Used washers for sale (97)

Condition: used, Year of construction: 2013, No minimum price – guaranteed sale to the highest bidder! The machines are still assembled but disconnected from the power supply. An 11-ton forklift is available on site for loading. Gjdpfxezy Uk Us Ak Ujug For sale is a parts washing system with continuous operation, manufactured by Eko-Pil, model: PMPO 100T.

Condition: used, functionality: fully functional, total length: 1,200 mm, total width: 750 mm, total height: 30,250 mm, overall weight: 670 kg, input voltage: 400 V, pressure: 140 bar, electrical fuse: 16 A, temperature: 60 °C, operating pressure: 130 bar, empty load weight: 560 kg, Good day. For sale is an Ehrle Smartwash station. Guodpfxjzzdxds Ak Ueg It is in used condition. It is functional. We would be happy to provide you with further information.

Condition: used, Year of construction: 2014, functionality: limited functionality, machine/vehicle number: 10257-1, Technical characteristics: # Payload Capacity: Basket size 670 x 480 x 300 # Tank capacity: 3 tanks x 2300 L # Washing chamber capacity: 1100 L # Ultrasonic equipment: 4000W, 25kHz # Average load weight approx. 100 kg; maximum 150 kg # Machine weight: 6000 kg Electrical Equipment # Operating voltage: 400Vx3 # Connected load: 80 kVA / rated current 152A Dimensions # Machine dimensions (L×W×H): 2000 × 2850 (With Sonowatt 4500) × 2500 mm Equipment consists of: # Main machine LPW / Automation conveyor + Ultrasonic SONOWAT unit Machine status: Main machine WORKING – vacuum pump needs replacement (in stock), safety switch on operator panel needs replacement Ultrasonic Sonowat NOT WORKING – ball screw of 2nd rinsing bath worn out Guedpfx Akexwm Dbj Ueg

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, controller manufacturer: Mitsubishi, Equipment: documentation/manual, - 4 ultrasonic tanks with floor sound and heating - 2 rinsing tanks with heating - Surface separator - Tank/circulation filtration per tank - Additional tank with external heating - DI water connection with carbon cartridge - 1 vacuum dryer (with reserve pump) - Transport system for automatic transfer of the product carriers - 12 product carriers for holding individual transport baskets Gujdpfxjvu Acfe Ak Ueg - Mitsubishi PLC control

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 07/018, overall weight: 2,900 kg, inner diameter: 2,500 mm, temperature: 65 °C, heating capacity: 4 kW (5.44 HP), load capacity: 1,500 kg, Equipment: documentation/manual, Cleaning System Type W 250 Used, low operating hours Available immediately. Useful dimensions: • Basket diameter: 2,500 mm • Usable internal height: 1,200 mm • Basket load capacity: 1,500 kg With the following features: • Washing • Rinsing • Hot air drying 2 x 10 kW • Plate phase separator for oil removal • Automatic filling device • Chip filter with lye cover plate Guedpfx Akjxgcx Te Uog • Indirect bath heating stainless steel/ceramic • Vapor extraction • Rinse water extraction • Automatic pumping system with floor flushing • PLC with operator panel • Pull-out washing basket with transport trolley Current new price: approx. €160,000.00 Offer price: €70,000.00 Unpacked, ex works Bad Salzuflen. Payment: Due immediately, net.

Condition: used, Year of construction: 2011, operating hours: 21,763 h, functionality: fully functional, total length: 7,200 mm, total width: 2,950 mm, total height: 3,000 mm, overall weight: 12,400 kg, input voltage: 400 V, input frequency: 50 Hz, electrical fuse: 175 A, power: 105 kW (142.76 HP), A Pero V4 parts cleaning system is available. Basket dimensions X/Y/Z: 1250mm/850mm/500mm Control system: Siemens S7 Basket feeding: automatic, Operating hours: 21763h, batch counter: 54211. Ultrasound included. Documentation available. On-site inspection is possible. Available from November 2024. Spare parts package included Gusdeu Ecflopfx Ak Ujg

Condition: used, Year of construction: 2004, functionality: fully functional, DÜRR Aqueous Cleaning System with large baskets – available in single or double basket configurations. System is available ex location; a large quantity of spare parts is included in the delivery. Price on request Our Plant and Machinery Service: Gjdpsx Emy Uofx Ak Ujug High availability – maximum productivity! Downtime costs time and money – that's why we ensure your machines and systems run reliably and efficiently. Our experienced team of qualified service technicians supports you with expertise, commitment, and complete service from a single source. Our Service Promise: We keep your systems in optimal condition – from mechanics and electronics to refrigeration technology. Whether maintenance, repair, or optimization: We ensure smooth operations. Overview of our services: 🔧 Electrical / Electronic Service • Professional troubleshooting and repairs • Modifications, upgrades, and modernization of controls (all common manufacturers) • Optimization of existing systems • Spare parts service for fast recommissioning ⚙️ Mechanical Service • Fast crash repairs and expert restoration • Regular maintenance and servicing of your equipment • Modifications, adjustments, and expansions • Installation and commissioning of new machines • Refrigeration plant inspections according to §6 Section 1 of the Chemicals Climate Protection Ordinance We carry out almost all mechanical and electronic work precisely, reliably, and on schedule. _____ Why we are the right partner for you: ✅ Everything from one source – mechanics, electrics, refrigeration ✅ Experienced technicians with extensive expertise ✅ Fast response times and flexible solutions ✅ High system availability through preventive maintenance

Condition: used, Year of construction: 2015, Dimensions (L/W/H) ca. 4020 x 2460 x 2600 mm total power requirement 78 kW filling amount 1200 l carrying capacity max. 0,5 bath temperature 65 °C heating capacity 54 kW In our opinion, the machine is in good used condition Gusdpjzq Hlxefx Ak Ueg and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: refurbished (used), Year of construction: 1992, operating hours: 3,998 h, functionality: fully functional, machine/vehicle number: 100175, We are selling a used Franke drum washing system for washing bulk goods, primarily for turned and milled parts. Facilities of the facility: Tanks made entirely of stainless steel 600 liter washing tank with 18 KW heating 600 liter flushing tank with 18 KW heating Insulation of both tanks Gedpoqwnypofx Ak Ujug Weekly timer for the heating Washing drum can be switched via rotary button, 360° rotation or standstill when washing and rinsing including speed sensor Exhaust fan with 900 m3/hr. Oil separator over large disc skimmer with pan and ball valve automatic water dosing / Geka coupling at the rear 2 washing baskets 530 x 300 x 200 mm with tension lid, mesh size 6x6 mm 50 kg load per washing basket Pneumatic door opening and switching from washing to rinsing To be attached to the front frame as a basket support with 4 M12 screws Drain taps for washing and rinsing tanks as well as two large maintenance hatches Good accessibility on all sides, 2 x folding doors at the front and the remaining side walls can be removed using quick-release fasteners Rexroth pneumatics Grundfos stator pump in the washing and rinsing tank 63 A Mennekes plug with 5 meter cable Rital control cabinet with accessories inside operation manual Machine ready for immediate use Delivery and commissioning possible after consultation and cost assumption If you have any further questions, please write or call

Condition: used, Year of construction: 2010, operating hours: 15,000 h, machine/vehicle number: M312, Technical Specifications and Performance Data This pre-owned monoblock is manufactured by Omar and integrates drying, capsule application, and self-adhesive labeling functions into a compact rotary system designed for professional beverage production. The machine is equipped with a double capsule applicator with rotating heads for precise capsule application and three self-adhesive labeling units for front, back, and neck labels. It is ideal for presenting high-quality wines and can be integrated into a used bottling line or as a stand-alone module in an industrial packaging environment. Manufacturer: Omar Model: Simphony Washer-Dryer Year: 2010 Configuration: Drying module + double capsuling unit with rolling heads + 3 self-adhesive labeling stations (front/back/neck) Bottle Formats: Compatible with Bordeaux and Burgundy bottles Label Application: Pressure-sensitive (self-adhesive) for front, back, and neck Container Type: Glass bottles Format Examples: Reference capacity 0.5 L Application: Suitable for integration into beverage production lines and industrial filling Advanced Automation and Control Systems The monoblock is designed for synchronized operation of the drying, capsuling, and labeling units. The self-adhesive labeling stations ensure precise application with fine adjustment for front, back, and neck labels. The double capsuling stations with rolling heads ensure consistent finishing quality on wine capsuling units. Rapid mechanical adjustments support the changeover from Bordeaux to Burgundy bottles, improving production flexibility in existing bottling lines. Production Line Integration Capability Designed for in-line operation, the unit interfaces upstream with fillers and capping/closing machines and downstream with inspection and packaging equipment. It adapts to standard conveyor logistics, enabling smooth transfer of glass bottles. Format changes between compatible wine bottle geometries are supported, making the machine suitable for multi-SKU beverage production. Machine Condition and Maintenance History The machine has undergone a thorough restoration, which included purchase, transport, and recommissioning, resulting in a fully functional and reliable second-hand asset. It is ready for use in a production setting, suitable for rapid integration into an existing bottling line. Operational Performance and Versatility Optimized for glass wine bottles, the monoblock combines drying, precise capsule application with rolling heads, and three-point self-adhesive labeling. This configuration supports premium packaging standards and is suitable for wineries and beverage producers seeking consistent presentation quality in an industrial packaging environment. Installation Requirements and Site Preparation The rotary machine’s compact footprint allows for easy placement within typical bottling rooms. Connection to existing conveyor belts and utilities is recommended for optimal integration. The site layout must allow for safe operator access around the guards and clear spaces for format changeovers and routine maintenance. Certification of Conformity and Safety Standards Gujdpfx Aoygh I Uok Ueg The monoblock includes protective guards around the moving units, with standard operator guards and emergency stop functions typical of modern bottling...

Condition: used, (1) Industrial multi-stage parts washing/cleaning line, (1) roller conveyor infeed (Ullmann Fördertechnik GmbH), several wire mesh transport baskets, (1) technical manual, (1) centrifuge/oil separator unit (Type SMR100-BO-2) Technical details: Gujdpfozwf Tbox Ak Uog Data Industrial multi-stage parts washing/cleaning line: overall dimensions approximately 9020 x 2610 x 3390 mm, max. load weight approximately 100 kg, total heating and motor power approximately 67.4 kW, supply 400V 50Hz Data Centrifuge/oil separator (Type SMR100-BO-2): machine no. 993 019 010, year 2001, main motor 5.5 kW

Condition: used, Year of construction: 2016, functionality: limited functionality, machine/vehicle number: 10284-1, Technical characteristics: # Payload Capacity: Basket size 670x480x300 mm # Tank capacity: 2 tanks (600L + 300L) # Washing chamber capacity: 830 L # Ultrasonic equipment: 3000 W, 25 kHz # Average load weight approx. 50 kg; maximum 100 kg # Mechanical weight: 3000 kg Electrical Equipment # Operating voltage: 400V, 3-phase # Connection power: 53 kW / rated current 98A Dimensions # Machine Dimensions (L×W×H): 2000 × 2500 × 2500 mm Equipment consists of: # Main LPW machine, manual loading/unloading (loading height approx. 930 mm) # Heated air blow dryer: 11.8 kW air heater blow dryer # Performance: 6-8 batches/hour (basket or palletized goods) # Throughput: ≈ 65 pieces/hour Gujdpfx Aexw Tg Njk Usg # 3 baskets × 12 pieces/basket = 36 pieces per batch / Batch rate: 65 ÷ 36 ≈ 1.8 batches/hour # THREE-PHASE SEPARATOR APPROX. 100 L/H for oil separation # Cycle time: 2 batches/hour → 30 minutes per batch Machine status: Main machine WORKING – vacuum pump requires replacement or repair.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: contino spezial 260, total length: 10,200 mm, total width: 2,532 mm, total height: 2,487 mm, water consumption per time unit: 4 l/min, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, pressure: 6 bar, temperature: 80 °C, heating capacity: 50 kW (67.98 HP), power: 75 kW (101.97 HP), waste water connection: 50 mm, water pressure: 2 bar, water connection: 25 mm, Equipment: documentation/manual, Machine description - the lids of the crates can be folded down to the side, total transport height approx. 1000 - 1050mm - the two track belts each have 2 guides on the side, one guide each from above and a cam spacing of 700mm - Feed zone with 1500mm straight length with drive, working height approx. 1000mm - Main washing zone with 2700mm length, tank 600l with heating 50kW, (20kW possible via hot water) washing temperature 55-60°C, 1 stainless steel centrifugal pump 7.5kW 1500l/min at 2bar, stable external box filter, brush cleaning takes place after the first spray cleaning with an external brush, then repeated spray cleaning, - 1800mm rinsing zone with approx. 150 - 250l/h via direct fresh water supply, the fresh water is supplied hot at at least 60°C; 500mm feed zone with top suction connection (stainless steel radial fan, DN 250 connection); 1800mm long blow-off with 2 5kW fan motors; 500mm long discharge table Washing, rinsing and drying system length 8800mm Hourly output (adjustable with LENZE frequency inverter) approx. 250-300 crates with hinged lids (cross flow) or 500 lids in longitudinal flow incl. label removal with lateral brushes (LENZE drive 0.37kW) Brush cleaning takes place after the first spray cleaning with an external brush, followed by a second spray cleaning, Additional hot water heat exchanger in the machine, Drum filter for automatic label discharge, with this equipment the dirty water in the main flow is fed through a drum filter, the label dissolution and mash formation is significantly reduced, the washing tank capacity can be used for several shifts without changing Gravity roller conveyor for Euro pallets, internal width 840mm, very stable design made of 4mm thick stainless steel sheet, the rollers are made of galvanized steel 5000mm The machine has the following connections: Gedpfx Asrr Smljk Ueug - Fresh water at approx. 60-80°C 3/4", flow pressure min. 2 max. 6bar via hose connection 3/4" - Electricity: max. approx. 50kW, 400V 50 Hz - Waste water DN 50 discharge into floor drain - Hot water 1 1/4" flow and return, flow temperature min. 80°C, flow rate approx. 3-4m3/h Key advantages of our machines: - completely double-walled, sound and heat-insulated machine housing, manufactured in one piece and completely welded, low energy consumption - reliable operation, very long service life - long washing treatment and nozzle and washing system refined over the years = excellent washing results - Nozzle arms can be removed and cleaned without tools, stainless steel nozzles with large passage and optimized droplet size = good cleaning effect + insensitive to soiling - Washing tunnel designed for crate size 300x400x600mm - Use of first-class attachments, e.g. LENZE drive and frequency converter, EDUR stainless steel centrifugal pump, stainless steel ELEKTROR Esslingen blow-off motor with motor separation and SIEMENS switch cabinet components

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: 10258-1, Technical characteristics: - Payload Capacity: Basket size 180x170 mm, Height approx. 150 mm - Tanks capacity: 1 tank 775 L - Washing chamber capacity: 790L - Conveyor velocity: approx. 0.4 m/min - Average load weight approx. 50 kg; maximum 100 kg - Mechanical weight: 4500 kg Electrical Equipment - Operating voltage: 400Vx3 - Connection power: 35 kW / rated current 65A Dimensions - Machine Dimensions (L×W×H): 4000 × 2000 × 2000 mm Equipment consists of: - Main machine LPW, manual loading/unloading (Loading height approx. 930 mm) - Three-phase separator approx. 100 L/h for oil separation Gjdpfsxxkk Iex Ak Uoug - Performance: Spray pressure max. 5.0 bar Machine status: WORKING

Condition: good (used), Year of construction: 2007, Connected load: 75 kW Control system: Siemens Simatic Panel Touch Cleaning agent: aqueous cleaners Filling volume: 1,070 l Loading/unloading via roller conveyor system, approx. 400 mm, roller width 600 mm Feed belt, discharge belt with cooling section, unloading station with transfer unit Removal / inspection station for oil separator Transport and loading can be organised across Europe for an additional charge upon request. Prices plus VAT Guodpfozvfkdjx Ak Usg Inspection possible by appointment. Please contact us – our team will be happy to assist you. Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, AND MORE. Do you need a high-quality but affordable machine for your production? Or are you looking to sell your machine? For further information or to get in touch, please reach us via the contact form.

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, Electrolux professional dryers, 2 models, UNUSED. Guedpfx Aezg D Uiek Ueg - 2x Electrolux TD6-16, dimensions = 720x1210x1700 mm, 400V, 60 Hz, 14.3 Kw, PRICE = €3750 The Electrolux TD6-17S is an industrial stack dryer with two drums and a total capacity of 2 x 17 kg. This double dryer is designed for maximum efficiency, fast drying times, and low energy consumption, making it ideal for professional laundries and self-service laundromats.

Condition: used, Year of construction: 2009, machine/vehicle number: SCIAC45, Used Rinsing Machine Kompass SK481 8000 bph Used Rinsing Machine Kompass SK481 8000 bphGeneral Features of the Used Rinsing Machine Kompass SK481 8000 bph The Used Rinsing Machine Kompass SK481 8000 bph rinses bottles with a diameter of 45 mm and delivers a nominal output of 8000 bottles per hour. Kompass manufactured this machine in 2009 to serve medium-speed bottling lines. In particular, the SK 481 model offers a compact, efficient solution for plants that prioritize line compatibility and consistent performance. As a result, it suits both new installations and retrofitting projects.This unit is configured to work specifically with 0.1275-liter PET bottles, making it ideal for producers handling small-format plastic containers. Operation and Mechanical Configuration of this used rinsing machine This rinsing unit rotates counterclockwise, while bottles enter from right to left. Therefore, the machine aligns easily with conventional conveyor systems. Moreover, the mechanical assembly includes 32 grippers that firmly secure each bottle during the rinsing phase. The Used Rinsing Machine Kompass SK481 8000 bph performs a single rinsing treatment using fixed nozzles and water as the washing medium. Consequently, it ensures minimal complexity in maintenance and operation. Processable Products and Application Versatility Gsdeyhbwrspfx Ak Ujug The Used Rinsing Machine Kompass SK481 8000 bph handles various products, including alcoholic beverages, juices, syrups, oils, soft drinks, spirits, wine, and water. Thanks to this broad compatibility, the machine supports production lines that frequently change product types. In addition, operators can use it across multiple beverage categories without major mechanical adjustments. Furthermore, the consistent treatment method ensures uniform results regardless of the processed liquid.Its adaptation to 0.1275 L PET bottles ensures compatibility with compact beverage formats, commonly used in specific product lines or promotional packaging. Electrical and Dimensional Specifications of this used rinsing machine The machine operates at 415 Volts, with a frequency of 50 Hz, and consumes 3.0 kW of electrical power. These parameters match industry-standard infrastructure. Additionally, the machine’s footprint — 1850 mm long, 2250 mm wide, and 2100 mm high — fits comfortably within most medium-sized bottling halls. Therefore, engineers can plan the layout with minimal disruption. Likewise, these dimensions support integration with adjacent modules in the line. Automation and Control System

Condition: used, Year of construction: 2004, Technical details: Basket size LxWxH: 530 x 320 x 200 mm Max. basket weight: 50 kg capacity: 4 Körbe/h; baskets/h Godpezu St Nofx Ak Ueug No. of washing chambers: 1 No. Of tanks for washing: 1 No. Of tnks for conserving: 1 Cleaning medium: Tetrachlorethen Electrical heating power: 42 kW Machine size LxWxH: 4 x 3 x 2 m

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, Working, new pumps. Gujdpfx Aksy Ev Hqe Ujg

Condition: like new (used), Year of construction: 2020, Chamber cleaning system Technical data: Tank capacity 800 liters Heating capacity 54 kW Basket load capacity max. 250 kg Basket size W 651 x D 471 x H 300 mm Bath temperature 65 degrees Celsius max. Machine color stainless steel 1.4301, polished Compact and easy-to-maintain 2-tank cleaning system (cleaning/rinsing) Combination of spray and immersion cleaning Integrated media treatment for long bath life Freely programmable 360° rotation of the cleaning basket Integrated collection tray in the frame Individual speed and nozzle control Use of standard cleaning baskets Godpfx Aezhmp Sjk Ueug High-quality stainless steel design Ultrasonic Vacuum Weight 3200 kg

Condition: good (used), Year of construction: 1997, Rust size: 700 x 650 x 1.100 mm (W x H x L) batch weight: 350 kg heating: electrical, 70 kW temperature: max. 80°C Gujdpozvfkwsfx Ak Ujg

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: A-200711, total length: 2,450 mm, total width: 780 mm, total height: 1,150 mm, input voltage: 220 V, A washing system for anilox rollers and sleeves is for sale. Further information can be found in the photos. Guedpsww Tziofx Ak Ujg

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: FK 524365, FOR SALE: MINIMALLY USED Ecoclean EcoCcore DRY CLEANING MACHINE, max. basket size 650x470x400 mm (bearing surface 630x450 mm) / batch weight 70-200 kg including basket, 50 washing programs, heat recovery, 10 batches/hour. Godpfxszl A Rgo Ak Ujug Ecoclean EcoCcore solvent-based cleaning machine, max. basket size 670x480x400 mm, max. load weight 200 kg, approx. 8-10 loads/hour, WLAN connection, loading ramp, 4453 operating hours, serviced at 4450 hours.

Condition: like new (used), Year of construction: 2024, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 9850, total length: 7,500 mm, overall weight: 900 kg, input voltage: 400 V, Equipment: documentation/manual, Sale of an LCT T 600 demonstration pass-through washing system from 2024 at a special price Zones of the pass-through washing system: Zone 1: Main washing zone: Length: approx. 2600 mm Pump: 7.5 kW, 60 cbm/h Tank capacity: approx. 400 l Water heated with 3 electric screw-in heaters each 10 kW Operating washing temperature: approx. 60° C Zone 2: Rinse zone Length: approx. 2200 mm Pump: 3 kW, 33 cbm/h at 3 bar Tank capacity: approx. 350 l Water heated with 2 electric screw-in heaters each 10 kW Operating washing temperature: approx. 60° C Zone 3: Hot air drying zone: This serves for all-around mechanical air blowing (from below, the sides, and above) of the water droplets located on the surface of the washed goods, which are blown off by air knives and built-in high-pressure fans. Guodswpq Evjpfx Ak Usg The conveyor belt is equipped with a plastic belt. The frame is made of stainless steel 1.4301, has its own drive, and is controlled via the system’s PLC control. The conveyor belt brings the washed goods out of the machine, makes a 90° curve to the left, and then conveys the goods towards the machine entrance (where the items to be washed are placed on the machine). There are 3 photoelectric sensors at different points on the conveyor belt, equipped with special holders and mutually facing reflectors on the stainless steel structure. Belt width 400 mm / height up to 400 mm (At the beginning – 1 sensor before the curve, 1 sensor at the end, and 1 sensor approx. 2 m before the end) is a buffer zone (1-2 m long). As soon as the buffer zone is filled with returning washed goods, the machine and the conveyor belt stop automatically.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: A00.5392, total length: 10,600 mm, total width: 2,680 mm, total height: 3,190 mm, input voltage: 230 V, power: 45 kW (61.18 HP), Markert continuous washing system for washing and drying parts (e.g., metal cleaning) - Fully functional - Year of manufacture: 2000 Gsdpsxb Dcvofx Ak Usug - Designed for washing parts in baskets - Suitable for use with alkaline or neutral cleaning agents - Drying via circulating air at 20°C - Exhaust air managed by steam condenser, 4500 m³/h Scope of delivery includes: 3 folders with technical documentation, operating manuals, drawings, etc. (all original from Markert) Please submit a purchase price offer for the machine.