Used Mitutoyo Coordinate Measuring Machine for sale (134)

Condition: used, Year of construction: 2014, x-axis 1.200 mm y-axis 3.000 mm z-axis 1.000 mm solution 0.0001 mm max. workpiece height 1.200 mm Nedpfxjxyaf Do Ahvjcp max. workpiece weight 3.000 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: good (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 46270311, total height: 2,400 mm, total width: 1,100 mm, total length: 1,200 mm, travel distance X-axis: 550 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 300 mm, overall weight: 1,500 kg, Equipment: documentation/manual, MITUTOYO CRYSTA-PLUS M 544 3D coordinate measuring machine Ncedpfjyvr Ekex Ahvop - incl. granite measuring plate - Plate dimensions: 880 x 830 x 160 mm - incl. gauge rings and documentation Note: The item must be definitively collected between 12.05. and 22.05.2026 on a mutually agreed date. FCA D-74821 Mosbach – loaded onto truck

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, Used Machine - Mitutoyo Crysta Apex C7106 Here I offer a very well-maintained 3-D coordinate measuring machine from the manufacturer Mitutoyo. The machine is built in 2004. The machine was used exclusively in an air-conditioned measuring room. It is a TOP equipped machine with which you can start immediately! Of course, we can also offer transport, setup and commissioning as well as calibration (factory or DAkkS) so that you do not have to worry about the individual items! Specifications see attached PDF. Nsdpfevpdhxjx Ahvecp Leasing possible. (All prices are NET)

Condition: good (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 0118507, measuring range X-axis: 500 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 400 mm, workpiece weight (max.): 100 kg, total height: 2,185 mm, total width: 1,062 mm, total length: 1,354 mm, input voltage: 230 V, compressed air connection: 6 bar, Used coordinate measuring machine Measuring range (X/Y/Z): 500 x 400 x 400 mm Measuring software: DOS-Geopak Probe system: Renishaw PH6 + TP2 Control unit: Mitutoyo UC 100 Accuracy: 3.0 + (0.4 * L / 100) Delivery, calibration and training can be offered as options. An upgrade to MCOSMOS Geopak with Windows 11 is also available. Ncjdpfxoywfras Ahvsp

Condition: good (used), Year of construction: 2005, functionality: fully functional, measuring range X-axis: 505 mm, measuring range Y-axis: 405 mm, measuring range Z-axis: 405 mm, workpiece weight (max.): 180 kg, total height: 2,200 mm, total width: 1,100 mm, total length: 1,100 mm, travel distance X-axis: 505 mm, travel distance Y-axis: 405 mm, travel distance Z-axis: 405 mm, overall weight: 520 kg, input voltage: 230 V, operating temperature: 1,626 °C, pressure: 4 bar, Very nice and visually appealing 3D CNC measuring machine at a very attractive price. Three-dimensional measuring within three microns! Fully meets its specifications. Inspection and demonstration are possible. Measuring range: X-axis 505 mm Y-axis 405 mm Z-axis 405 mm Specification ISO 10360-2 MPEE = [2.9 + 3.0L/1000] µm (at a temperature of 16 ... 26 °C). Resolution 0.0001 mm Nedpfxjywd Ele Ahvjcp CNC speed 520 mm/sec Maximum acceleration 0.23 g Can be loaded with workpieces up to 180 kg Height 220 cm Width 110 cm Length 115 cm Air-bearing axes (5 Bar supply) Operates on 230 Volt to controller (CMM itself is low-voltage) Includes PC, monitor, mouse/keyboard Software MCOSMOS-1 v3.0 (upgrade possible)

Condition: repair required (used), functionality: not functional, measuring range X-axis: 700 mm, measuring range Y-axis: 600 mm, measuring range Z-axis: 450 mm, Mitutoyo BH706 coordinate measuring machine. Mechanically in very good condition, it operated and performed high-precision measurements until the hard drive failure. The machine is being sold as non-functional, intended for refurbishment or upgrade. Note: The photos of the machine were taken when it was still operational. Currently, the machine is dismantled and packed for loading. Ncsdpoyvq Auofx Ahvep

Condition: like new (used), Year of construction: 2020, functionality: fully functional, measuring range X-axis: 905 mm, measuring range Y-axis: 1,005 mm, measuring range Z-axis: 805 mm, Buy your coordinate measuring machine from the leading specialist in CMMs with 30 years of experience – Kneissl-Messtechnik. With KNEISSL-Approved, you receive a pre-owned machine that has been thoroughly inspected, tested, and guaranteed ready for use – quality you can trust. General machine data: Machine type: CRYSTA-Apex V9108 Year of manufacture: 2020 Manufacturer: Mitutoyo Measuring range: 905 x 1005 x 805 mm Accessories: Probe head mount: PH10MQ Probe head: Renishaw SP25M with SM modules Ncsdpfxsyvit Ss Ahvjp Additional accessories: Ceramic calibration sphere, Windows 11 PC, 23" monitor, MCOSMOS 4.0 As specialists, we are happy to provide tailored advice to help you find the right machine for your measuring requirements. Worldwide delivery available upon request!

Condition: not inspected (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 400 mm, table width: 730 mm, table length: 1,170 mm, No reserve price – guaranteed sale to the highest bidder! Bidding obligates timely collection between 04.05.26 and 07.05.26. TECHNICAL DETAILS X-axis travel: 500 mm Nsdpfoyr H Drjx Ahvecp Y-axis travel: 650 mm Z-axis travel: 400 mm Table dimensions (L x W x H): 1,170 x 730 x 160 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,700 mm x 1,100 mm x 2,300 mm Machine weight: 900 kg EQUIPMENT Granite inspection plate Manual control Documentation and CDs External reference: Lot 9

Condition: good (used), Year of construction: 2012, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 250 mm, workpiece weight (max.): 40 kg, total height: 1,778 mm, total width: 1,027 mm, total length: 1,407 mm, overall weight: 579 kg, Immediately available. Nationwide delivery (Germany) within a maximum of 7 days after order. General machine data: Machine type: Quick Vision APEX QV-T1404 Year of manufacture: Mid 2012 Manufacturer: Mitutoyo Measuring range: 400 x 400 x 250 mm Control: Mitutoyo QV Remote Box Operating manual: Available Hardware and software equipment: PC/CPU: Brand new Monitor: Brand new Software: Mitutoyo QVPAK V13.2 Probe holder: Renishaw PH-6 with PI200-3 Probe: Renishaw TP200 Power supply: Mitutoyo Power Supply Unit 600 Additional accessories: Objectives - 02AKT250 1x & 02AKT300 2.5x This Mitutoyo Quick Vision Apex CNC from mid-2012 is designed for versatile measurement applications. Equipped with modern hardware and the latest Mitutoyo software, it offers high precision and reliability. The comprehensive range of accessories, including the Renishaw probe and calibration sphere, enables diverse measurement tasks. Ncedpew Hqx Rjfx Ahvjp Kneissl Messtechnik GmbH is a trusted partner of Mitutoyo. Thanks to our close cooperation, we can respond individually to customer requirements and make specific adaptations to the Mitutoyo Quick Vision Apex.

Condition: good (used), functionality: fully functional, Purchase your coordinate measuring machine from the largest CMM specialist with 30 years of experience – Kneissl Messtechnik. With KNEISSL-Approved, you receive a pre-owned machine that has been thoroughly inspected, tested, and is guaranteed ready for operation – quality you can trust. Machine Data Machine Type: CNC Crysta Apex C776 Manufacturer: Mitutoyo Measuring Range: 700 x 700 x 600 mm Controller: UC-200 Accessories Renishaw PH-10M Renishaw TP200 Ncsdexqnywepfx Ahvop Renishaw SCR200 Bilz vibration damping system Optional MRT320 rotary table As specialists, we are happy to provide you with individual consultation to find the right machine for your measurement requirements. Worldwide delivery available upon request! On request, we can also offer calibration or maintenance services. We are happy to advise you on all aspects of CMMs. If you are looking to sell your machine, do not hesitate to contact us. Leasing or hire purchase options are available by arrangement. We will find the right machine for you!

Condition: good (used), Year of construction: 2015, functionality: fully functional, measuring range X-axis: 905 mm, measuring range Y-axis: 1,005 mm, measuring range Z-axis: 805 mm, Purchase your coordinate measuring machine from the largest specialist for CMMs with 30 years of experience – Kneissl-Messtechnik. With KNEISSL-Approved, you receive a pre-owned machine that has been thoroughly inspected, tested, and is guaranteed ready for operation – quality you can trust. General machine data: Machine type: CRYSTA-Apex S9108 Year of manufacture: 2015 Manufacturer: Mitutoyo Measuring range: 905 x 1005 x 805 mm Accessories: Probe head interface: PH10MQ Probe head: Renishaw TP2000 Ncodpsyhmg Sofx Ahvsp Additional accessories: Ceramic calibration sphere, Windows 11 PC, 23" monitor, MCOSMOS 4.0 As specialists, we are happy to offer you personalized advice to find the right machine for your measurement requirements. Worldwide delivery available on request!

Condition: good (used), Year of construction: 2006, functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 1,600 mm, measuring range Z-axis: 800 mm, Buy your coordinate measuring machine (CMM) from the largest specialist for CMMs with 30 years of experience – Kneissl-Messtechnik. With KNEISSL-Approved, you receive a used machine that has been thoroughly inspected, tested, and is guaranteed ready for operation – quality you can trust. General machine data: Njdoxqnxaopfx Ahvecp Machine type: CRYSTA-Apex C9168 Year of manufacture: mid-2006 Manufacturer: Mitutoyo Measuring range: 900 x 1600 x 800 mm Controller: UC-200H Operation manual: available Accessories: Probe head mount: Renishaw PH10MQ Probe head: Renishaw TP200 Additional accessories: Ceramic calibration sphere Renishaw change rack 1 x SCR-200 We are happy to provide individual advice as specialists to find the right machine for your measuring task. Worldwide delivery available on request!

Condition: good (used), Year of construction: 2004, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, Purchase your coordinate measuring machine from the leading specialist for CMMs with 30 years of experience – Kneissl-Messtechnik. With KNEISSL-Approved, you receive a used machine that has been thoroughly checked, tested, and is guaranteed ready for operation – quality you can trust. General machine data: Machine type: Crysta Apex 7106 Year of manufacture: 2004 Manufacturer: Mitutoyo Measuring range: 700 x 1000 x 600 mm Accessories: Probe head mount: PH10MQ Probe: Renishaw TP 200 Renishaw Additional accessories: Ceramic calibration sphere, Windows 11 PC, MCOSMOS 4.0, calibration sphere Ncjdpsyg Nl Ujfx Ahvjp We are happy to provide tailored advice as specialists to help you find the right machine for your measurement tasks. Worldwide delivery available on request!

Condition: good (used), Year of construction: 2004, functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, Buy your coordinate measuring machine from the leading specialist for CMMs with 30 years of experience – Kneissl-Messtechnik. With KNEISSL-Approved, you receive a pre-owned machine that has been thoroughly inspected, tested, and is guaranteed ready for operation – quality you can trust. General machine data: Machine type: Crysta Apex 9106 Year of manufacture: 2004 Manufacturer: Mitutoyo Measuring range: 900 x 1000 x 600 mm Accessories: Probe head mount: PH10MQ Probe head: Renishaw TP 2000 Nsdpjyg Irysfx Ahvecp Additional accessories: Ceramic calibration sphere, Windows 11 PC, 23" monitor, MCOSMOS 4.0 We are happy to provide individual consulting as specialists to help you find the right machine for your measurement task. Worldwide delivery available upon request!

Condition: good (used), Year of construction: 2004, functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 2,000 mm, measuring range Z-axis: 800 mm, Buy your coordinate measuring machine from the largest specialist for CMMs with 30 years of experience – Kneissl-Messtechnik. With KNEISSL-Approved, you receive a pre-owned machine that has been thoroughly inspected, tested, and is guaranteed ready for operation – quality you can trust. General machine data: Machine type: Crysta C Apex 9208 Year of manufacture: 2004 Manufacturer: Mitutoyo Measuring range: 900 x 2000 x 800 mm Accessories: Probe head mount: PH10MQ Probe head: Renishaw TP 2000 Additional accessories: Ncodpfx Aheyg Iy Dsvsp Ceramic calibration sphere, Windows 11 PC, 23" monitor, MCOSMOS 4.0 We are happy to provide individual consultation as specialists to help you find the right machine for your measurement task. Worldwide delivery available upon request!

Condition: good (used), Year of construction: 2004, functionality: fully functional, measuring range X-axis: 1,200 mm, measuring range Y-axis: 3,000 mm, measuring range Z-axis: 1,000 mm, Purchase your coordinate measuring machine from the largest specialist for CMMs with 30 years of experience – Kneissl-Messtechnik. With KNEISSL-Approved, you receive a pre-owned machine that has been inspected, tested, and guaranteed to be ready for operation from A to Z – quality you can trust. General machine data: Machine type: Crysta C Apex 123010 Year of manufacture: 2004 Manufacturer: Mitutoyo Measuring range: 1200 x 3000 x 1000 mm Accessories: Probe head mount: PH10MQ Nedjyg I Alepfx Ahvecp Probe: Renishaw TP 2000 Additional accessories: Calibration sphere (ceramic), Windows 11 PC, 23" monitor, MCOSMOS 4.0 We are happy to offer you expert advice as specialists to help you find the right machine for your measurement task. Worldwide delivery available on request!

Condition: good (used), Year of construction: 2005, functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 1,600 mm, measuring range Z-axis: 600 mm, Buy your coordinate measuring machine from the largest specialist for CMMs with 30 years of experience – Kneissl Messtechnik. With KNEISSL-Approved, you receive a used machine that has been checked, tested, and guaranteed to be ready for operation from A to Z – quality you can trust. General machine data: Machine type: Crysta Apex 9166 Year of manufacture: 2005 Manufacturer: Mitutoyo Measuring range: 900 x 1600 x 600 mm Accessories: Probe head mount: PH10MQ Probe head: Renishaw TP 2000 Additional accessories: Ceramic calibration sphere, Windows 11 PC, 23" monitor, MCOSMOS 4.0 Nsdpfxsyg Iubj Ahvocp We are happy to offer individual advice as specialists to help you find the right machine for your measurement application. Worldwide delivery available on request!

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: N93040010, measuring range X-axis: 700 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, workpiece weight (max.): 500 kg, type of input current: DC, overall weight: 2,500 kg, Equipment: documentation/manual, type plate available, For sale: fully operational and working coordinate measuring machine (CMM) from the renowned manufacturer Mitutoyo. Currently in use in the quality control department within the machining industry. Ready for immediate operation without the need for additional investment. Technical specifications: Year of manufacture: 1992 Serial number: N93040010 Design: bridge type Measuring range (X/Y/Z): 700 / 1000 / 600 mm Software: MCOSMOS 3.0 (license assigned to workstation) Computer included The machine operates in a controlled environment: 🌡 20°C ±0.5°C (air-conditioned metrology room) 🎯 Probe head and probing system: Renishaw PH10 head + spare PH10 Renishaw TP200 probe Mitutoyo probe rack – 6 positions (with a set of probes) Condition of heads and probes: very good Ideal configuration for precise measurement of machined components. 📋 Technical condition & documentation: Machine in continuous operation (quality control) Last calibration and service: 17.07.2025 Valid calibration certificate until 31.07.2026 (issued by an accredited calibration laboratory) Last service: complete replacement of pneumatic hoses (07.2025) Technical condition: very good The machine currently measures components requiring high precision. 📦 Additional equipment: Granite table Original documentation Njdpfx Ahjytccmjvscp Possibility to inspect the machine in operation Contact details for a trusted service and training provider can be provided 📍 Location & sale: The machine can be inspected by prior arrangement. Sale with VAT invoice. Price: negotiable.

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 22320321, total height: 2,300 mm, total width: 1,200 mm, total length: 1,300 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 300 mm, overall weight: 1,000 kg, Equipment: documentation/manual, MITUTOYO CRYSTA-PLUS M 574 coordinate measuring machine - incl. granite measuring plate - plate dimensions: 1200 x 840 mm - incl. documentation, calibration sphere, probe, and hardware Attention: The item must be definitively collected between 21.04. and 30.04.2026, on a date yet to be agreed upon. Nedpfx Aeym R S Nehvscp FCA D-96257 Marktgraitz – loaded on truck

Condition: used, Year of construction: 2012, x-travel 1600 mm y-travel 4000 mm z-travel 1200 mm Nodpoxcbhxofx Ahvocp workpiece weight 3500 kg

Condition: excellent (used), – Mitutoyo dial test indicator, model 513 454 – accuracy 0.01 mm – lever type (test indicator) – antimagnetic version – Made in Japan – Mitutoyo magnetic base – model 7011SN – ON/OFF lock – robust, stable, with precise clamping mechanism Ncodpow Rdi Aofx Ahvop – Made in Brazil – The set is fully functional. Stable guidance and precise readings. – Ideal for tool setup, run-out checking, and inspection measurements.

Condition: like new (used), functionality: fully functional, measuring range X-axis: 500 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 400 mm, warranty duration: 3 months, year of last overhaul: 2024, Fully retrofitted manual floating CMM Mitutoyo Euro M544 (originally built ´97) retrofit 2024 with DEVA electronic and Inspect 3D Inca Premium software Measuring ranges: x-axis 500 mm y-axis 400 mm z-axis 400 mm Accuracy acc. ISO 10360 E = [3,5 + 4,0L/1000] µm at temperature range from 18 … 22 °C base material Granit Fixing holes M8 x 1,25 Njdpfx Ahjk Arxtjvscp Scales Mitutoyo Linear Scales Scale resolution 0,0005 mm Electronic DEVA001 Probe Head Reniashaw MIH (used) Touch probe Renishaw TP20 (new) on demand: - Renishaw MH20i € 3.500,-- - Inspect3D Inca Premium latest version (plus € 4.000,--) - Aberlink 3D software (with free updates) € 1.500,-- - installation, calibration softwaretraining Incl. 3 month warranty within EU (excl. travel costs)

Condition: good (used), Mitutoyo 3D CNC Measuring Machine Manufacturer: Mitutoyo Model: BN706 Code No. 3700M-312 Type: Coordinate Measuring Machine Granite Measuring Plate Measuring Range: X-Axis: 700 mm Y-Axis: 600 mm Z-Axis: 600 mm Table Size: 850 x 1200 mm Dimensions: (W x L x H) 1600 x 1800 x 2600 mm Not Functionally Tested Financing through our bank is also possible. komplett-konzept.leasingo.de Ncedpsw Hda Iofx Ahvjp Find more items - new and used - in our shop! International shipping costs upon request!

Condition: as good as new (ex-display), Year of construction: 2018, functionality: fully functional, measuring range X-axis: 1,200 mm, measuring range Y-axis: 2,000 mm, measuring range Z-axis: 1,000 mm, warranty duration: 12 months, total height: 3,650 mm, type of input current: AC, total width: 2,200 mm, total length: 3,350 mm, overall weight: 6,100 kg, input voltage: 230 V, table load: 2,500 kg, We are selling our test and demonstration machine from our Solution Center. Further machines are available. Please feel free to contact us. Mitutoyo | CRYSTA Apex 122010 Coordinate Measuring Machine Coordinate measuring machine equipped with the latest Renishaw 5-axis technology, year of manufacture 2018. Nedpfxoyibp Uo Ahvocp Measuring range XYZ: 1200 x 2000 x 1000 mm Dimensions (XYZ): 2200 x 3350 x 3650 mm Max. workpiece weight: 2,500 kg Measurement uncertainty MPE (E0): 2.3 + 3.0 x L/1000 in µm Equipment: • Renishaw UCC S5 controller, SPA3 servo amplifier, MCU5-2 joystick, I++ server • Temperature compensation with workpiece sensor • Active damping • Renishaw REVO 5-axis measuring system for single-point and scanning, incl. RSP2, 1x RSH175, 2x RSH250, and RSP3-3 kit (3xSH) including all probe changers • Modus measurement software, latest version with STEP CAD import, including 1 year software maintenance • PC system with Windows 11, 2 x 27" TFT monitors NEW, including height-adjustable desk • Control cabinet with current safety technology • Base plate M6 (loading drawer optional - see pictures) Original price in 2018 plus VAT: €245,640.00 Machine sales and service only available within Germany! Optional service package available: Delivery to site (free to kerbside) | Commissioning | Inspection | Accuracy acceptance according to DIN ISO 10360 | Software training in Pliezhausen or Eitorf | Further options and accessories available upon request

Condition: ready for operation (used), Year of construction: 2000, A Mitutoyo CNC coordinate measuring machine calibrated at the end of 2024 is available. Measuring dimensions X/Y/Z: 705mm/705mm/60mm, traversing speed: 250mm/s, measuring speed: 1-3mm/s, acceleration: 980mm/s², resolution: 0.0005mm, table dimensions X/Y: 870mm/1320mm, max. workpiece height: 740mm, max. workpiece weight: 500kg. Machine dimensions X/Y/Z: approx. 1500mm/1550mm/2700mm, weight: approx. 1300kg, control: STATPAK in MCOSMOS-1 v4.2.R3. Documentation available. On-site inspection is possible. Expected to be available from the end of June 2025. Ncjdpfjwd S Unsx Ahvjp