Used Injection Plastik for sale (1,823)

Condition: excellent (used), Battenfeld TM Xpress 350/2250 injection molding machine Control system: B6P Year of manufacture: 2014 Operating hours: 47,000 hours Nlsdpfxeziulwj Amyod We offer a Battenfeld TM Xpress 350/2250 injection molding machine in very good technical condition. The machine is regularly serviced, fully functional, and ready for immediate operation. Technical specifications Clamping unit Clamping force: 3500 kN (350 t) Platen dimensions: 1030 × 1140 mm Distance between columns: 710 × 710 mm Minimum mold height: 300 mm Maximum mold height: 710 mm Maximum opening: 1380 mm Centering ring diameter: 160 mm Ejector stroke: 200 mm Injection unit Screw diameter: 65 mm Injection volume: 1171 cm³ Injection shot weight (PS): 1078 g Maximum injection pressure: 2070 bar Maximum injection speed: 600 mm/s Equipment 4 × pneumatic valve 1 × hydraulic core Dimensions and weight Length: approx. 6.9 m Width: approx. 1.9 m Height: approx. 2.4 m Weight: approx. 13,000 kg

Condition: excellent (used), Year of construction: 2004, ENGEL DUO 11050/2300 Injection Molding Machine Manufacturer: ENGEL Model: DUO 11050/2300 Year of manufacture: 2004 Operating hours: 70,029 h Type: Hydraulic injection molding machine Category: Large-size injection molding machine Clamping force: 23,000 kN / 2300 tons Clamping Unit Clamping force: 23,000 kN Dimensions of mold mounting plates: 2900 x 2500 mm Distance between columns: 2000 x 1600 mm Minimum mold height: 700 mm Maximum mold height: 1890 mm Maximum opening width: 3800 mm Injection Unit Screw diameter: 135 mm Injection volume: 8870 cm3 Injection weight (PS): 8071 g Injection pressure: 1600 bar Additional equipment according to available data Number of hydraulic cores: 2 Number of mold heating zones: 36 Number of hydraulic cascades: 10 Magnetic platens Nsdpezkatcsfx Amysld Mold tilting option Screw replaced in 2011 Screw reinforced for special materials Machine without robot Dimensions and weight Weight of the main unit: 113 t Weight of the control cabinet / additional components: 18 t Approximate total weight: 131 t

Condition: excellent (used), Year of construction: 2006, Arburg 320 C 400-170 Injection Moulding Machine Year of manufacture: 2006 Clamping force: 40 t Screw diameter: 30 mm Distance between tie bars: 320 × 320 mm Maximum injection volume: 85 cm³ Maximum shot weight (PS): 77 g Injection pressure: 2000 bar Maximum screw speed: 400 rpm Nozzle stroke: 250 mm Nozzle contact force: 40.6 kN Nedpfx Amjxwu R Nsysld Heating power: 9.4 kW Pump drive power: 11 kW Total installed power: approx. 20.5 kW Machine length: approx. 3.4 m Machine width: approx. 1.4 m Machine height: approx. 2.0 m Machine weight: approx. 2,400 kg

Condition: excellent (used), Year of construction: 2006, Krauss Maffei KM 160–750 CX Injection Moulding Machine Year of manufacture: 2006 Fully hydraulic clamping system. MC5 control system with color monitor, integrated operator panel, and built-in USB ports. Plasticizing Unit 1 complete HPS-UN plasticizing unit for thermoplastics: Screw diameter: 50 mm Check valve, open nozzle Nozzle radius: 10 mm Nozzle opening: 4 mm Technical Data Clamping Unit Clamping force: 1,600 kN Mold opening force: 86.4 kN Movable platen force: - opening: 44.8 kN - closing: 37.8 kN Platen dimensions (H × V): 820 × 845 mm Tie bar spacing (H × V): 520 × 520 mm Mold opening stroke: 650 mm Mold height (min.): 300 mm Platen opening stroke: 950 mm Ejector stroke: 150 mm Ejector force: 22.6 / 9.9 kN Injection Unit Screw diameter: 50 mm Injection pressure: 1,892 bar Shot volume: 393 cm³ Shot weight (PS): 357 g Screw speed (standard/option): 390 / 490 rpm Electrical and Hydraulic Equipment Pump motor rated power: 22 kW Installed heater capacity: 10.97 kW Number of barrel heating zones: 5 Dry cycle rate (Euromap): 1,600 1/h Oil tank capacity: 489 l Nsdpfx Ajx Thzpomyeld Dimensions and Weight Net weight with control cabinet: 6.0 t Machine dimensions (L × W × H): 4.6 × 1.6 × 2.1 m

Condition: excellent (used), Year of construction: 2010, Injection Moulding Machine ENGEL DUO 5550/1100 Robot: ERC 200 Year of manufacture: 2010 Operating hours: approx. 79,000 h Clamping force: 1,100 tons Injection Unit – 5550 Screw diameter: 90 mm Injection pressure (specific): 2,180 bar Injection volume: 2,740 cm³ Screw L/D ratio: 22 Cylinder: type M3, bimetallic – increased wear and corrosion resistance Screw: type S4V, heat-treated, chrome-plated, with armoured edges – high wear and corrosion resistance Clamping Unit – DUO 1100 Clamping force: 1,100 tons Distance between tie bars: 1,400 x 1,150 mm Nsdpfxsw U Sz Ij Amyold Mould height: from 600 mm to 1,200 mm Ejector stroke: 300 mm Equipment Hydraulic cores: 2+1 Pneumatic cores: 1+1 GK heating zones: 3 x 8 = 24 zones Rotameters: 20 circuits Control system: CC 200 A02 Installed programs: - Micrograph Plus - Microplast - QDP - PD Graphics II Robot ERC 63/1-F, RC 200 X-axis: 1,300 mm Y-axis: 1,800 mm Z-axis: up to 2,840 mm C-axis: rotary movement 0–90° 2 vacuum circuits 1 pressure circuit for sprue removal

Condition: excellent (used), Year of construction: 2001, Injection moulding machine: Krauss Maffei KM 800-5000 MC Year of manufacture: 2001 Operating hours: 70,000 h Configuration: Machine with robot, safety cage and conveyor belt Availability: Two identical machines available Clamping unit: Clamping force: 8,000 kN Maximum mould opening force: 356 kN Moving platen opening force: 98 kN Moving platen closing force: 92 kN Mould platen dimensions (H x W): 1,610 mm x 1,530 mm Distance between tie bars (H x W): 1,120 mm x 1,000 mm Mould opening stroke: 1,400 mm Minimum mould height: 600 mm Maximum mould opening: 2,000 mm Hydraulic ejector stroke: 250 mm Injection unit: Screw diameter: 90 mm L/D ratio: 23 Injection pressure: 1,742 bar Injection volume: 2,863 cm³ Shot weight (PS): 2,605 g Dimensions and weight: Machine dimensions (LxWxH): 10.5 x 2.86 x 2.89 m Njdexqh I Iepfx Amysld Weight: 43 tonnes

Condition: excellent (used), Year of construction: 2011, Battenfeld HM 300/1330 Injection Moulding Machine Brand: Battenfeld Model: HM 300/1330 Year of manufacture: 2011 Category: Injection Moulding Machines The machine is in very good technical condition, fully operational, and ready for immediate use. Ideally suited for industrial production requiring high performance and reliability. Clamping Unit Clamping force: 3000 kN Platen dimensions (H × W): 1020 × 1030 mm Tie bar spacing (H × W): 710 × 610 mm Minimum / maximum mould height: 375 mm Maximum platen opening: 1150 mm Injection Unit Nlodpfxjxyqw Rs Amyod Screw diameter: 55 mm Injection volume: 653 cm³ Shot weight: 600 g Injection pressure: 2040 bar Dimensions and weight Length × width × height: 12.2 m The machine is available for inspection and testing under power. Photos and demonstration videos can be provided upon request. Loading and transport can be arranged.

Condition: excellent (used), Year of construction: 2011, Injection Moulding Machine Stork S+ 9000-12550 Control system: CDS700 Year of manufacture: 2011 The machine is in very good technical condition, fully operational and ready for immediate use in an industrial environment. Clamping Unit Clamping force: 9000 kN Platen dimensions (H × W): 1570 × 1560 mm Tie bar clearance (H × W): 1010 × 1010 mm Minimum / maximum mould height: 300 – 1190 mm Maximum opening stroke: 2290 mm Locating ring diameter: 250 mm Ejector stroke: 300 mm Injection Unit Screw diameter: 115 mm Injection volume: 6232 cm³ Shot weight (PS): 5733 g Injection pressure: 1740 bar Maximum injection speed: 300 mm/s Additional Equipment Pneumatic valves – 6 pcs Core – 1 pc Nledpjxyqyxjfx Amyjd The machine is available for inspection and testing under power. Photos and demonstration videos can be provided upon request. Loading and transport can be arranged.

Condition: excellent (used), Year of construction: 2007, Krauss Maffei Injection Moulding Machine KM 110–750 CX Year of manufacture: 2007 Fully hydraulic clamping system. MC5 control system with color monitor, integrated control panel, and 3 USB ports. Plasticizing Unit Complete plasticizing unit for thermoplastics Version with abrasion protection Screw diameter: 40 mm Non-return valve Nledpfxsx Avhye Amyjd Open nozzle TECHNICAL DATA Clamping Unit Clamping force: 1,100 kN Mold opening force: 70 kN Moving platen force: - Opening: 35.4 kN - Closing: 31.4 kN Platen dimensions (H × V): 745 × 770 mm Tie bar spacing (H × V): 470 × 470 mm Mold opening stroke: 600 mm Mold height (installation): 300 mm Platen opening travel: 900 mm Ejector stroke: 150 mm Ejector force: 22.6 / 9.9 kN Injection Unit Screw diameter: 40 mm Injection pressure: 2,500 bar Injection volume: 251 cm³ Shot weight (PS): 228.41 g Screw speed (standard/option): 295 / 355 rpm Electrical and Hydraulic Equipment Pump motor rated power: 22 kW Installed heater power: 15.62 kW Number of cylinder heating zones: 5 Dry cycle rate (Euromap): 2,000 cycles/h Oil tank capacity: 489 l Dimensions and Weight Net weight with control cabinet: 6.2 t Machine dimensions (L × W × H): 4.9 × 1.6 × 2.1 m

Condition: excellent (used), Year of construction: 2011, Krauss Maffei KM 420-3000 CX Injection Moulding Machine Year of manufacture: 2011 Control system: MC5 Clamping Unit: Clamping force: 4,200 kN Tie bar spacing (H x V): 900 x 800 mm Nlodpfx Ajydbbvjmyjd Platen dimensions (H x V): 1,400 x 1,250 mm Min. mould height: 780 mm Max. daylight between platens: 1,400 mm Ejector stroke: 250 mm Ejector force (forward/back): 95.4 / 48.6 kN Max. mould weight: 6,700 kg Injection Unit: Screw diameter: 80 mm Injection pressure: 1,856 bar Shot volume: 1,608 cm³ Shot weight (PS): 1,464 g Injection rate: 478 cm³/s Screw speed: 220 / 285 rpm Nozzle contact force: 129.4 kN Additional Equipment: 2 x hydraulic nozzle controls (GK) 2 x hydraulic core pulls – moving platen 1 x hydraulic core pull – fixed platen Masterbatch dosing unit control 14 GK zones Electrical and General Data: Pump motor power: 75 kW Installed heating power: 36 kW Power supply: 400 V / 50 Hz Oil volume: 1,075 l Machine weight: 23.7 t Dimensions (L x W x H): 7.3 x 2.6 x 2.5 m

Condition: excellent (used), Year of construction: 2012, Krauss Maffei Injection Moulding Machine KM 1300-12000 MX Manufacturer: KraussMaffei Model: KM 1300-12000 MX Year of manufacture: 2012 Nodoyrrwkspfx Amysld The machine is designed for thermoplastics processing and is equipped with a complete plasticizing unit in a version with abrasion protection. Technical specifications Clamping unit - Clamping force: 13,000 kN - Mold opening force: 910 kN - Dimensions of mounting platens: 2210 × 1910 mm - Tie bar spacing: 1570 × 1270 mm - Ejector stroke: 350 mm - Ejector force: 250 / 125 kN Injection unit - Screw diameter: 105 mm - Injection pressure: 2296 bar - Injection volume: 5195 cm³ - Shot weight for PS: 4728 g - Injection rate: 856 cm³/s Plasticizing parameters - Screw speed: 103 / 145 rpm - Plasticizing throughput (PS): • standard speed: 122 g/s • increased speed (option): 171 g/s Electro-hydraulic equipment - Rated pump motor power: 132 kW - Installed heater power: 71 kW - Number of barrel heating zones: 7 - Dry cycle time according to Euromap 6: 765 cycles/h - Oil tank capacity: 2440 l Dimensions and weight - Net weight with control cabinet: 70 tons - Installation dimensions: 13.03 × 3.65 × 2.82 m

Condition: excellent (used), Year of construction: 2008, DEMAG Injection Moulding Machine System 1500/1500-16000 Basic Data Manufacturer: DEMAG Model: System 1500/1500-16000 Year of manufacture: 2008 Clamping Unit Clamping force: 15,000 kN Dimensions of mounting plates (H × V): 2150 × 1880 mm Clearance between tie bars (H × V): 1500 × 1250 mm Minimum mould height: 700 mm Maximum mould height: 1400 mm Maximum opening stroke: 2900 mm Injection Unit Screw diameter: 145 mm Injection volume: 10,981 cm³ Injection weight (PS): 9,880 g Maximum injection pressure: 1454 bar Electrical and Hydraulic Equipment Rated pump motor power: 165 kW Heater power: 97 kW Machine Dimensions and Weight Net machine weight: 74 t Control cabinet weight: 21 t Total weight: approx. 95 t Dimensions (L × W × H): 14.4 × 3.4 × 2.9 m Service History / Repairs Nlodpfx Ameyugaljysd 2010 – new screw with RSP and barrel 2015 – new IBED 2015 – new wiring board 2017 – new motor and pump no. 2 2017 – new injection cylinder rod BS with seals 2017 – replacement of oil cooler circulation pump 2017 – replacement of TeachBox (robot) 2018 – replacement of pumps P1 + P3 (at 65,800 h) 2018 – hydraulic oil change Optional ESS (Energy Saving Systems) The machine can be equipped with a modern ESS servo drive system, which significantly improves energy efficiency in hydraulic plastic injection moulding machines. The system controls the operation of the hydraulic pump motor through a frequency inverter, which adjusts the motor speed to the machine’s actual demand during the production cycle. As a result, electricity is consumed only when it is truly needed. Main Benefits - Up to 30% reduction in energy consumption - Servo drive technology for hydraulic pumps - Global quality and proven technology used in the plastics processing industry - Reduced energy loss during machine idle time - Lower heating of the hydraulic system - Extended service life for the motor and hydraulic components - Option for installation in existing hydraulic injection moulding machines The ESS system allows significant reduction of machine operating costs while maintaining full production performance parameters.

Condition: excellent (used), Year of construction: 2004, Krauss Maffei Injection Moulding Machine KM 350–2700 C2+ 🔹 Basic Information Manufacturer: Krauss Maffei Model: KM 350–2700 C2+ Year of manufacture: 2004 Type: hydraulic injection moulding machine Control: MC4 (colour monitor, integrated control panel, disk drive station) 🔧 Clamping Unit Clamping force: 3500 kN (350 tons) Opening force: 220 kN Platen movement force: - Opening: 105 kN - Closing: 95 kN Nledpfx Asyv E Nvsmyod Platen dimensions: 1060 × 1095 mm Tie bar spacing: 710 × 710 mm Opening stroke: 920 mm Max. daylight: 1300 mm Min. mould height: 380 mm Ejector: - Stroke: 250 mm - Force: 95 / 48 kN 💉 Injection Unit Screw diameter: 80 mm Injection pressure: 1829 bar Shot volume: 1433 cm³ Shot weight (PS): 1304 g Screw speed: 218 / 284 rpm Injection rate: - 1508 cm³/s - 108 g/s (standard) - 141 g/s (option – increased speed) 👉 Plasticizing System: - Version for thermoplastics with abrasion protection - Check valve + open nozzle ⚡ Electro-Hydraulic System Pump motor power: 75 kW Heater power: 36 kW Number of heating zones: 7 Dry cycle time (Euromap): 1550 cycles/h Oil tank capacity: 720 l 👉 The machine is an excellent candidate for ESS retrofitting (energy savings of up to 30–60%) 📐 Dimensions and Weight Weight: 16.7 t Dimensions (L × W × H): 6.91 × 2.04 × 2.41 m

Condition: excellent (used), Year of construction: 2011, Machine: ENGEL DUO 5550/650 pico Control unit: CC200 Year of manufacture: 2011 Operating hours: 61,606 h Robot: Viper 40 1. Clamping Unit Clamping force: 6,500 kN Clearance between tie bars (H × V): 1,100 × 960 mm Platen dimensions (H × V): 1,510 × 1,440 mm Mould height (min./max.): 650 / 1,150 mm Mould opening stroke: 1,400 mm Maximum platen distance: 2,050 mm Maximum mould weight: 11,000 kg Ejector force: 95 kN Ejector stroke: 250 mm Tie bar diameter: 175 mm 2. Injection Unit (Aggregate 5550) Screw diameter: 90 mm (reinforced for up to 30% fiber content) Maximum injection volume: 2,740 cm³ Maximum shot weight (PS): 2,520 g Injection pressure (max./boost): 2,180 bar Injection pressure (standard): 1,910 bar Nedpfx Ajyw Aa Uemyjld Screw L/D ratio: 20 Screw stroke: 430 mm Maximum screw speed: 148 rpm Plasticising rate: 77 g/s Nozzle contact force: 150 kN 3. Drive and Power Supply Installed drive power: 90 kW Barrel heaters power: 56 kW Number of heating zones: 6 Hydraulic oil tank capacity: 1,000 l 4. Special Equipment and Hydraulics Core pull circuits: - 6 hydraulic circuits on the moving platen - 2 hydraulic circuits on the fixed platen Cascade valves: 4 units (installed on the fixed platen) 5. General Description Two-platen machine (DUO series) designed for large-scale plastic part production. The design ensures: - High rigidity of the clamping system - Capability for operation with heavy moulds and large opening strokes Additional information: - Screw reinforced for operation with up to 30% fiber content - All hydraulic hoses replaced in Q4 2024 - Machine condition: excellent, ready for production Availability: Immediately available, professionally maintained, and ready for instant operation.

Condition: good (used), Year of construction: 2011, Krauss Maffei KM 850-12000 MX injection molding machine With Krauss Maffei robot Year of manufacture - 2011 Hydraulic-mechanical double-plate clamping system with 4 pressure pads and 4 locking units on the moving plate. PV - adjustment of the injection unit. MC 5 control system with color monitor, integrated control panel and USB data storage. Plasticizing system Complete plasticizing system for thermoplastics with a screw diameter of 135 mm, with reverse lock and open nozzle. Nozzle radius 25 mm, nozzle opening 9 mm TECHNICAL DATA Closing unit - mold closing force: kN 8500 - mold opening force: kN 560 - clamping plate dimensions (h x v): mm 1600 x 1600 Njdpfx Amotrya Rsysld - clearance between columns (h x v): mm 1140 x 1140 - mold opening path: mm 1600 - mold height (min-max.): mm 500 - 1100 - opening width: mm 2100 - ejector stroke: mm 300 - ejector force: kN 200/ 100 Injection unit - screw diameter: mm 135 - injection pressure: bar 1389 - injection volume: cm3 8588 - injection size for PS: g 6098 - injection capacity: cm3/s 1414 Electro-hydraulic equipment - rated power of pump motor: kW 132 - dry cycle time according to Euromap 6: 1/h 965 - oil tank capacity: l 2440 Weight and dimensions - net weight with control cabinet: t 49 - dimensions of foundation space (L x W x H): m 11.72 x 2.92 x 2.71

Condition: good (used), Year of construction: 2001, Battenfeld TM 4500/2800 injection molding machine Year of production: 2001 Control: Unilog B4 4 identical machines available Closing system: Closing force: 4500 kN Minimum mold height: 425 mm Maximum mold height: 770 mm Column spacing: 800 x 800 mm Mounting plate dimensions: 1155 x 1195 mm Mould opening stroke: 760 mm Injection unit: Screw diameter: 75 mm Shot weight (PS): 1506 g Injection volume: 1657 cm³ Specific injection pressure: 1739 bar Nljdpfx Aevn Sa Tomyjd Robot interface: Euromap 12 Machine dimensions: 8.3 x 1.9 x 2.4 m Weight: 20400 kg Oil tank capacity: 800 liters

Condition: like new (used), Plasticizing system Krauss Maffei CX machine screw diameter 50 mm injection volume -432 ccm injection weight -393 g practically new - used for testing in the tool shop Nsdpfxsv R Ucpe Amyeld

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, DEMAG System 1500/1500-16000 Injection Moulding Machine Year of manufacture: 2008 We offer for sale a high-quality injection moulding machine from the German brand Demag, model System 1500/1500-16000, equipped with a robot and additional equipment. The machine is in very good technical condition, regularly serviced, complete, and ready for operation. TECHNICAL DATA Clamping unit: Clamping force: 15,000 kN Mounting platen dimensions (W x H): 2,150 x 1,880 mm Clearance between tie-bars (W x H): 1,500 x 1,250 mm Minimum / maximum mould height: 700 – 1,400 mm Maximum opening stroke: 2,900 mm Injection unit: Screw diameter: 145 mm Injection volume: 10,981 cm³ Shot weight (for PS): 9,880 g Injection pressure: 1,454 bar Nledpfx Ajww Idlemysd Electrical-hydraulic system: Hydraulic motor power: 165 kW Heater power: 97 kW Dimensions and weight: Machine weight with control cabinet: 74,000 kg / 21,000 kg Overall dimensions (L x W x H): 14.4 m x 3.4 m x 2.9 m Additional equipment: Wittmann W 753 robot – year of manufacture: 2008 Safety enclosure Conveyor belt (product conveying) The machine is ideal for processing large technical mouldings. Perfect for serial production, with the possibility of full automation thanks to the installed robot and part removal system.

Condition: excellent (used), Year of construction: 2008, Krauss Maffei Injection Moulding Machine KM 300-1000 CX Year of manufacture: 2008 Manufacturer: Krauss Maffei Control system: MC 5 with colour monitor, integrated control panel, and disk drive station Clamping system: fully hydraulic Plasticising unit SP 1000 Screw diameter: 50 mm Non-return valve, open nozzle Nozzle radius: 15 mm, bore: 3 mm Clamping unit Clamping force: 3000 kN Opening force: 169 kN Platen dimensions (H × V): 995 × 1050 mm Tie bar spacing: 630 × 630 mm Mould opening stroke: 820 mm Minimum mould height: 330 mm Maximum daylight (max. mould open width): 1150 mm Ejector stroke: 200 mm Ejector force (forward/backward): 58 / 28 kN Injection unit Screw diameter: 50 mm Njdpfxow U Rcds Amyjld L/D ratio: 22.0 Injection pressure: 2304 bar Injection volume: 432 cm³ Shot weight (PS): 393 g Injection speed: 170 mm/s Injection flow rate: 334 cm³/s Screw speed (standard): 370 rpm Plasticising rate (at standard screw speed): 54.3 g/s Electro-hydraulic equipment Pump motor power: 45 kW Heater capacity: 18.7 kW Number of heating zones: 5 Dry cycle time / stroke per Euromap 6: 2.8 s / 441 mm Oil tank capacity: 720 l Dimensions and weight Net weight (including control cabinet): 12.5 t Dimensions (L × W × H): 6.11 × 2.17 × 2.25 m

Condition: excellent (used), Year of construction: 2018, Injection Moulding Machine KRAUSS MAFFEI KM 420-2000 CX Basic Data Manufacturer: Krauss Maffei Model: KM 420-2000 CX Machine Number: 61030600 Year of Manufacture: 2018 Control System: MC6 Control Panel: Colour monitor integrated with operator console The machine is equipped with a fully hydraulic clamping system and the advanced MC6 control system. Plasticizing Unit Nsdjyugkwopfx Amyold Complete plasticizing unit designed for thermoplastics processing. High-performance screw: HPS-UN Screw diameter: 60 mm Non-return valve: Yes Nozzle type: Open Nozzle radius: 15 mm Nozzle orifice: 6 mm Injection unit: SP 2000 Clamping Unit Clamping force: 4200 kN Mould opening force: 250 kN Platen size (H x V): 1270 × 1230 mm Tie bar clearance (H x V): 800 × 800 mm Max mould opening stroke: 1020 mm Min mould height: 580 mm Max platen opening stroke: 1600 mm Ejector stroke: 250 mm Ejector force (forward/backward): 95 / 49 kN Injection Unit Screw diameter: 60 mm L/D ratio: 23.3 Injection pressure: 2420 bar Injection volume: 792 cm³ Shot weight (PS): 720 g Injection speed: 130 mm/s Injection flow rate: 368 cm³/s Screw rotation speed: 285 rpm Plasticizing rate: 72.2 g/s Nozzle contact force: 82 kN Electrical & Hydraulic Equipment Nominal pump motor power: 75 kW Installed heater capacity: 29 kW Number of cylinder heating zones: 6 (+1 extended nozzle) Dry cycle time (EUROMAP 6): 3.0 s / 560 mm Required hydraulic oil volume: 1000 l Dimensions & Weight Net weight (incl. control cabinet): 21.5 t Machine dimensions (L × W × H): 6.90 × 2.49 × 2.38 m Max mould weight: 6700 kg Optional Energy Saving System ESS (Energy Saving Systems) The machine can be equipped with an ESS servo drive system, which increases the energy efficiency of hydraulic injection moulding machines. The system controls the operation of the hydraulic pump motor via a frequency converter, adjusting the motor speed to the actual demand during the production cycle. Key Benefits: - Reduction of electricity consumption by up to 30% - Servo drive technology for the hydraulic pump - World-class, proven industrial technology - Reduction of energy losses during idle runs - Lower heating of hydraulic system - Extended life of hydraulic components - Can be retrofitted to existing hydraulic injection moulding machines

Condition: excellent (used), Year of construction: 2004, Krauss Maffei KM 350–2700 C2+ injection molding machine Year of manufacture: 2004 Control system: MC4 Technical data Clamping unit * Clamping force: 3500 kN (350 tons) * Platen dimensions: 1060 × 1095 mm * Tie bar spacing: 710 × 710 mm * Opening stroke: 920 mm * Maximum opening: 1300 mm * Minimum mold height: 380 mm * Ejector stroke: 250 mm * Ejector force: 95 / 48 kN Injection unit * Screw diameter: 80 mm * Injection pressure: 1829 bar * Injection volume: 1433 cm³ * Injection shot weight (PS): 1304 g * Screw speed: 218 / 284 rpm * Maximum injection capacity: 1508 cm³/s Plasticizing system * Version for thermoplastic materials * Abrasion protection * Check valve * Open nozzle Drive system * Pump motor power: 75 kW Nodpfx Ajzkadbjmyold * Heater power: 36 kW * Number of heating zones: 7 * Oil tank capacity: 720 l * Dry cycle time (Euromap): 1550 cycles/h Dimensions and weight * Dimensions (L × W × H): 6910 × 2040 × 2410 mm * Machine weight: 16.7 t Additional information * MC4 control system with color monitor * Machine prepared for modernization with the ESS system (energy saving of 30–60%)

Condition: excellent (used), Year of construction: 2008, Krauss Maffei KM 1100–12000 MX injection molding machine Year of manufacture: 2008 Robot: Wittmann Control: MC5 Equipment Fully hydraulic clamping unit MC5 control with color monitor Integrated operator panel 3 USB ports Plasticizing unit for thermoplastic materials Screw Ø 120 mm with abrasion protection Check valve Open nozzle Clamping unit Clamping force: 11,000 kN Opening force: 770 kN Platen dimensions: 2210 × 1910 mm Distance between columns: 1550 × 1250 mm Opening stroke: 2000 mm Minimum mold height: 600 mm Maximum mold height: 1200 mm Maximum opening: 2600 mm Nodpfxszkanys Amyeld Ejector stroke: 300 mm Ejector force: 220 / 110 kN Injection unit Screw diameter: 120 mm Injection pressure: 1758 bar Injection volume: 6786 cm³ Injection weight (PS): 6175 g Screw speed: 103 / 145 rpm Injection rate: 1118 cm³/s Injection rate with accumulator: 1696 cm³/s Plasticizing unit Designed for processing thermoplastic materials Version with abrasion protection Check valve Open nozzle Electro-hydraulic system Pump motor power: 132 kW Heater power: 82 kW Number of heating zones: 7 Number of dry cycles (Euromap): 802 cycles/h Oil tank capacity: 2440 l Dimensions and weight Dimensions (L × W × H): 12.47 × 3.65 × 2.82 m Weight: 73 t

Condition: excellent (used), Year of construction: 2011, Krauss Maffei KM 50 - 100 AX injection molding machine Electric injection molding machine Year of production - 2011 Working hours 47799 Operator language: German, Romanian, Czech Closing unit - Mold closing force: kN 500 - Mold opening force: kN 39.9 - Dimensions of the mounting plate (hxv): mm 510 X 460 - Distance between columns (hxv): mm 410 X 360 Injection unit - Screw diameter: mm 25 - Injection pressure: bar 2025 Njdpjv Hxgqefx Amyeld - Injection volume: cm3 49 - Injection weight for PS: g 45 Dimensions and weight - Net weight with control cabinet: t 3.9 - Machine dimensions (length x width x height): m 4.13 x 1.6 x 1.8

Condition: excellent (used), Year of construction: 2012, Krauss Maffei KM 160–1000 CX Injection Moulding Machine 🔹 Basic Information Manufacturer: Krauss Maffei Model: KM 160–1000 CX Year of Manufacture: 2012 Operating Hours: 57,654 hours Category: Hydraulic Injection Moulding Machine 🔧 Clamping Unit Clamping Force: 1,600 kN (160 tons) Platen Dimensions: 820 × 845 mm Tie-bar Distance: 520 × 520 mm Minimum Mold Height: 300 mm Maximum Opening Stroke: 950 mm 💉 Injection Unit Screw Diameter: 50 mm Injection Volume: 432 cm³ Shot Weight: 393 g Injection Pressure: 2,304 bar ⚡ Electro-hydraulic System Pump Motor Power: 37 kW Heater Power: 18.7 kW 👉 Option to install Energy Saving System (ESS) – actual energy consumption reduction by up to 30–60% 📐 Dimensions & Weight Machine Weight: 9 tons Nlodpfjyv E E Djx Amysd Dimensions (L × W × H): 5.54 × 2.06 × 2.18 m

Condition: excellent (used), Year of construction: 2011, ENGEL DUO 5550/650 pico injection molding machine ENGEL robot Control system: CC200 Year of manufacture: 2011 Operating hours: 61,606 h Technical data Clamping unit Clamping force: 6500 kN (650 tons) Distance between columns (H × V): 1100 × 960 mm Platen dimensions (H × V): 1510 × 1440 mm Mold height (min./max.): 650 / 1150 mm Mold opening stroke: 1400 mm Maximum distance between platens: 2050 mm Maximum mold weight: 11,000 kg Ejector force: 95 kN Ejector stroke: 250 mm Column diameter: 175 mm Injection unit Screw diameter: 90 mm Maximum injection volume: 2740 cm³ Maximum injection weight (PS): 2520 g Maximum injection pressure: 2180 bar Standard injection pressure: 1910 bar Screw L/D ratio: 20:1 Screw stroke: 430 mm Nlsdoywrtwepfx Amyjd Maximum screw speed: 148 rpm Plastication rate: 77 g/s Nozzle clamping force: 150 kN Drive and power supply Drive power: 90 kW Cylinder heater power: 56 kW Number of heating zones: 6 Hydraulic oil tank capacity: 1000 l Hydraulic equipment 6 hydraulic circuits on the moving platen 2 hydraulic circuits on the stationary platen 4 cascade valves on the stationary platen ENGEL robot ENGEL linear robot Integrated with the machine control system Designed for automatic part removal Robot control from the CC200 system Synchronization of robot operation with the injection molding machine cycle