Used Mechanical Press Brake for sale (30,519)

Condition: excellent (used), Year of construction: 2002, Operating hours: 38,516 h Gbodoyyybbspfx Acwjk Press force: 500 kN Stroke: 215 mm Operating pressure: 290 bar Overrun time: 48 ms Safety distance: 77 mm

Condition: good (used), Year of construction: 1997, Pressure 160 t Gbedpfx Acetx Ugnjwok folding length 3550 mm stroke 300 mm Weight 15400 kg

Condition: good (used), Year of construction: 1992, Press force: 110 t Bending length: 3550 mm Frame gap: 3050 mm Throat depth: 400 mm Ram stroke: 200 mm Gbedpfxsyyvaae Acwjk Control: Cybelec DNC 70 Drive power: 15 kW Weight: 9500 kg

Condition: good (used), Year of construction: 2013, pressing force: 175 t, stroke length: 265 mm, clearance between the columns: 2,550 mm, total length: 4,250 mm, total width: 2,550 mm, total height: 2,750 mm, overall weight: 11,500 kg, Equipment: - 2 support arms - DELEM DA 66 T control - Controlled axes: Y1 - Y2 - X - R - Crowning - Side safety doors - AMADA tool holder Gbsdpfx Acsyyk D Hewjk - Foot switch

Condition: good (used), Year of construction: 2015, pressing force: 100 t, stroke length: 265 mm, clearance between the columns: 2,050 mm, total length: 4,200 mm, total width: 1,800 mm, total height: 2,900 mm, overall weight: 7,900 kg, Equipment: - 2 support arms - DELEM DA 66 T control system - Foot switch Gbedpfx Ajyyk Avscwok - AMADA tool holder - Crowning - Controlled axes: Y1 - Y2 - X - R - Side safety doors

Condition: ready for operation (used), Year of construction: 2019, machine/vehicle number: 83966, functionality: fully functional, pressing force: 150 t, TECHNICAL DETAILS Pressing force: 150 t MACHINE DETAILS Gedpsyykvpofx Acwobk Machine weight: 9,500 kg EQUIPMENT Fastbend 2D control on Y1, Y2 and X axes Euro tool clamping A complete set of tools

Condition: good (used), Year of construction: 2004, Used Safan E Brake press brake Type: E Brake 50 2050 HS TS1 Capacity: 2050 x 50 ton WIla clamping with 1 set of tools TS1 CNC control Y1, Y2, X, R, Z1 and Z2 CNC controlled Gbodpfx Aceyykk Hewjk HS High Speed version

Condition: good (used), Year of construction: 2003, Used 2.5 meter press brake from Ermaksan Model: AP 2600 60 Capacity: 2600 x 60 tons Elgo NC control 1 set of tools Year of manufacture: 2003 Gbjdpjyykkmofx Acwek

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, input voltage: 380 V, input current: 13 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 50 t, overall weight: 50,000 kg, working width: 2,500 mm, For sale is a GÉFI LE50/2500, Hungarian-made edge bender in excellent condition, in working condition, can be tested. Technical data of the pres brake : Manufacturer: GÉFI Type: LE 50/2500 Year of manufacture: 1983 Pressing force: 50 tons Maximum bending length: 2500 mm Gbjdpoyznhlsfx Acwek Dimensions: 2720x1550x2245 mm Weight: 5500 kg We are adding 1 1500 mm and 1 2500 mm knife, these need to be renovated.

Condition: excellent (used), Technical Data: Working length: 3100 mm Distance between uprights: 2560 mm Pressing force: 220 t Gbjdpfxjyzm Nho Acwek CNC control: OPERATOR II grafic Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Bending simulation automatic crowning motorized adjustable backgauge Throat depth: 650 mm Stroke: 200 mm Working height: 960 mm Laser safety system: FIESSLER Motor power: 17 kW CE marking Dimensions (LxWxH): approx. 3700 x 2400 x 2900 mm Weight: approx. 15 tons Accessories: 1 set of tooling: 1 upper tool 120 mm 1 lower tool, segmented die: V 50, 35, 22, 16 Condition: Very good condition, complete overhaul in 2026 The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear are age-appropriate; used machines are sold without any warranty.

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: 6430025, functionality: fully functional, stroke length: 215 mm, overall weight: 10,000 kg, controller model: Cybelec ModEva 12 CNC, bending force (max.): 150 t, working length: 3,100 mm, TECHNICAL DETAILS Working length: 3,100 mm Bending force: 150 t Maximum stroke: 215 mm Descent speed: 190 mm/s Working speed: 10 mm/s Return speed: 150 mm/s MACHINE DETAILS Control: Cybelec ModEva 12 CNC CNC-controlled axes: Y1, Y2, X, R, Z1, Z2 Weight: 10,000 kg Main motor power: 11 kW Total connected load: 15 kW Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Gbedpoyyb D Rjfx Acwjk Nominal pre-fuse current: 35 A Hydraulic operating pressure: max. 300 bar Pneumatic operating pressure: max. 8 bar Overrun distance: 9 mm EQUIPMENT Hydraulic upper clamp: RFA Hydraulic lower clamp: WILA 13 mm Complete tool set (model: P5)

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: 25084, functionality: fully functional, stroke length: 400 mm, controller model: Cybelec DNC 800 CNC, bending force (max.): 250 t, working length: 6,100 mm, TECHNICAL DETAILS Press force: 250 t Working length: 6,100 mm Stroke: 400 mm MACHINE DETAILS Gsdpfx Acoyybziowsbk Control system: Cybelec DNC 800 CNC Number of axes: 4 (Y1, Y2, X and R) Connection: 400 V Pressure: 290 bar Noise level: 65 dB(A) Weight: 24.5 t EQUIPMENT Hydraulic CNC crowning for precise bending results Complete tool set

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: 6440022, functionality: fully functional, stroke length: 415 mm, overall weight: 17,600 kg, controller model: Cybelec ModEva12 CNC, bending force (max.): 200 t, working length: 4,100 mm, TECHNICAL DETAILS Bending force: 200 t Working length: 4,100 mm Stroke: 415 mm Rapid traverse down: 190 mm/s Working speed: 10 mm/s Rapid traverse up: 150 mm/s MACHINE DETAILS Control system: Cybelec ModEva12 CNC Axes: Y1, Y2, X, R, Z1, Z2 Weight: 17,600 kg Gbjdpfxeyybw Re Acwsk Main motor power: 18.5 kW Total connected load: 22 kW Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Pre-fuse rated current: 50 A Hydraulic operating pressure: max. 310 bar Pneumatic operating pressure: max. 8 bar Overrun distance: 8 mm EQUIPMENT Hydraulic RFA upper clamping Hydraulic WILA NS lower clamping Hydraulic CNC crowning Complete tooling set (model: P5)

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, pressing force: 40 t, Equipment: CE marking, safety light barrier, 1 used Haco 1.6metre x 40ton simple cnc pressbrake for sale Euro style tooling and tool holders Gbodpoyzi Dhjfx Acwek 3axis - Y1 Y2 and X axis

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, pressing force: 90 t, Equipment: CE marking, 1 Used Morgan Rushworth year 2019 2.6metre x 90ton Downstroke Cnc pressbrake for sale Model: PBS CNC 2600/90 Year: 2019 Gbjdpfx Acoyziugewjk With modern ESA touch screen cnc control 4axis in total - 2 axis back gauge Euro style tooling and tool holders Upper and Lower Tooling VIDEO AVAILABLE UPON REQUEST

Condition: new, Clutch-brake series УВ 31… for presses type КД2324, КД2124, КД2324К, КД2124К, КД2324Е, КД2124Е, КД2128, КД2328, КД2128К, КД2328К, КД2128Е, КД2328Е, КД2126, КД2326, КД2126К, КД2326К, КД2126Е, КД2326Е, H-3222A, HA-3223, HA-3225, H-475, H-481, H-483. The offered brake is new and has 100% confirmed correctness and efficiency of operation. It is also possible to purchase spare parts such as brake discs, friction linings, bushings, body pins, flywheel pins, springs and a set of seals. We offer clutch-brake type: YB3132, YB3135, YB3138, YB3141, YB3144, YB3146 for various guillotines and presses of former USSR origin. The weight of the complete clutch - depending on the specific type - ranges from 200-300 kg. Our offer also includes other parts and accessories for metalworking machines of Russian production (former USSR). Gjdev Saxrepfx Acwjbk

Condition: good (used), Year of construction: 1987, machine/vehicle number: 8754-08, Offer 26124 Technical Data: - Max. working width: 6050 mm - Max. material thickness at 40 kp/mm² tensile strength, steel: 1.0 mm - at 20 kp/mm² tensile strength, aluminium: 1.5 mm - at 80 kp/mm² tensile strength, V4A: up to 0.6 mm - Electronic bending angle preselection Gbsdpfxoyzgqlj Acwek - Hydraulic lifting and lowering of the upper beam and bending beam - Manual rotary shear - Drive: 400 V - Space required: approx. W 6800 x H 1550 x D 1700 mm - Weight: approx. 1900 kg

Condition: good (used), functionality: fully functional, pressing force: 110 t, working width: 3,100 mm, back gauge: 1,500 mm, distance between stands: 2,550 mm, Bending capacity: 110 Ton Bending length: 3.100 mm Distance between columns: 2.550 mm Back gauge: 1.500 mm Stroke length: 150 mm Throat: 250 mm Gedswi N T Eopfx Acwsbk Rapid approach speed: 100 mm/sec. Bending speed: 8 mm/sec. Return speed: 65 mm/sec. Controller: ESA Kvara S630 Touch Featured with: - Foot pedal - Various tool sets - Light screen security Merlino - Controls renewed in 2018 Country of origin: The Netherlands Motor power: 7,5 kW Machine LxWxH: 320 x 160 x 244 cm Machine weight: 8.700 kg

Condition: good (used), functionality: fully functional, stroke length: 300 mm, throat depth: 450 mm, controller manufacturer: Delem, controller model: DA65, working width: 4,300 mm, bending force (max.): 300 t, distance between stands: 3,700 mm, control type: CNC control, number of support arms: 2, number of axes: 4, type of crowning: CNC-controlled, actuation type: hydraulic, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, Bending capacity: 300 Ton Gbjdpfoydpxvex Acwok Bending length: 4.300 mm Distance between columns: 3.700 mm Back gauge: 550 mm Stroke length: 300 mm Throat: 450 mm Rapid approach speed: 120 mm/sec. Bending speed: 10 mm/sec. Return speed: 120 mm/sec. Controller: Delem DA65 Featured with: - Y1, Y2, X & R-axis controlled - CNC Hydraulic crowning - Various sets of bending tools - Laser safe curtain Lazer Safe - Machine manual and documentation Country of origin: The Netherlands Motor power: 30 kW Machine LxWxH: 510 x 200 x 330 cm Machine weight: 21.500 kg

Condition: used, #200103 Trumpf EVO22W10 (without identification groove) 86.00° R1.00 / H=100.00 / 500 kN/m Segment lengths: 2x 25 mm 2x 30 mm 1x 35 mm 2x 40 mm 1x 45 mm 2x 50 mm 7x 100 mm 2x 200 mm 2x 300 mm 7x 500 mm ----- #200104 Trumpf EVO22W10 (identification groove at the bottom) 86.00° R1.00 / H=100.00 / 500 kN/m Segment lengths: 2x 40 mm 2x 45 mm 2x 50 mm 2x 200 mm 1x 300 mm 3x 500 mm ----- #200105 Trumpf EVO22W10 (identification groove in the center) 86.00° R1.00 / H=100.00 / 500 kN/m Segment lengths: 3x 25 mm 2x 30 mm 2x 35 mm 2x 40 mm 2x 45 mm 1x 50 mm 4x 100 mm 2x 200 mm 2x 300 mm 8x 500 mm ----- #200107 Trumpf EVO26W24 86.00° R2.50 / H=100.00 / 700 kN/m Segment lengths: 1x 30 mm 1x 35 mm 1x 40 mm 1x 45 mm 1x 50 mm 3x 100 mm 1x 200 mm 1x 300 mm Gedjyx Hxwjpfx Acwobk 4x 500 mm ----- #200108 Trumpf / Schmid EVO24W16 86.00° R1.60 / H=100.00 / 700 kN/m Segment lengths: 1x 25 mm 1x 30 mm 1x 40 mm 2x 45 mm 2x 50 mm 3x 100 mm 1x 200 mm 1x 300 mm 5x 500 mm ----- #200109 Trumpf EVO20W6 86.00° R0.60 / H=100.00 / 400 kN/m Segment lengths: 3x 100 mm 2x 200 mm (1x damaged) 6x 500 mm ----- #200110 Trumpf EVO22/S-W10 86.00° R1.00 / H=100.00 / 380 kN/m Segment lengths: 1x 40 mm 2x 100 mm 1x 200 mm 1x 300 mm 4x 500 mm

Condition: new, Year of construction: 2026, power: 55 kW (74.78 HP), pressing force: 1,250 t, stroke length: 510 mm, operating speed: 6 mm/s, reverse speed: 55 mm/s, throat depth: 810 mm, clearance between the columns: 7,100 mm, Equipment: CE marking, documentation/manual, safety light barrier, 1250 Ton 8.1 Meter CNC Press Brake – New / 12-Month Warranty Press brake machines are heavy-duty industrial equipment used for the precise, repeatable, and controlled bending of large sheet metals. The 1250 Ton CNC Press Brake by CRONOSSTECH is specifically engineered for heavy steel construction, energy sector applications, and large-scale industrial projects, offering an impressive 8100 mm bending length and high tonnage capacity. Key Advantages - High-precision bending up to 8.1 meters - 1250 ton maximum bending force - Advanced automation with ESA S840W CNC control - Servo-motorized X+R axis precision backgauge - WILA motorized crowning system for uniform bending - Heavy-duty, high-strength frame construction Typical Applications - Heavy steel structures - Energy and infrastructure projects - Shipbuilding and shipyard industry - Defense and heavy machinery manufacturing - Large sheet metal bending operations Standard Features - ESA S840W CNC control unit (3–8 axis) - 15.6” touchscreen, 2D graphic, and offline programming software - Automatic bending sequence and collision prevention - Angle measurement and automatic crowning correction - Servo-motorized X + R axis backgauge system - High-precision linear guideways and ball screw system - 2 rear backgauge fingers (3-stage) - Promecam quick tool clamping system (E20) - Eurostamp standard punch and die set - D-Series full enclosure safety system - Double foot pedal control (up / down) - GIVI linear scale (encoder) system - Schneider / Siemens electrical components - Hoerbiger (HAWE) hydraulic system, Parker pump - LED lighting and energy-saving mode - Heavy-duty front support arms - WILA motorized crowning system Technical Specifications - Bending Capacity: 1250 Tons - Bending Length: 8100 mm - Distance Between Uprights: 7100 mm - Stroke: 510 mm - Daylight Opening: 775 mm - Throat Depth: 810 mm - Table Height: 750 mm - Pit Depth: 2375 mm - Machine Dimensions (LxWxH): 10600 x 3650 x 4500 mm - Approach Speed: 70 mm/sec - Bending Speed: 6 mm/sec - Return Speed: 55 mm/sec - Oil Tank Capacity: 1000 L - Motor Power: 55 kW - Weight: 136,000 kg Optional Features - Advanced multi-axis backgauge systems (4–6–8 axes) Gbedpfsyzb Hnsx Acwjk - WILA hydraulic tool clamping systems - Hydraulic punch clamping for rollers - Extended table for Multi-Vee dies - 1000 mm X-axis stroke - AKAS / DSP laser safety systems - Additional backgauge fingers General Information - Country of Manufacture: Turkey - Warranty: 12 months - Condition: New and unused This machine is manufactured in Turkey by CRONOSSTECH.

Condition: new, Year of construction: 2026, power: 22 kW (29.91 HP), pressing force: 320 t, stroke length: 310 mm, operating speed: 9 mm/s, reverse speed: 110 mm/s, throat depth: 410 mm, clearance between the columns: 5,100 mm, Equipment: CE marking, documentation/manual, safety light barrier, 320 Ton 6 Meter CNC Press Brake – HPB C320-6100 – New / 12 Month Warranty Press brakes are essential production equipment that provide high precision, repeatability, and manufacturing efficiency in sheet metal bending operations. The HPB C320-6100 CNC Press Brake, manufactured by CRONOSSTECH, has a 320 ton bending capacity and a 6100 mm bending length, developed for precise and stable processing of large-scale sheets. Key Advantages - High-precision bending over 6 meters length - Advanced programming with ESA S840 CNC control unit - High-precision servo motorized backgauge system - Homogeneous bending with WILA crowning system - Heavy-duty frame and high stability - European origin hydraulic and electrical components Applications - Large-scale sheet metal bending applications - Steel structure manufacturing - Energy and infrastructure projects - Machinery and equipment production - Industrial manufacturing lines Standard Features - ESA S840 (3-6 axis) CNC control unit - 15.6” touchscreen, 2D graphics, and offline software - Automatic bending sequence and collision control - Angle measurement and automatic angle correction (crowning) - CRONOSS X+R axis servo motorized backgauge (±0.03 mm accuracy) - Hardened linear guide and ball screw system - 2 adjustable backgauge fingers - Promecam quick tool clamping system - Eurostamp standard punch & die set - Full protective enclosure (full cover) - Dual pedal (up/down control) - GIVI linear scale (encoder) system - Schneider / Siemens electrical components - Hoerbiger (HAWE) hydraulic block, Eckerle pump - LED lighting, energy-saving mode - Front support arms (high-strength, adjustable) - Manual WILA crowning system Technical Specifications – HPB C320-6100 - Bending Capacity: 320 Ton - Bending Length: 6100 mm - Distance Between Columns: 5100 mm - Stroke: 310 mm - Daylight: 535 mm - Throat Depth: 410 mm - Table Height: 1065 mm - Machine Dimensions (LxWxH): 8150 x 2655 x 3170 mm - Approach Speed: 150 mm/s - Bending Speed: 9 mm/s Godsyzb Ewopfx Acwebk - Return Speed: 110 mm/s - Oil Tank: 290 L - Motor Power: 22 kW - Weight: 27,000 kg General Information - Place of Manufacture: Turkey - Warranty: 12 Months - Condition: New and unused This machine is manufactured by CRONOSSTECH in Turkey.

Condition: used, Year of construction: 2003, pressing force: 120 t, table length: 3,000 mm, throat depth: 300 mm, clearance between the columns: 2,600 mm, total length: 3,460 mm, total width: 1,800 mm, total height: 2,600 mm, overall weight: 10,500 kg, Equipment: safety light barrier, Brand: DENER Model: DMP NC120-30 Pressing force: 120 tons Working width: 3000 mm Working width between columns: 2600 mm Throat depth: 300 mm Year of manufacture: 2003 Back gauge: electrically adjustable Includes safety light curtain Gjdpjyzanwjfx Acwsbk Control: NC control Neat machine, price excludes 21% VAT and excludes tools.

Condition: used, Year of construction: 1997, The bending press was manufactured in 1997 in England by EDWARDS PEARSON. The folding press is in good condition, sold with tools. Always serviced and maintained on time. The machine tools are connected and can be tested and inspected. Specification: Model: EDWARDS PEARSON 100/3100 PR6 Year: 1997 Working length: 3 100 mm Gedpfx Acsrfx Utjwjbk Bending capacity: 100 T Travel: 172 mm Distance between table and frame: 450 mm Working speed: 100 mm/s Return speed: 110 mm/s Axes: auto X1, X2, Y1, Y2, Z1 , Z2 , R Tools: Available Weight: 7 T Other: New screen recently replaced, keyboard attached for ease of use. If you have more questions, we will be happy to answer.

Condition: excellent (used), Year of construction: 2000, Type of machine HFE220-3L WILA TOOLING SYSTEM WITH FUL L LENGTH HYDRAULIC CLAMPING LARGE AMOUNT OF WILA TOOLING Maximum press force 2200 Minimum usable press force 260 Beam length 3220 Distance between frames 2700 Throat depth 420 Stroke length 350 Open height 620 Minimal increment 0.01 Positioning accuracy of the beam 0.01 Beam width 180 Table height 960 Approach speed without protection 10 Approach speed with protection 100 Maximum bending speed 10 Return speed 100 Motor power 18.5 Mains rating 20 Mains voltage 400 Mains frequency 50 Hydraulic oil capacity 295 Maximum hydraulic pressure 300 Gbodjv Rw Riepfx Acwsk Length overall +/- 10 mm 4360 Depth overall +/- 10 mm 2660 Height overall +/- 10 mm 3200 Weight approximate 15350