Used Manual Lathe for sale (19,211)

Year of construction: 2007, condition: excellent (used), functionality: fully functional, Specification 360/N Bsdpfjzum Afex Afgjwu Type Manual Laminator 360/N Application Laminating dry-film photoresist onto PCBs Max. panel width 635 mm Material thickness approx. 0.05 – 12.7 mm Laminating rollers 2, both driven Temperature control Thermoregulators for the laminating rollers Drive Adjustable transport speed Control PLC Compressed air Required for pneumatic functions Film Dry-film photoresist Design Manual laminator Manufacturer/documentation Duesse / Shipley, Rohm & Haas

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 602/02, center width: 4,000 mm, center height: 415 mm, spindle speed (max.): 1,600 rpm, controller model: Control System Euro Turn, TECHNICAL DETAILS Maximum turning height: 415 mm Turning diameter over bed: 830 mm Turning diameter over slide: 540 mm Distance between centers: 4,000 mm Spindle bore: 130 mm Spindle speed: 2–1,600 rpm MACHINE DETAILS Control method: Teach-in Control system brand: Monforts Control system type: Control System Euro Turn Power: 55 kW Dimensions & Weight Dimensions (L x W x H): 6,750 x 2,100 x 2,020 mm Net weight: 7,500 kg Transport packages: 2 units Bwedpfoz Ebbzsx Afgju EQUIPMENT Documentation CE marking

Condition: used, Technical details: Bsdpfxsvbh N Re Afgewu turning length: 630 mm swing diameter over slide rest: Hinterdrehschlitten: 250 mm center height over bed: 270 mm centre distance: 900 mm spindle bore: 26 mm range of revolutions per minute - continous: 1,8 - 450 U/min return movement speed: 23 / 32 / 46 / 370 / 510 / 740 U/min cross feed: 0,07 - 1,11 / 36 step mm/U longitudinal feeds:: 0,063 - 0,63 / 12 step mm/U tailstock quill taper MT: 5 quill travel: 250 mm Total power requirement: 7,0 kW machine weight approx.: 3,9 t dimension machine xH: 3,2 x 1,2 x 1,8 m Application: Mainly for relief turning and relief grinding of cutting tools (especially hobs with and without thread pitch). Back turning and relief grinding is possible from the front, the back and in the axial direction of the machine. Main drive via 8-stage manual gearbox. Feed gearbox is designed as a 12-stage manual gearbox. Swiveling range of the rear slide = 360deg. Swiveling range of the cross slide = 360degrees Equipment: lathe chuck driving disc Ø 210 mm with fixed tip fixed tip in tailstock with 4 pieces machine feet 3 jaw chuck Ø 250 mm i.D. *

Condition: ready for operation (used), functionality: fully functional, turning length: 590 mm, turning diameter: 300 mm, spindle bore: 65 mm, spindle speed (max.): 4,500 rpm, controller manufacturer: Fanuc, TECHNICAL DETAILS Travel in X-axis: 221 mm Travel in Z-axis: 590 mm Swinging diameter: 300 mm Turning length: 590 mm Swinging diameter over bed: 425 mm Bsdpfx Aoz Ahxksfgswu Spindle speed: max. 4,500 rpm Spindle bore: 65 mm MACHINE DETAILS Control system: Fanuc

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, turning diameter: 1,270 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 5 rpm, spindle motor power: 30,000 W, rotational speed (min.): 5 rpm, rotational speed (max.): 6,000 rpm, total height: 5,000 mm, total length: 8,000 mm, workpiece weight (max.): 6,000 kg, torque: 190 Nm, overall weight: 22,000 kg, spindle nose: HSK100, Equipment: documentation/manual, rotational speed infinitely variable, The spindle was completely overhauled in 2025! The invoice for the spindle overhaul is attached. TECHNICAL DETAILS Bodpfsz Hmhisx Afgjwu General Information Manufacturer: Konrad Seidler Model: MINIMAX 1800 Year of Manufacture: 2013 Machine Type: CNC rotary table turning, boring, and milling center Operating Mode: Single-shift operation Machine Weight: approx. 22,000 kg Control and Drive Control System: Siemens 840D SL Drives: SINAMICS 120 Turning Range and Rotary Table Turning Diameter: 500–1,270 mm Rotary Table Load Capacity: 6,000 kg Rotary Table Speed: 5–500 rpm Boring and Milling Spindle Boring/Milling Spindle Power: 30 kW Torque: 190 Nm Boring/Milling Spindle Speed: 2–2,500 rpm Boring/Milling Spindle Speed: max. 6,000 rpm Tool Holder: HSK100 Tool Changer Tool Changer: 16 tools Coolant System Coolant Pressure: 6 bar High-Pressure Coolant Pressure: 30 bar Chip Conveyor Chip Conveyor: Cross conveyor, discharging to the left Discharge Height: 1,200 mm Machine Enclosure Enclosure: Double sliding door Work Area: Walk-in Spindle Overhaul Year of Spindle General Overhaul: 2025 Investment Costs: 36.5 thousand EUR EQUIPMENT Chip Conveyor Walk-in Work Area High-Pressure Coolant System Tool Changer with 16 Positions HSK100 Tool Holder Double Sliding Door Operating Manuals Installation Documents Wiring Diagrams, partially available Documentation of Machine Components Documents for the Control System Documents for the Chip Conveyor Other Original Documents from Commissioning Documents for the Spindle Overhaul Test Report of the Spindle Overhaul Extensively Overhauled Capellini High-Performance Spindle Renewed Precision Bearings Renewed HSK100 Clamping System Renewed Balluff Sensors Refurbished Spindle Shaft Renewed Wear Parts Finely Balanced Spindle according to ISO 1940 System-Balanced Spindle Assembly Chuck and Jaws

Condition: used, Year of construction: 2001, Technical details: turning diameter over bed: 410 mm turning dia. over face-slide: 200 mm turning length: 950 mm bed width: 330 mm turning diameter over support: 410 mm face slide travel: 630 mm centre height: 200 mm control: Siemens/Weiler D2 milling spindle dia. in forward position: 90 mm spindle bore: 54 mm range of revolution per miute: 1 - 3000 U/min feed speed: 0 - 20 mm/U rapid travel - longitudinal/face: 10/5 m/min tailstock taper MT: 4 diameter of quill: 65 mm quill stroke: 120 mm weight of the machine ca.: 2,1 t dimension machine approx.LxWxH: 2,3 x 1,4 x 1,7 m The E35 is neither a purely manual machine nor a classic CNC, but a hybrid: Work like on a conventional lathe Automatic cycles at the push of a button No complex programming required Extremely fast for single parts & small batch production Also suitable for operators without CNC knowledge Weiler describes it as follows: Simple parts like conventional machining Complex parts like CNC, but easier Bwedpfx Aozd Sg Ijfgou *

Condition: used, Year of construction: 1983, turning diameter over bed 1790 mm turning diameter over slide rest 1250 mm turning length 5000 mm faceplate 1250 mm workpiece weight 45 t control Siemens type System 8 T mm turning speeds 1,1-300 U/min Bwedey D A D Tepfx Afgeu total power requirement 72 kW The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: like new (used), Year of construction: 2021, functionality: fully functional, spindle bore: 40 mm, turning diameter over bed slide: 330 mm, center width: 635 mm, spindle speed (max.): 2,500 rpm, overall weight: 700 kg, TECHNICAL DETAILS Center distance: 635 mm Swinging diameter over bed: 330 mm Swinging diameter over cross slide: 210 mm Swinging diameter in the gap: 480 mm Toolmaker's accuracy: DIN 8605 Main spindle bore: 40 mm Spindle mount: DIN 55029 D1-4 Bwedpfx Afszz Rm Isgeu Speed steps: 12 Speed range: 40–2,500 rpm Taper in tailstock: MK 3 Tailstock quill travel: 110 mm Longitudinal feeds: 0.03–2 mm/rev Cross feeds: 0.015–1 mm/rev Metric threads: 0.2–14 mm Whitworth threads: 2–56 threads per 1" MACHINE DETAILS Drive power: 2.2 kW Dimensions & Weight Dimensions (L × W × H): 1,700 × 1,000 × 1,400 mm Weight approx.: 700 kg EQUIPMENT 2-axis digital read-out ACU-RITE® DRO 203 Quick-change tool holder MULTIFIX Chip collection tray with front opening flap Adjustable tool holder guard Rear splash and chip guard Chuck guard Spindle cover Removable bridge Coolant system Work area lighting Threading dial Foot brake with brake pedal over the entire length Operating manual with CE declaration of conformity

Condition: ready for operation (used), Year of construction: 1961, Maximum height: 200 mm Distance between centers: 1000 mm Spindle bore: 52 mm Spindle mounting, short taper size: 6 Taper of the tailstock quill: MK 4 24 spindle speeds: 21 - 1300 rpm Feed rates: 0.03 - 0.88 mm Bwsdpfx Aozvw Tkefgsu Module threads: 0.5 - 15 module Inch threads: 2 - 48 threads/inch Drive motor: 380 V, approx. 10 kW Space requirement: 2600 x 1000 x 1400 mm Weight, approx.: 2.5 t

Condition: used, Year of construction: 2006, functionality: fully functional, turning diameter: 1,000 mm, controller model: Siemens 840 D, tool length: 500 mm, number of slots in tool magazine: 44, TECHNICAL DETAILS Bwodpfez Hmc Tjx Afgeu Working area Swing diameter: 1,000 mm Swinging diameter: 1,000 mm Z-axis travel: 900 mm MACHINE DETAILS Control system: Siemens 840 D Tool holders: SK 50, VDI 60 Tool magazine: 44 positions Tool weight: max. 35 kg Tool length: max. 500 mm

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, L&Z Lathe KMUTH BASIC Plus incl. 3-axis digital display - Year of manufacture 2011 - CE marking - Three-axis digital display - Center height 150mm - Max. turning diameter 300mm - Max. turning diameter over support 178mm - Max. turning diameter without bridge 430mm - Center distance 810mm - Spindle bore 38mm - Spindle speeds (geared) 60 - 1550 rpm (9 steps) - Automatic longitudinal / facing feeds - Spindle mount - Camlock D1 - 4" - Tailstock taper MK 3 - Quill travel 100mm - Bed width 180mm - Multifix base with insert - Electric chuck guard - Work light - Coaxial center - 3-jaw chuck - 2 x steady rests Bedoz Hwx Eopfx Afgswu - Documentation Dimensions: L x W x H 1.6 x 0.7 x 1.6 meters / Weight 550 kg Errors and omissions excepted.

Condition: ready for operation (used), Year of construction: 1971, Center lathe, manufactured by VOEST ALPINE, type DA 210, year of manufacture 1971. Chuck: 315 mm, tool holder: Multifix B with 2 tool pockets. Center height: 210 mm Distance between centers: 1000 mm Spindle bore: 46 mm Spindle speeds: 28 - 2000 rpm Further details can be found in the data sheet. Machine in good, ready-to-use condition. Bwedpfx Ajz Eilnjfgou Machine documentation available. Weight: approx. 1200 kg

Condition: repair required (used), Storage number: 3126 Manufacturer: Potisje Year of manufacture: 2000 Type / Model: USA 250 Serial number: 8763 Control: conventional Bjdpfxoz Ilame Afgewu Distance between centers: 1,000 mm Bore diameter: 105 mm Height of centers: 260 mm Turning diameter over bed: 510 mm Over cross slide: mm Over carriage: 310 mm Spindle speed range: 22 to 1,500 rpm Longitudinal feed: 0.023 to 2.84 mm/rev Cross feed: 0.012 to 1.42 mm/rev Power connection: 7.5 kW Accessories/Equipment: Thread cutting device, digital display Condition: Gearbox defective Weight: approx. 2.5 t Dimensions: 3,200 x 1,100 x 1,350 mm

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, turning diameter over cross slide: 470 mm, spindle bore: 150 mm, turning diameter over bed slide: 750 mm, turning diameter over top slide: 470 mm, feed length Z-axis: 2,000 mm, spindle speed (max.): 1,030 rpm, Center height on the machine bed: 360 mm Width of the machine bed: 450 mm Width of the recess: 450 mm Maximum turning diameter on the machine bed: 750 mm Maximum turning diameter on the recess: 910 mm Maximum turning diameter on the carriage: 470 mm Spindle bore diameter: 150 mm Bsdpfx Afez Iraysgowu

Condition: good (used), Year of construction: 2016, operating hours: 23,500 h, machine/vehicle number: 8107000021B, spindle bore: 32 mm, spindle speed (max.): 8,500 rpm, overall weight: 4,300 kg, total length: 7,500 mm, total height: 2,500 mm, total width: 1,600 mm, number of spindles: 2, Equipment: documentation/manual, DMG MORI GILDEMEISTER SPRINT 32/5 – Short/Long Turning Center Well-maintained machine, low operating hours, including IEMCA BOSS 338/32 HD bar feeder (up to 3,200 mm bar length), year of manufacture 2016, as well as conversion kit to long turning center (Swisstype kit) for short and long turning on one machine. Delivery conditions: Free on truck. Location: 58332 Schwelm Availability: Immediate - by arrangement NOTE: The machine must be picked up on a fixed date in mid/late October 2026; the exact date will be provided in advance! Payment terms: Payment in advance - by bank transfer. Technical data: Control: FANUC 32i MB Operating hours recorded: 25,263 Spindle hours recorded: 22,772 MAIN SPINDLE DATA: Max. turning diameter: 32 mm (bore for draw tube: 38 mm) Stroke Z1: 100 mm Max. speed: 8,500 RPM Drive power S1: 5.5 kW COUNTER SPINDLE DATA: Max. turning diameter: 32 mm (bore for draw tube: 38 mm) Stroke Z2: 200 mm Max. speed: 8,500 RPM Drive power S1: 2.2 kW AXIS DATA X1: Travel: 70 mm Max. speed: 40 m/min Max. acceleration: 5 m/s² AXIS DATA Y1: Travel: 405 mm Max. speed: 30 m/min Max. acceleration: 5 m/s² AXIS DATA X2: Travel: 300 mm Max. speed: 40 m/min Max. acceleration: 5 m/s² TOOL HOLDER DATA – SLIDE 1: Diameter of tool holder: 25 mm Number of fixed tools for external machining: 6 Tool holder size: 16 × 16 mm Number of driven tools: 4 Bsdpfx Afozxhdlegswu Collet type: ESX20 TOOL HOLDER DATA – SLIDE 2: Number of fixed tools for internal machining: 4 Diameter of tool holder: 25 mm Scope of supply: IEMCA BOSS 338/32 HD bar feeder (up to 3,200 mm bar length), year of manufacture 2016 Chip conveyor Available manuals Accessories as shown in the pictures Dimensions & weights: Installation dimensions L x W x H approx.: 7500 x 1600 x 2500 mm Weight approx.: 4300 kg Attention: Disc damaged! If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional notes: ►If desired, we can offer transport to the destination. ►The quoted price is net plus VAT. ►The goods are sold excluding any warranty. ►Technical data is without guarantee. ►Subject to prior sale. ❗The sale of the goods is exclusively to business customers❗

Condition: used, Year of construction: 1963, turning diameter over bed 390 mm turning diameter over slide rest 190 mm turning length 1000 mm turning dia. in gap 460 mm spindle head DIN 55026 Gr. 6 spindle bore 52 mm turning speed range 11,2 - 2240 U/min power requirement 7,5 kW bed width 355 mm dimensions 2,8 x 1,3 x 1,6 m weight of the machine ca. 1,9 t Bwjdpfsy Tyyqex Afgju Equipment: - Multifix "B" with 5 pic. toolholders - 3-jaw-chuck Ø 250 - coolantsystem - 2-axis digital readout Heidenhain - some jaws

Condition: ready for operation (used), functionality: fully functional, L&Z Lathe WEILER LZ 330 incl. new 3-axis digital display (from an educational institution) -3-axis digital display "NEW" -Center height 165mm -Swinging diameter over bed 330mm -Turning length 800mm -Spindle speed range (geared) 25 - 2800 rpm -Automatic longitudinal / cross feeds -New Multifix base and inserts -Collet chuck and various collets -3-jaw chuck -Original copying attachment -Various accessories -Documentation Bwsdpfjz Ihvkjx Afgsu Dimensions: L x W x H 1.8 x 0.7 x 1.6 meters / Weight 800kg Errors and omissions excepted.

Condition: good (used), Scherer Feinbau PM 1 FZ precision lathe, finishing lathe, lathe similar to Weiler, with extensive accessories as shown in the pictures. Equipment: Bedpfx Ajz Ip Rijfgjwu - Hand lever cross slide with Multifix quick-change system design - Collet chuck with draw-in collets Technical data: - Spindle bore: - Spindle speeds: 700/1400/2800 (left/right) - Center height: 110 mm - Center distance: 160 mm - Largest diameter over bed: 220 mm Accessories: Draw-in collets 359 E K 23 as shown in the pictures. Shipping by arrangement.

Condition: good (used), Precision lathe Scherer Feinbau PM 1 FZ Precision lathe Scherer Feinbau PM 1 FZ, finishing lathe, lathe similar to Weiler, with numerous accessories as shown in the pictures. Equipment: - Collet chuck with draw-in collets Technical data: - Spindle bore: - Spindle speeds: 700/1400/2800 (left/right) - Center height: 110 mm Bwodpoz Iptwofx Afgsu - Center distance: 160 mm - Largest swing over bed: 220 mm Accessories: Draw-in collets 359 E K 23 as shown in the pictures Coolant system Shipping by arrangement.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, spindle speed (max.): 6,000 rpm, bar passage: 65 mm, Equipment: bar feeder, chip conveyor, TECHNICAL DETAILS Tool turret Number of turrets: 3 Tool holder: VDI 25 W-gear Bjdpfx Asz Ibf Esfgswu Main and counter spindle Main and counter spindle speed: up to 6,000 rpm Bar diameter: 65 mm MACHINE DETAILS Coolant tank: 600 l Coolant pressure: 8 / 18 bar EQUIPMENT Gantry removal device Hainbuch HS Axzug / GS Axfix Chip conveyor Coolant tank with strainer basket Coolant pump Coolant cooling unit FMB Turbo 10-65, 3-meter bar feeder

Condition: excellent (used), Year of construction: 2019, operating hours: 198 h, functionality: fully functional, Kodak Achieve 800 V Manual S Model TEE Year of manufacture: 2019 Bjdpfxszlr H Dj Afgswu

Condition: good (used), Year of construction: 2002, Control system OSP U 100L, Swing over bed 530 mm, Swing over cross slide 420 mm Max. turning diameter 340 mm Turning length 1000 mm Travel X 260 mm Z 1020 mm C 0.001° Spindle speed (2 ranges) 38 – 3,800 rpm Spindle power 22/15 kW Spindle bore 80 mm Bar capacity 70 mm Number of tools in turret/driven 12/12, VDI 40 Driven tool speed 4,500 rpm, 5.5/3.3 kW, Chuck diameter 315 mm Bwedez Hwf Eopfx Afgsu Machine dimensions 3310 x 1895 x 1925 mm, 6.000kg 3 pcs driven tool holders, 5 pcs fixed tool holders. Chip conveyor, Tailstock with hydraulic locking, Tool measuring equipment,

Year of construction: 2014, condition: excellent (used), functionality: fully functional, machine/vehicle number: VT 2573, MACHINE SPECIFICATION Height of centres 195mm Swing over bed 400mm Swing over cross slide 246mm Swing in gap 585mm Width in front of faceplate 165mm Bed length between centres 1250mm Spindle speeds (infinitely variable) 0-2500rpm Spindle nose mounting (Camlock) D1-6 Spindle bore 54mm Spindle motor 7.5kW Width over bedways 318mm Travel of cross slide 250mm Travel of top slide 130mm Bwsdpfxez Im Nio Afgeu Travel of tailstock barrel 178mm Taper in tailstock barrel No. 5 MT Approx. Weight 1800Kg Machine in Metric execution Machine Equipped with Acu-Rite 2 Axis Digital Readout System 3 Jaw chuck Quick change toolpost 5 Position turret Bedstop Single Bedstop Saddle guard Lighting Coolant system Chuck guard Rear splashguard

Condition: ready for operation (used), Year of construction: 2000, overall weight: 12,500 kg, Vertical, heavy-duty CNC turning machine with Fanuc control; 630 power chuck; 850 mm turning diameter; no driven tools; good condition; chip conveyor; Bjdpfxsz Ea E Es Afgewu various tool holders; machine manuals and documentation; without coolant tank and pumps – can be retrofitted if required; ideal for dry machining.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, Very well-maintained lathe with powered tools and a sub-spindle. Year of manufacture: 2004 Mazatrol 640T NEXUS control 500 mm between centers Maximum turning diameter: 380 mm Bjdpeyx U Itjfx Afgswu 2x hydraulic Kitagawa chucks Measuring arm Powered tools with VDI40 adapter (VDI tools are available at an additional cost) C-axis Sub-spindle Everything has been cleaned and is ready for use! Machine weight: approximately 5 tons Forklift available for loading the machine! Machine price: €31,950 excluding VAT (no tooling included) Machine + VDI40 toolholders (13 driven + 17 fixed): €38,500 excluding VAT This machine is available for inspection in Genk!