Used Mechanical Press Brake for sale (43,024)

Condition: good (used), Year of construction: 2007, Marca: SCHIAVI Modelo: HFBs 100/ 3 Nominal capacity: 100 tons Table length: 3110 mm Work table width: 90 mm Working height without rise: 910 mm Maximum distance between tables: 450 mm Dodpfx Aexaz Igofnskg Maximum nominal stroke: 250 mm Gooseneck depth: 405 mm Distance between uprights: 2700 mm Maximum pressure: 303 MPa Oil capacity: 126 dm³ Maximum length (footprint): 4000 mm Motor power: 7.5 kW

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, Kingsland HACO ERMS 30 – 100 CNC Pressbrake Model: ERMS 30 – 100 Year: 2006 Control: ATS 560 Capacity: 100 Ton x 3100mm Max. Bending Length: 3100mm Distance Between Columns: 2550mm Dksdewwvx Depfx Afnjg Machine with: Light Guards Full length top and bottom tooling

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, operating hours: 17,400 h, control type: CNC control, actuation type: hydraulic, controller manufacturer: TRUMPF, controller model: TASC 6000, bending force (max.): 230 t, working width: 3,230 mm, stroke length: 445 mm, throat depth: 420 mm, distance between stands: 2,690 mm, installation height: 615 mm, operating speed: 10 mm/s, number of axes: 6, type of crowning: CNC-controlled, oil tank capacity: 330 l, travel distance X-axis: 600 mm, back gauge adjustment: CNC-controlled, back gauge: 860 mm, overall weight: 16,000 kg, total length: 4,270 mm, total width: 2,120 mm, total height: 3,200 mm, number of support arms: 2, Equipment: CE marking, angle measuring system, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, + 2 quick-adjustable support consoles on linear guides + 6-axis backgauge system (X1, X2, R1, R2, Z1, Z2) with control cabinet air conditioning + Hydraulic and hardened upper tool clamping + CNC-controlled crowning + Preparation for ACB + BendGuard safety device for 200 mm/s Standard equipment: - Four-cylinder upper drive concept - Electrohydraulic ram drive with proportional valve technology - Ram travel measurement system - Modern block hydraulics - Electronic pressure scale - Spherical suspension and inclination of the pressure beam - CNC backgauge system - Safe forward finger adjustment - 2 stop fingers - Self-centering, manual, hardened upper tool holder for vertical tool change - Hardened, hydraulic lower tool holder - Flat front cover - Modern safety guard Dodpfxox Elxvo Afnskg - CE mark - Oil cooler - Control cabinet cooling (air-air) - Operating manual

Condition: excellent (used), Year of construction: 2007, Technical Data: Working length: 2550 mm Frame width: 2150 mm Pressing force: 80 t CNC control: AMADA OPERATOR II graphic 14” color display Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Dedpfex Rh Anjx Afnjkg Motorized adjustable backgauge Stroke: 200 mm Throat depth: 420 mm Automatic crowning Working height: 960 mm Motor power: 7 kW CE marking Dimensions (L x W x H): approx. 3000 x 2250 x 2250 mm Weight: approx. 6 tons Accessories: Electronic angle measurement with automatic corrections LAN network connection 1 set of AMADA standard tooling The seller is not liable for typing or data transmission errors. The machine’s condition in terms of appearance, technology, and wear corresponds to its age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 2001, 3-Axis CNC Press Brake with HACO-Robosoft ATS 590 Graphic Control Manufacturer: HACO, Origin Belgium Model: ERMS 40135 Year of manufacture: 2001 / retrofit in 2008 with ATS 590 Technical data: Press force: 135 t Bending length: 4000 mm Features / Accessories: • 3-axis CNC control HACO ATS 590 Graphic (Y, X, and R axes for stroke depth and back gauge forward/backward + up/down) • Back gauge fingers adjustable together/apart manually • Manual table crowning by handwheel beneath the die with SIKO digital counter; also adjustable in the tool cassettes via wedge Dksdpfsx Npiysx Afnog Delivery time: 21.01.2026 ex location D-32425 Minden, loaded free on truck Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, functionality: fully functional, Hydraulic Press Brake Manufacturer: Promecam, Model RG - 104 Technical Details Brand: PROMECAM Model: RG - 104 Year of manufacture: Pressing force: 100 tonnes Bending length: 4,050 mm Throat depth: 410 mm Stroke: 100 mm Dimensions: L 4.25 x W 1.8 x H 2.50 m Weight: approx. 5.5 t Equipment - Amada tool holder - Large tool package as shown in photos - Manual back gauge Dedpfex Nnb Isx Afnjkg - Bending angle adjustment via handwheel All information without guarantee. A demonstration can be arranged at any time in our exhibition hall.

Condition: ready for operation (used), Year of construction: 2023, General Data Machine weight 1800 kg Measurements height 2200 mm Dimensions Machine Length 1440 mm Main Drive Number of axis 3 Pressing force 220 Kn This 3-axis Coastone Cone C9 press brake was manufactured in 2023. It features a C-frame design, a pressing force of 220 kN, and a maximum bending length of 900 mm. Equipped with an Omron Touchscreen TC15-2D CNC control and Amada Promecam tool clamping system, it ensures precision and ease of use. Located in Slovenia, it comes with a complete bending tool set and a 36-month warranty. Consider the opportunity to buy this Coastone Cone C9 press brake. Contact us for more information. Dkedsx I S Rwepfx Afnsg Application Types Bending

Condition: good (used), functionality: fully functional, Year of construction: 2005, Used 2-meter CNC press brake from Trumpf Model: V85 Dkodpfsx I N Awex Afnsg Capacity: 2050 x 85 tons Delem CNC control CNC-controlled Y1, Y2, X, and R axes Wila hydraulic upper clamping Year of manufacture: 2005 Without tools

Condition: excellent (used), Year of construction: 2017, operating hours: 3,200 h, pressing force: 130 t, Space requirement: 11,500 mm x 10,000 mm + Increased installation height/lift + 230 mm + 4-axis backgauge system + Rear work area lighting + Front work area lighting - TruBend documentation Automation BendMaster (60) Standard equipment: BendMaster - Sturdy base frame and manipulator made of cast aluminum construction - Load capacity 60 kg, sheet plus gripper - Low-level floor track in welded construction - Sheet sensor for contour detection - Rotary feedthrough for quick gripper change Gripper coupling on the BendMaster - Sensor system for 4-axis backgauge system - Electric drives - Double sheet detection - NC regrip station - Vacuum generation for suction grippers Control - TRUMPF PC control with operator terminal - Teleservice via internet - Convenient operation: screen, mouse, keyboard Safety - Safety fence with access door Special equipment Dkodpfx Afoxayl Denog + Track extension to 10 m + Gripper change console + Modular vacuum gripper without separation (materials for 3 grippers) + Modular vacuum gripper with separation (materials for 3 grippers) + Clamp gripper with rotary axis + Sheet removal station with linear axis + Additional pallet for sheet removal station + Right-hand side door for safety fence (or left-hand side in combination with ToolMaster) Machine - Robust machine frame entirely in steel construction - Press beam - Spherical mounting of pressure beam with inclined position - Electro-hydraulic upper drive system with 4-cylinder technology - Optical set-up and positioning assist with control valves - Generous free space for bending - Flat front covers - Block hydraulic system - Electronic pressure gauge - Measuring system with glass scale and spring-back compensation - Hydraulic oil in machine (lifetime lubrication) - Oil cooler - Electrical cabinet cooling via air-to-air heat exchanger - Modern machine design Backgauge System - 2-axis backgauge system, X and R axes Tool Clamping - Hydraulic upper tool clamping - Lower tool holder, hydraulic clamping, hardened - Lower tool displacement, 2 positions, pneumatic Crowning - CNC crowning Control - TRUMPF TASC 6000 - Graphical workshop programming - Windows XPe (embedded), Pentium 4 with 2.8 GHz clock speed - 2 GB RAM - 15-inch touch screen - Network capability - Teleservice via internet Operation - Control panel with LCD keypad and foot switch - Communication rail - MobilControl Safety - Standard safety equipment - CE marking

Condition: excellent (used), Model: DENER PUMA PX 30320 Dkjdpfxjxw U Rij Afneg Year of manufacture: 2021 Serial number: 12352 Bending length: 3050 mm Pressing force: 320 tons Maximum hydraulic pressure: 280 bar Main motor power: 30 kW Oil tank capacity: 400 l Weight: 14,300 kg

Year of construction: 2022, condition: new, - 14,2mx1000 ton capacity tandem press brake - The machine has been designed as a double TANDEM, primarily to provide ease of use and energy consumption. 2 x (7.1m-500 ton press brakes) - DELEM 66T controller, which manages the axes smoothly and is user-friendly, is preferred. -The THROAT DEPTH of the machine is 1000 mm and provides ease of bending without turning the sheet during the bending process. - It is possible to produce a single welded pole with a diameter of 500mm with a 1000mm DAYLIGHT and a long upper mold adapter. - There is a 2-axis BACK GAUGE in the machine. Thanks to the perfectly designed, stable, long-lasting X, R back gauge axes, higher quality bending will be achieved. - It is possible to obtain the same bending angle at every point of the machine with full-length MOTORIZED CROWNING for error-free bending results. - There is a LASER BENDING LINE for the operator's ease of use. - The machine is ready for tough production conditions with its reinforced bottom tools and front arms. Thanks to these specially strengthened tools, the machine has the ability to bend for many years under difficult production conditions. - All safety equipment (Leuze, Datalogic, etc.) in this machine is in compliance with CE norms. Dkedpjh I Tulefx Afnjg

Year of construction: 1971, condition: good (used), force 220 tons Dksdpfxem Sgv Eo Afneg working length 4 meters.

Condition: good (used), functionality: fully functional, Year of construction: 2011, working width: 1,300 mm, throat depth: 410 mm, distance between stands: 960 mm, operating speed: 20 mm/s, reverse speed: 20 mm/s, overall weight: 3,600 kg, total length: 2,740 mm, total width: 2,140 mm, total height: 2,317 mm, input voltage: 200 V, pressing force: 36 t, working length: 1,300 mm, CNC-controlled axes: Y1, Y2, X, R, Z1, Z2 Year of construction: 2011 Pressing force: 352 KN Table length: 1300 mm Bending length: 1300 mm Distance between uprights: 960 mm Frame depth: 410 mm Maximum stroke: 150 mm Opening: 420 mm Motor power: 200 V with transformer for 400 V Power: 13.2 kVA Total length: 2740 mm Total width: 2140 mm Total height: 2317 mm Machine weight: 3600 kg Dkodpfxjwgw Hho Afnjg

Condition: good (used), functionality: fully functional, Year of construction: 1990, Used 3 meter CNC press brake by Safan Model: DNCS 110 3100 Capacity: 3100 x 110 tons CNC controlled axes: Y1, Y2, X, R, Z1, and Z2 Manual crowning 1 set of tooling Upgraded ESA 630 CNC control New laser safety system Dkjdpex I Nzyofx Afnog

Condition: good (used), functionality: fully functional, Year of construction: 1997, installation height: 535 mm, pressing force: 85 t, Bending length [mm] 2050.00 Pressing force [t] 85 Control Delem DA 69 Operating hours [h] 76807 Dkedpfjwld R Dex Afnsg Standard equipment: - Upper drive concept in two-cylinder design Y1/Y2 - Electro-hydraulic ram drive in proportional valve technology - Ram travel measuring system with spring compensation via glass scales - Modern block hydraulics - Spherical suspension and inclination of the pressure beam - CNC back stop system - Safe finger adjustment from the front - Self-centering, manual, hardened upper tool holder for vertical tool change - Hardened, manual lower tool holder - Program-controlled lower tool displacement (I-axis) for 2 positions - Flat front cover - Modern protective cover + 6-axis back stop system + Hydraulic upper tool clamping + Hydraulic lower tool clamping

Condition: not inspected (used), Amada Astro 100 NT, HSD 1030 Dksdpfx Ajwa Siqefneg AVAILABLE FOR SPARES

Condition: new, functionality: fully functional, Year of construction: 2023, working width: 2,100 mm, throat depth: 300 mm, installation height: 470 mm, reverse speed: 205 mm/s, back gauge: 750 mm, back gauge speed R-axis: 500 mm/s, back gauge travel distance R-axis: 250 mm, back gauge travel distance Z-axis: 1,600 mm, overall weight: 8,000 kg, total length: 31,000 mm, total width: 24,000 mm, total height: 3,300 mm, power: 0.01 kW (0.01 HP), pressing force: 80 t, Equipment: safety light barrier, Electric press brake Hezinger-Pressline model PRCE08020 Press force 800 kN Working length 2,100 mm Passage 1600 mm throat 300 mm Stroke 270 mm Installation height 470 mm Infeed speed 190 mm/s Working speed 0-10 mm/s Retraction speed 205 mm/s Accuracy (Y) ± 0.01 mm Backgauge 600 mm Traversing speed 500 mm/s Accuracy ± 0.05 mm Motor power 10.0 kW Oil filling approx. n.a. Dsdoqvlrqspfx Afnekg Machine length approx. 3,100 mm Machine width approx. 2,400 mm Machine height approx. 3,300 mm Machine weight approx. 8,000 kg

Condition: excellent (used), Year of manufacture: 2005 Serial number: 8293 Press force: 120 t Bending length: 3100 mm Max. stroke: 260 mm Operating pressure: 240 bar Motor power: 11 kW Power supply: 400 V / 50 Hz / 3 phases Machine weight: 7,500 kg Machine dimensions (L x W x H): 3550 x 1800 x 2800 mm Dkjdpfx Afsxna S Honsg

Condition: excellent (used), Year of construction: 2003, Technical Data: Working length: 4230 mm Distance between uprights: 3650 mm Press force: 170 tons CNC control: AMADA Operator III graphic Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Motorized adjustable backgauge Stroke: 400 mm Automatic crowning Working height: 960 mm Motor power: 16.5 kW CE marking Dimensions (L x W x H): approx. 4700 x 2200 x 2900 mm Weight: approx. 14.8 tons Djdpfxsx N H Hcs Afnjkg Accessories: Automatic measurement of the bending angle of the workpiece with automatic correction in the control unit Side-mounted movable safety guards LAN network operation Infrared light barrier at the front and rear Condition: Very good condition, only 9,000 operating hours The seller accepts no liability for typographical or data transmission errors. The machine's visual, technical, and wear condition corresponds to its age; used machines are sold without any warranty.

Condition: used, functionality: fully functional, Year of construction: 2011, Used 3 meter CNC press brake Model: E Brake 100 3100 Capacity: 3100 x 100 tons Y1, Y2, X, R, Z1 and Z2 CNC controlled TS1 CNC control Year of manufacture: 2011 Wila hydraulic tool clamping Available directly from January 7 Djdpfxox I Nzgs Afnokg

Condition: good (used), functionality: fully functional, Year of construction: 1995, operating hours: 32,518 h, control type: CNC control, pressing force: 250 t, Bending length [mm]: 3550 Pressing force [t]: 250 Control: Cybelec DNC 906 PS A Operating hours [h]: 32,518 - Hydraulic quick clamping for punch and die - Hydraulic crowning system via CNC - 2-axis CNC backgauge (X and R) - 4 manually adjustable backgauge fingers - 2 movable bending aids Dodpfx Aoxcmwrefnjkg - Comprehensive tooling package

Condition: excellent (used), Technical data: Working length: 4100 mm Frame width: 3650 mm Press force: 220 t CNC Control: OPERATOR OPII graphic Color monitor size: 14" Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Motorized adjustable back gauge Dkodpfsx N Hw Iex Afnog Throat depth: 300 mm Stroke: 180 mm Automatic crowning Motor power: 17 kW Dimensions (L x W x H): approx. 4800 x 2300 x 2900 mm Weight: approx. 17 tons Accessories: New AMADA tools The seller assumes no liability for typographical or transmission errors. The machine’s appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2018, Very neat used press brake from Durma Type AD S 40320 Capacity 4050 x 320 tons Delem DA 69T control CNC-controlled axes: Y1, Y2, X1, X2, R1, R2, Z1, and Z2 (3D back gauge) Dodpjx I A Efsfx Afnekg Hydraulic Wila NS upper and lower clamping CNC crowning

Condition: good (used), functionality: fully functional, Year of construction: 2005, control type: CNC control, installation height: 615 mm, pressing force: 320 t, Bending length [mm] 4220.00 Press force [tons] 320 Dkedpfexxbr Asx Afnog Control unit TRUMPF TASC 6000 Hydraulic hours [h] 53,030 Standard equipment: - Rigid machine frame, all-steel welded construction - Press beam with high bending strength - Spherical mounting of the press beam with beam tilt capability - Electro-hydraulic top drive with 4-cylinder technology - Proportional valve technology and switchable double pump - Modern block hydraulics with control valves mounted on the cylinder - Electronic pressure scale - Measuring system with centrally mounted glass scales and temperature compensation - Manual, integrated wedge crowning in the bed - "New Standard Clamping" manual, hardened, self-centring upper tool clamping system for vertical tool change - Lower tool clamping with hydraulic clamping, hardened - Programmable lower tool displacement (pneumatic, 2 positions) - 2-axis backgauge system with rack-and-pinion drive for X and R axes, 2 stop fingers, safely adjustable from the front - Machine control: TASC 6000 - Operator console with LCD keypad, emergency up, down and E-stop foot switch - Safety features: integrated side doors and automatic rear roller cover - Control cabinet cooling - Oil cooler - Modern machine design + 5-axis backgauge system + Hydraulic upper tool clamping + CNC crowning + BendGuard + 2 support consoles + Park position + 1 bending aid + Additional foot switch

Condition: good (used), functionality: fully functional, Year of construction: 2018, Full-option CNC press brake from Durma Dksdpfox Ivnmex Afnog Model: AD S 40320 Capacity: 4100 x 320 tons Delem DA69 3D graphical control Y1, Y2, X1, X2, R1, R2, Z1 and Z2 CNC-controlled Wila hydraulic upper and lower clamping Wila crowning system Akas Fiessler laser safety Year of manufacture: 2018