: 5000 rpm • Power: 18.5 / 15 kW • Max Torque: 326 Nm • Tool Magazine: 60 positions • Features: Driven tools, Full turn-mill capability • Through-Spindle Coolant: 70 bar • Programmable Coolant Pressure (7 steps) • Coolant Through Opposite Spindle Predozv Ruuepfx Apdoc • Oil Skimmer • Chuck Washing • Work Area Washing: 4.5 bar • Coolant Level and Pressure Monitoring • Oil Mist Collector Preparation • Hinged Belt Chip Conveyor • Renishaw Probing System (Measuring Head Included) • Automatic Tool Measurement • Radio Tool Measurement System RMP60 • Manual Pulse Generator (MPG) • 3-Color Signal Tower

Year of construction: 2007, condition: ready for operation (used), Cutting range round: 560mm, cutting range flat (W x H): 620/560mm, material feed length, single: 900mm, multiple feed: 9999mm, shortest cut length: 6mm, minimum diameter to be cut: 15mm, minimum remnant in single cut: 15mm, shortest remnant length in automatic mode: 80mm, saw motor power, frequency-controlled: 5.5kW, cutting speed, stepless: 13-127m/min, saw blade dimensions: 7400/54/1.6mm, material support height: 700mm, total drive capacity in basic configuration: 12kW, length: 2370mm, width: 3610mm, overall dimensions with chip conveyor (L/W): 2370/3610mm, machine table height lowered: 2230mm, weight: approx. 5.2t with chip conveyor. An inspection on site is possible. Predpfjxg Rhvex Apdoc

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, workpiece weight (max.): 5 kg, total width: 360 mm, total length: 700 mm, Universal dynamic balancer for rotors from 10g - 5kg Pedeuh Svpopfx Apderc

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, REX RVF 327 | Vacuum filler with Busch pump Manufacturer: REX Technologie Ges.m.b.H. & Co. KG Model/Type: RVF 327 (RVF 327 F/P/A) Serial number: 2377091111 Year of manufacture: 2011 Power supply: 400 V / 50 Hz Current protection: 3x 16 A Rated power: 5 kW Dimensions: 1150 x 800 x 1200 mm Vacuum pump specifications: Pump manufacturer: Busch Model: KC 0016 E 320 Pump serial number: 1100558454 Pump year of manufacture: 2011 Vacuum capacity: 16 m³/h REX Technologie RVF 327 is a professional, extremely compact, and efficient rotary vacuum filler. This 2011 unit is the heart of a portioning line in small, medium, and large meat, fish, convenience food processing plants, as well as in the cheese and bakery industries. The machine is used for continuous, highly precise portioning, filling, and twisting of various types of fillings and masses. The use of an integrated, reliable German vacuum pump from Busch with a capacity of 16 m³/h allows for effective degassing of the filling before the filling process. As a result, the final product has a compact structure, and there are no air bubbles in the cross-section (which significantly increases the shelf life of the products), as well as perfect, consistent meat coloring. Key features and benefits: - Paddle-type filling transport system: The gentle, rotating mechanism ensures that the filling's structure is not crushed or smeared, which is crucial in the production of coarsely ground sausages, cabanossi, or burgers. - High-quality vacuum (Busch): The dedicated Busch KC pump ensures the optimal vacuum level in the loading chamber, providing stable operation even with thick and demanding masses. Podpfjy Ucikox Apdjrc - Versatility and flexibility: The RVF 327 model works perfectly with peripheral devices such as twisting mechanisms, casing holders, automatic clippers, or hanging systems. - Intuitive control: The machine is controlled by a microprocessor panel, which allows for precise programming of portion weight, pauses, twisting time, and correction of the first portion.

Year of construction: 1998, condition: ready for operation (used), Base machine CTX 200E with driven tools, C-axis and 1x back working. Includes DATAPILOT software package TurnPlus, cooling unit for control cabinet, hinge belt chip conveyor, discharge height: 1100mm including coolant tank, tool holder set for universal disc turret with tool holders for external machining, boring bar holders, tools with cylindrical shank holders, sealing plugs, reducing sleeves. Bar gripper, axial complete, workpiece pick-up device, tool spindles 3x axial for drilling/milling/tapping, 1x radial for drilling/milling/tapping, 1x for saw blades, collet chuck complete for main spindle, collet chuck complete for counter spindle, 17x DIN collets 173E round Ø 3-40mm, 2x DIN collets 173E, hex SW 7 and 12mm, 2x DIN collets 173E, square SW 8mm. Bar loading magazine IEMCA BOSS 542/32, guide channel set LW 13, additionally for IEMCA BOSS 542, 13x guide jaws for bar loading magazine IEMCA BOSS 542/32, Ø 8-41mm. With complete documentation. The machine has been idle for one year as the turret head is missing, no further defects known, operating hours unknown, without maintenance records. With bar loader and numerous tools. Podpsw Tl Ifsfx Apdsrc