Used Injection Plastik for sale (1,886)

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, KM 500-3500 C2 Year of manufacture: 2007 Operating hours in automatic mode: 60,000 h Clamping unit Clamping force: 5,000 kN Mounting plate dimensions: 1270 x 1310 mm Distance between tie bars: 900 x 800 mm Min./max. mold height: min. 480 mm Maximum opening stroke: 1,650 mm Injection unit Screw diameter: 80 mm Injection volume: 1,543 cm³ Shot weight: 1,404 g Injection pressure: 2,205 bar Electrical and hydraulic equipment Nominal pump motor power: 90 kW Heating capacity: 44 kW Dimensions and weight Rbsdpfx Ahox Uqadezst Net weight with control cabinet: 27,090 kg Dimensions (L x W x H): 7.65 m x 2.55 m x 2.55 m

Condition: new, Engel bimetallic screw cylinder, new and unused Diameter: 105 mm LD 22 Unit 4550: 3380 cm3 Unit 5550: 3700 cm3 Rsdpfx Ahox Up U Tszsbt

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Technical Data Year of manufacture: 2006 Redpfxjx Up Utj Ahzebt Clamping Unit Clamping force: 8000 kN Max. platen size: 1520 mm Clear tie-bar distance: 1170 mm Min. mold height: 700 mm Max. mold height: 1300 mm Max. platen opening: 2300 mm Max. opening stroke/mold height: 1000 mm Ejector stroke: 300 mm 1st Injection Unit Screw diameter: 105 mm Shot volume: 4160 ccm 2nd Injection Unit Screw diameter: 90 mm Shot volume: 3050 ccm

Condition: excellent (used), Year of construction: 2004, Engel ES 3550/600 HL Rbodpfx Ahjx Up Umszot Technical Data Year of manufacture: 2004 Clamping Unit: Clamping force: 6000 kN Platen size (W x H): 1480 x 1300 mm Minimum mould height: 500 mm Maximum mould height: 1700 mm Opening stroke: 1200 mm Ejector stroke: 250 mm Ejector force: 110 kN Injection Unit: Screw diameter: 80 mm Shot volume: 1960 ccm Specific injection pressure: 1730 bar Screw length: 22 l/d Dosing stroke: 390 mm Number of heating zones: 6 Nozzle stroke: 700 mm

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Technical Data Year of manufacture: 2007 Clamping Side Clamping force: 13,000 kN Max. opening stroke/installation height: 2,300 mm Max. distance between mounting plates: 4,000 mm Rjdox Up T Aepfx Ahzebt Min./max. mold installation height: 1,000 - 1,700 mm Max. platen height: 1,910 mm Min. mold size: 1,020 x 820 mm Clear tie bar spacing: 1,500 mm Nozzle radius: R40 mm Mold weight: 29,000 kg Ejector stroke: 350 mm 1st Injection Side Screw diameter: 120 mm Shot volume: 6,786 ccm 2nd Injection Side Screw diameter: 105 mm Shot volume: 5,195 ccm NC5 Control Core pulls AWS/DS: 1/1

Condition: excellent (used), Year of construction: 2007, Engel Duo 11000H/7000H/1300 Year of manufacture: 2007 Technical Data Clamping Unit Clamping force: 13,000 kN Opening stroke: 3,000 mm Min. mould installation height: 1,000 mm Max. mould installation height: 1,800 mm Max. daylight between platens: 4,000 mm Mounting platen size: 2,200 x 1,990 mm Clear tie bar spacing: 1,530 x 1,275 mm Injection Unit 1 Screw diameter: 120 mm Dosing stroke: 570 mm Max. shot volume: 6,450 cm³ L/D screw ratio: 20 Specific injection pressure: 1,794 bar Redpfx Asx Up Rnohzsbt Nozzle stroke: 1,000 mm Number of heating zones: 6 Injection Unit 2 Screw diameter: 120 mm Dosing stroke: 4,800 mm Max. shot volume: 5,430 cm³ Specific injection pressure: 1,370 bar Nozzle stroke: 1,000 mm

Condition: excellent (used), Year of construction: 2003, operating hours: 67,092 h, BATTENFELD HM 10000-9200 Rsdpfex Up Rhex Ahzjbt Manufacturer: BATTENFELD Model: HM 10000-9200 Control system: UNILOG B4 Year of manufacture: 2003 Operating hours: 67,092 h Technical data – Clamping unit Clamping force: 10,000 kN Tie bar spacing (h x v): 1120 x 1400 mm Platen size (h x v): 1960 x 1690 mm Minimum mold height: 550 mm Maximum mold height: 1,020 mm Maximum daylight: 2,120 mm Opening stroke: 1,100 mm Ejector stroke: 300 mm Ejector force: 118 kN Movable platen centering diameter: 250 mm Fixed platen centering diameter: 315 mm Technical data – Injection unit Screw diameter: 120 mm Shot volume: 5,655 cm³ Injection pressure: 1,632 bar Screw length: 22 L/D Screw stroke: 500 mm Screw speed: 130 min⁻¹ Screw torque: 11,370 Nm Plasticizing rate: 144 g/s PS Free discharge plasticizing rate: 1,144 g/s PS Number of heating zones: 8 Nozzle stroke: 700 mm Dimensions & Weight Machine dimensions (L x W x H): 11.6 m x 2.9 m x 2.5 m Total weight: 76,500 kg Equipment Display language: German CompactFlash drive 4x hydraulic core pulls Leveling elements EUROMAP 12 interface Interface for temperature control unit Enlarged oil cooler 16x mold heating circuits

Condition: used, Year of construction: 2021, operating hours: 5,048 h, functionality: fully functional, machine/vehicle number: 245467, ENGEL DUO 17060/2000 injection moulding machine with ENGEL Viper 60 robot (robot working area, conveyor belt) – year 2021 For sale: ENGEL DUO 17060/2000 injection moulding machine, year of manufacture 2021, in excellent technical condition. The machine has been regularly serviced and operated in stable production conditions. Technical data and information: - Manufacturer: ENGEL - Model: DUO 17060/2000 - Clamping force: 2000T - Year of manufacture: 2021 - Operating hours: 5048 h - Type: two-platen injection moulding machine - Condition: very good, fully functional Additional equipment: - ENGEL Viper 60 robot – perfectly matched to the machine, ready for direct integration into a production line, robot working area, conveyor belt. Offer advantages: - Low number of operating hours - Modern, energy-efficient design - High process repeatability and precision Rsdjycc N Sjpfx Ahzobt - Complete package: injection moulding machine + robot, robot working area, conveyor belt Ready for immediate commissioning

Condition: excellent (used), Year of construction: 2012, operating hours: 25,000 h, functionality: fully functional, clamping force: 8,500 kN, screw diameter: 95 mm, displacement volume: 3,367 cm³, Clamping force 8500 kN Mould opening force, max. 560 kN Travel force movable platen opening 89 kN Travel force movable platen closing 92 kN Size of mould platens (h x v) 1600 x 1600 mm Distance between tie bars (h x v) 1140 x 1140 mm Mould opening stroke 1600 mm Mould height min/max 500/1100 mm Max. daylight 2100 mm Hydraulic ejector - stroke 300 mm Ejector force 200/100 kN Injection unit: Screw diameter 95 mm Ls/D ratio 23 Injection pressure 1795 bar Stroke volume 3367 ccm Shot weight (PS) 3064 gr. Injection rate 690 ccm/s Screw speed 116 1/min Plasticising rate max. 104 g/s Nozzle pressure 166 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 53 kW Adjustable barrel heating zones 7 Oil Reservoir capacity 1500 ltr. Dimensions and weights: Dimensions of the machine ca. 11,00 x 3,00 x 2,60 m Total machine weight 43000 kg Max. mould weight 12200 kg Accessories: - Anti vibration pads Additional Options: Rbsdpfoyb Sx Hex Ahzot - 1 x Air valve - 4 x hydr. core pulls - 12 x hydr. sequentional valves - 2 x 12 folds water flow regulator - Robot interface according to Euromap 67

Condition: reconditioned (used), clamping force: 500 kN, screw diameter: 38 mm, injection pressure: 1,341 bar, Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 50M injection moulding machine. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Rbodewfp Hkspfx Ahzst Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Condition: refurbished (used), operating hours: 22,000 h, In our stock in Wellingborough, Northamptonshire is this fully refurbished Arburg 420C 1000 – 250 VU injection moulding machine with vertical clamp and injection. Ideal for insert moulding as an operator can easily and ergonomically load inserts. The vertical clamp means inserts are more likely to stay in place. This machine has a 30mm plasticising unit which gives a maximum shot weight of 89 (PS) (g). As you’d expect from us, this machine has been fully refurbished and is now completely fault & leak free. With low lifetime hours of only 23k, it really is in excellent condition throughout. The plasticising unit is holding max pressure throughout the range, the pump is quiet, the platens are in great order and we’ve done great work with the general cosmetics. Machine is now available for a full demonstration as and when required. Rsdpfxsl Tnz Eo Ahzjbt Refurbished machines undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free with a 3 month (parts only) warranty. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we'll do the rest.

Condition: good (used), Year of construction: 2003, operating hours: 55,933 h, functionality: fully functional, machine/vehicle number: 26195, clamping force: 350 kN, screw diameter: 25 mm, clearance between the columns: 270 mm, displacement volume: 42 cm³, injection pressure: 175 bar, injection weight: 50 g, We are selling a Battenfeld 350 plus/75 plastic injection molding machine, year 2003. The pump has been replaced. The machine has 58,500 operating hours, works flawlessly, and is in regular operation. Rbjdpfx Ahsya Ev Aozst Clamping force: 35 T, shot weight: 50 g.

Condition: excellent (used), Year of construction: 2008, operating hours: 49,429 h, functionality: fully functional, machine/vehicle number: 208050, clamping force: 1,000 kN, screw diameter: 35 mm, clearance between the columns: 420 mm, displacement volume: 137 cm³, injection pressure: 2,000 bar, injection weight: 140 g, mold height (min.): 250 mm, ejector force: 25 N, ejector stroke: 150 mm, number of injections: 1, type of input current: three-phase, We are selling an ARBURG 420 C GOLD EDITION injection molding machine, manufactured in 2008. Redpjya Egusfx Ahzsbt The machine has newly re-sealed clamping and injection units, operates perfectly and is in regular production use. Clamping force: 100 t Shot weight: 140 g Screw diameter: Ø35 mm The machine is equipped with: -connection for 3 hot runner nozzles -EUROMAP 67 interface -connection for a color dosing unit -connection for air blow / conveyor belt control The machine is sold without a robot. MATEJ LORENCI: +386-31-589-330

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 800 h, functionality: fully functional, clamping force: 1,250 kN, ejector force: 125,000 N, All CNC FANUC Roboshot machines are FULLY ELECTRIC Demo FANUC Roboshot S100iB 2024 The machine was used at trade fairs as a demo unit and is practically new. Clamping force: 125 tons Screw diameter: according to customer requirements All additional equipment can be configured according to customer needs and can be upgraded for specific application requirements. Additional optional equipment: - FIBER sorting flap (for separation of good and defective parts) - Hot runner controller (integrated and connected to the machine) - V-gate - Additional electrical sockets - Electrical quick coupling for fast mould change - Water piping system Redpfx Aoya D I Djhzjbt - Mouldflo system for digital monitoring of water flow, temperature, and pressure - Machine elevation by 100 mm - Hydraulic power unit for side cores (2CH / 4CH) - Robot (Cartesian or 6-axis FANUC Robot) - ..... This machine is available for Slovenia, Croatia, Bosnia and Herzegovina, and Serbia.

Condition: excellent (used), Year of construction: 2007, clamping force: 1,500 kN, screw diameter: 45 mm, displacement volume: 305 cm³, injection pressure: 2,050 bar, injection weight: 270 g, mold height (min.): 275 mm, Demag IntElect 150/520-610 General Information Year of manufacture: 2007 Weight: 6,900 kg Dimensions (L × W × H): 5.5 × 1.5 × 2.1 (2.3) m Control system: NC4 Operating hours: 26,500 h Clamping Unit Clamping system: 150/... Clamping force: 150 t Platen dimensions (H × V): 770 × 770 mm Tie bar clearance (H × V): 520 × 520 mm Mould height (min.–max.): 275 mm (max. increased) Max. distance between platens: 1180 mm Ejector stroke: 125 mm Ejector force: 35 kN Injection Unit Rbodpfx Ahjxxrr Tszjt Injection unit type: …/610 Screw diameter: 45 mm L/D ratio: 20 Injection volume: 305 cm³ Shot weight: 270 g Specific injection pressure: 2050 bar Wear-resistant screw; bimetallic barrel, standard L:D Three-piece ring-type non-return valve (RSP) Increased injection speed: 300 mm/s Additional Equipment Hour counter reading: 26,500 h - Increased mould mounting height (min. unchanged, max. extended) - Wear-resistant screw; bimetallic barrel; standard L:D; screw diameter 45 mm - Three-piece ring-type non-return valve (RSP) - Electro-hydraulic interface for connecting 2 hydraulic cores on the moving mould plate, via a separate hydraulic unit - Increased injection speed (300 mm/s) - Increased mould mounting height (min. unchanged, max. extended) Offer for the injection moulding machine only

Condition: used, Year of construction: 2021, For sale: 10L jerrycan blow mold + AdBlue spout mold (2-cavity) For sale: industrial blow molds (extrusion blow molding), suitable for the production of plastic containers and accessories. The lot includes: 1) 10-litre jerrycan blow mold Industrial blow mold designed for the manufacture of 10L plastic jerrycans. The mold is complete, in very good mechanical condition, and ready for installation on a blow molding machine. Specifications: - Production of 10L jerrycans - Process: extrusion blow molding Redex E U R Ujpfx Ahzebt - Hardened steel construction - Cavity with integrated handle - Hydraulic/pneumatic closing and guiding systems - Precisely machined surfaces - Previously used in industrial production - Stored on pallet, ready for transport 2) AdBlue spout mold – 2-cavity The lot also includes a 2-cavity mold for the production of AdBlue spouts/nozzles. Specifications: - 2-cavity mold for AdBlue spouts - Suitable for extrusion blow molding - Robust steel construction - Complete tool, ready for production - Ideal for the manufacture of accessories for jerrycans These molds are ideal for manufacturers of plastic packaging, industrial jerrycans, chemical containers, or AdBlue-related products.

Condition: excellent (used), Year of construction: 2005, Welcome We offer Thermoregulator - thermostat for injection molds - model HB THERM 160 U1 - series 4 Technical data: Manufacturer: HB - THERM Type: HB - 160U1 Year of production: 2005 Rsdpovyuvuofx Ahzobt Medium: Water Temperature: 160° C Heater power: 8 kW

Year of construction: 1999, condition: excellent (used), Injection cylinder for rubber Demag-Desna Rsdpfexuvgtox Ahzebt Year of manufacture approx. 1999

Condition: good (used), Year of construction: 1999, Demag Ergotech systems 500/200 Closing 50 TO Year 1999 Scrow 30 mm Rbsdpfeg Emvtjx Ahzjt Spraying weight approx 90 distance between tie bars 35,5x35,5

Condition: good (used), Year of construction: 1992, Cincinnati Milcron Closing 100 tons Year 1992 Steering: Rbsdeh R Npqspfx Ahzot Fanuc Auto sheet

Condition: excellent (used), Year of construction: 1992, Boy 30 T2 Closing 30 tons Rbedpfxjuh U Izj Ahzet Year 1992 Scrow 32 Spray weighted 123g

Condition: excellent (used), Year of construction: 2011, Injection cylinder 4450 unit Year 2011 Scrow 105mm PVC cylinder with normal Rbedpsgrzhhjfx Ahzet screw(no PVC screw)

Condition: excellent (used), Year of construction: 1999, Arburg 270S-250-60 Rbodpeg D Rknofx Ahzjt year 1999 Closing 25 TO Scrow 22 tie bar from stand 27x27 Spraying weight approx 27g

Condition: excellent (used), Year of construction: 2004, Angel Victory 80/45 Tech Closing 45 TOnnen, tie-bar-less Scrow 22 mm YEAR 2004 Rodpfx Aoh Rawbjhzobt CC 200

Condition: good (used), Year of construction: 1989, Angel ES 7000/800 Closing 800 To FY 1989 cc 90 Rsdpfx Ahec Tt Ifszsbt distance between tie bars 100x100 Snow through knife 105 mm Weighted 64 tons / 41 To+ 15 TO ) splash weight ca3760g The machine in good condition