Used Mechanical Press Brake for sale (47,380)

Condition: ready for operation (used), Year of construction: 2001, operating hours: 35,900 h, General Data Measurements width 2100 mm Measurements depth 2700 mm Measurements height 2900 mm Machine weight 9050 kg Control Unit Brand TRUMPF Model n/a Main Drive Pressing force 850 kN Bending length 2050 mm Dwjdpfxjxirh Ns Adujc Stroke 365 mm This TRUMPF TrumaBend V85 press brake was manufactured in 2001. It features a pressing force of 85 tons, a stroke of 365 mm, and a bending length of 2050 mm. Equipped with DALEM CNC 3D software, it offers high working speed and precise control. Additional features include hydraulic clamping and motorized CNC back gauge systems. Consider the opportunity to buy this TRUMPF TrumaBend V85 press brake. Contact us for more information about this machine. Application Types Bending

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, operating hours: 12,096 h, Amada hydraulic press brake type HFT 130-3 working width 3100 mm max. pressing force 130 tons CNC-controlled Y1 Y2 X and R axes CNC control CNC OP 2000 Fiessler light curtain Drive power 12.5 kW Weight 8200 kg Dwjdoxhfuyjpfx Adujc

Condition: defective spare-parts repository (used), functionality: unexamined, Year of construction: 1983, machine/vehicle number: K2062, control type: CNC control, working width: 4,000 mm, overall weight: 7,500 kg, power: 7.5 kW (10.20 HP), input voltage: 380 V, input current: 16 A, input frequency: 50 Hz, Equipment: lower tooling, upper tooling, We are selling our Safan CNCB 110-4300 press brake from 1983. The machine comes with two tooling sets and extensive documentation. A few months ago, the hydraulic pump failed, but we were able to procure brand-new replacement parts, including the cartridge. The machine is now reassembled, can be switched on, and is filled with oil. At present, there appears to be a minor issue with the oil pump or the pump's check valve. When the pump is started, the circuit breaker trips due to overload. This seems to be only a minor fault. The machine is being sold as defective and without any warranty. Please note the machine weighs 7.5 t for collection. The tooling is segmented and features a Promecam-style clamp. Dsdpfjxl D Dbsx Aduswc We can assist with loading using our own crane. Transport arrangements, including a low-loader due to the height, are the buyer's responsibility.

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 170 h, degree of automation: automatic, working width: 5,100 mm, pressing force: 320 t, Equipment: emergency stop, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, TOSKAR press brake Pressure 320 tons Bending length 5100mm Dwsdpswq Aa Iofx Adujc Bending length between columns 4100mm Speed of approach movement 100 mm/s Speed of bending movement 9 mm/s Speed of return movement 100 mm/s Opening 300 mm Distance to columns 500mm Year 2015 Only 170 working hours 5 Axes Y1, Y2, X, R, deflection arrow CNC controller with NexT touch screen

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2004, machine/vehicle number: P-1843, actuation type: hydraulic, controller model: Siemens Sinamics G110, bending force (max.): 80 t, overall weight: 5,500 kg, TECHNICAL DETAILS Bending force: 80 t Lowering speed: 80 mm/s Safety distance: 1,500 mm MACHINE DETAILS Dwodexlthcopfx Aduec Control: Siemens Sinamics G110 Dimensions & Weight Dimensions (L x W x H): 2,800 x 2,150 x 2,700 mm Machine weight: 5,500 kg IP protection class: 54

Condition: used, functionality: fully functional, INDUMAC FOLDING MACHINE 4000 X 100 TON WITH REGISTER Dsdpsxltgxsfx Aduewc USED MACHINE INTERNAL CODE: SVR 290

Year of construction: 2001, condition: ready for operation (used), General Data Measurements width 1400 mm Measurements depth 3000 mm Machine weight 95000 kg Djdpfx Ajxg Unajduowc This Müller HUQ 630.30 was manufactured in 2001. A robust mechanical stamping press with a nominal force of 6300 kN and a stroke rate of 15–60 strokes/min. It features a slide adjustment of 200 mm and can handle coil widths from 60 to 600 mm. Ideal for steel and aluminium, it supports a maximum coil weight of 6 tons. Consider the opportunity to buy this Müller HUQ 630.30 mechanical stamping press. Contact us for more information. Application Types Stamping

Condition: new, Year of construction: 2021, Press brake Bernardo AKPL 1600 x 40 Technical data: Pressure force: 40 to bending length: 1600 mm distance between stand:1200mm stroke length: 100 mm Backgauge: 0 - 500 mm Projection: 200 mm table width: 150 mm table height: 760 mm Forward speed: 60 mm/sec Bending speed: 8 mm/sec Return speed: 60 mm/sec. oil tank: 130 litres Engine power: 4,0 kW width: 2050 mm Djdpfjftuywex Aduswc depth: 1800mm height: 2030mm Weight ca.3030 kg

Condition: good (used), functionality: fully functional, Year of construction: 2004, The machine is in good technical condition. Nominal forming force: 65t Working length: 2550mm Weight: 5500 kg Inspection in operation is possible by prior arrangement. Dsdpfx Adexlr T Reuewc

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, Metallkraft press brake Pressure 100 tons Bending length 2550mm Bending length between columns 2200mm Speed of approach movement 180 mm/s Dodjwni Nwjpfx Adujwc Speed of bending movement 10 mm/s Speed of return movement 120 mm/s Opening 265 mm Distance to columns 410mm Motor 11 kW Year 2015 7 Axes Y1, Y2, X, R, Z1, Z2, deflection arrow CNC Cybelec ModEva 15T touch screen 15"

Condition: used, Year of construction: 2018, _____ Dwsdpfx Adjxgpwpsuec Description: Year of manuf. : 2018 Control : Technical data Bending length:4080 mm Pressing force:170 t Column passage:4404 mm Tools:included in the scope of delivery Equipment Axis stop:4-axis Angle measuring system:ACB Laser Manual Support bracket:1x

Condition: good (used), functionality: fully functional, Year of construction: 2010, Used 4-meter CNC press brake from Bystronic Model: Xpert 200 4100 Year of manufacture: 2010 Capacity: 4100 x 200 tons Cybelec VisiTouch PAC CNC control (latest model) CNC controlled axes: Y1, Y2, X1, X2, R1, R2, Z1 and Z2 CNC hydraulic crowning Dwodpfx Aexgngisdusc Hydraulic upper clamping (RFA) Hydraulic lower clamping (WILA - 13 mm) Hydraulic flat die in lower table Automatically adjustable AKAS Fiesller laser safety system

Year of construction: 2012, condition: ready for operation (used), Main Drive Djdpfx Aow Rharjduswc Number of axis 4 This 4-axis LVD PPEC 135/30 press brake was manufactured in 2012. It features hydraulic clamping for enhanced efficiency and requires no tools for operation. Consider the opportunity to buy this LVD PPEC 135/30 press brake. Contact us for more information about this machine. Application Types Bending

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Cybelec, controller model: DNC 880, bending force (max.): 175 t, working width: 3,050 mm, stroke length: 265 mm, installation height: 530 mm, operating speed: 120 mm/s, reverse speed: 100 mm/s, number of axes: 4, table height: 900 mm, type of crowning: CNC-controlled, oil tank capacity: 200 l, travel distance X-axis: 650 mm, back gauge adjustment: CNC-controlled, back gauge travel distance R-axis: 250 mm, overall weight: 11,250 kg, total length: 4,570 mm, total width: 2,360 mm, total height: 2,900 mm, power: 18.5 kW (25.15 HP), Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, electro-hydraulic CNC press brake - Two synchronized cylinders with HIGH PERFORMANCE hydraulic components - Equipped with CYBELEC CNC control unit - DNC 880S - * 2D graphic display for visualization and multi-stage simulation * Graphic 2D programming * User-friendly operation * Automatic bending sequence calculation and collision detection * Extensive product and tool library * Automatic tonnage (pressure) calculation - Swiveling operator panel mounted front right - CNC controlled axes: Y1 + Y2 + X + R + CNC crowning - Upper beam with heavy-duty four-guide system - CNC electric backgauge (X axis) * with 2x manually adjustable backgauge fingers * Adjustment range up to max. 650 mm - CNC electric height adjustment of backgauge (R axis) * Adjustment range up to max. 250 mm - CNC electric table crowning Dwodpfx Asxlizxeduec - AMADA/PROMECAM upper tool clamping * incl. segmented upper tool set - AMADA/PROMECAM lower tool holder, incl. die * incl. segmented single-V die (V=20 mm) - FIESSLER LASER safety device at the front - 2x front, movable support arms (sliding system) - Side safety enclosure (pivoting doors) - Rear safety enclosure (pivoting door) - 1x movable foot switch - Large hydraulic oil tank to maintain low operating temperature - Original operating manual

Condition: good (used), Bending length / working length: 2,500 mm Pressing force / bending force: 1,500 kN (≈ 1,500 kN) Max. sheet thickness (steel): approx. 2.0 mm Max. sheet thickness (aluminium): approx. 3.0 mm Max. sheet thickness (stainless steel / higher tensile strength): approx. 1.25 mm Max. bending height: approx. 300 mm (depending on model) Dwjdpfx Aexgh T Ajdusc Power / capacity (electric): 24 kW Machine dimensions: 4,050 × 1,600 × 2,400 mm Weight ~ 13,000 kg

Condition: new, MECHANICAL SCREW PRESS FOR STACKING U-JOINTS PRK-2 Dwsdpfx Adspbwdljusc Designed for staking u-joints as well as assembly and dissasembly of driveshafts during repair and remanufacturing process Press can be used for the assembly and replacement of cardan joints in the repair and production of cardan shafts, as well as for other processes in which the pressing operation is used. This press is designed for use in a repair shop and does not require any special knowledge for operation and maintenance. Manual feed ensures precision and quality of stacking process. The pressing mechanism is based on a ball screw, which has a high efficiency and a long service life. Technological tooling for replacing stacked u-joints: • Centering housing for the punches. • Set of 8 bits for punching crosses with diameters from 20 to 31 mm for drive shafts. • Set of 4 bits for punching crosses with diameters from 15 to 19 mm for steering shafts. SPECIFICATIONS Working area (L x B x H) 322х312х350 mm Maximum compression force 5500 kg Maximum force on rupture 2000 kg Dimensions (length x width x height) 402х488х1478 mm Weight 160 kg ! We manufacture а full range of equipment for drive shaft balancing and repair service. Please contact us to get the best offer!

Condition: used, Year of construction: 2018, _____ Description: Year of manuf. : 2018 Control : technical Data Pressing force:130 t Working length:3m Stroke:445 mm Working speed:25 mm/s Increased installation height:Stroke +230 mm Crowning:CNC controlled Back gauge:5-axis with 2 fingers Upper/lower tool clamping:Hydraulic Screen:2 pieces Control system:Touchpoint TruBend Tools:included in the scope of delivery Equipment :- ACB Automatically Controlled Bending :- Angle assistance package :(consisting of ACB Wireless and TCB) :- MobileControl Pro :- Tool lndicator :- Part lndicator :- Work area lighting front and rear :- 2 Support console with plastic support :- 2 Table extension Dodpfx Asxgpr Teduswc :- BendGuard :Operator ergonomics :- Foot switch :- Communication rail :- MobileControl ToolMaster KB29 :Machine:stable steel architecture with concrete foundation :Upper tool storage with CNC rotary axis :Lower tool storage with CNC rotary axis :Push chain manipulators for upper and lower tools :Magnetic gripper system :Positioning monitoring :CNC turning and transfer station for upper tools :Transfer station for lower tools :Right-hand installation :Control cabinet air conditioning up to ambient temperature 40° C :Control LENZE, linked with machine control of TruBend :integrated in machines Design :Safety Light curtain (vertical and horizontal) with fixed reflector

Condition: ready for operation (used), Year of construction: 1999, Immediately available ex location: Hydraulic CNC press brake Beyeler Type PR 10, 400KN x 7200 Year of manufacture 1999 CNC control CNC 900 Dwjdpfxoxlfaqj Adujc Bending length 7200 mm Distance between uprights 6500 mm Press force 400 t Distance table – ram 500 mm Stroke 365 mm Drive 37 kW Weight 52 t 4 sets of tooling At a price of EUR 49,000.— plus VAT, ex location

Year of construction: 2006, condition: ready for operation (used), General Data Machine weight 5500 kg Main Drive Number of axis 3 Dwodpfxsxgwdwo Adujc Additional Equipment Laser Guidance: Ensures precise and fast operation. High-Speed Modes: Extremely efficient and quick operating capabilities. User-Friendly Programming: Easy-to-use interface with a large memory capacity, capable of storing over 10000 part files and programs. This 3-axis Safan E-Brake 80-2550-Ts3 CNC press brake was manufactured in 2006. Ideal for precision bending applications, it offers robust performance and reliability. Consider the opportunity to buy this Safan E-Brake 80-2550-Ts3 CNC press brake. Contact us for more information. Application Types Bending

Condition: good (used), Year of construction: 2004, operating hours: 32,103 h, Bending length [mm]: 4080.00 Pressing force [t]: 200 Control system: Delem DA69 on Windows Standard equipment: + Upper drive concept in twin-cylinder design Y1/Y2 + Electrohydraulic ram drive with proportional valve technology + Ram travel measuring system with deflection compensation via glass scales Dodpfsxghi Dox Aduewc + Modern block hydraulics + Spherical suspension and inclined positioning of the ram + CNC backgauge system + Safe manual adjustment of fingers from the front + 2 stop fingers + Self-centering, manual, hardened upper tool holder for vertical tool change + Hardened, manual lower tool holder + Programmable lower tool shift (I-axis) for 2 positions + Flat front cover + Modern safety enclosure + CE marking + Oil cooler + Operating manual Special equipment: - 5-axis backgauge system (X, X1, R, Z1, Z2) - Hydraulic upper tool clamping - Hydraulic lower tool clamping - CNC crowning - BendGuard safety system - ACB preparation

Condition: excellent (used), Year of construction: 2010, Technical specifications: Working length: 1020 mm Frame gap: 932 mm Pressing force: 36 t CNC control: TASC 6000 Number of controlled axes: 6 Stroke: 120 mm Working height: 1150 mm Electronic direct drive Automatic tool clamping CE marking Dimensions (L x W x H): approx. 1950 x 1350 x 2400 mm Weight: approx. 2.6 tonnes Accessories: Inductive length measuring system and temperature compensation Control cabinet cooling Side safety doors Dwodoxlcccopfx Adujc The seller is not liable for typing or data transmission errors. The machine's condition regarding appearance, technology and wear is commensurate with its age; used machines are sold without any guarantee.

Condition: good (used), functionality: fully functional, Year of construction: 2007, operating hours: 13,800 h, AMADA ASTRO II 100 NT bending cell Automatic bending/folding cell - press brake with bending robot Manufacturer: AMADA Type: ASTRO 100 NT Year of construction: 2007 Condition: used Control: AMNC II PC Switch-on hours: 38536h Automatic operation: 13739h Pressing force: 100 tons bending length: 3000 mm Tool clamping: AMADA, standard Dwodpfxoxgbmcs Aduec Clearance between uprights: 2700 mm Projection: 415 mm Stroke: 200 mm Installation height: 500 mm Adjustment range backgauge: 600 mm Width of the work table: 60 mm

Year of construction: 2020, condition: new, Upper tool 60 °, R = 10.0mm, H = 220mm, W = 60mm, L = 2500mm divided into 5x300mm + 5x200mm with safety pins UKB system TRUMPF (like 15730) BRAND NEW Dwedpfjfz Nz Djx Aduoc

Condition: ready for operation (used), Year of construction: 1986, Immediately available ex location: Hydraulic Press Brake LVD Model PPN 200/40 Dsdpfx Asxld Umjdujwc Year of manufacture: 1986 Pressing force: 200 t Working length: 4100 mm Distance between uprights: 3050 mm Throat depth: 250 mm Stroke: 175 mm Table – ram gap: 425 mm Drive power: 11 kW Approach speed: 90 mm/sec Working speed: 6 mm/sec Return speed: 55 mm/sec Weight: 15 t Complete set of tools Price: EUR 7,500 plus VAT

Condition: ready for operation (used), Year of construction: 1973, Immediately available from location: Hydraulic press brake Lotze Model PZ 125 Year of manufacture: 1973 Pressing force: 125 t Working length: 3500 mm Distance between uprights: 2500 mm Throat depth: 250 mm Stroke: 175 mm Installation height: 400 mm Djdpjxldugsfx Adujwc Back gauge Drive: 10 kW Weight: 10 t Complete set of tooling Price: EUR 6,000—plus VAT ex location.