Used Morbidelli 504 for sale (45)

Condition: used, Year of construction: 1993, machine/vehicle number: AL1186, Used CNC milling machine, fully functional. The technical data sheet is attached in the listing. The machine Author 504 is a machining center with NC control, specifically developed for drilling and milling operations on wood and its derivatives. Lodpfjxay Ilox Ab Ujah

Condition: used, Bar Machining Center 3-Axis Lsdjwh A Hijpfx Ab Ueah

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: AA100001570, travel distance Z-axis: 180 mm, table width: 1,620 mm, table length: 5,510 mm, rapid traverse X-axis: 56 m/min, rapid traverse Y-axis: 56 m/min, TECHNICAL DETAILS Processing table dimensions (L x W): 5,510 x 1,620 mm Z-axis travel distance: 180 mm Maximum vectorial rapid traverse speed X/Y-axis: 56 m/min Spindle unit speed: 4,000 rpm Tool changer slots: 44 Connection diameter: 250 mm MACHINE DETAILS Dimensions & Weight Dimensions: 9,700 x 5,020 x 2,650 mm (LxWxH) Net weight: 5,000 kg Spindle unit motor power: 5.5 kW Air consumption: 4,430 m³/h Air velocity: 25 m/s Voltage: 400 V / 50 Hz EQUIPMENT PRO-Speed safety system TEPCAD control panel with touchscreen color display Linear tool changer TBR14 Linear tool changer FAST14 Air blower on the electrospindle XY-axis safety guard Vacuum pump 150/300 m³/h 5-axis unit ‘JQX’ version 13.5 kW Lsdpfx Aexmgr Rsb Ujah Fixed pedestal: 145 x 145 H=75 mm Rotatable gondola: 145 x 55 H=75 mm Clamp for 8 rails TV FLEX / TV FLEXDRIVE / TV FLEXMATIC MULTIGRIP 90 round clamp (H83) for TV FLEX / TV FLEXMATIC Maestro connect 1 year (including Gateway Kit plug & play) SCM DIGITAL SOLUTIONS: MAESTRO CONNECT MAESTRO ACTIVE software for human-machine interface (HMI) Maestro software for CNC programming Hardware key for Maestro CNC Advanced Maestro 3D module Additional key for Maestro CNC (USB connection) Windows 10 embedded 64-bit operating system Console with integrated PC eye-M PRO

Condition: used, Year of construction: 2023, Technical Data Working Area I.M.S. I.U. Working area X axis 5515 mm (217") Working area Y axis 1620 mm (63¾") Material passage Y 1900 mm (74¾") Material passage Z 250 mm (9¾") Workpiece length for pendulum processing 2600 + 2600 mm (102" + 102") Traverse speed of X-Y axes PRO-SPACE 56 m/min (184 ft/min); Traverse speed of X-Y axes PRO-SPEED 78 m/min (256 ft/min). *For further details, please refer to the corresponding machine layout. With the 5-axis motor, the Y working area increases to 1680 mm (66") for JQX motor, or 1720 mm (67½") for KS/KT motor. Max. loadable panel width during horizontal drilling, spindle oriented vertically only, with no middle reference stops. Installation Data I.M.S. I.U.: Installed power: 23 – 28.5 KVA Electrical specifications: 400 V, 50 Hz, 3 phases Air consumption: 450 Nl/min Compressed air consumption: 4500 m³/h (2650 CFM) Extraction air speed: 30 m/s Ledpfx Ajwb Trpjb Ueah Extraction port diameter: 250 mm (9.8") Noise level VSA* / LAV*: Drilling 72.2 dB(A) / 74.6 dB(A), Milling 74.3 dB(A) / 80.7 dB(A) Reference standard: EN ISO 11202:1995 *VSA = without load and without extraction *LAV = in operation, with extraction Location: Nattheim

Condition: used, machine/vehicle number: 005446, X axis working area: 3000 mm Y axis working area: 1300 mm Ljdpfx Aewuciqob Ueah Number of controlled axes: 3 axes Total number of drilling spindles: 112

Condition: used, Morbidelli line boring machine, price Ex Works. Lasdpfx Aboxp Hxce Ujh

Condition: used, Code: 0212 Brand: MORBIDELLI Model: AUTHOR 600 K - CE Standard Lajdpfjxnlmpjx Ab Ueh CNC working center with 3 controlled axis for furniture, custom furnishings, carpentry, panels, kitchens, and various - CE Standard Technical data: X-axis working range 3085 mm Y-axis working range 1385 mm Z-axis working range 180 mm Programmable X-axis speed 50 m/min Programmable Y-axis speed 45 m/min Programmable speed Z axis 22,5 m/min Drilling unit: 10 vertical spindles (6 in X direction - 5 in Y direction) - 2 horizontal spindles X axis - 2 horizontal spindles Y axis - Motor power 2,2 Kw - 4000 rpm Router unit: electric spindle 10 Hp - 18000 rpm - 10-spindle tool changer Engraving blade unit - motor 2,2 kW - - 6000 rpm Work surface: 6 work surfaces with 18 suction cups - 4 loading aids Vacuum pump 100 m³/h Automatic lubrication Xylog numerical control Installed power 17/20 Kw Compressed air 6/7 bar Weight 3000 kg

Condition: excellent (used), Machining centre Morbidelli Author 444 Laedpfx Aboxpumbe Ueh 4 axes 4400 x 1300 mm

Condition: new, Year of construction: 2024, Morbidelli M200 CNC CONTROLLED MACHINING CENTER - C.E. Safety instructions - Morbidelli m200 3715x1620 Z250 - Volt 400 EU - Frequency 50 Hz - PRO-SPACE safety devices - Plate passage Y 2200 mm - Retractable safety belts - "TECPAD wired" remote control with 7" touchscreen monitor - Tool changer TRB14 (version Y=1620) Ledpfx Abou Illmo Usah - Tool changer FAST14 - 1 vacuum pump, output 250/300 m³/h at 50/60 Hz - Central optimized suction nozzle on rear drilling head - Drilling unit with pneumatic vertical positioning (single Z-axis) - RO.AX F31LTC drilling unit - Suction hood for drilling unit - Drilling unit with inverter - Pressure booster - 5-axis unit "Prisma 5" version "KT" - Suction hood for 5-axis electrospindle - 7-position extraction hood for 5-axis electrospindle - Device for liquid cooling (air type) - 6 "TV FLEXMATIC" work tables 1600 - Conveyor belt for chip and remnant removal for X=3710mm - Removable chip collection container at the end of the machine frame - Sensor for reading the tool length - 4 devices for loading aid H=75 1600 - Front stops H=75 for 6 supports - 12 x fixed suction cups 145x145 H=75 mm - 6 x rotary suction cups 145x55 H=75 mm - Preparation for clamping cylinder for 6 supports TV FLEX / TV FLEXDRIVE / TV FLEXMATIC - Maestro connect: service contract for 1 year (kit gateway "plug&play" included) - SCM DIGITAL SOLUTIONS: MAESTRO CONNECT - Human-machine interface software (HMI) MAESTRO ACTIVE - Machine user interface software Maestro lab - Hardware key for Maestro - Additional hardware key for Maestro (for USB slot) - Mobile operating console "eye-M TOP" - TELESOLVE remote maintenance via the Internet - Mobile control unit with 6.5 m cable length - S-N-D 3-position selector switch - MACHINE LANGUAGE: German - incl. delivery, 3 days training in advance, 1 week installation and training - New machine is still in original packaging

Condition: used, Year of construction: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of the units and accessories (base) The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user an optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier in gantry design is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. The work unit is mounted on this mobile unit carrier on prismatic, ground guides and a recirculating ball slide. Axis movement: The drive system in the Y and Z axes is provided by ground ball screws of the highest precision class. The X-axis is driven by a backlash-free, preloaded precision rack and pinion drive. This ensures balanced load distribution during the positioning process. Such characteristics are important for ensuring balanced movement even in more complex tasks. The movement of the various axes is controlled by brushless three-phase servo motors/brushless AC motors. These offer excellent positioning speeds thanks to very short ramp times. Furthermore, the measuring system is fully integrated into these motors. These properties make this type of drive completely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum system (basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. negative pressure (connection) 0.9 bar Control / control cabinet · Office PC or industrial PC (see options) · Basic NC control: ESA-GV KVARA 6.0 · Cable remote control with the most important functions ELECTRIC/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC gives the NC control an unparalleled level of familiarity: the software runs on Windows XP and allows quick and easy programming, which is easy to learn even for inexperienced users. The system is open and allows the connection of CD-ROM drives, audio cards, barcode readers, modems, printers, scanning systems, etc. Furthermore, the installation of all network systems, as well as all commercially available CAD programs, is possible. To reduce space, the control cabinet is located under the machine table, and the operator works at a separate terminal on casters that can be freely positioned. XILOG PROGRAMMING SYSTEM Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available for languages I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral in the selected plane - Assisted programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to perform the same panel machining on different P Lodevvi Nzjpfx Ab Uoah

Condition: excellent (used), CATALOG NO. 6059 TECHNICAL DATA - Number of horizontal spindles: 2×20 pcs - Number of vertical spindles: 1×20 pcs - Distance between outer spindles: 610 mm - Spindle spacing: 32 mm - Feed cylinder stroke: 60 mm - Max. length of workpiece: 3,400 mm Lasdpsgq I I Ejfx Ab Uoh - Horizontal spindle adjustment: up/down, front/back - Vertical spindle adjustment: right/left - Each drilling unit can operate independently - Right/left drill bits, mounted on thread (screw-in) - 3 pneumatic clamps - Motor power: 4×1.85 kW - Air requirement: 6–8 bar - Dimensions L/W/H: 4600×1180×2200 mm - Weight approx. 1,500 kg Net price: 12,900 PLN Net price: 3,040 EUR depending on exchange rate, 4.25 EUR (Prices may vary with larger fluctuations)

Condition: good (used), functionality: fully functional, Manual control units for CNC woodworking Lodjxg Rmrjpfx Ab Ueah

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 3,680 mm, travel distance Y-axis: 1,260 mm, travel distance Z-axis: 150 mm, TECHNICAL DETAILS Working area: 3,680 x 1,260 x 150 mm Milling motor: 1 unit, 8.5 kW (11.5 HP) Lodpfxexg Izae Ab Uoah Tool changer: 1 automatic rotary magazine with 12 positions Drill beam: 18 vertical, 8 horizontal drills, and 1 "X" saw drill Software: DXF compatible Safety standard: BUMPER protection, CE standards Weight: 3,000 kg Note: The machine has a software issue and does not include a pump. The estimated cost for correction is approximately €3,000 each.

Condition: used, machine/vehicle number: 005449, undefinedPosition 2: CNC for Flexible Drilling MORBIDELLI-FLEXA 912+FLEXA 902 Ljdpfx Aswucl Ejb Usah Position 3: Automatic Dowelling Machine MORBIDELLI-FLEXA 912+FLEXA 902

Condition: used, Year of construction: 2001, Empty weight: 5.000 kg What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! Ljdpfx Abexbzg Ee Usah - Number of milling spindles [pcs.]: 1 - Number of controlled axes [pcs.]: 3 - Type milling table: Beam table - Drilling unit present: Yes - Horizontal drill spindles [pcs.]: 18 - Vertical drilling spindles [pcs.]: 6 - Tool changer positions [pcs.]: 14 - Year: 2001 - Documentation available: No - CE marking present: Yes - Serial number: AL/6222 - Voltage [V]: 400 - Current consumption [A]: 32 - Power [kW]: 26.0 - Transport weight [kg]: 5000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTIONAL TABLE - WORK CELL VERSIONX400 CELLDrilling and milling made for you!The numerically controlled machining center is equipped with a wide range of milling/drilling tools to meet every need in the processing of wood and similar materials.- More powerful, with drilling spindles with 8,000 rpm and . Technology, the toughest spindle available on the market, with over 1,000 maintenance-free hours of use. Better and more comprehensively equipped, with various configuration options thanks to the multifunctional table to optimally equip the machine according to your needs. Easier and more understandable programming thanks to the integrated MAESTRO CNC CAD-CAM module. Easier to use: the work table is accessible at all times, the electrical cabinet and vacuum pump are integrated, and in the PRO SPACE configuration there are no guards. Supporting structure. The supporting structure consists of a particularly strong monolithic steel base, heavily ribbed and very rigid. The particularly wide support was specifically designed to give the machine stability, ensuring consistent precision regardless of the working conditions and eliminating the need to anchor the machine to the floor. The base forms a large and solid support for the mobile column: the work unit is thus equipped with a balanced, stable, and durable support that can withstand the most extreme stresses, ensuring higher quality performance and greater precision. The mobile gantry consists of a single, solid unit anchored to the base on both sides and slides on pyrotechnic guides with top-quality ball-return slides. The dual motorization along the X-axis ensures top performance even under demanding working conditions. The movement of the lower moving unit (X-axis) and the working unit along the rod of the moving unit (Y-axis) is achieved thanks to a rack/pinion transmission with helical teeth. this creates a greater tooth-to-tooth thrust which achieves greater acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures absolute quality of finishes as any vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters; These ensure: - Reduced processing times thanks to improved acceleration - Better positioning accuracy thanks to the high-resolution encoder - Zeroing of setup operations when switching on the machine thanks to absolute encoders - Zeroing of general maintenance operations since there are no brushes with the "brushless" system The management of the axis displacement and, in general, of the machine's working elements is carried out by an industrial NS module with digital D Lodpovvi N Ijfx Ab Ujah

Condition: good (used), Year of construction: 2006, operating hours: 10,200 h, functionality: fully functional, On offer: A 5-axis machining center from Morbidelli with tooling! Manufacturer: Morbidelli (SCM Group) Model: X5 55 EVO Year of manufacture: 2006 Weight: 5,000 kg Operating hours: 10,200 Table length: 5,500 mm Max. workpiece width: 1,780 mm Y-axis working area - horizontal drilling: 1,780 mm Y-axis working area - horizontal drilling (front): 1,350 mm Y-axis working area - horizontal drilling (rear): 200 mm Passage height: 180 mm Z-axis travel: 180 mm Rapid traverse in X: 80 m/min Rapid traverse in Y: 80 m/min Rapid traverse in Z: 25 m/min Spindle drive: Power: 11 kW Max. speed: 20,000 rpm Tool holder: HSK-63F Tool magazine: 24 positions Tool magazine: 24 pieces Drilling head and units: Drilling head: Enlarged drilling unit carrier (Evo version) Units: Additional positions for units / tool attachments Control: Laodpfjxb E Dnjx Ab Uoh System: SCM Xilog Plus Evo distinctions: - Larger working area in Y (1,780 mm instead of 1,350 mm) - Larger unit carrier for increased flexibility

Condition: good (used), Year of construction: 2009, Used MORBIDELLI Universal TV 3012 CNC. - Year of manufacture: 2009 - Available September/October 2025 - Good condition Ledpfow Epqiox Ab Ueah

Condition: used, Complete high productivity flexible drilling line with automatic loading and unloading system General technical data: Panel width min 250 mm, max 3000 mm Panel depth min 100 mm, max 900 mm Panel thickness min 12 mm, max 60 mm Max weight per panel 50 kg Worktop height mm 1060 Linear speed of panel conveyor with inverter m/min 20 -95 With panels weighing more than 50 kg the speed must not exceed 50 m/min Production capacity of the line up to 25 pieces \ minute Technical data of numerical control and line management: Numerical Control TPA - Albatros - CNC 2000 EASYTOOL software for creating and modifying machine equipment. It allows you to define within a single file the arrangement of the tools mounted on each drilling machine. The files created by Easytool will be reworked from the machine plant optimizer in order to divide the workloads along the production line. Line composed of the following machines: * MAHROS brand double cell automatic loader, BRUSH model - with motorized pre-loading rollers * MARHOS brand panel turner * MORBIDELLI brand flexible drilling machine, POWERFLEX model - no. 5 split lower vertical drilling heads automatic flexible with NC control - with 26 independent spindles each drilling head - n. 3 drilling heads automatic flexible split upper vertical drilling with NC control - with 26 independent spindles each drilling head - n 2 horizontal drilling heads with split heads and 28 + 28 spindles (for each side) each independent (arranged on two levels) * MORBIDELLI brand flexible drilling machine, POWERFLEX model - no. 5 split lower vertical drilling heads automatic flexible with NC control - with 26 independent spindles each drilling head - n. 3 drilling heads automatic flexible split upper vertical drilling with NC control - with 26 independent spindles each drilling head - n 2 horizontal drilling heads with split heads and 28 + 28 spindles (for each side) each independent (arranged on two levels) * Automatic thorning machine brand MORBIDELLI * MARHOS brand panel turner * MAHROS brand double cell automatic unloader, model BRUSH - with motorised unloading rollers and system for the management of martyr panels Laodpfxsv N Hifs Ab Ueh

Condition: used, Year of construction: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of the units and accessories (base) The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user an optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier in gantry design is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. The work unit is mounted on this mobile unit carrier on prismatic, ground guides and a recirculating ball slide. Axis movement: The drive system in the Y and Z axes is provided by ground, high-precision recirculating ball screws. The X-axis is driven by a backlash-free, preloaded precision rack and pinion drive. This ensures balanced load distribution during the positioning process. This characteristic is important for ensuring balanced movement even in more complex tasks. The various axes are driven by brushless three-phase servo motors/brushless AC motors. These offer excellent positioning speeds thanks to very short ramp times. Furthermore, the measuring system is fully integrated into these motors. These properties make this type of drive completely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum system (basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. negative pressure (connection) 0.9 bar Control / control cabinet · Office PC or industrial PC (see options) · Basic NC control: ESA-GV KVARA 6.0 · Cable remote control with the most important functions ELECTRIC/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC gives the NC control an unparalleled level of familiarity: the software runs on Windows XP and allows quick and easy programming, which is easy to learn even for inexperienced users. The system is open and allows the connection of CD-ROM drives, audio cards, barcode readers, modems, printers, scanning systems, etc. Furthermore, the installation of all network systems, as well as all commercially available CAD programs, is possible. To reduce space, the control cabinet is located under the machine table, and the operator works at a separate terminal on casters, which can be freely positioned. XILOG PROGRAMMING SYSTEM Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available for languages I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral in the selected plane - Assisted programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to perform the same panel machining on different Lajdpfjvvi Rfjx Ab Ujh

Condition: used, Control managed by PC and Xilog Plus software Working area: 3,000 x 1,000 mm. Workable thickness: 60 mm. Upper drilling and milling group: * no. 1 electrospindle \ vertical pantograph * no. 24 independent vertical spindles * no. 2 independent horizontal spindles with double output for drilling on the “X” axis * no. 2 independent horizontal spindles with double output for drilling on the “Y” axis * no. 1 disc milling group in fixed “X” direction – 2.2 KW - Lower drilling and milling group: * no. 1 electrospindle \ vertical pantograph * no. 24 independent vertical spindles * no. 2 independent horizontal spindles with double output for drilling on the “X” axis * no. 2 Independent horizontal spindles with double output for drilling on the “Y” axis * No. 1 Disk milling unit in the fixed “X” direction – 2.2 KW No. 2 panel gripping clamps Manual piece loading on Flotex table Automatic piece unloading Automatic lubrication Protective nets CE regulations Ledpfx Abswa Nm Tj Usah

Condition: used, Year of construction: 2006, Working area X-Y-Z: 5300 x 1700 x 180 mm Travel length X-Y-Z: 6040 x 1810 x 280 mm Drilling head with 30 + 8 spindles Speed: 6000 rpm Power: 2.2 kW Automatic central lubrication Worktable TV with 10 supports L=1500 Laodoxnld Uepfx Ab Ush 4 working zones 2 cross lasers Vacuum pump 250 m³/h PC control Windows Vertical milling unit ISO 30 7.5 kW with tool changer RAPID 14 and vector axis Additional drilling unit (E-axis) Dongle for XILOG software Location: Nattheim

Condition: used, Year of construction: 2011, Basic machine Stk Volt 400 EU Stk #93.07.31 Series 800 TV working areas 5020x1905 Stk # 52.19.14 8 Matic supports (Y=1825 mm) with 3 basic modules Stk # 52.19.92 for automatic vacuum suction cups Additional basic module for automatic vacuum suction cups Matic Stk # 52.19.99 4 working areas H= 50 Stk # 52.21.63 Front and rear stops H=50- 8 traverse Stk # 52.24.11 Integrated additional stops H=50 mm for 8 traverse Stk # 52.24.15 Central double rail (removable) with 6 stops Stk # 52.24.18 H=50 mm suction cup TV 145 x 30 H50 Stk # 52.18.69 Suction cup TV 145 x 55 H50 Stk # 52.18.70 Suction cup TV 145 x 145 H50 Stk # 52.18.71 8 Posi-Aids H50 Stk # 52.21.66 Group 800 - Electrospindle Prisma K 11 kW Stk # 52.21.80 Drilling head F50L2 (38V-80X-40Y-L0/90°) Stk # 52.22.51 PBTC-On Pos.3 Electrospindle PB+Rapid 6 Stk # 52.21.96 Tool magazine Rapid 12 on board (X,Y-traveling) Stk # 52.22.90 Stk # 52.22.92 Vacuum pump with 250 (300) M3/H50(60) HZ Item # 52.21.97 Ledpfx Aboxnldhs Usah Storage Location: Supplier

Condition: used, Year of construction: 2016, MORBIDELLI AUTHOR M400 MAIN FEATURES 5-AXIS MACHINING UNIT "PRISMA: QUALITY AND PRODUCTIVITY AT THE HIGHEST LEVEL XILOG MAESTRO SOFTWARE: EXTREMELY SIMPLE MATIC PROGRAMMING" WORKTABLE: ONE POSITIONING FOR MULTIPLE MACHINING OPERATIONS TECHNICAL DATA AUTHOR M400 AXES Working area X-axis (inside stop) mm 3,680 Working area Y-axis (max. loadable piece on rear stops) mm 1,680 Workpiece passage Z / number of Z axes mm 170 / 1 Workpiece length with pendulum machining mm 1,650 Travel speed X-Y axes Pro-Speed m/min 85 Z-axis speed m/min 30 INSTALLATION Installed power KVA 62÷82 Compressed air requirement NL/min 400 Extraction air requirement m³/h 4,430 Extraction air speed m/s 25 Extraction nozzle diameter mm 250 GENERAL CHARACTERISTICS CNC-controlled drilling and milling center in gantry design and work table with workpiece supports, for carrying out: - vertical drilling on the panel surface - horizontal drilling on all four sides of the workpiece - groove milling with disc milling cutters - general milling work 3-4-5 axes MACHINE STRUCTURE The basic structure is a monolithic construction made of thick-walled steel. It is stiffened by welded reinforcements across the entire machine bed, making it extremely stable. The table shape used, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow with a minimum of space requirements. The mobile gantry support is made of a solid monoblock. It is positioned in the X direction on prismatic ground guides via recirculating ball slides. On this mobile unit carrier, the work unit is mounted on prismatic, ground guides and recirculating ball slides. All axes are moved on large-section prism linear guides and recirculating ball bearings with a large contact surface, ensuring optimal gliding even at the highest speeds and accelerations. Precise and rapid positioning of the movable gantry (X-axis) is achieved by a pinion and rack with helical teeth. Large-section recirculating ball screws ensure precise positioning of the work unit along the movable gantry (Y and Z axes). MOTORS, DRIVES AND INVERTERS Perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors, designed to achieve speeds of up to 90 m/min while ensuring the best finishing quality. CONTROL The control unit consists of a numerical control for milling and drilling machines with "Xilog Maestro" graphical user interface based on the Windows 7 Office operating system. 17-inch LCD color screen. QWERTY keyboard. Tilting control panel. Machine interface with Xilog Maestro software. Xilog Maestro Features Programming Parametric graphic programming Import of DXF files (2D; SPLINE, POLYLINE 3D geometries), linear or circular interpolation in three axes, linear in space, spiral in the selected plane. Programming with graphic and syntax aids for drilling and milling operations Automatic optimization of drilling operations and tool change cycles Possibility of Plate zero point shift for drilling on inclined or curved plate sides Lajdexnldbepfx Ab Uoh

Condition: used, Year of construction: 2011, X-Y working area: 4,422 x 1,753 mm X-Y travel: 4,955 x 1,918 mm Z-axis travel: Z = 400 mm 5-axis MORBIDELLI milling spindle C-axis rotation: 650° B-axis tilt: 290° (-10°) Power: 11 kW at 20,000 rpm, adjustable via inverter Liquid cooling HSK 63F interface Chip conveyor Automatic CNC central lubrication RAPID 24 tool changer (24 tool positions) Drill head extension with 30 + 6 spindles 8 positioning aids 2 cross lasers Vacuum pump 250 m³/h PC control with Windows Office Weight approx. 5,000 kg Storage location: Customer Laodew Sy R Espfx Ab Ujh