Used Mechanical Press Brake for sale (47,033)

Condition: good (used), Year of construction: 2007, Marca: SCHIAVI Modelo: HFBs 100/ 3 Nominal capacity: 100 tons Table length: 3110 mm Work table width: 90 mm Working height without rise: 910 mm Maximum distance between tables: 450 mm Maximum nominal stroke: 250 mm Dkjdjxaz Igepfx Afzju Gooseneck depth: 405 mm Distance between uprights: 2700 mm Maximum pressure: 303 MPa Oil capacity: 126 dm³ Maximum length (footprint): 4000 mm Motor power: 7.5 kW

Condition: used, Year of construction: 2004, machine/vehicle number: P020504, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Delem, controller model: DA-66W, bending force (max.): 130 t, working width: 3,150 mm, bending length: 3,100 mm, stroke distance: 350 mm, throat depth: 500 mm, distance between stands: 2,600 mm, installation height: 550 mm, operating speed: 10 mm/s, number of axes: 6, table height: 950 mm, type of crowning: CNC-controlled, oil tank capacity: 160 l, travel distance X-axis: 500 mm, back gauge adjustment: CNC-controlled, back gauge speed R-axis: 100 mm/s, back gauge travel distance R-axis: 160 mm, overall weight: 13,500 kg, total length: 2,300 mm, total width: 4,000 mm, total height: 3,100 mm, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, retraction speed: 115 mm/s, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, lower tooling, safety light barrier, upper tooling, Offered Machine: Used CNC Hydraulic Press Brake Manufacturer: CR Electronic Model: GOLD 130/31 Year of manufacture: 2004 Control: Delem DA-66W (8-axis capable) Condition: used, fully functional (Z-axes currently out of service, see below) Technical Specifications: - Press force: 1,300 kN (130 t) - Bending length: 3,100 mm - Distance between uprights: 2,600 mm - CNC-controlled axes: Y1, Y2, X, R, Z1, Z2 (Note: Z1 and Z2 are currently electronically out of service – new servo drives required. Manual movement possible.) - Stroke: 350 mm - Installation height: 550 mm - Throat depth: 500 mm Djdpfsw A Rggsx Afzsku - Backgauge (X): 600 mm - Table height: 950 mm - Working speed: 10 mm/s - Return speed: 115 mm/s - Motor power: 11 kW - Operating pressure: 275 bar - Weight: approx. 13,500 kg Equipment & Features: - CNC-controlled hydraulic crowning - System tool holders top & bottom - Manual quick clamping of upper tools - Laser optical finger guard (safety light curtain) - PLC-supported diagnostic system - 2 support arms with quick adjustment - Operating manuals available - CE compliant Including accessories: - Fully equipped tool cabinet - Upper tool 88°, full machine length - Upper tool 35°, full machine length - Round bending upper tool - V8 T-die, full machine length - V12 T-die, full machine length - Flattening die, approx. 2,000 mm length Condition / Remarks: - Machine is in well-maintained condition, currently connected - Inspection and test run under power possible on site - Z1/Z2 currently not operational – new servo drives required - Machine is being replaced due to a planned modernization involving the acquisition of a new press brake. Price: €26,500 net (plus VAT) Negotiable for quick and straightforward purchase.

Condition: excellent (used), functionality: fully functional, Year of construction: 1995, Fasti CNC pressbrake Model 904 - 50/20 Year : 1995 Capacity : 2050 mm. x 50 tons CNC control : Delem DA 23 e - 6 axis 2 hand control and footpedal Front arms Angle punch : 2000 mm. in segment Dodoxdahgspfx Afzsku Gooseneck punch : 2000 mm. in segment Gooseneck punch : 1000 mm. V die : 10 - 15 - 22 mm. in 2000 mm. V die : 30 - 40 mm. in 1000 mm.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, bending force (max.): 300 t, working width: 6,050 mm, - Max. pressing force 300 t - Max. working width 6050 mm - Operating hours 26,200 h - CNC control DELEM DA 69 TW Dedpsxc N Rbsfx Afzsku - Y1 // Y2 // X // R // Z1 // Z2 // Crowning controlled - Weight approx. 33 t - Extensive tool set incl. tool cabinet included - Machine is powered on and ready for demonstration

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 28,300 h, machine/vehicle number: 16500126, Press force: 400 kN Total bending length: 1030 mm Standard stroke [S]: 200 mm Clearance [D]: 515 mm Distance between columns: 1060 mm Dkedpswv N Naefx Afzsu Table width: 60 mm X-axis backgauge travel range: 500 mm X-axis travel: 300 mm X-axis travel speed: 1500 mm/s R-axis travel: 100 mm R-axis travel speed: 500 mm/s Z-axis travel: 955 mm Z-axis approach speed: 2000 mm/s Y-axis approach speed: 300 mm/s Maximum Y-axis bending speed: 25 mm/s Y-axis positioning accuracy: 0.004 mm Oil capacity: 100 l Main drive power: 7.5 kW Weight: 4 t Length, approx. [L]: 1520 mm Width, approx. [W]: 1584 mm Height without increased clearance and stroke, approx. [H]: 2449 mm 1. Intelligent control system and drive with an exceptionally low noise emission (below 75 dB) in the Xpert 40 enables part production with about 30% lower energy consumption compared to conventional electrically-driven machines. 2. ByVision software with a 22-inch LCD display and touch technology 3. Intelligent process control guidance with Energy Saver 4. Automatic tool protection system 5. Foot pedal 6. Electrically operated protective sliding doors 7. User manual on CD 8. Ambient temperature from 7°C to 35°C 9. Voltage: 400 V, 50 Hz, 3 Ph 10. 'Bend G2' – optical safety system with manual height adjustment 11. 6-axis backgauge (3 additional axes) 12. 3-backgauge set - Xpert 40 (N0002.0040.000) - Set for integrating a third backgauge in the press brake 13. Ergonomic LED lighting package - Light output: 1500 lux 14. Ergonomic front supports with table. Max. load is 35 kg. 15. 'At your fingertips' tool cabinet - accommodates 3m of tools within easy reach (1 set of punches and 2 sets of dies). 16. Optical bending guidance system – the operator is guided throughout the bending process by the optical guiding system. 17. Ergo Bending Line Laser – Bystronic Bending Line Laser serves as a visual assistance for the operator by projecting a bending line on the material surface. The operator is supported by a virtual bending line when the backgauge fingers cannot be used (fully or partially). The laser line can be set at different heights depending on the die height (e.g., 55 / 100 mm), depending on material thickness or workpiece size. 18. Productive XPT clamping package (WILA NSCL II upper tool clamp and T12/90 table) 19. WILA hydraulic clamping package includes both upper and lower tool clamping with T12/90 table. 20. WILA NSCL II/XPT upper tool clamping (Productive clamping pack XPT) – XPT-type (Wila) upper tool clamping allows tool mounting in 0 and 180° orientations. 21. T12/90 table (Productive XPT clamping package) – T12/90 table with a height of 90 mm and width of 72 mm offers extensive space for Z-bends. The machine is fully operational. In continuous use. Viewing and testing of the machine are welcome.

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 2,400 h, 40 tons press brake with 4 CNC axes back gauge Excellent condition with only approx. 2,400 hours (93,000 strokes) Incl. extensive set of tools !!! Manufacturer: DURMA Model: AD-ES 1240 silent Year of construction: 2019 (commissioning: 2020) Maschinennummer:73071915309 Operating hours, approx.: 2,400 h (93,000 strokes) Status: 12/2023 Control system: Cybelec CNC ModEva 19T TECHNICAL DATA: Folding length: 1,275 mm Free stand passage: 1,300 mm Press force: 400 kN Controlled 4-axis backgauge: X, R, Z1, Z2 Stroke length: 200 mm Installation height: 440 mm Table width: 104 mm Table height: 1,000 mm Column projection: 410 mm X-axis travel range: 650 mm Traversing speed X-axis: 500 mm/s Infeed speed (Y): 180 mm/s Bending speed (Y): 20 - 40 mm/s Working speed (R): 350 mm/s Travel range R - axis 250 mm Motor power: 7.5 kW Weight: approx. 4,500 kg BASIC EQUIPMENT: Control system: Cybelec ModEva 19T CNC controlled crowning Backgauge: AC servo motors with ball screw INCLUDED OPTIONS: Fiesseler safety system AKAS II M FPSC-B-C Control system: Delem DA 69 T CNC controlled back gauge X, R, Z1, Z2 Hydraulic upper tool clamping Durma (type Wila) Hydraulic lower tool clamping Durma (type Wila) Dkedou Rtifjpfx Afzeu Hydraulic power pack for clamping The machine can be inspected under production conditions. Subject to prior sale. Sale under exclusion of any guarantees and within the scope of our general terms and conditions. All information without guarantee.

Year of construction: 2002, condition: ready for operation (used), Main Drive Spindle motor power 11 kW Stroke 110 mm Dsdpjxaql Usfx Afzjku This SEYI SN1-110 was manufactured in 2002. It is a mechanical C-frame crank press with a 110 tons capacity and a stroke of 110 mm. The machine offers an adjustable speed range of 35–65 SPM, a maximum die height of 350 mm, and a main motor of approximately 11 kW (15 HP). Contact us for more information about this machine. Application Types Stamping

Condition: used, functionality: fully functional, Year of construction: 2018, overall weight: 20,000 kg, total length: 5,250 mm, total width: 1,770 mm, total height: 2,850 mm, pressing force: 320 t, 3 axes (Y1, Y2, X) CNC CONTROL DT-15 - 2D graphic display 15" - Intuitive touch-screen operation (simply draw the bending contour with your finger) - User-friendly conversational programming Bjbjwntlvep Uk Tnpjwt - Automatic calculation of bending sequences - Automatic calculation of blank length for sheet metal cutting - Graphical product and tool memory - Correction option - USB ports for backup and program transfer - PC software with which programs can also be written on the PC and then transferred to the machine via USB Servo-motor driven backgauge on linear guides and ball screws Backgauge finger blocks on double linear guides CNC-controlled crowning Upper tool 1010/A/75°, divided and offset 4-V die block 60x60 2009 (V=16, 22, 35, and 50 mm) Laser safety device Fiessler AKAS mounted on upper beam Sheet support arms on linear guide Includes all dies shown in the photos! Dkedswntlvopfx Afzeu Viewing under power on site by appointment.

Condition: excellent (used), Year of construction: 1998, pressing force: 125 t, Hydraulic press brake Fab. EHT Typ. VARIOPRESS 125-3550 Year 1998 Technical data Make: EHT Type: Variopress 125-3550 Year of construction: 1998 Capacity: 125 t Effective length: 3550 mm Machine column: 2550 mm Projection: 300 mm Stroke: 240 mm Installation height: 640 mm Oil volume 250 L Dimensions: approx. L 3.90 x W 1.80 x H 3.00 m Weight: approx. 12 t Equipment - Control system: Cybelec DNC 80 2D graphics - Automatic upper tool clamping - Lower tool clamping 90mm and 13mm - controlled axes: Y1, Y2, X1, X2, R, Z1, Z2 - motorized crowning Dkedpfx Afsr Epr Uozou - 6 x V block die length 3,500, segmented: with V12/30°, V40/80°, V24/80°, V10/30°, V24/30°, V16/30° - Punch straight, H 350mm / approx. 70°, length 3060 mm, segmented All data without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Condition: good (used), functionality: fully functional, Year of construction: 2010, control type: CNC control, Equipment: CE marking, documentation/manual, emergency stop, finger protection, lower tooling, safety light barrier, upper tooling, - max. working length 4050 mm - max. pressing force 230 t - Cybelec ModEva 10S CNC control Dkedpfsxcydrsx Afzsu - Axes: Y1 // Y2 // X // R - AMADA-PROMECAM tooling system - incl. tools - Lazersafe finger protection system - weight approx. 20 t - very well maintained, low operating hours

Condition: new, The DURMA AD-S 601000 is a powerful hydraulic press brake that ensures the highest precision and efficiency in sheet metal processing. With a pressing force of 1000 tons and a working length of 6 meters, it is ideal for demanding applications, especially when processing large and thick materials. Technical details: - Model: DURMA AD-S 601000 - Pressing force: 1000 tons - Working length: 6 meters - Control: SKY22 (3D control) - Back stop: 6 axes (X1, X2, R1, R2, Z1, Z2) - Bending aid: AP3-AP4 integrated for optimized handling of heavy workpieces - Condition: As good as new, available immediately Dsdpfxevwm A Io Afzsku Features and advantages: - High bending accuracy thanks to the latest CNC control - Robust construction for a long service life - Flexibility thanks to the 6-axis back stop control - Support for heavy and large sheets thanks to integrated bending aid The machine is available immediately and can be inspected on request. We are happy to provide you with further information or to arrange an appointment.

Condition: used, Year of construction: 1988, pressure 180 t chamfer lenght 3100 mm distance between columns 2550 mm control Konventionell Dkodpfx Afsxcg E Aozou throat 270 mm back stop - adjustable 550 mm work height max. 900 mm total power requirement 15,0 kW weight of the machine ca. 8,2 t dimensions 3,2 x 1,3 x 2,47 m - 1 upper tool, - 1 lower tool, pointed - Motorized backgauge - 2 support arms - Additional upper tool, split, deer foot - Additional lower tool 2170mm

Condition: ready for operation (used), Year of construction: 2005, General Data Measurements width 2000 mm Measurements depth 3500 mm Measurements height 2700 mm Machine weight 9700 kg Control Unit Brand CYBELEC Model Cybelec control system Main Drive Spindle motor power 9 kW Pressing force 100 tons Stroke 100 mm Number of axis 4 This 4-axis Vimercati PHSI 100x3050 press brake was manufactured in 2005. It features a working width of 3050 mm, motor power of 9 kW, and a pressing force of 100 tons. The machine dimensions are 3500 x 2000 x 2700 mm, and it weighs 9700 kg. It includes a fully refurbished Cybelec control system. Consider the opportunity to buy this Vimercati PHSI 100x3050 press brake. Contact us for more information about this machine. Dsdpfx Aow Ul Emjfzeku Application Types Bending

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, Safan electric press brake type SMK-K-50-2550 TS2 working width 2550 mm Dksdpfx Aew Uf I Iofzou max. pressing force 50 tons Safan CNC control with touchscreen, type TS2 CNC-controlled Y-X-R-Z1 and Z2 axes including a set of tools

Year of construction: 1992, condition: excellent (used), Hydraulic press brake Fab. DARLEY Type. EHP 150 - 43/37 Very good condition, year 1992 Technical data Make: DARLEY Type: EHP 150 - 43/37 Year of manufacture: 1992 working length: 4300 mm power: 150 t distance machine column: 3700 mm ram stroke: 175 mm Engine power: 11 kW Dimensions: approx. L 4.7 x W 1.6 x H 3.1 m (transport height 2.85 m) Weight: approx. 16 t Equipment: - Control Delem DA 58 - Block die: V14, V60, V40, V24, V12, V30, V22, V10 - Punch straight height 195 mm, segmented Dksdsh U A Ibopfx Afzju - 2. punch cranked height 195 mm, segmented, length 4.000mm - controlled axes: Y1, Y2, X, R, Z - motorized crowning - 2 support arms - operating instructions + test books All data without guarantee. The machine is in a very good condition. A demonstration under power is possible at any time in our exhibition hall.

Condition: used, functionality: fully functional, Year of construction: 2017, control type: CNC control, controller manufacturer: CYBELEC, controller model: MODEVA 15T, bending force (max.): 60 t, working width: 1,250 mm, bending length: 1,250 mm, stroke distance: 265 mm, throat depth: 450 mm, distance between stands: 1,050 mm, number of axes: 4, type of crowning: CNC-controlled, travel distance X-axis: 650 mm, Equipment: european tool clamping system, DURMA press brake 1250 x 60 tons, year 2017 Dedjxcfqqspfx Afzeku

Year of construction: 1983, condition: used, machine/vehicle number: 28148, pression: 150 t working width: 4500 mm clear support width: 3050 mm support throat: 300 mm rear stop: 1000 mm electrical connection: 380 V, 18,5 kW weight: 14,8 t Dkedjb N Evmjpfx Afzsu space needed: 4200 x 2000 x 3000/3150 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, ITALMACCHINE hydraulic press brake Year of manufacture: 2000 CE CNC control: ESA S 530 Controlled axes: 4 (Y1-Y2-X-R) Bending length: 3050 mm Pressing force: 100 tons No. 4 rear stop reference fingers Tool clamping: Promecam type Safety barriers Weight: 7200 kg Dksdsw T Thtepfx Afzou Motor power: 7.5 kW.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1987, machine/vehicle number: 13597, working width: 6,200 mm, back gauge adjustment: CNC-controlled, back gauge: 1,000 mm, overall weight: 49,500 kg, power: 30 kW (40.79 HP), input voltage: 400 V, sheet thickness (max.): 20 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 12 mm, HYDRAULIC GUILLOTINE SHEAR LVD MVCSB 62/20 MNC 85 YOM 1987 SN: 13.587 - Max plate thickness: 20mm ST45 - Cutting length: 6200mm - GAP : 300mm Dsdpfxow T Sqae Afzjku - Stroke back guagel: 1000mm - tank: 650 liter - V: 3x400V - P: 30kW - Pomp: Vickers 25VQ 21A 1A 20 TRANSPORT Weight : 49500kg LxWxH: 7950mm x 3000mm x 3720mm VIDEO AVAILABLE

Condition: reconditioned (used), functionality: fully functional, LVD 4000 x 200T Press Brake Dkjdpfx Aswtmi Eefzsu Type PPBL 200/40 Capacity 4000 x 200T Maximum stroke 150 mm Weight 13.5T With mobile blade rack

Condition: excellent (used), Year of construction: 2005, pressing force: 50 t, Hydraulic press brake Fab. AMADA Typ. HFP 50-20 Year 2005 Technical data Make: AMADA Type: HFP 50-20 Year of construction: 2005 Effective length: 2090 mm Capacity: 50 t Passage upright: 1,665 mm Stroke: 200 mm Projection: 400 mm Dedpfx Afotzcxpezoku Installation height: 470 mm Motor power: 6 kW Dimensions: approx. L 2.95 x W 1.60 x H 2.45 m Weight: approx. 4.8 t Equipment - Controlled axles: Y1, Y2, X, R, Z1, Z2 - FIESSLER light barrier at the front - Amada upper tool clamping - CNC control 3D AMNC graphics - Rear safety guard (hinged mesh doors) - Swivel operation - front left - Tools: o Upper tool straight, R 0.8mm, H 117mm, length 2,000 mm o Bottom tool V10/88°, length 2,000 mm All data without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Condition: used, functionality: fully functional, Year of construction: 2010, control type: hydraulic, degree of automation: semi-automatic, actuation type: electric, Bending length: 3000 mm. Press force: 100 tons. Maximum sheet thickness: 6 mm Motor: 9 kW. Dedpfx Ajxca Epsfzeku DELEM control. Net price: 54,300.00 PLN net + 23% VAT VAT invoice issued.

Year of construction: 1992, condition: used, machine/vehicle number: 80076, pression: 400 t Dksdpfxjbfk Anj Afzeu working width: 4100 mm clear support width: 3150 mm support throat: 330 mm electrical connection: 400 V, 37 kW weight: ca. 25 t space needed: 4100 x 2300 x 3910/530 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, Synchronized Hydraulic Press Brake MVD Dkedpfjw T S T Ijx Afzsu Model: I-Bend B 3100/175 Year of manufacture: 2021 CNC Control: ESA Touch-Screen S640 Number of controlled axes: 7 (Y1-Y2-X-R-Z1-Z2-A1) Automatic WILA crowning table PROMECAM quick-release tool clamping system Dsp Laser Working bending length: 3100 mm Press force: 175 tons Opening: 465 mm Y-axis stroke: 260 mm Machine in excellent condition.

Condition: used, Year of construction: 1993, bending force (max.): 125 t, working width: 3,050 mm, Hydraulic Press Brake Manufacturer: TRUMPF, Model: TrumaBend 125/3 Year of manufacture: 1993 Dkedpfxewzatts Afzou Technical Specifications Manufacturer: Trumpf Model: TrumaBend 125/3 Year: 1993 Operating hours: 48,482 h (read off) Pressing force: 125 t Bending length: 3050 mm Stroke: 200 mm Operating pressure: 280 bar Connected load: 19.8 kVA Compressed air connection: 6 bar Dimensions: approx. L 3.50 x W 2.30 x H 2.65 m Weight: 9.2 t Features • Pneumatic die shifting • Controlled axes: Y1, Y2, X • R-axis pneumatic • 2 movable support arms • Delem DA 58 control, 2D • Hydraulic upper tool clamping • Die holder: 105 mm wide + 13 mm groove Tooling: • Straight upper tool, L = 3050 mm, H220, approx. R1.0, segmented • Block die: V6, V10, V20, V30, V50, L = 3050 mm All information subject to change and without guarantee. A powered demonstration is available at any time in our showroom.