Used Metal Scissors for sale (36,441)

Condition: excellent (used), Desktop Metal 3D Printer Complete System Here, we offer a complete Desktop Metal 3D printer system. 3D metal printer studio system from Desktop Metal Hnsdpszd Tlljfx Ap Hjt Complete system: 3D printer + debinding machine + sintering furnace Desktop Metal The three-part solution includes a 3D printer, debinder, and furnace. Manufacturer: Desktop Metal Model: Desktop Metal Studio System Operating condition: Used (Good) Year of manufacture: 2019 Desktop Metal Studio System includes: 1.1 Desktop Metal Studio 3D printer Bound Metal Deposition (BMD) technology Features: Printed materials: Metal Technology: FDM Application: Industrial Other features: Office X-axis travel: 30 cm (12 in) Y-axis travel: 20 cm (8 in) Z-axis travel: 20 cm (8 in) Description: Unlike laser-based systems that selectively melt metal powder, the printer extrudes bound metal rods – similar to an FDM printer. This eliminates the safety requirements often associated with 3D metal printing, and enables new features such as the use of closed-cell infills for lightweight strength. 1.2 Desktop Metal Studio Debinder (Delamination machine) Fully automatic debinding Cleaning tank: 17.4 L (in process) / 22.5 L (storage) Description: The debinder prepares green parts by dissolving the primary binder for sintering. With a low-emission design, it requires no external ventilation and is safe for an office environment. Automatic liquid distillation and recycling mean that no refilling is required between cycles. 1.3 Desktop Metal Studio Sintering Furnace Hybrid technology (microwave & conventional heating elements) Build volume: 305x205x205mm Carbon housing Gas supply: 2 x 900 L gas cylinders Heating power: 20 kW Features: Function: Sintering Configuration: Chamber Heat source: Gas Other features: High temperature, automatic Maximum temperature: 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through an office door, the furnace delivers industrial-grade sintering in an office-friendly package. Built-in temperature profiles tailored to each design and material ensure uniform heating and cooling without the residual stresses found in laser-based systems. Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 5347, clamping force: 6,500 kN, screw diameter: 85 mm, clearance between the columns: 920 mm, column diameter: 920 mm, injection pressure: 2,000 bar, injection weight: 2,600 g, ejector force: 180 N, ejector stroke: 250 mm, opening stroke: 920 mm, total length: 8,870 mm, total width: 2,100 mm, total height: 2,550 mm, overall weight: 32,500 kg, heating capacity: 39 kW (53.03 HP), power: 75 kW (101.97 HP), input voltage: 400 V, Equipment: documentation/manual, For sale is a PLASTIC METAL UNYKA 650 injection molding machine with a clamping force of 6,500 kN (650 tons). The machine is currently in operation and therefore in functional condition. Hsdjzza Egspfx Ap Hont It is available immediately. Technical data: Manufacturer: PLASTIC METAL S.p.A. Type: UNYKA 650 Year of manufacture: 2007 Clamping force: 6,500 kN (650 tons) Machine weight: approx. 32,500 kg Drive power: 75 kW Heating power: 39 kW EUROMAP: 6500H/4165 Serial number: 5347 The machine is currently still in production and can be inspected and demonstrated on-site after prior arrangement. Inspection is only possible after prior arrangement. Loading & Collection The machine can be loaded directly on-site after production ends. Loading with an overhead crane is possible. Sale without peripheral equipment. The machine is offered without peripheral equipment. Dismantling, transport, and further processing will be arranged. Availability: immediately If you are interested or would like to arrange an inspection appointment, we look forward to receiving your inquiry.

Condition: used, Year of construction: 2015, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, input frequency: 55 Hz, type of input current: three-phase, pressing force: 160 t, stroke length: 200 mm, table width: 200 mm, table length: 3,200 mm, throat depth: 320 mm, clearance between the columns: 2,530 mm, retraction force: 160 t, oil tank capacity: 200 l, total length: 3,280 mm, total width: 2,700 mm, total height: 2,000 mm, overall weight: 11,500 kg, Equipment: CE marking, documentation/manual, We offer a used Metal Technics 3200/160 E200 press brake, manufactured in 2015. The press is currently in operation in a production environment. It operates in an intermittent cycle, in a single-shift mode – 8 hours. Oil is changed regularly. Equipment: PRESS BRAKE Model: 3200/160 E200 Serial number: 48342 Year of manufacture: 2015 Motor power: 11 kW Weight: 11500 kg Hnjdsy Um S Nepfx Ap Het Includes tooling (punches and rotating die). Punch mounting type: Amada. Equipped with light curtains and two backstops. If you have any questions or require additional information, please send a message or contact us by phone.

Condition: ready for operation (used), Year of construction: 2021, overall weight: 97 kg, travel distance X-axis: 300 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 200 mm, number of axes: 3, This 3-axis DESKTOP METAL Metal Studio 2 was manufactured in 2021. It utilizes Bound Metal Deposition technology and features a build volume of 300 x 200 x 200 mm. The machine supports various materials, including 316L and H13 Tool Steel, and operates with a dual extruder system. If you are looking to get high-quality metal 3D printing capabilities, consider the DESKTOP METAL Metal Studio 2 machine we have for sale. Contact us for further details. • Technology: Bound Metal Deposition (BMD) • Process: 2-step (printing and sintering – no debinder needed) • Build volume: 300 x 200 x 200 mm • Layer height: 50 µm to 250 µm • Build plate: Heated up to 120°C (vacuum-adhered) • Extruders: Dual (metal and ceramic support) • Support interface: Ceramic release layer (manual breakaway) • Materials: 316L, 17-4 PH, 4140, H13 tool steel, copper • Software: Fabricate (automated scaling and sintering profiles) • Connectivity: WiFi / Ethernet Hnedpsyuyz Njfx Ap Hot Additional equipment • Furnace: Max temperature 1400°C; atmosphere: partial pressure Synthogas (Ar/H2); sintering cycle: 16–24 hours

Condition: excellent (used), Year of construction: 2020, operating hours: 5,200 h, functionality: fully functional, machine/vehicle number: OWD/381/2020, feed length X-axis: 5,200 mm, I have an Optymalizerka OWD-1600 Metal-technika machine for sale. It is a very good machine manufactured by a Polish company. The arm movement is driven by a servo motor, enabling very fast and precise cutting. The machine control is based on a Mitsubishi controller (one of the best in the world for machine control solutions). Year of manufacture: 2022. The machine was used as a backup, operating on average for half a shift per day. The machine is connected and ready for testing. Interested parties are welcome to come and see it. I can record videos or send more photos. Hnodpszhltvjfx Ap Hot Price is net. KEY FEATURES SPECIFICATIONS Electronics: Controller with a color touchscreen display "MITSUBISHI" Functions: - Full optimization of 30 dimensions in two quality classes. - Creation of cutting programs for different clients. - Cutting at a point marked with a fluorescent pencil. - Trimming the margin (beginning and end of the input material). - Cutting in batches (several elements at once). - Counters: meters, total, shift, operator, monthly. - Cutting accuracy: ±0.2 mm. - Ability to handle material up to 5.2 m in length. - Table with ejectors. Motor: 7.5 KW (saw Ø500 – 140 teeth) Input material width: 12 - 250 mm max. width/height (250 / 50 mm) Input material height: 20 - 120 mm max. height/width (140 / 120 mm) Input material length: up to 5,200 mm Lubrication: Oil-based central lubrication system Automation at the output: Connection for an inclined conveyor and sorting table.

Condition: used, functionality: fully functional, Year of construction: 2014, power: 8 kW (10.88 HP), platform length: 4,100 mm, overall weight: 2,850 kg, transport length: 5,700 mm, transport width: 1,330 mm, transport height: 1,300 mm, construction height: 1,300 mm, Equipment: CE marking, The WORK SP 4000 CNC butt welding machine for plastic sheets is manufactured by the Czech company METAL WORKING CZ, s.r.o. It was produced in 2014, is in excellent condition, and comes with a spare Teflon coating. This is a high-tech industrial machine with CNC control, designed for the precise welding of thermoplastic sheets and panels. The main technical parameters and features of this machine series include: Main technical parameters: Maximum working width (welding length): 4000 mm, allowing for the processing of very large plastic sheets. Thickness of materials to be welded: Typically in the range of 2 mm to 25–30 mm (depending on the specific modification and type of plastic). Compatible materials: Thermoplastic sheets made of PE (polyethylene), PP (polypropylene), PVDF (polyvinylidene fluoride), and PVC (polyvinyl chloride). Welding type: Butt-welding with a heating element, using the heated element / hot plate welding method. Control and CNC functionality: Fully automatic cycle: The CNC control precisely manages all phases of the welding process: preheating, transfer time, welding pressure creation, and cooling time. Material database: A system with pre-set welding parameters according to international standards (e.g., DVS standards for welding plastics). Data logging: Automatic generation and recording of welding protocols for quality control (containing information on pressure, temperature, and cycle duration). Advantages of the design: High mechanical stability: A massive steel frame ensures even distribution of pressure along the entire length of the 4-meter sheet. Hydraulic system: Precise adjustment of the clamping force, guaranteeing a homogeneous weld seam without internal stresses. Teflon coating: The heating element is equipped with a high-quality non-stick coating for easy cleaning and to prevent material burning. Length: 5700 mm Width: 1330 mm Height: 1300 mm Weight: 2850 kg Working length: 4100 mm Working height of the machine: 950 mm Minimum thickness of the plastic sheet: 4 mm Maximum thickness of the plastic sheet: 40 mm Machine power: 8 kW Operating voltage - electrical circuits: 3 PEN 50Hz 400/230V Air consumption: 0.8 m³/h Hnodpfx Ajzdiz Njp Hst Minimum pneumatic pressure: 0.8 MPa Maximum pneumatic pressure: 1.0 MPa Standard for electrical equipment: EN 60204-1 Applicable basic and technical standards: See Chapter 3.3 of the manual Maximum noise level at the workstation: 70 dB If you have any further questions or need more information, please send us a message or call.

Year of construction: 2022, operating hours: 2,500 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: OWD/492/2022, Equipment: CE marking, For sale is a used Metal Technika OWD-1600 4m optimizer with very low operating hours, approximately 2500 hours. The machine is connected and ready for trials and tests. Net price. TECHNICAL SPECIFICATIONS Performance From 3,200 to 8,250 m/8 hours. Electronics: Controller with a color touchscreen display "MITSHUBISHI". Functions - Full optimization of 30 dimensions in two quality classes, - Creation of cutting programs for different customers, - Cutting at the marked location using a fluorescent pencil, - Trimming the margin (beginning and end of the input material) - Cutting in batches (several pieces at once) - Meters counters: total, change, operator, monthly, - Cutting accuracy ±0.3 mm. Engine: 7.5 KW (saw Ø500 – 140 teeth) Width of input material Hnedpfezdf Tpex Ap Het 12 - 250 mm max. width/height (250 / 50 mm) Height of input material 12 - 120 mm max. height/width (120 / 120 mm) Length of input material up to 4,200 mm. Lubrication: Oil-based central lubrication system. Output automation Connection for a conveyor belt and a sorting table.

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, Metal Technika OWD 1600 Optimizer Hnsdpfx Aorx Rxpjp Het - manufactured in Poland - year of production 2017 TECHNICAL PARAMETERS: - cutting width 250 mm - cutting height 120 mm - Capacity from 3 200 to 8 150 mb /8 h - sorting table with 5 knockouts - Electronics Controller with color touch screen display "MITSHUBISHI" - Features - full optimization of 30 dimensions in two quality classes, - creation of cutting programs for different customers, - cutting at the point of marking with fluorescent crayon, - margin cutting (beginning and end of the input material) - cutting in packages (several elements at once) - meters, total, shift, operator, monthly counters, - cutting accuracy ±0.2 mm - Motor 5.5 KW (saw Ø500 - 140z) - Width of input mat 12 - 250 mm max. width / height ( 250 / 50 mm) - Height of input mat 12 - 120 mm max. h/w ( 120 / 130 mm) - Input mat length up to 4,200 mm - Lubrication Oil central lubrication system - Automation at the output Connection for slant conveyor and sorting table

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 570 mm, spindle bore: 105 mm, turning diameter: 800 mm, turning diameter over bed slide: 800 mm, turning length: 3,000 mm, feed length X-axis: 420 mm, quill travel distance: 235 mm, total length: 4,740 mm, total width: 1,140 mm, total height: 1,910 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 25 rpm, swing diameter over cross slide: 570 mm, metric thread diameter (max.): 120 mm, metric thread steps: 54, bed width: 400 mm, rotational speed (max.): 1,600 rpm, rotational speed (min.): 25 rpm, type of input current: three-phase, swing diameter over bed slide: 570 mm, overall weight: 4,300 kg, disc diameter: 450 mm, faceplate diameter: 450 mm, Metal Technics Polska Professional CNC machines, lasers and metalworking equipment We are a manufacturer and importer of high-quality metalworking machines. We supply proven technologies from Poland, Europe and Asia – used by hundreds of companies across Europe. For 15 years, we have focused on quality, precision and reliability. Hnedpfx Apsyz Ubxj Hot MTP METAL LATHE 800x3000 7.5 kW SPINDLE BORE 105 Packaging condition: original LATHE CQ6280 800 x 3000 mm The machine tool is designed for machining workpieces, most commonly with rotational geometry (shafts, cones, spheres, internal and external threads). Typical tools include turning tools, drills, and threading tools. Thanks to modern solutions and equipment, the lathe is ideal for professional and industrial applications. Technical data: Max. workpiece length: 3000 mm Swing over bed: 800 mm Swing over cross slide: 570 mm Swing over gap: 1035 mm Z1 axis travel: 230 mm Gap length: 330 mm Bed width: 400 mm Tool post rotation: 70° X-axis travel: 420 mm Spindle speed: (16) 25 – 1,600 rpm Spindle bore: 105 mm Spindle mount: D1-8 Spindle taper: MT5 Feed X-axis: (25) 0.022 – 0.74 mm/rev Feed Z-axis: (25) 0.044 – 1.48 mm/rev Tailstock quill diameter: 90 mm Tailstock taper: MT5 Tailstock quill travel: 235 mm Tailstock offset: 11 mm / 0.4" Metric threading: (54) 0.45 – 120 mm Diametric threading: (42) 0.88 – 160 DP Module threading: (46) 0.25 – 60 mm Whitworth threading: (54) 7/16 – 80 TPI Main motor power: 7.5 kW Power supply: 400 V Overall dimensions (L x W x H): 4740 x 1140 x 1910 mm Weight: 4300 kg Equipment: • 3-axis digital readout • 3-jaw chuck Ø 320 mm • 4-jaw chuck Ø 400 mm • faceplate Ø 450 mm • drive plate • fixed splash guard • cooling system • steady rest max. Ø 250 • follow rest • chuck guard • reducing sleeves • dead center • tools

Condition: new, Year of construction: 2026, machine/vehicle number: MTP-BS260G-2026, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 260 mm, control type: manual, pivoting range: 60 °, actuation type: electric, rotational speed (max.): 72 rpm, rotational speed (min.): 36 rpm, total height: 1,900 mm, total length: 1,950 mm, total width: 750 mm, overall weight: 230 kg, Equipment: CE marking, documentation/manual, motor brake, rotational speed infinitely variable, OFFER OF THE WEEK – 5% DISCOUNT! # MTP BS260G METAL BAND SAW ### Professional Horizontal Metal Band Saw with 0–60° Swivel Cutting Head The brand-new MTP BS260G Metal Band Saw has been designed for precise cutting of carbon steel, stainless steel, acid-resistant steel, alloy steel, and non-ferrous metals. Thanks to its robust construction, hydraulic downfeed system, and high-quality blade guidance, it is an ideal solution for manufacturing plants, metal fabrication workshops, tool rooms, maintenance departments, and engineering companies. The swivel saw head allows precise cutting at any angle from 0° to 60°, providing excellent flexibility for a wide range of applications. The hydraulic downfeed system ensures smooth, accurate, and repeatable cutting performance. ## Standard Equipment • Integrated coolant system • Hydraulic cylinder with infinitely adjustable downfeed • Manual mechanical blade tensioning system • Carbide blade guides with precision bearings • Swivel cutting head (0°–60°) • Material clamping vice • Infinitely variable feed adjustment • Automatic blade drive shut-off after completing the cut • Technical documentation and operating manual • CE Declaration of Conformity ## Key Features • Precise mitre cutting from 0° to 60° • Heavy-duty cast iron saw frame for maximum rigidity • Two blade speeds: 36 and 72 m/min Hnjdpfxeyr Ndhe Ap Hot • High-precision carbide blade guidance for extended blade life • Hydraulic automatic downfeed system • Integrated coolant system for improved blade durability • Excellent cutting accuracy and surface finish • Ideal for cutting tubes, pipes, profiles, bars, and solid steel sections ## Technical Specifications • Machine type: Horizontal metal band saw • Cutting angle range: 0°–60° • Blade dimensions: 2455 × 27 × 0.9 mm • Blade speeds: 36 / 72 m/min • Feed rate: 0–50 m/min (infinitely variable) • Blade tensioning: Manual mechanical • Downfeed adjustment: Hydraulic, infinitely variable • Vice base height: 1010 mm • Main motor power: 1.1 kW • Power supply: 400 V / 50 Hz / 3-phase • Machine dimensions: 1950 × 750 × 1900 mm • Machine weight: 230 kg ## Safety The machine is equipped with blade guards, safety switches, and an automatic motor shut-off system that stops operation after the cutting cycle is completed or when a guard is opened. An additional safety feature automatically switches off the machine if the saw blade breaks. ## Technical Support We provide professional technical advice, warranty and after-sales service, as well as assistance in selecting the appropriate saw blades and cutting parameters. Transport can be arranged throughout Europe and worldwide. Brand-new machine supplied with a 24-month manufacturer's warranty, fully operational and ready for immediate use.

Condition: used, Year of construction: 2007, functionality: fully functional, We offer a Magnetix metal magnet. Type: SWP80 Working width: 800 mm Year of manufacture: 2007 Hnodpfxst Uyvre Ap Hjt

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, saw blade diameter: 450 mm, cutting height (max.): 100 mm, cutting width (max.): 200 mm, type of input current: three-phase, year of last overhaul: 2025, For sale: Metal Technika OWD-1600 Optimizing Saw / Cross-cut Saw, year of manufacture 2018. The machine is fully operational, ready for immediate use – ideal for fast cutting of components in serial production. A major advantage of this machine is its ability to set a cutting schedule for up to 8 positions: you simply set the dimension and the quantity, and the machine automatically performs cutting and proceeds to the next positions without the need for tool changes. Technical Data: Model: Metal Technika OWD-1600 Year of manufacture: 2018 Maximum material width: 200 mm Maximum material height: 100 mm Maximum board length: 3200 mm Feed speed: approx. 30 m/min Saw blade diameter: min. 400 mm / max. 500 mm Motor speed: 2800 rpm Spindle speed: approx. 6000 rpm Hnjdpfx Apjyv Ewme Hjt Power supply: 3x 400V Power: 7 kW Medium: air 6–7 bar Weight: approx. 1500 kg Performance: The machine operates efficiently – for example: - Batch of 8 boards, 12 mm thick each - Board length: 2800 mm - Cutting into 3 elements (approx. 700 mm) - Cycle time: about 10 seconds The machine can be inspected and tested on site. Location: Elbląg / Warmińsko-Mazurskie, Poland For further questions, please contact me.

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, grinding length: 800 mm, grinding width: 400 mm, total height: 1,850 mm, total length: 1,960 mm, total width: 1,480 mm, feed length X-axis: 800 mm, feed length Y-axis: 415 mm, workpiece weight (max.): 500 kg, feed rate Z-axis: 360 m/min, grinding wheel diameter: 350 mm, distance table to spindle center: 520 mm, table length: 800 mm, table load: 500 kg, type of input current: three-phase, table width: 400 mm, grinding wheel width: 30 mm, spindle speed (max.): 2,800 rpm, overall weight: 1,800 kg, grinding spindle motor power: 4 W, SURFACE GRINDER SP-4080AHR • Rapid vertical feed to the workpiece • Coolant tank with magnetic filter • Digital readouts on 2 axes Hnsdpsy Sgdgofx Ap Hot • Free-standing hydraulic unit with heat exchanger • Longitudinal and cross guides hardened and ground • Table with longitudinal flat guide and cross triangular guide • Electromagnetic chuck • Balancing arbor • Grinding wheel flange • Accessibility for operators with disabilities • Grinding wheel with holder • Wheel dresser • Cooling system • Central lubrication system • Work area lighting • Set of basic adjustment tools • Table cover • Leveling bolts and washers • User manual in Polish • CE Declaration of Conformity Working table size mm 400x800 T-slots (number x width) pcs/mm 1/14 Max. longitudinal travel mm 800 Cross travel mm 415 Max. distance from spindle axis to table mm 520 Longitudinal feed of working table mm/min 3-20 Table feed Automatic mm/min 0-8 Rapid mm/min 600 Manual / per graduation mm/graduation 0.01 Manual / per revolution mm/rev 2 Vertical feed of spindle head Automatic mm/min none Rapid mm/min 360 Manual / per graduation mm/graduation 0.01 Manual / per revolution mm/rev 2 Grinding wheel Rotational speed rev/min 2800 Size mm 350x30x127 Grinding accuracy mm 300/0.005 Surface finish Ra 0.32 Spindle motor power kW 4.0 Cross feed motor power kW 0.04 Max. working table load kg 500 Overall dimensions (LxWxH) mm 1960x1480x1850 Gross weight kg 1800

Condition: new, Year of construction: 2026, functionality: fully functional, power: 8.5 kW (11.56 HP), input voltage: 400 V, type of input current: three-phase, pressing force: 110 t, total length: 3,850 mm, total width: 1,650 mm, total height: 2,680 mm, overall weight: 7,500 kg, warranty duration: 12 months, Equipment: CE marking, documentation/manual, safety light barrier, ## CNC PRESS BRAKE SPB 110T × 3200 | HACO 70 | 4+1 AXES The SPB 110T × 3200 press brake is a precision electro-hydraulic CNC machine designed for professional sheet metal bending in both individual and series production. With a 110-ton pressing force and 3200 mm working length, the machine offers a wide range of applications for manufacturing plants, metalworking workshops and sheet metal processing companies. The machine uses an electro-hydraulic servo synchronization system combined with linear scales monitoring the position of the ram. This solution ensures high accuracy, stability and repeatability throughout the bending process. ### HACO 70 CNC CONTROL – 4+1 AXES The machine is equipped with a HACO 70 CNC controller, allowing precise programming and control of bending parameters and individual machine axes. Y1 – left side of the ram: controls the precise positioning of the left side of the bending ram. Its position is continuously monitored by the measuring system. Y2 – right side of the ram: controls the right side of the ram. Independent control of the Y1 and Y2 axes enables accurate synchronization of both sides and maintains the correct ram position throughout the bending cycle. X – back gauge: controls the forward and backward movement of the back gauge, ensuring precise positioning of the sheet and determining the bending line. The axis is driven by a servo motor and ball screw. R – back gauge height: controls the vertical position of the back gauge fingers, allowing their height to be adjusted according to the tooling and geometry of the workpiece. V – CNC crowning system: automatically compensates for table and ram deflection occurring during bending, helping to maintain a consistent bending angle along the entire length of the workpiece. ### TECHNICAL SPECIFICATIONS • Pressing force: 1100 kN / 110 T • Working length: 3200 mm • Distance between columns: 2700 mm • Throat depth: 400 mm • Ram stroke: 200 mm • Maximum opening height: 480 mm • Controlled axes: Y1, Y2, X, R + V (4+1) • CNC controller: HACO 70 • Main motor power: 8.5 kW • Fast approach speed: 180 mm/s • Bending speed: 13 mm/s • Return speed: 170 mm/s • Machine dimensions: 3850 × 1650 × 2680 mm ### ACCURACY • Ram positioning repeatability: ±0.01 mm Hjdpfey D Nvisx Ap Hsnt • Ram positioning accuracy: ±0.02 mm • Back gauge repeatability: ±0.02 mm • Bending straightness: 0.3 mm / 1 m • Bending angle accuracy: ±1–1.5° • Linear scale resolution: 0.005 mm ### STANDARD EQUIPMENT • Electro-hydraulic servo synchronization system • Linear scales on both sides of the ram • Automatic CNC crowning system • Precision back gauge with linear guides • Servo-driven back gauge with ball screw • Quick tool clamping system • Adjustable front sheet supports The SPB 110T × 3200 combines high positioning accuracy, advanced 4+1 axis control and a robust construction, providing efficient and repeatable performance for both straightforward and more complex sheet metal bending operations.

Condition: ready for operation (used), Year of construction: 2019, HEUFT ONE: Metal Detection and Code Verification Conveyor System Model Heuft HBBNXZ72 YOM 2019 High sensitivity to ferrous and non-ferrous metals Stainless Steel Construction Full Container Checking System (A4) The devices of the new HEUFT ONE series set new standards in terms of detection accuracy, operational reliability and price / performance ratio during an in-line quality inspection in a confined space, and celebrated their world premiere at interpack. The first metal detector and an inspection system for markings up to HEUFT standards can be experienced live at the trade fair. ONE for all: the new products make an affordable introduction to HEUFT cutting edge technology as particularly compact stand-alone devices which are extremely easy to integrate into packaging lines. They combine innovative detection technologies with customised hardware and software and proven procedures for a highly precise product tracking, inspection and fault rejection. Thus the compact complete solutions remove contaminated products and incorrectly marked packaging accurately; food safety has priority! The HEUFT ONE for detecting metal achieves maximum detection accuracy with unique evaluation procedures from the HEUFT development department: it even finds minute pieces of metal in filled food packaging reliably – almost unaffected by the product effect of saline or acidic products and the influence of metal packaging components. Even special ambient conditions such as a "metal free zone" are not necessary for the reliable operation of the compact stand-alone device. The first HEUFT metal detector complements the portfolio of sophisticated systems, which identify all types of foreign objects, with a slim entry-level solution. It is ideal for all those who only wish to find objects made of iron, steel, aluminium or stainless steel first and want to achieve a detection and rejection reliability up to HEUFT standards. Hodpfx Apsyq Rkyo Hjnt The new HEUFT ONE for code verification, marking and dress inspection also provides this during the high-resolution complete examination of food packaging with in-house developed colour sensor camera technology and real-time image evaluation. It detects best before and expiry dates, barcodes and 2D codes, article and serial numbers, imprints and lettering which have been incorrectly applied and are inaccurate as regards content – and that independent of their respective position. The same also applies to deviating logos as well as non-brand colouring and design elements. Proven HEUFT procedures also ensure the accurate removal of incorrectly marked products in this case. Full traceability, clear information about shelf-life and digestibility as well as an attractive appearance at the point of sale are thus always guaranteed. The solid, extremely compact construction in accordance with the hygiene-optimised HEUFT CleanDesign also makes the new HEUFT ONE devices stand out. They are straightforward to integrate into existing packaging lines even where space is limited. The HEUFT ISI bus ensures minimum wiring with the open, flexible assembly directly above the conveyor. Dispensing with change parts makes easy brand changes without mechanical changeovers possible and the organised user interface, which has been reduced to the essentials, ensures error-free operation. This together with continuous monitoring brings the metal detection and code verification in line with HEUFT standards.

Condition: used, Used 3D Printer EOSINT M 270 low operating hours (4910) Hnjdpewd Ulvsfx Ap Hst

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 2,200 kg, power: 3.7 kW (5.03 HP), input voltage: 400 V, input current: 7 A, input frequency: 50 Hz, broaching length: 200 mm, number of broaching positions: 4, broaching speed: 25 m/min, workpiece diameter (max.): 460 mm, total length: 1,717 mm, total width: 1,221 mm, total height: 1,885 mm, Special Offer – 5% Discount Available! Metal Slotting Machine B5020 – 200 mm Stroke The Metal Technics Polska B5020 Metal Slotting Machine is a professional industrial machine designed for machining keyways, splines, internal grooves and other precision slotting operations. Its rigid construction, large rotary table and automatic feeds ensure excellent machining accuracy, high productivity and reliable operation. The machine is ideal for tool rooms, maintenance departments and manufacturing facilities. With a maximum slotting force of 5 kN, a 200 mm ram stroke and a 360° rotary table, it is suitable for a wide range of precision machining applications. Main Features * 200 mm ram stroke * Heavy-duty industrial construction * Ø460 mm rotary table * Automatic longitudinal, cross and rotary feeds * Adjustable ram inclination * Maximum slotting force: 5 kN * High machining precision * CE certified Technical Specifications * Model: B5020 * Maximum ram stroke: 200 mm * Stroke speeds: 32 / 50 / 80 / 125 strokes/min Hodpfxezf Huio Ap Hont * Ram inclination: 0°–8° * Vertical ram adjustment: 200 mm * Table diameter: 460 mm * Maximum table load: 400 kg * Longitudinal table travel: 420 mm * Cross table travel: 420 mm * Table rotation: 360° * Maximum tool size: 25 × 40 mm * Maximum slotting force: 5 kN * Main motor power: 3 kW * Feed motor power: 0.7 kW * Machine dimensions: 1717 × 1221 × 1885 mm * Machine weight: 2200 kg Applications * Keyway machining * Internal splines * Internal grooves * Slotting operations * Tool rooms * Maintenance workshops * Metalworking * Industrial manufacturing Transport and Delivery The machine is supplied brand new and includes a 12-month warranty, CE Declaration of Conformity, technical documentation, warranty and professional after-sales support. Spare parts are readily available. We provide professional transport throughout Europe using specialized machinery logistics. Every machine is securely loaded, protected during transport and delivered directly to the customer's premises. We also assist with export documentation and international shipping arrangements. Worldwide shipping is available upon request. About Metal Technics Polska Metal Technics Polska is a manufacturer and distributor of professional metalworking machinery. We supply high-quality machines throughout Europe and provide expert technical advice, spare parts and comprehensive after-sales support. Contact us today for pricing, delivery times, machine availability, additional photos, videos or a personalized quotation.

Condition: excellent (used), Cintex Metal Detector Model - Sentry Hnedpozzk Urofx Ap Hot In excellent condition Belt dimensions 1800 belt x 500 Aperture head 510mm W x 310mm high Alarm and stop feature This metal detector has retail and wholesale specifications Test pieces included

Condition: excellent (used), Year of construction: 2016, Loma Systems Metal Detector with Rejector Model: IQ³ Model conveyor: MD Conveyor, serial number: G7B3C2RS-35150D Year of construction: 2016 220-240 V, 1 Ph, 50/60 Hz, 3 A Hnjdpov T Ah Eofx Ap Hot Belt width: 300 mm, clearance: 350 mm x 150 mm Total dimensions: 2020 mm x 1080 mm x 1120 mm

Condition: new, functionality: fully functional, Year of construction: 2026, Equipment: CE marking, documentation/manual, Technical data: Working width: 2540 mm Maximum sheet thickness: 2.5 mm Maximum bending angle: 135° Length: 2880 mm Width: 1020 mm Height: 1450 mm Weight: 1300 kg Delivery to the customer is possible. The delivery cost is determined individually according to the quotation of the transport company. If you are interested in other machines, we encourage you to visit our website. Hjdpfx Apeytpars Hsnt

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1985, machine/vehicle number: 8444-08, workpiece length (max.): 6,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum edge length: 6,000 mm Maximum material thickness: 1.25 mm Mechanical cutting device Hydraulic unit Flow rate of gear pump: 14.5 l/min Operating pressure: 140 bar Maximum pressure: 210 bar Electric motor power: 3 kW Motor speed: 1,450 rpm Voltage: 380 V Frequency: 50 Hz Oil tank capacity: 30 l Pressure gauge diameter: 63 mm Pressure gauge display range: 0–250 bar Pressure switch: 90 bar Hydraulic components Gear pump CPL 9 DQ Intermediate flange L25-2/004 Elastic coupling G 228/2P Return filter Fill and vent filter Oil level indicator Drain plug Glycerine pressure gauge Valve block with pressure, flow control, braking, and solenoid valves Hydraulic cylinders Number of hydraulic cylinders: 8 Type: GHZ-50 × 225-S spec. Piston rod with external thread M20 Length: 20 mm Swivel bearing at the rear Hydraulic motors Number of hydraulic motors: 4 Type: OMP 50 MACHINE DETAILS Control system Electrical machine control with operator panel (OP) Adjustable dwell times, angle ranges, and shutdown delays Variant control for different machine functions EPROM-based control Electrical supply Mains voltage: 380 V Frequency: 50 Hz EQUIPMENT Hydraulic unit OP-14 SM 8 hydraulic cylinders GHZ-50 × 225-S spec. 4 hydraulic motors OMP 50 Hnodpfx Aozy Ndcjp Hjt Gear pump CPL 9 DQ Valve block with hydraulic valves Return filter Fill and vent filter Oil level indicator Glycerine pressure gauge Pressure switch Electrical OP control Hydraulic and electrical circuit diagrams

Condition: new, Year of construction: 2026, turning diameter over cross slide: 255 mm, spindle bore: 52 mm, turning diameter: 410 mm, turning length: 100 mm, total length: 1,940 mm, total width: 850 mm, total height: 1,320 mm, bed width: 250 mm, rotational speed (max.): 1,800 rpm, rotational speed (min.): 45 rpm, type of input current: three-phase, overall weight: 1,550 kg, Technical data Turning diameter over bed: 410 mm Turning diameter over cross slide: 255 mm Turning diameter in gap: 580 mm Turning length in gap: 190 mm Distance between centers: 1000 / 1500 / 2000 mm Bed: induction hardened Bed width: 250 mm Spindle bore: 52 mm Spindle nose: D1-6 Spindle taper: Morse taper No. 6 Spindle speed range: (16) 45 – 1800 rpm Maximum tool size: 20 x 20 mm Longitudinal feed range: (17) 0.05 – 1.7 mm/rev Cross feed range: (17) 0.025 – 0.85 mm/rev Metric threads: (42) 0.2 – 14 mm Inch threads: (45) 2 – 72 T.P.I Module threads: 0.3 – 3.5 M.P. Diametral pitch threads: 8 – 44 D.P. Tailstock quill diameter: 50 mm Tailstock quill travel: 120 mm Tailstock taper: MT4 Digital readout: 3-axis DRO Coolant pump power: 0.1 kW Overall dimensions (L x W x H): 1940 x 850 x 1320 mm Motor power: 3.3 kW Weight: 1550 kg Equipment 3-jaw chuck 200 mm 4-jaw chuck 250 mm Faceplate 250 mm Driving plate 350 mm Steady rest Follow rest Spindle reduction sleeve Dead center Coolant system Halogen work light Thread dial indicator Tool kit Sales conditions The machine is brand new. 12-month warranty Warranty service Post-warranty service Hedpfsytnznsx Ap Hsnt Delivery to the customer is possible. Delivery cost according to the individual quotation of the transport company. If you are interested in other machines, please visit our website.

Condition: good (used), Year of construction: 1978, Scissor lift table, scissor lift table, scissor lift platform, scissor lifting platform, single scissor lift table, low-profile lift table, scissor lift truck -Manufacturer: i-lift, hydraulic scissor lift table trolley, scissor lift trolley type FH 3/6T -Load capacity: 300 kg -Platform: 600 x 600 mm -Dimension when retracted: Height 590 mm -Extended dimension: Height 1310 mm Hsdpfx Apez A Tq Ao Hont -Quantity: 1x scissor lift truck available -Transport dimensions: 810/600/H980 mm -Weight: 105 kg

Condition: new, functionality: fully functional, Year of construction: 2026, bending angle (max.): 135 °, total length: 1,500 mm, total width: 350 mm, total height: 530 mm, warranty duration: 12 months, Manual Sheet Metal Bending Machine The bending machine allows the production of complex profiles and bends. Thanks to the segmental design, it is possible to perform advanced sheet metal forming operations. Our model features an improved construction – thanks to the simple and quick removal of segments, it is possible to bend channels, boxes and similar shapes. The segments on the upper beam are mounted with Allen screws. Tilting by means of a handle Upper clamping beam with a 45° apex angle Easy positioning of the upper clamping beam; removable segments for box bending The machine is equipped with a deflection compensation adjustment system (when bending thicker sheets it eliminates the so-called “banana effect”) Technical Specifications Working length: 1220 mm Maximum sheet thickness: 1.5 mm Maximum opening height: 30 mm Bending angle: 0–135° Dimensions (L × W × H): 1500 × 350 × 530 mm Weight: 165 kg Hjdpfxeytfabj Ap Hjnt Segments: 5 × 50 mm / 6 × 76 mm / 5 × 102 mm SEGMENT SHEET METAL BENDING MACHINE 1220 × 1.5 MTP 165 KG Delivery Terms The machine is brand new 12-month warranty Warranty service Post-warranty service CE Declaration of Conformity Technical documentation (DTR) in English Delivery to the customer is possible. The delivery cost is determined individually based on the carrier’s quotation. If you are interested in other machines, we encourage you to visit our website.

Year of construction: 2011, operating hours: 8,350 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: WJ2010-1Z-SJ-S Smart Jet Strong, PTV Waterjet WJ2010-1Z-SJ-S Smart Jet Strong for sale For sale: PTV WJ2010-1Z-SJ-S Smart Jet Strong waterjet cutting machine. Professional CNC waterjet from PTV for the precise cutting of various materials. Thanks to waterjet cutting, materials can be processed without heat input, eliminating material deformation. This machine was used in our production process and is being offered for sale due to the termination of our business operations. Machine specifications: Brand: PTV Type: WJ2010-1Z-SJ-S Model: Smart Jet Strong CNC-controlled waterjet cutting machine Working area: cutting bed 2400x1000mm Year of construction: 2011 Operating hours: 8350 High-pressure pump: 4000 bar Includes: software / abrasive system / pump / water treatment / etc. The waterjet is suitable for cutting various materials and material thicknesses, making it a versatile machine for industrial production and custom work. The machine is currently still installed and can be inspected in working order by appointment. If you are seriously interested, please do not hesitate to contact us. Additional photos, videos, and technical data are available upon request. Hnedpsz A Aa Hefx Ap Hst