Used ultrasonic cleaning plants for sale (61)

Condition: new, MultiClean Multistage Ultrasonic Cleaning System MultiClean cleaning systems are available with 2, 3, 4 or 5 tanks from our standard range as well as larger quantities for special machines at request. Tanks can included multiple configurations including pre-washing, ultrasonic cleaning, rinsing, passivation and drying. Pre-Washing Pre-washing is generally used for very dirty and greasy parts before precise cleaning to remove rough contamination to save time, energy, water and cleaning chemical consumption. Ultrasonic Cleaning Ultrasonic cleaning power is able to reach points that are normally very difficult to reach like small holes and complicated shaped parts which can’t be cleaned with a brush or by hand giving better precision cleaning results. Rinsing Cleaning chemical residue can remain on the surface of the parts after cleaning. To wash away these chemical residuals rinsing can be used either by a closed circulation system or by continual fresh water supply. Passivation Sometimes cleaned parts needed to be protected against oxidation and by adding an additional stage with a passivation chemical inside the tank you can passivate and protect the parts Drying After the cleaning process is complete parts can be dried by either hot air or vacuum drying as the final stage according to the geometry of the parts and to customer’s requirements. Hfodpod Hdvmofx Ahved Optional Extras A large range of optional extras are available including oil skimmers, pump circulation, filtration, basket handling systems, pneumatic lids and many more available at request.

Condition: as good as new (ex-display), Year of construction: 2026, Ultrasonic Cleaning System ULTRA300 Usable platform dimensions: 1,050 x 550 mm Maximum usable height: 450 mm Maximum load weight: 300 kg Volume: 585 liters + 70 liters (oil separator) = 655 liters Heating: 2 x 6 kW Hfsdpfjxuzyfox Ahvod Completely constructed from stainless steel Thermally and acoustically insulated External dimensions approx.: L 1,700 x W 1,050 x H 2,000 mm Control system manufacturer: Fatek, HMI manufacturer: Weintek Electrical power requirement: 15 kW Includes: - Automatic pneumatic goods lift - Surface spray/rinse and oil separator for bath maintenance - Ultrasonic submersible transducers with dual-side sonication - Output: 3,000 W effective / 6,000 W peak - Multifrequency: 20 kHz / 40 kHz - Manual blow-off pistol Demonstration unit from the Glogar Technology Center, available immediately

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 1 h, Ultrasonic cleaning device Glogar Ultrasonic 600H Tank capacity max.: 58 litres Basket dimensions (usable): 400 x 255 x 220h mm Hfjdpfofk Tt Isx Ahvsd Internal tank dimensions: 500 x 330 x 350h mm Outer dimensions of the unit: 670 x 580 x 936h mm Ultrasonic frequency: 25 / 45 kHz (switchable) Ultrasonic power eff./max.: 900 / 3.600 Watt Heating power: 2.800 Watt Sweep: yes Pulse: yes Degas / Autodegas: yes Drain/diameter: 3/4 basket load: 25 kg Included in delivery is 1 stainless steel basket and 1 noise protection lid. Delivery ex works (FCA), AT-4490 St. Florian b. Linz Device is produced in Germany! OTHER DEVICE DIMENSIONS AND DESIGNS ON REQUEST.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, For sale: industrial 4-chamber ultrasonic washer Skymen JTM-4060GDH, purchased new in 10.2024 directly from the manufacturer. The machine was purchased as a temporary solution before the delivery of a vacuum cleaning system and was used only briefly during commissioning tests. Condition: as new / excellent. The washer is designed for precision cleaning of machined metal parts, removal of machining oils, chips and fine particles after turning, milling or grinding operations. The system consists of four independent chambers, enabling a complete cleaning process including washing, rinsing and drying. Machine configuration: Ultrasonic washing chamber • ultrasonic power: 1500 W (30 transducers) • frequency: 40 kHz • heating power: 3 kW • operating temperature up to 95 °C • circulation filtration system • dynamic lifting system (“throwing up & down”) for improved cleaning efficiency Ultrasonic rinsing chamber • identical ultrasonic configuration as washing chamber • independent filtration system Rinsing chamber • tank capacity approx. 99 L • heating power: 3 kW Hfjdeyt Elqjpfx Ahvjd Hot air drying chamber • high-efficiency air blower • heating power: 3 kW • temperature control Additional features • separate liquid supply and drainage for each chamber (no cross-contamination) • compatible with industrial cleaning chemicals • stainless steel baskets included • drain valves and water level sensors • electronic control system Construction • stainless steel AISI 304 • wall thickness: 2 mm Technical data • manufacturer: Skymen • model: JTM-4060GDH • year of manufacture: 2025 • dimensions: 2880 × 1350 × 1180 mm • weight: approx. 480 kg The machine is supplied with full technical documentation and certificates (CE / ROHS / FCC / ISO 9001). Ideal for CNC machining companies, precision metal parts production, automotive and medical component manufacturing. Machine location: Poland Inspection possible by appointment.

Condition: as good as new (ex-display), Year of construction: 2022, 1.0 ft. Ultrasonic Cleaning Device Manufacturer: AIR FRESH SERVICE INDUSTRIEFILTER Type: 1-Chamber Cleaning System Inner Tank: 750 x 600 x 770 mm Year of Manufacture: 2022 THIS DEVICE HAS NEVER BEEN USED. Hfjdpfx Ajv Nztxehvod

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 510 mm, total length: 500 mm, total height: 420 mm, maximum load weight: 125 kg, tank capacity: 110 l, overall weight: 150 kg, Ultrasonic cleaning device with a 100-liter capacity, operating at frequencies of 28 kHz and 40 kHz. The tanks are equipped with an electric heating system ranging from 200W to 500W, depending on the model, in addition to an ultrasonic power output of 1000W. This ultrasonic cleaning machine features a 3/8" drain outlet. Ultrasonic cleaning system with patented technology Hfjdpfx Ahsypcunjvjd The SL series ultrasonic cleaning systems, designed for static loading, are specifically engineered for advanced processes such as disinfection, pickling, cleaning, and degreasing, as well as for removing scale from a wide range of industrial parts and materials. Each tank includes at its base a removable static platform, precision-engineered to withstand the maximum static load specified in the technical data sheet. Starting from the 1000-liter model, all units are equipped with an automated lid opening and closing mechanism, optimizing operational safety and efficiency. DCM Ultrasonic – specialists in ultrasonic cleaning.

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 840 mm, total length: 1,040 mm, total height: 900 mm, maximum load weight: 200 kg, heating capacity: 6 kW (8.16 HP), tank capacity: 275 l, warranty duration: 1 months, type of input current: three-phase, inner dimension height: 420 mm, inner dimension length: 700 mm, inner dimension width: 500 mm, compressed air connection: 7 bar, input voltage: 400 V, input frequency: 50 Hz, WJS MTS Tool Washing Machine - Features an automatic system for cleaning tools of resin and other residues. - The carrier plate holding multiple tools is moved up and down in the cleaning bath, ensuring that all surfaces, channels, and recesses are cleaned quickly and thoroughly. - Additionally, two ultrasonic modules are utilized to significantly reduce cleaning time. Hsdoym N Uispfx Ahvefd - The system operates quietly and is both user- and environmentally-friendly, as only water-soluble cleaning agents are used and the cleaning process takes place within a closed unit. - The system is fully automatic and requires no supervision, saving time and money while ensuring tools are cleaned perfectly and gently. The WJS MTS-U system can also clean machine parts and other materials. - Suitable for all alkaline and acidic agents, as well as solvent-based cleaners. Ex works price Delivery time: 10-12 weeks One machine available from stock, subject to prior sale.

Condition: new, Year of construction: 2026, total width: 680 mm, total length: 780 mm, total height: 670 mm, maximum load weight: 15 kg, tank capacity: 105 l, warranty duration: 12 months, inner dimension height: 400 mm, inner dimension length: 600 mm, inner dimension width: 500 mm, Tank dimension: (lxwxh) 900 x 600 x 500mm Total dimension: (lxwxh) 1.080 x 780 x 750mm Wash tray outside dimension: (lxw) 840 x 540mm Loading cap. 60kg Filling volume cap. 240 Liters Ultrasonic Power: 12KW two ultrasonic activators, sidewards mounted heating power: 6KW, 30-70°C Electrical power 400V/50Hz Drainage valve, overflow valve, electrical heating, Generator with booster function, Frequency 40kHz, niveau control, incl. manual cover, incl. tray Hfedjx E S H Tjpfx Ahved without optional lifter function

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 3141, Technical characteristics: Core Specifications Attribute Value Ultrasonic Technology High-frequency cavitation system Tank Capacity Approx. 230 liters Cleaning Stages Multi-stage (pre-wash, ultrasonic, rinse, dry) Heating System Integrated, adjustable up to 60–80°C Ultrasonic Frequency 25 kHz Construction Material Stainless steel AISI 304 or higher Control System Programmable with safety interlocks Automation Options Basket lift, agitation, filtration, oil separation Hedpfexx Swvsx Ahvjfd Power Supply 400V / 50Hz Noise Level Approx. 70–75 dB(A) Features & Capabilities - Multi-phase cleaning: Includes vapor pre-treatment, ultrasonic washing, cold/hot rinsing, and hot-air drying. - Oil separation system: Utilizes skimming and decanting to maintain cleaner baths. - Modular design: Configurable with additional stations for drying, corrosion protection, or deionized rinsing. - Safety & Ergonomics: Enclosed chambers with polycarbonate windows and sensor-based safety systems. - Continuous-duty rated: Designed for high-throughput industrial applications. Machine status: WORKING

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 52915, Technical characteristics: # Payload Capacity: Basket size 530 x 320 x 233 mm # Tank capacity: 420L # Type of detergents: modified alcohol solvents # Washing chamber loading capacity: Max. 70 KG # Ultrasonic equipment: 4000W, 25kHz # Mechanical weight: 6000 Kg Electrical Equipment # Operating voltage: 400Vx3 # Connection power: 31 kW / rated current 63A Dimensions # Machine Dimensions (L×W×H): 2800 × 1750 × 2300 mm Equipment consists of: # Main machine Hosel, manual loading/unloading with special stainless steel support Hfodpsxwmkzjfx Ahved Machine status: WORKING

Condition: new, Year of construction: 2026, operating hours: 1 h, Ultrasonic cleaning device Glogar Ultrasonic 1600H Tank capacity max.: 162 litres Hfjdpfx Ajd Sfqqohvsd Basket dimensions (usable): 480 x 525 x 300h mm Inner tank dimensions: 600 x 600 x 450h mm Outer dimensions of the unit: 885 x 850 x 936h mm Ultrasonic frequency: 25 / 45 kHz (switchable) Ultrasonic power eff./max.: 2.000 / 8.000 Watt Heating power: 7.500 Watt Sweep: yes Pulse: yes Degas / Autodegas: yes Drain/diameter: 3/4 basket load: 50 kg The delivery includes 1 stainless steel basket and 1 noise protection lid. Delivery ex works (FCA), AT-4490 St. Florian b. Linz Device is produced in Germany! OTHER DEVICE DIMENSIONS AND DESIGNS ON REQUEST.

Condition: new, Year of construction: 2026, Ultrasonic washing system - ultrasonic cleaning device chamber made of stainless steel 1.4401 (AISI 316L) - incl. insulated hinged lid - incl. level control /dry run protection - incl. 1 piece stainless steel basket - floor ultrasound, frequency: 25 kHz, power (eff./peak): 750/1.500 Watt Hjdpfxok Ttkcj Ahvjfd - Heating adjustable up to 80°C; power: 5,000 watts - Basket dimensions: LxWxH 540 x 320 x 280h mm - Basin dimensions: LxWxH 650 x 400 x 350h mm - Outer dimensions: LxWxH 750 x 650 x 850h mm - max. loading weight of the basket: 30 kg - unit is mobile

Condition: new, Year of construction: 2026, Ultrasonic washing system - ultrasonic cleaning device chamber made of stainless steel 1.4401 (AISI 316L) - incl. insulated hinged lid Hfedpfelcctgex Ahvod - incl. level control /dry run protection - incl. 1 piece stainless steel basket - floor ultrasound, frequency: 25 kHz, power (eff./peak): 500/1.000 Watt - Heating adjustable up to 80°C; power: 5,000 watts - Basket dimensions: LxWxH 520 x 230 x 200h mm - Basin dimensions: LxWxH 600 x 300 x 270h mm - Outer dimensions: LxWxH 680 x 420 x 490h mm - max. loading weight of the basket: 20 kg - device is mobile

Condition: as good as new (ex-display), Year of construction: 2026, Ultrasonic cleaning system, ultrasonic washing system Hfodpfeyiy Hhjx Ahvod including automatic pneumatic goods lift; max. load capacity: 250kg Usable dimensions: Platform: 1,300 x 600 mm, usable height: 400 mm Ultrasonic immersion transducer mounted as bottom sonics Power: 5,000 watts effective / 10,000 watts peak – Frequency: 25 kHz Including surface rinsing/oil separator for bath maintenance External system dimensions approx.: L 2,130 x W 1,170 x H 1,780 mm Control: Siemens Logo Electrical connected load: 17 kW

Condition: as good as new (ex-display), Year of construction: 2024, Bath volume: 28 liters Inner tub dimensions: 500 x 290 x 200 mm Device external dimensions: 530 x 325 x 400 mm Hfodpfx Ahjhma S Rjvod Weight: 20 kg Ultrasonic frequency: 38 kHz Ultrasonic power eff./max .: 400/800 watts Heating capacity: 1,200 watts Total power consumption: 1,600 watts Sweep: yes

Condition: as good as new (ex-display), Year of construction: 2025, Ultrasonic Cleaning System ULTRA200 Platform dimensions: 850 x 450 mm Max. usable height: 400 mm Max. load weight: 100 kg Hfodpfxsv U A Ize Ahvsd Volume: 380 liters + 55 liters (oil separator) Heating: 2 x 4 kW Made entirely of stainless steel Heat and sound insulated External dimensions approx.: L 1,500 x W 950 x H 1,750 mm Control system: Fatek, HMI: Weintek Electrical power: 10.55 kW Includes: - Automatic pneumatic goods lift - Surface washing/oil separator for bath maintenance - Ultrasonic immersion transducer with 2-way sound - Power: 2,000 watts eff. / 4,000 watts peak - Multifrequency: 20 kHz / 40 kHz - Manual blow-off gun Demonstration system from the Glogar Technology Center, available immediately

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 35 h, functionality: fully functional, total width: 87 mm, total length: 120 mm, maximum load weight: 200 kg, heating capacity: 7.2 kW (9.79 HP), tank capacity: 400 l, warranty duration: 24 months, type of input current: three-phase, inner dimension height: 600 mm, inner dimension length: 800 mm, inner dimension width: 500 mm, overall weight: 150 kg, input voltage: 400 V, input frequency: 50 Hz, workpiece weight (max.): 200 kg, LCT NW 180 BSS demonstration tank Dual frequency 27/80 kHz Ventilated stainless steel control cabinet Hinged lid Tank completely insulated Stainless steel washing cork with four crane eyes and a basket bar for lifting Four adjustable feet for uneven floors Floor emptying via ball with inclined tray base for complete emptying Floor grating Bottom and 2 x side sound with a total output of 3000 watts Timer with timer and program control Connected load 10.2 KW Hfjdpfx Asq Rd R Djhved

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, IFP - KP50HYBRID Metal Degreasing and Cleaning System HYBRID Technology: Solvent-based and aqueous component cleaning in a single system. Demonstration unit, year of manufacture: 2024 Condition: As new Technical specifications: • Usable solvents/cleaners: modified alcohol (Alll) + water with detergent • Basket dimensions (L x W x H): 480 x 320 x 200 mm • Maximum basket weight: 50 kg • Throughput: 3 - 8 batches/hour • Connected load: 30 kW Hfedpfxex Ivtps Ahvjd • Energy consumption: 15 kWh • Compressed air: 6 bar • System dimensions (L x W x H): 3000 x 2000 x 3000 mm • System weight: 4,100 kg • System cooling: Air/water-cooled (customer-side chilled water supply required) System features: • Fully enclosed system design • Service doors • Rotating and swiveling device • Front loading with safety glass door • 2 buffer tanks for solvent • 2 buffer tanks for water • Ultrasonic cleaning equipment • Process filtration • Fine filtration • Intensive vacuum drying • 12'' touch panel • Sliding table with two basket stations • Preservation unit • Online access for remote maintenance

Condition: new, Year of construction: 2025, Manual operation with our ultrasonic cleaning technology, analogue control panel and temperature control via a digital thermostat Optional functions can be added to the PRO series. We have volumes from 60 to 7,500 L to meet all requirements. Tank capacity: 110L Außenmasse:1970x670x970mm Useful dimensions grate:550x350x250mm Hsdpfx Aef Hqavohvofd Ultrasonic frequency: 40kHz Ultrasonic power:1000W

Condition: as good as new (ex-display), Year of construction: 2026, - Usable internal dimensions: D=900mm H=580mm (other sizes available on request) Hedsf A D Itepfx Ahvsfd - Spray pressure: 3.2 bar - Basket load: 200kg - Tank volume: 130L - Standard equipment: • Oil skimmer - Discharge device • Frame, lid, and housing made of stainless steel • Timed electric steam extraction • Basket in stainless steel • Stainless steel filter on the pump suction side • Stainless steel heating elements • Mechanical basket rotation with geared motor • Electrical system IP 65, control via PLC (DGT V4) • Automatic water filling • Safety limit switch monitors the lid opening • Stainless steel spray nozzles • Weekly timer for heater and oil separator • Operating hours counter

Condition: new, Year of construction: 2023, Automate your cleaning process with Superior series machines: lifting device with support grid for effortless handling of parts, filter systems for dirt separation, exclusive oil separation system (OPS) and intuitive touch panel. Standard models available from 150 L to 8000 L TECHNICAL CHARACTERISTICS Exterior dimensions of the machine 2,140 x 1,540 x 1,720mm Interior dimensions of the vat 1,300 x 794 x 670mm Useful measurements of the parts grid 1,270 x 685 x 470mm Maximum load 400kg Height of the worktop 980mm Vat capacity L 692 Hfjdpfx Aef E Nt Dshved Power of the ultrasonic generator 4,800W Ultrasonic work frequency kHz 28 Heating element kW 12

Condition: new, Year of construction: 2026, Tank dimension: (lxwxh) 900 x 600 x 500mm Total dimension: (lxwxh) 1.080 x 780 x 750mm Wash tray outside dimension: (lxw) 840 x 540mm Loading cap. 60kg Filling volume cap. 240 Liters Ultrasonic Power: 12KW two ultrasonic activators, sidewards mounted heating power: 6KW, 30-70°C Hjdpfxec Riyco Ahvofd Electrical power 400V/50Hz Drainage valve, overflow valve, electrical heating, Generator with booster function, Frequency 40kHz, niveau control, incl. manual cover, incl. tray without optional lifter function

Condition: new, CleanMax-N Single Stage Ultrasonic Cleaners Hfedpfj Uldhex Ahvsd The CleanMax-N range of industrial sized single staged ultrasonic cleaners are designed to be used in industrial applications where heavy duty cleaning demands and performance are widely required. The CleanMax-N range are widely used for cleaning parts in the automotive, aviation, metal ware and many other industries where precise parts cleaning is essential prior to surface treatment or final assembly. The CleanMax-N range also offers a large amount of optional accessories ranging from pump filtration systems, oil separators, circulation pumps, weir systems and many more. - Tank capacities between 40 to 240 litres. - Constructed entirely of stainless steel (AISI 304). - Tank construction available in AISI 316L or AISI 316Ti. - Automatic shut of heaters at low water level. - Adjustment of the cleaning time & water temperature. - Models have a ultrasonic power adjustment feature: 50%, 75%, & 100%. - High efficiency piezoelectric ultrasonic transducers with special ceramics. - Drainage valve.

Condition: new, AutoClean Ultrasonic Celaning System AutoClean ultrasonic cleaning systems, specifically designed for the high and precision cleaning demands of transportation industries such as the aviation, naval, railway and even the engine remanufacturing and repair industries. The AutoClean range has been designed with engine components in mind, cleaning all types of parts from cylinder heads, injectors, engine blocks, brake discs, gearboxes and radiators could all benefit. The AutoClean’s cleaning ability is 16 times more effective than conventional hand washing and with the use of ultrasonic cleaning power this enables you to reach the smallest holes and compartments effectively, meaning cleaning those hard to reach places has never been easier. Hfodjd Hdvdspfx Ahvsd Tank capacities between 200 to 9,000 litres. 28kHz standard ultrasonic frequency. 40kHz with sweep generator option available. - Constructed entirely of stainless steel (AISI 304). - Tank construction available in AISI 316L or AISI 316Ti. - Automatic shut of heaters at low water level. - Available with vacuum drying option. - Adjustment of the cleaning time & water temperature. - Tailor made design with a large range of optional extras.

Condition: good (used), Year of construction: 2013, IFP Europe KP 50 HMA Basic Vacuum Parts Washer Mfd. 2013 S/N: 201305-00974 Specifications: Number of Baskets per Wash Cycle 1 Basket Size 11.9″ x 7.9″ x 17.7″ Hfodpfox Ddc Iex Ahvjd Machine Dimensions 70″ x 103″ x 70″ Chiller Size 5 ton Solvent Capacity 106 Gallon Wash Cycles Per Hour 4 to 8 Chamber “Max. Load Weight” 110 lbs Machine Weight 4,000 lbs Equipped With: Rotos & Vane Pumps, Liquid Ring Tank, Rust Inhibitor Tank Filter, Waste Oil Separator, Siemens Touch Screen Control, Budzar BWA-AC-05-FCB-12-0-000 5-HP Chiller, Safety Guarding, Light Curtains, Automatic Door, (3) Wash Settings, Rust/Vap/Mist/Vac/Oscillation Settings, 100-Lb. Batch Weight Repairs necessary: Pumps C301.00020 DVP LC106 Vane Pump — $5,500.00 C301.00078 Liquid Ring Pump — $3,561.55 C301.00081 RBS 45 Rotary Lobe Pump — $13,500.00 Pump Subtotal: $22,561.55 Accessories / Pipes for Conversion A508.00031 — $287.50 A508.00012 — $287.50 A508.00013 — $345.00 Accessories Subtotal: $920.00 Grand Total $23,481.55