Used Haas St for sale (242)

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 3,400 rpm, travel distance X-axis: 239 mm, travel distance Y-axis: 51 mm, travel distance Z-axis: 826 mm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS ST-30Y horizontal turning machine was manufactured in 2022. It features a 10-inch chuck, a maximum cutting diameter of 13.75 inches, and a cutting length of 32.5 inches. The machine includes a 12-station BMT-65 turret and live tooling speeds up to 4,000 rpm. Y-axis capabilities allow for off-center milling, drilling, and tapping. Consider the opportunity to buy this HAAS ST-30Y horizontal turning machine. Contact us for more information. • Chuck size: 10 in (≈254 mm) Nedpeyw N Dtofx Ahvswd • Maximum bar capacity (through spindle): 3 in (≈76 mm) • Maximum part swing over front apron: 31.75 in (≈806 mm) • Maximum cutting diameter: 13.75 in (≈349 mm) using BMT65 turret • Maximum cutting length: 32.5 in (≈826 mm) • Rapid traverse: X 472 in/min (~12 m/min), Y 472 in/min (~12 m/min), Z 945 in/min (~24 m/min) • Spindle bore: 3.5 in (≈88.9 mm) • Maximum torque: 300 ft-lb @ 500 rpm (≈407 Nm) • Turret: 12-station BMT65 • Live tooling speed: up to 4,000 rpm • Y-axis capability: off-centre milling, drilling, and tapping • Coolant capacity: 55 gal (~208 L) • Air requirement: 4 scfm @ 100 psi (~113 L/min @ 6.9 bar) • Electrical: 3-phase, 195–260 V (region dependent) • Footprint: 151 in × 70 in × 79 in (without conveyor) Additional equipment • Powered (live) tool holders • Various tool holders • Liners

Condition: good (used), Year of construction: 2011, Swing 806mm, Nwsdoywuvhepfx Ahvsd maximum cutting diameter 533mm, 762mm between centres, 660mm maximum cutting length, 76mm Bar capacity, 254mm 3 jaw chuck, 22.4kW Spindle Motor, 3400rpm spindle, 12 Station turret, tailstock, coolant, tool setter.

Condition: used, Year of construction: 2014, functionality: unexamined, machine/vehicle number: 3100007, CNC lathe with bar feeder Njdpfx Aoyv Avyshvewd

Condition: like new (used), Year of construction: 2022, operating hours: 105 h, functionality: fully functional, Haas ST50 Horizontal Turning Machine Slant Bed Lathe. Bought new directly from Haas and installed in Early 2023. As a "last of line" model from Haas (which they've yet to make this size since), this machine is fully loaded and as you can see from the build list below it is very well spec'd. It also only has 105 hours use. Viewing advised and welcome at our workshop in Canterbury, Kent. Videos can be sent and or uploaded to Youtube also. This machine and others we are selling are also listed else where. Please get in touch with us at Showan Hydraulics, Barham, Kent if you require any further details. £325,000 + VAT Nodoxrf Stopfx Ahvewd PRODUCT OVERVIEW • Maximum Capacity: 25.5" x 80" (648 x 2032 mm) • Spindle Bore: 8.5" (216 mm) • Swing Over Bed: 34.5" (876 mm) • Main Drive: 55 hp (41 kW) vector drive • Spindle Speed: 1200 rpm, 2-speed gearbox • Spindle Nose: Front and rear A2-15 • Chucks: 25" (635 mm) Manual 3-Jaw and 4-Jaw Chucks • Turret: 12-station bolt-on turret • Tailstock: Programmable servo with MT6 quill • Control System: 15" touchscreen interface with USB port, memory lock keyswitch, and colour remote jog handle • Additional Features: Rigid tapping and variable flow coolant pump _____ STANDARD FEATURES • Bolt-On Toolholder Kit: Comprehensive set of toolholders, sleeves, coolant block, and turning stick clamps for flexible setup. • 1200-RPM Spindle: Powerful 55 hp (41 kW) A2-15 spindle with 2-speed gearbox for optimal torque and speed. • Program Memory: 1 GB onboard memory for program storage and backup. • Coolant System: 95-gallon (360 L) tank with 3/4 hp (0.6 kW) pump del

Condition: new, Year of construction: 2023, functionality: fully functional, type of input current: three-phase, We offer this new Haas ST-10 CNC lathe, year of construction 2023. Voltage: 440 V Phase: 3 Frequency: 50/60 Hz Full load current: 20 A Largest load current: 18 A Short circuit interrupting capacity: 10000 A Short circuit current (rms symmetrical): 5000 A Nwedpoyvzilefx Ahvod Enclosure type: NEMA Type 2 If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2010, operating hours: 1,900 h, machine/vehicle number: IntNr231495, Used Haas ST-20SS (Super Speed) CNC turning centre, year 2010, including LNS Super Hydrobar 6.50 HS 4.6, year 2011. Technical Specifications: - 15-inch colour LCD monitor, user-friendly HAAS control - Maximum turning diameter: up to 254 mm - Maximum turning length: 533 mm Spindle: - Main spindle bearing defective! - Speed: max. 5,000 rpm - Drive power: 22.4 kW (30 hp) High-Performance Vector Drive - Spindle nose: A2-6 - Spindle bore: 88.9 mm Turret: - 24-station hybrid turret Rapid traverse: - 24.0 m/min (X-axis) Nsdpfxeytrwge Ahvowd - 30.5 m/min (Z-axis) Equipment: - Automatic tool presetting system (Auto Probe Arm) - Unit for driven tools - LNS Super Hydrobar 6.50 HS 4.6 (year 2011), suitable for bar diameters from approx. 5 mm to 50 mm (expandable to 65/68 mm within the HS series, depending on the model) The machine can be inspected under power by appointment. Technical data and specifications may be subject to change and error. Subject to prior sale.

Year of construction: 2011, condition: ready for operation (used), Control Unit Brand HAAS This 3-axis HAAS ST-30 horizontal turning machine was manufactured in 2011. It features a 10" chuck, 3400 rpm spindle speed, live tooling with a C-axis, a toolsetter, and a conveyor. It also includes a 12 x VDI40 turret and a tailstock. If you are looking to get high-quality turning capabilities, consider the HAAS ST-30 machine we have for sale. Contact us for more information. Application Types Turning Nedpfxsx H Uz Ao Ahvswd

Condition: ready for operation (used), Year of construction: 2014, operating hours: 5,316 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 213 mm, travel distance Y-axis: 51 mm, travel distance Z-axis: 572 mm, number of axes: 3, This 3-axis HAAS ST-20Y was manufactured in 2014. It features a CNC lathe with C and Y-axis capabilities, a spindle speed of 4000 rpm, and a chuck size of 8 inches. Additional features include a 12-station turret, chip conveyor, and a programmable hydraulic tailstock. Ideal for precision turning operations. If you are looking to get high-quality turning capabilities consider the HAAS ST-20Y machine we have for sale. Contact us for more information about this machine. • Chuck size: 8" (210 mm) • Programmable hydraulic tailstock: MT4 • Standard program memory: 1 GB Nwedpex D Nzpjfx Ahvjd Additional equipment • Chip conveyor • Automatic tool presetter • Part catcher • USB port • 6 live tools (3 axial and 4 radial) • BOT holder and VDI holder

Condition: ready for operation (used), Year of construction: 2020, spindle speed (max.): 3,400 rpm, number of axes: 4, This 4-axis HAAS ST-30Y horizontal turning machine was manufactured in 2020. It features C+Y-axis capability, a 3,400 rpm A2-6 spindle, and a 12-station BMT65 turret. The machine is equipped with an automatic tool presetter, bent-type chip conveyor, and programmable tailstock. The machine can be inspected under power and test cuts are possible upon request. Contact us for further details. Njdpoyh Hw Iofx Ahvjwd • Running hours: 556 h • C+Y-axis • 3,400 rpm A2-6 spindle • 12-station BMT65 turret • Programmable Tailstock Additional equipment • Bent-Type Chip Conveyor • Oil skimmer • Exhaust system • Automatic Tool Presetter (ATP) • WIFI camera • Remote Jog Handle

Condition: ready for operation (used), Year of construction: 2019, operating hours: 11,111 h, spindle speed (max.): 4,000 rpm, controller manufacturer: HAAS, controller model: n/a, This HAAS ST-20 was manufactured in 2019. A robust horizontal turning machine featuring a 210mm hydraulically actuated chuck, a VDI turret with 12 tool stations, and a spindle speed of 4,000 rpm. It supports a maximum load of 330 x 572 mm and bar diameters up to 64 mm. Ideal for precision turning operations. Contact us for more information about this machine. Additional equipment • Additional Options: Driven 4000 rpm tool and C-axis, 12 stations BMT65, Automatic tool presetting arm • Features: Hinged belt chip conveyor, Lathe parts catcher • Coolant System: 208l coolant tank, Variable coolant flow • Other Features: Visual part programming system (1GB), Hydraulically actuated 210mm chuck A2-6, Early detection module for power failure, Synchronized tapping, safe running, Control touchscreen, Ethernet, HaasConnect, HaasDrop, M130, WLAN • Additional Features: Macros, SOM Machine Benefits Technical Machine Benefits • Maximum load capacity: 330 x 572 mm / diameter range for bars: 64 mm • Type: vdi turret with 12 tool stations Nedpsx D Ezfefx Ahvswd • Type: programmable hydraulic tailstock • Preparation for robot / driven tools

Condition: ready for operation (used), Year of construction: 2019, operating hours: 3,728 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 213 mm, travel distance Y-axis: 51 mm, travel distance Z-axis: 572 mm, spindle motor power: 149,000 W, bar diameter (max.): 64 mm, controller manufacturer: HAAS, controller model: NGC, number of slots in tool magazine: 12, swivel angle C-axis (max.): 360 °, number of axes: 4, This HAAS ST-20Y lathe, manufactured in 2019, features a Y-axis, tailstock, automatic tool probe, and chip conveyor. With a spindle speed of up to 4000 rpm and driven tools supported by a C-axis, it offers strong capabilities for complex machining. If you are looking for a high-quality turning solution, consider the HAAS ST-20Y we have for sale. Contact us for more information. • Chuck size: 210 mm • Maximum part length: 533 mm • Maximum turning diameter: 298 mm • Maximum turning length: 572 mm • Spindle bore capacity: 64 mm • Axis travels: • X-axis: 213 mm • Y-axis: ±51 mm • Z-axis: 572 mm • Spindle nose: A2-6 Additional equipment Nwodpfex D Hn Tox Ahvod • Driven tools • C-axis • ATP – Automatic tool probe • PTS – Hydraulically controlled tailstock • CONVEYOR – Chip conveyor • Without additional tools or tool holders Technical Specification Driven Tools Yes

Condition: good (used), Year of construction: 2017, functionality: fully functional, The machine is in very good technical condition; testing is possible by prior arrangement. Nwjdsyr Spyjpfx Ahved

Condition: excellent (used), Year of construction: 2022, operating hours: 600 h, chuck outer diameter: 160 mm, Delivered new in 2023 . pictures show covers off while being serviced- showing as new condition inside. High spec machine as new. Tool setter swarf conveyor Tailstock Parts catcher Tooling as show. ONLY 600 CUTTING HOURS, NEAR NEW CONDITION Nsdpfx Ahjx U D Etevewd Omega Design solutions run over 20 Haas machines and can help with all aspects of getting this machine up and running on you parts.

Condition: excellent (used), Year of construction: 2020, Swing 533mm, 298mm max. machining diameter, 572mm cutting length, 3400rpm spindle, 76mm bar capacity, 12 station turret, Y axis -/+ 50.8mm, 22.4kW spindle motor, HAAS control, 254mm 3 jaw chuck, tool setter, swarf conveyor, coolant, Tailstock, Nwedpfx Asvygv Hohved

Condition: like new (used), Year of construction: 2023, operating hours: 800 h, functionality: fully functional, machine/vehicle number: SN3128158, turning diameter over cross slide: 533 mm, turning length: 572 mm, spindle bore: 63 mm, spindle speed (max.): 4,000 rpm, New condition + tooling + bar fender Nwsdsvwz T Uepfx Ahvjd

Condition: ready for operation (used), Year of construction: 2014, operating hours: 812 h, functionality: fully functional, machine/vehicle number: 3097971, turning length: 2,032 mm, turning diameter: 648 mm, spindle speed (max.): 2,400 rpm, travel distance X-axis: 432 mm, travel distance Z-axis: 2,032 mm, Turn-mill center with only 812 operating hours! TECHNICAL DETAILS Working area Max. turning length: 2,032 mm Max. turning diameter: 648 mm Travel X-axis: 432 mm Nwjdsw Nwq Djpfx Ahved Z-axis: 2,032 mm Spindle Spindle nose: A2-8 Spindle speed: 2,400 rpm Spindle bore: 117 mm Bar capacity: 102 mm Spindle motor power: 30 kW Chuck size: 381 mm Tool changer Stations: 12 MACHINE DETAILS Dimensions Dimensions (L x W x H): 6,750 x 2,200 x 2,300 mm Weight: 13,400 kg Operating hours: 812 h EQUIPMENT Fully programmable servo tailstock Chip conveyor Handwheel Pallet with tools

Condition: good (used), Year of construction: 2016, operating hours: 5,200 h, functionality: fully functional, machine/vehicle number: 3106428, turning length: 1,118 mm, turning diameter over cross slide: 648 mm, turning diameter: 648 mm, spindle motor power: 4,100 W, spindle speed (min.): 150 rpm, spindle speed (max.): 2,400 rpm, spindle bore: 117 mm, travel distance X-axis: 432 mm, travel distance Z-axis: 1,118 mm, rapid traverse X-axis: 18 m/min, HAAS ST-40 Used - Condition: Good to Very Good - CNC Lathe - 25.5" x 44" (648 x 1118 mm) - Maximum Travel: 4.0" (102 mm) - Bar Capacity: 34.5" (876 mm) - 40 HP (30 kW) Vector Drive - 2400 rpm - 2-Speed Gearbox - A2-8 Spindle - 15" (381 mm) Chuck - 12-Station BOT Turret - 15" LCD Color Monitor - Memory Lock Key Switch - USB Port Nwodpfx Aewmmzbohvod - Portable Control Panel and Synchronized Tapping - Standard Toolholder Set with BOT and Hybrid Turret

Condition: ready for operation (used), Year of construction: 2014, operating hours: 316 h, functionality: fully functional, machine/vehicle number: 3097899, turning length: 355 mm, turning diameter: 229 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 355 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Chuck size: 165 mm Maximum turning diameter: 229 mm Turning length without workpiece holder: max. 355 mm Bar capacity: 44 mm Spindle Maximum spindle speed: 6,000 rpm Njdpfx Aewy Rxdehvewd Motor power: max. 11.2 kW Torque: max. 102 Nm at 1,300 rpm Spindle nose: A2-5 Spindle bore: 58.7 mm Swing Diameter Over front cover: 641 mm Over cross slide: 413 mm Over tailstock: 597 mm Travel and Feed Rates X-axis travel: 200 mm Z-axis travel: 355 mm X-axis rapid traverse: 30.5 m/min Z-axis rapid traverse: 30.5 m/min MACHINE DETAILS Electrical Data Power supply (3-phase): 354 - 488 V Dimensions Operating height: max. 1,803 mm Operating width: max. 3,200 mm Operating depth: max. 2,108 mm Operating Hours Power-on time: 7,291 h Cycle start time: 316 h EQUIPMENT 15" LCD color display with USB interface 1-MB program storage Synchronized tapping BOT turret with 12 tool stations

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: ST-35, Haas ST-35 CNC lathe - precision and performance for your production -used- Increase your manufacturing efficiency with the proven quality and performance of the Haas ST-35! This robust CNC lathe offers you the perfect combination of power, accuracy and flexibility for a wide range of applications. Highlights: • Large turning diameter: Ideal for machining large and complex workpieces. • Powerful spindle: High speeds and strong torque for demanding materials. • Precise control: User-friendly Haas control for easy programming and short set-up times. • Robust design: Durable and low-maintenance - perfect for continuous use. • Flexibility: Versatile applications thanks to various tool holders and options. Perfect for: • Metalworking • Prototype construction • Small and large series production Nwedpfxov Hcz Se Ahvod The Haas ST-35 is ready to use straight away and is waiting to take your production to the next level. Interested? Contact us now for more information or a viewing! Don't miss this opportunity - invest in quality and precision! The machine can be viewed and tested at any time by appointment. We also offer an assembly service including installation for you. Please refer to the attached PDF for important technical information.

Condition: excellent (used), Year of construction: 2022, operating hours: 2,394 h, functionality: fully functional, Controller HAAS Swing dia. 641 mm Swing over carriage 413 mm Maximum cutting diameter 229 mm Maximum cutting length 356 mm X axis travel 200 mm Y axis travel +/-50 mm Z axis travel 355 mm Bar Capacity 44mm C axis 0,01 degrees Spindle Speed 6000 rpm Spindle Nose A2-5 Milling spindle speed 6000 rpm Rapid Feedrates X/Y/Z = 30,5 / 12,7 / 30,5 m/minute Spindle Motor Power 11 kW Turret Positions 12 stations Tool holder type VDI30 Weight 3600 Kg Dimensions LxWxH = 3048 x 2108 x 1803mm Accesories, features - C Axis programmable Nwjdpfx Ahowvf Thevod - Y Axis - Live tool turret (each places) - Integrated tool presetter - Chip conveyor - 3 jaws hydraulic chuck D160 mm - Tailstock - Foot pedal - Machine mounts - Manuals The machine is barelly used and is in great technical and optical condition.

Condition: excellent (used), Year of construction: 2023, operating hours: 1,168 h, functionality: fully functional, Controller HAAS Swing dia. 641 mm Swing over carriage 413 mm Maximum cutting diameter 229 mm Maximum cutting length 356 mm Nwodpewvgbyjfx Ahved X axis travel 200 mm Z axis travel 355 mm Bar Capacity 44mm Spindle Speed 6000 rpm Spindle Nose A2-5 Rapid Feedrates X/Y/Z = 30,5 / 30,5 m/minute Spindle Motor Power 11 kW Turret Positions 12 stations Weight 3200 Kg Dimensions LxWxH = 3048 x 2108 x 1803mm Accesories, features - Integrated tool presetter - Chip conveyor - 3 jaws hydraulic chuck D160 mm - Without tailstock - Foot pedal - Machine mounts - Manuals The machine is barelly used and is in great technical and optical condition.

Condition: used, Year of construction: 2019, operating hours: 5,900 h, functionality: fully functional, Automatic Tool Presetter, Belt-Type Chip Conveyor, Tailstock with Hydraulic Quill, User-Definable Macros, Visual Part Programming System, Part catcher. Nodpfx Aexp Hn Dshvewd

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning length: 863 mm, turning diameter: 432 mm, rotational speed (max.): 3,400 rpm, swing diameter over bed slide: 762 mm, controller model: Haas CNC Control, TECHNICAL DETAILS Turning diameter: 432 mm Turning length: 863 mm Spindle speed: 3,400 rpm Spindle bore: 88 mm Tool turret: 12 stations Nwjdpfoywhfvsx Ahvod Tool holder: VDI 40 Swing diameter over bed: 762 mm Swing diameter over cross slide: 432 mm Three-jaw chuck diameter: 254 mm Tailstock quill ISO: 290 Bar capacity: 76 mm Travel Z-axis: 864 mm Travel X-axis: 287 mm MACHINE DETAILS Control: Haas CNC Control Spindle motor power: 22 kW Dimensions & Weight Required space: 3.9 x 2.0 x 1.9 m Machine weight: 7.25 t EQUIPMENT Technical documentation

Condition: good (used), Parts on table not come. Marked with red. Njdpfxewxdyxj Ahvewd

Condition: good (used), Year of construction: 1999, Machine is in good condition. X 750 mm Nwjdpswx Rafjfx Ahvsd Y 400 mm Z 500 mm 10.000 rpm