Used Mini Lathe for sale (7,507)

Condition: good (used), CNC Lathe with y-axis Geminis Goratu - GHT-4 G4-800 Max. turning Ø:800mm Length: 7000mm Width: 2500mm Height: 2500mm Lrjdpfx Aeygv Eusagjh Weight: 10000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, turning diameter over cross slide: 470 mm, turning length: 3,000 mm, turning diameter: 720 mm, spindle bore: 104 mm, CNC Lathe Geminis 4 Plus 720 x 3000 mm Description Manufacturer: Geminis Model: CNC 4 Plus Control: CNC Fagor 8055 FL-BT Capacities: Distance between centers: 3,000 mm Swing over bed: 720 mm Swing over cross slide: 470 mm Spindle bore: 104 mm Tailstock diameter: 100 mm (Morse 6 taper) Bed width: 550 mm Speeds: 2 speed ranges: 0–1600 rpm Rapid traverse: X-axis: 8 m/min Z-axis: 8 m/min Lsdpfx Aewuligeagerh Motor: Power: 22 kW Weight: 8,000 kg Equipment: CNC Fagor 8055 FL-BT 3-jaw SHUNK Rota-S Plus chuck Ø 315 mm Additional 3-jaw chuck Fixed steady rest Chip conveyor General condition: Lathe in excellent condition

Condition: excellent (used), functionality: fully functional, turning diameter over cross slide: 580 mm, spindle bore: 84 mm, turning diameter: 870 mm, Geminis lathe model GE 870 of 4000mm between points, turning on bed 870mm, turning on cross slide 580mm, turning on neckline 1100mm, length of neckline 340mm, speeds of 13-1000rpm, diameter of the hole of the shank 84mm, has mounted plate 3 claws diameter 315mm, has plate 4 independent claws of diameter 500mm, has fixed steady rests, lathe in general in good condition. Lodjwqz D Ejpfx Aagerh

Condition: excellent (used), Year of construction: 2015, CNC Lathe with c-axis GEMINIS - GHT4-G4 MACH-ID 9182 Make: GEMINIS Type: GHT4-G4 Control: FAGOR 8055 TC Year: 2015 Full C-Axis 360.000 Driven tools Axiaal & Radial  Driven tailstock  Steady rest C-Type Front chuck with 180 bore Rear chuck with 180 bore 3 guide way bed width 750 mm Max. turning Ø: 800mm X-Axis: 450mm Z-Axis: 4200mm Spindle bore: 162mm Speedrange: 900Rpm ATC / revolver: 8 Speed live tools:3000Rpm Power live tools:7.5kW Pinole taper: 5Mk Stroke pinole: 250mm Workpiece load: 2500 Ledpfowzh Eqsx Aagorh Length: 8200mm Width: 3200mm Height: 2900mm Weight: 24000kg

Condition: excellent (used), 3 pieces Chuck adapter with 20mm shank, equivalent to 3R-653 Lrodpfx Aaew E Hicegsh Mini holder chuck adapter 3R-653 for 20mm shanks Incl. drawbar Equivalent to: Manual chuck adapter, Macro-Mini, 3R-653 Incl. 3 pieces drawbar 3R-605.1E

Condition: good (used), fuel type: electric, JUST IN: 4 units Scooter / mobility scooter in good working condition; Year of manufacture: 2009; max speed 15 km/h. Watch the video on YouTube. Ledpsyay Umsfx Aagorh

Condition: like new (used), spindle diameter 35 mm 5 speeds from 3,000 to 10,000 rpm motor power 5.5 kW Maggi 4-roller feed with stepless speed control Lodeyfua Ujpfx Aagjrh tenoning carriage with angle setting scale worktable 120x730 cm 760 kg year of manufacture 2001 can be purchased without feed unit

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: G3169-0110, turning length: 530 mm, turning diameter: 420 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 65 mm, travel distance X-axis: 220 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 550 mm, overall weight: 4,700 kg, turning diameter over bed slide: 800 mm, HYUNDAI WIA L200SY CNC TURNING CENTER Year: 2012 | Fanuc 18i-TB CNC Control Lsdpfjx I A Hcsx Aagorh SN: G3169-0110 • 5-Axis CNC Turning Center – Hyundai WIA L200SY • Main Chuck: 8″ | Sub Spindle: 5″ • Live Tooling & Y-Axis + C-Axis indexing • Max Turning Diameter: approx. 419–420 mm / 16.5″ • Max Turning Length: approx. 520–530 mm / ~20.5–20.9″ • Swing Over Bed: approx. 800 mm / 31.5″ • X Travel: approx. 220 mm / 8.7″ • Z Travel: approx. 550 mm / 21.7″ • Y Travel: approx. 80 mm / 3.1″ • Max Spindle Speed: up to 4,000 rpm • Main Spindle Power: ~20 HP (~15 kW) • Sub Spindle Speed up to 6,000 rpm • C-Axis indexing: 0.001° possible • Tool Stations: approx. 12 • Coolant system and chip conveyor included • Approx. Dimensions: 120″ × 68″ × 80″ • Approx. Weight: ~10,500 lbs (~4,760 kg) NOTE: MACHINE WAS REMOVED FROM GOOD WORKING CONDITION 2 YEARS AGO. PLANNED TO PUT BACK IN SERVICE BUT SELLER WILL NO LONGER BE DOING MACHINING.

Condition: used, This listing is for the Stuart SSM1 Mini Orbital Shaker with holder The unit is in full working condition and is ready for immediate release Lredpfx Aaoxv A Nqogeh The Stuart SSM1 Mini Orbital Shaker is a compact and versatile laboratory shaker designed for gentle orbital mixing. It features a 16 mm orbital motion, variable speed control up to 300 rpm, and a built-in digital timer with settings ranging from 1 second to 999 minutes or continuous operation. The shaker is supplied with a non-slip mat suitable for holding up to four multi-well plates or diagnostic cards. It can operate in incubators and environmental chambers with temperatures up to 40°C and 80% relative humidity. ​

Condition: used, This listing is for a VWR Mini Star Silverline Centrifuge Lsdpfx Aajxzhiajgerh

Year of construction: 2024, condition: used, New: Yes Please contact us for more information. Ljdpfevx H Dujx Aagsrh

Condition: used, mileage: 18,378 km, power: 100 kW (135.96 HP), first registration: 12/2016, fuel type: gasoline, next inspection (TÜV): 11/2027, color: red, gearing type: automatic, emission class: euro6, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), * Original 18,378 km * Panoramic roof * "Cross Punch" leather upholstery * 6-speed automatic transmission * Air conditioning * Sport seats * Heated seats Lrsdpfx Asx Dplhsageh * Alloy wheels * Rain sensor * Light sensor * Radio: MINI Boost audio system * Colorline Carbon Black * 4x electric windows * On-board computer * Lumbar supports * Electrically adjustable and heated exterior mirrors * LDA (Lane Departure Assist) * Brake Assist * Rear bench, split-folding * ESP (Electronic Stability Program) * ASR (Traction Control) * Start / Stop system * Center armrest with storage compartment * Fog lights * Central locking with remote control * One owner * Full service history, documented exclusively by BMW/MINI * Last service at 15,735 km * Very clean and well-maintained vehicle Vehicle number: 129 WhatsApp number: You can find further vehicle offers at: ONLINE CONSULTATION / ONLINE INSPECTION / ONLINE PURCHASE CONTRACT / TRADE-IN OF YOUR USED CAR OR TRUCK / DELIVERY AVAILABLE AT EXTRA COST Delivery service available on request Foreign customers have the option to make a down payment and collect the vehicle at a later date. NET price for export possible (for vehicles with VAT reclaimable). ---- We are happy to handle your vehicle registration (Düsseldorf), as well as the issuance of customs/export or temporary registration plates (5 days). Full export processing possible (export declaration) Vehicles with TÜV used car appraisal available. Upon request, we are happy to offer you our GPG used car warranty with tailored solutions for you and your vehicle. Trade-in possible. For further enquiries, we are happy to assist you by phone. Business hours: Monday - Thursday 09:00 - 16:30, Friday 09:00 - 16:00 Subject to changes, errors, omissions, and prior sale. Offers are non-binding. All details provided without guarantee. Vehicle descriptions do not constitute assured characteristics.

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Ledpfsxdmgvsx Aagjrh Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: good (used), Year of construction: 2012, functionality: fully functional, Schiess CNC vertical lathe with C axis, year 1992, retrofitted in 2012 CNC: NUM 1060 FLEXIUM Lsdpfxjxpqm Rj Aagjrh 2 tables, table diameter 2000mm – max turning diameter 2500mm – max table speed 201 rpm – table power 56 KW Load capacity (table included): 16,000kg Movable crossrail with 12 positions, 50mm pitch Available space under spindle nose: min. 795mm, max. 1345mm RAM Z stroke: 1000mm C axis with 360,000 positions – milling spindle max speed 1600 rpm – milling spindle power 22KW – 2 gear ranges Tool magazine: 20 turning tool positions, 35 milling tool positions 1 milling head WIDAFLEX UTS80 1 milling head ISO 50 Renishaw MP60 touch probe (for parts) Tool presetter – Transmit function: G20 / G21 – No rigid tapping Chip conveyor Front door: partial opening M0 / full opening

Condition: excellent (used), Broadbent Heavy Duty Lathe 1041mm x 10,000mm Year approx. 1973. Swing over bed 1041mm (41”) Swing bin gap1575mm (62”) Distance between centres 9300mm (30’ 6”) Spindle bore 115m (4 ½”) Spindle speeds (18) 3.3 – 360 rpm Spindle motor 30 HP or 40 HP (To be confirmed) Tailstock 6 MT Lsdpfjwhylvsx Aagjrh Imperial & Metric screw-cutting with change gears. 36” Faceplate with 4 adjustable jaws, 54” Faceplate, Taper turning attachment, Power feed to top slide, 2 x 18” 3 point steadies, 24”/28” Steady.

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 26956, Specification Table size 914mm x 305mm X axis traverse 406mm Y axis traverse 305mm Z axis traverse 254mm Spindle BT 40 Spindle speeds 0-6000rpm Spindle motor 5.6kW Rapid feed rate 15.2m/min Toolchanger capacity 10 tools Approximate weight 1542kg Lsdowkrq Aepfx Aagorh   Machine equipped with:- Haas CNC Control System Coolant system Lighting Enclosed guarding Manual

Condition: ready for operation (used), Year of construction: 2003, operating hours: 11,600 h, functionality: fully functional, spindle bore: 107 mm, spindle speed (max.): 4,000 rpm, overall weight: 10,000 kg, controller model: Siemens 810D, Equipment: chip conveyor, TECHNICAL DETAILS Maximum swing diameter: 680 mm Swing diameter over X-guide: 565 mm Longitudinal travel: 1,300 mm Cross travel: 315 mm Spindle head: h5 Spindle diameter at front bearing: 150 mm Spindle bore: 107 mm Maximum torque: 600 Nm Spindle speed: 4,000 rpm Chuck diameter: 315 mm Rapid traverse X-axis: 60 m/min Lredpfxeymn Ibo Aagjh Rapid traverse Z-axis: 45 m/min Tool turret for: 12 tools Driven tools: 12 Tool holder: VDI 40 Quill stroke: 120 mm Quill taper: MK 5 MACHINE DETAILS Control system: Siemens 810D Dimensions & Weight Machine dimensions with chip conveyor (L x W x H): 5,700 x 2,600 x 2,210 mm Machine weight: approx. 10,000 kg Operating Hours Power-on hours: 47,781 h Spindle hours: 11,600 h EQUIPMENT Hydraulic steady rest, clamping range 30-245 mm Chip conveyor KNCS-N 315-91 power chuck

Year of construction: 2003, condition: not inspected (used), functionality: unexamined, travel distance X-axis: 150 mm, travel distance Z-axis: 250 mm, controller model: MAZATROL 640 T, overall weight: 4,000 kg, machine/vehicle number: 310163917, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item within the specified period: either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026. TECHNICAL DETAILS X-axis travel: 150 mm Z-axis travel: 250 mm MACHINE DETAILS Control: MAZATROL 640 T Operating voltage: 200 V Frequency: 50/60 Hz Rated current: 89 A Connected load: 17.8 kVA Dimensions & Weight Dimensions (L x W x H): 3,000 x 2,000 x 2,200 mm Lodpfx Aaoym Dhwogjrh Weight: 4,000 kg EQUIPMENT 12-position tool turret Tailstock External reference: Elos - Lot 16

Condition: not inspected (used), functionality: unexamined, turning length: 3,000 mm, spindle speed (max.): 1,800 rpm, overall weight: 8,000 kg, three-jaw chuck diameter: 310 mm, No reserve price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the machine within one of the specified periods: either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026. TECHNICAL DETAILS Turning length: 3,000 mm Center height over bed: 300 mm Swing diameter over bed: 600 mm Center height over carriage: 200 mm Swing diameter over carriage: 400 mm Spindle speed: 9 to 1,800 rpm Spindle bore: 110 mm Three-jaw chuck diameter: 310 mm Ljdsym Dcuepfx Aagerh Steady rest diameter: 200 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,000 x 1,400 x 2,000 mm Weight: 8,000 kg EQUIPMENT Tailstock Multifix turning tool holder Three-jaw chuck Two-axis digital readout (SONY) Steady rest External Reference: Pieper – Lot 57

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Weiler Centre Lathe Model Condor B, Leadscrew and Feed Shaft Lathe with 3-Axis Heidenhain Digital Readout from Training Workshop Technical Data: >> Year of manufacture: 1990, Machine no. 90-1419 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027, size 5, with bayonet lock >> Tailstock Morse taper: MK 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches: from 0.18 to 28 mm >> Spindle brake >> Weight approx. 1100 kg >> Switchable spindle brake >> Dimensions: Length 1.83 m, Height 1.29 m, Depth 0.88 m Accessories and Equipment: >> 3-axis Heidenhain digital readout >> 1 pcs 3-jaw scroll chuck with 1 set of jaws >> Toolpost with 7 tool holders >> Bed stop >> Machine mounts >> Drill chuck >> Live center >> Coolant system Lsdoym Dczopfx Aagerh About the machine: Offered here is a used Weiler Condor B lathe, year of manufacture 1990, in very good condition. The machine is of course fully functional. A very sturdy and powerful machine. The Weiler comes from a training workshop and is very well maintained. The 3-axis Heidenhain digital readout makes operation even easier and more precise. The machine has been electrically and mechanically inspected by us, and a full oil change has been performed. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test this machine under power at our premises.

Condition: ready for operation (used), Year of construction: 1996, operating hours: 46,282 h, functionality: fully functional, controller model: TX 8F, counter spindle speed (max.): 4,000 rpm, workpiece diameter (max.): 56 mm, Equipment: bar feeder, chip conveyor, No reserve price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the specified period, either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026. TECHNICAL DETAILS Max. counter-spindle speed: 4,000 rpm Max. workpiece diameter: 56 mm Rapid traverse: max. 15 m/min Fine interpolation cycle: 0.34 ms Maximum thread pitch: 999,999 mm Maximum radius: 99,999.999 mm Feed override: 0–200% Rapid traverse override: 0–100% Spindle speed override: 50–120% Workpiece removal via counter spindle Programming: EIA and ISO code Input/output resolution: X/Z: 0.001 mm, C-axis: 0.001° C-AXIS Main spindle: Max. speed: 80 rpm Torque at 100% duty cycle: 100 Nm Accuracy: +/- 3 arcmin Counter spindle: Max. speed: 80 rpm Torque at 100% duty cycle: 30 Nm Accuracy: +/- 3 arcmin Tool Turret 1 & 2 Driven tools per turret: 10 (14) Max. speed: 4,000 (8,000) rpm Power at 100% duty cycle: 1.5 kW Power at 15% duty cycle: 4 kW Torque at 15% duty cycle: 12.4 (4) Nm Number of tool holders per turret: 10 (14) Cylindrical shank as per DIN 69880: Ø 30 x 55 (25 x 48) mm Tool cross-section: 20 x 20 (16 x 16) mm Chip-to-chip time according to VDI 2852: 1.2 s Index time per station: 0.6 s Over 5 stations: 1.5 s Counter spindle (numerically controlled in Z-direction) Max. speed: 4,000 rpm Max. clamping diameter: 65 mm Continuously programmable AC motor: 11 kW Torque: 210 Nm Feed force at 100% duty cycle: 6,000 N Feed travel: 520 mm Ball screw: Ø 32 x 10 mm MACHINE DETAILS Control: TX 8F Operating voltage: 400 V Frequency: 50 Hz Lsdoym A E Iopfx Aagerh Control voltage: 230 V Rated current: 85 A Connection: 54 kW Connected load: 39 kW Noise emission at operator station: 71 dB(A) Hydraulics System pressure: 60 bar Tank capacity: 150 l Coolant Per tool turret: single-stage centrifugal pump Pump pressure: 5/12 bar Tank capacity without chip conveyor: 300 l Tank capacity with chip conveyor: 280 l Dimensions & Weight Dimensions (L x W x H): 11,000 x 2,000 x 2,600 mm Weight: 6,000 kg Read operating hours: 46,282 h EQUIPMENT STAMAG bar feeder Chip conveyor Hainbuch chucking system Two 10-station turrets with driven tool stations Counter spindle External reference: L. Schaible

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 5012221, spindle bore: 58 mm, spindle speed (max.): 2,000 rpm, overall weight: 1,700 kg, center width: 760 mm, bed width: 300 mm, No reserve price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the specified period, either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026. TECHNICAL DETAILS Swing diameter over bed: 430 mm Swing diameter over cross slide: 240 mm Swing diameter over gap: 690 mm Distance between centers: 760 mm Bed width: 300 mm Spindle bore: 58 mm Spindle speed: 20 - 2,000 rpm Longitudinal feeds: 0.05 - 0.82 mm/rev Cross feeds: 0.02 - 0.4 mm/rev Metric threads: 0.5 - 7 mm Lead screw diameter: 35 mm Lead screw pitch: 6 mm Tailstock quill diameter: 58 mm Tailstock quill travel: 150 mm Quill taper: MT4 MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 1,890 x 900 x 1,800 mm Weight: 1,700 kg Lrodpoym A Amjfx Aagsh External reference: Limani/Maric

Condition: used, Brand: GEMINIS Lrodpjwznp Nsfx Aagjh Model: CNC 4 PLUS 620 x 2000 Cnc : FAGOR Distance between points : 2000 mm Height of centers : 315 mm Max. turning diameter : 620 mm Swing over saddle diameter : 370 mm Bar passage : 80 mm Precision swivelling turret: 1st speed range: 0 to 355 rpm 2nd speed range :0 to 1800rpm Tailstock : Morse 6 Main motor : 15 kw Max. Piece weight : 2.560 kg Tailstock quill diameter : 140 mm Machine size (L x Wx H): 4300x 1900 x 1800 mm

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, machine/vehicle number: BE55324S, turning length: 300 mm, travel distance X-axis: 100 mm, travel distance Z-axis: 250 mm, overall weight: 5,000 kg, controller model: FANUC SERIES 18i-TB, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to timely collection, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Turning length: approx. 300 mm Travel distance X-axis: approx. 100 mm Travel distance Z-axis: approx. 250 mm MACHINE DETAILS Control: FANUC SERIES 18i-TB Connected load: 36 kW Operating voltage: 200/220 V Frequency: 50/60 Hz Dimensions & Weight Dimensions (L x W x H): 8,000 x 2,000 x 2,200 mm Weight: 5,000 kg EQUIPMENT Main spindle with HAINBUCH chuck Lrjdoym Ax Iopfx Aagsh Counter spindle with HAINBUCH chuck Double turret, each featuring 12 tool stations Bar feeder by BREUNING SIMAG, type: 42.1 R-3000 External reference: Pieper – Lot 111

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 1310370, turning length: 240 mm, turning diameter: 180 mm, spindle speed (max.): 6,000 rpm, bar diameter (max.): 35 mm, controller model: FANUC SERIES oi-TD, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the machine within the designated periods: either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026. TECHNICAL DETAILS Max. turning diameter: 180 mm Max. turning length: 240 mm Chuck size: 6 inch Max. swing over bed: 320 mm Max. bar capacity: 26/35 mm Spindle bearing diameter: 75 mm Max. spindle speed: 6,000 rpm X-axis travel: 120 mm Z-axis travel: 280 mm Rapid traverse X-axis: 12 m/min Rapid traverse Z-axis: 18 m/min MACHINE DETAILS CNC control: FANUC SERIES oi-TD Operating voltage: 200 V Frequency: 50/60 Hz Connection: 23 kVA Dimensions & weight Lrsdpfxsym Ab Ne Aagjh Dimensions (L x W x H): 1,500 x 1,500 x 2,200 mm Weight: 2,000 kg EQUIPMENT 12-position turret External reference: Elos - Lot 7