Used Aluminium Injection for sale (3,901)

Condition: not inspected (used), Year of construction: 2001, operating hours: 108,293 h, functionality: unexamined, machine/vehicle number: 45069, total length: 9,000 mm, total width: 2,300 mm, total height: 2,500 mm, overall weight: 33,500 kg, Handling costs are included in the price. Automation is not included in the system. For sale is a used machine from a site closure. Lodpfxezrd Tpo Apmehk Sale is made excluding any warranty for defects. The machine has not been inspected but was operational until the end.

Condition: not inspected (used), Year of construction: 1997, operating hours: 145,298 h, functionality: unexamined, machine/vehicle number: 31378, total length: 6,500 mm, total width: 2,000 mm, total height: 2,200 mm, A used machine from a site closure is being sold. Lhodpfezqabmsx Apmek Sale is made excluding any warranty for defects. The machine has not been inspected but was in working order until the end. Weight approximately 9000 kg.

Condition: not inspected (used), Year of construction: 1998, operating hours: 130,240 h, functionality: unexamined, machine/vehicle number: 34477, total length: 8,000 mm, total width: 2,200 mm, total height: 2,500 mm, overall weight: 21,000 kg, includes handling linear robot A used machine from a site closure is being sold. Lhodpfx Aozrd Aqspmsk Sale is made excluding any warranty for defects. The machine has not been inspected but was in working order until the end.

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 178759, clamping force: 2,000 kN, screw diameter: 35 mm, installation height: 350 mm, total length: 5,000 mm, total width: 2,200 mm, total height: 3,800 mm, overall weight: 13,000 kg, power: 53.5 kW (72.74 HP), input frequency: 50 Hz, input voltage: 400 V, controller manufacturer: ARBURG, table diameter: 1,500 mm, ARBURG ALLROUNDER 1500 T 2000-350 Injection Molding Machine - Clamping force: max. 85 kN - Opening force: max. 120 kN - Opening stroke: max. 300 mm Lhodpfxjzlfmks Apmek - Distance between mold plates: max. 650 mm - Screw travel: max. 145 mm Note: The item must be picked up between September 8th and 10th, 2026, on a date to be confirmed. FCA D-63128 Dietzenbach – loaded onto a truck.

Condition: not inspected (used), Year of construction: 2000, operating hours: 104,771 h, functionality: unexamined, machine/vehicle number: 42221, total length: 8,000 mm, total width: 2,200 mm, total height: 2,500 mm, overall weight: 21,000 kg, Includes linear robot. A used machine from a site closure is being sold. Sale is made with the exclusion of any warranty for defects. Lsdpfx Apozrdl Sjmohk The machine has not been inspected but was operational until the end.

Condition: not inspected (used), Year of construction: 1991, operating hours: 108,378 h, functionality: unexamined, total length: 8,000 mm, total width: 2,200 mm, total height: 2,500 mm, overall weight: 20,200 kg, For sale is a used machine from a site closure. Lhodpfx Aezrczlopmjk Sale is made with the exclusion of any warranty for defects. The machine has not been inspected but was in working order until the end.

Condition: not inspected (used), Year of construction: 2002, functionality: unexamined, machine/vehicle number: 45719, total length: 9,000 mm, total width: 2,300 mm, total height: 2,500 mm, overall weight: 33,500 kg, Handling including linear robot. Automation is not included but can be purchased separately upon request. Ljdpfx Ajzrd Ugopmehk Automation is integrated; programming work may be required. For sale is a used machine from a site closure. Sale is made excluding any warranty for defects. The machine has not been tested but was operational until the end.

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 243708, screw diameter: 15 mm, total length: 2,500 mm, total width: 1,500 mm, total height: 2,500 mm, overall weight: 1,700 kg, power: 39 kW (53.03 HP), input frequency: 50 Hz, input voltage: 400 V, input current: 64 A, controller manufacturer: SELOGICA, control voltage: 230 V, ARBURG ALLROUNDER 220 S 180-70 injection molding machine - Rated current for motor heater: 57 A - Includes core puller, manufacturer: MARCZINKOWSKI Please note: the item must be picked up on September 3, 2026, at a date to be confirmed. Lsdpfxjzldp Ro Apmjhk FCA D-58507 Lüdenscheid - loaded onto a truck.

Condition: not inspected (used), Year of construction: 2002, functionality: unexamined, machine/vehicle number: 45069, overall weight: 32,000 kg, For sale is a used machine from a site closure. Lhodpfx Apozrd U Hemjk Sale is made with the exclusion of any warranty for defects. The machine has not been inspected but was in working order until the end.

Condition: good (used), Year of construction: 2007, clamping force: 800 kN, screw diameter: 40 mm, clearance between the columns: 370 mm, injection pressure: 1,390 bar, injection weight: 168 g, mold height (min.): 250 mm, ejector stroke: 150 mm, Clamping force: 80 t Year of manufacture: 2007 Injection unit: 250 Screw diameter: 40 mm Specific injection pressure: 1390 bar Injection volume: 185 ccm Tool closing system: 800 Clamping force: 80 t Distance between columns: 370 x 370 mm Ejector force: 40 kN Tool height: 250 mm Opening stroke: 440 mm Ejector stroke: 150 mm Weight: 3180 kg Control system: Selogica Equipment: 2 x hydraulic core Lhodpfxozt In Te Apmsk 5 heating zones for the mold Rotameter

Condition: not inspected (used), Year of construction: 2012, functionality: unexamined, machine/vehicle number: 17659, total length: 11,000 mm, total width: 3,000 mm, total height: 2,600 mm, overall weight: 40,000 kg, Includes handling equipment, peripherals, and conveyor belt. A used machine is being sold as part of a site closure. Sale is made excluding any warranty for defects. Lhjdezrd Slepfx Apmjk The machine has not been inspected but was in working order until the end.

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, machine/vehicle number: 43222, clamping force: 2,750 kN, screw diameter: 70 mm, injection pressure: 1,441 bar, total height: 2,500 mm, overall weight: 20,000 kg, For sale is a used machine from a site closure. Sale is made with the exclusion of any warranty for defects. Lhodpfx Ajzrdhyopmjk The machine has not been inspected but was in working order until the end.

Condition: used, Year of construction: 1998, operating hours: 129,241 h, functionality: unexamined, machine/vehicle number: 37064, clamping force: 800 kN, overall weight: 5,900 kg, Year of manufacture: 1998 Serial number: 37064 Weight: 5,900 kg Operating hours: 129,241 hours (as of 02/2025, continued operation until 12/2025) with ERC handling arm Lhodpozv Rdisfx Apmjk with Piovan material separator C10IX, SN: 3AL 9945 / Year of manufacture: 1998 with 2x Piovan temperature control units ETM09 with Engel ERC 23/3-CL, serial number 93996, year of manufacture 1998 Functionality and technical data have not been verified. without any further items/without any further accessories, unless explicitly stated as part of the item. If interested, please contact us via email!

Condition: used, Year of construction: 1998, operating hours: 140,252 h, functionality: unexamined, machine/vehicle number: 37066, overall weight: 9,000 kg, Year of manufacture: 1998 Serial number: 37066 Weight: 9,000 kg Operating hours: 140,252 hours (as of 02/2025, continued operation until 12/2025) with Engel ERC 33/1-CL, serial number 93998 with Piovan material separator C10IX, year of manufacture 1998 with Piovan ETW09-P6, year of manufacture 2019 with Single 1-9 B5/10-TK6, year of manufacture 2008 Functionality and technical data have not been verified. without any additional items/without any additional accessories, unless explicitly mentioned as part of the item. Ljdjzv N Iyepfx Apmshk If interested, please contact us by email!

Condition: excellent (used), Year of construction: 2017, ENGEL DUO 11050/2300 injection molding machine Year of manufacture: 2004 Lodozvwl Tspfx Apmohk Operating hours: 70,029 h Type: hydraulic, two-platen, large-format injection molding machine Clamping unit • Clamping force: 23,000 kN / 2300 t • Dimensions of mounting plates: 2900 × 2500 mm • Distance between columns: 2000 × 1600 mm • Minimum mold height: 700 mm • Maximum mold height: 1890 mm • Maximum opening width: 3800 mm Injection unit • Screw diameter: 135 mm • Injection volume: 8870 cm³ • Injection shot weight for PS: 8071 g • Maximum injection pressure: 1600 bar • Screw: replaced in 2011 • Screw design: reinforced, adapted for processing special materials Additional equipment • Magnetic plates for mold mounting – functional and ready for use • Number of hydraulic cores: 2 • Number of mold heating zones / hot runner channels: 36 • Number of hydraulic cascades: 10 • Mold tilting option • Robot: not included Magnetic mold clamping system The machine is equipped with functional magnetic plates, enabling quick mold mounting and replacement. The system is fully operational and constitutes a significant piece of additional equipment for the machine, especially with frequent mold changes. Machine weight • Weight of the main unit: approx. 113 t • Weight of the control cabinet and additional elements: approx. 18 t • Total approximate weight: approx. 131 t

Condition: used, Year of construction: 1998, operating hours: 151,023 h, functionality: unexamined, machine/vehicle number: 37065, clamping force: 800 kN, overall weight: 5,900 kg, Year of manufacture: 1998 Serial number: 37065 Weight: 9,000 kg Operating hours: 151,023 hours (as of 02/2025, continued operation until 12/2025) with ERC handling arm with Piovan temperature control unit THW9, serial number: 120000025075, year of manufacture: 2016 with single temperature control unit 1-9-B5/10-TK6, year of manufacture: 2013 with Engel ERC 23/3-CL, serial number: 93997, year of manufacture: 1998 Functionality and technical data have not been verified. without any further items/without any further accessories, unless explicitly stated as part of the item. Lhodpfxszv N Uaj Apmsk If interested, please contact us via email!

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, machine/vehicle number: 43225, total length: 5,500 mm, total width: 2,000 mm, overall weight: 6,000 kg, Small handling system installed in the machine. A used machine from a site closure is being sold. Sale is made excluding any warranty for defects. The machine has not been tested but was operational until the very end. Lhodpfozrb Spox Apmek

Condition: excellent (used), Year of construction: 2017, WITTMANN BATTENFELD Macro Power 900/8800 injection molding machine Year of manufacture: 2017 Serial number: 138337-100 Machine with Wittmann robot Clamping unit • Clamping force: 9,000 kN / 900 t • Opening force: 300 kN • Maximum opening stroke: 2,100 mm • Minimum mold height: 500 mm • Maximum mold height: 1,000 mm • Maximum distance between platens: 3,100 mm (with max. mold height of 1,000 mm) • Dimensions of mounting platens: 1,720 × 1,550 mm • Distance between columns: 1,200 × 1,000 mm • Ejector stroke: 300 mm • Ejector force: 165 kN Injection unit 8800 • Screw diameter: 105 mm • Screw pitch: 525 mm • L/D ratio: 22:1 • Theoretical injection volume: 4,545 cm³ Lhsdezvwirjpfx Apmsk • Maximum injection pressure: 1,931 bar • Maximum screw speed: 167 rpm • Maximum plasticizing rate: 151 g/s • Screw torque: 8,000 Nm • Maximum volumetric flow rate: 725 cm³/s • Injection flow rate with dual pump – option: 906 cm³/s • Nozzle stroke: 950 mm • Nozzle clamping force: 129 kN • Cylinder heating capacity: 53.9 kW • Number of cylinder heating zones: 7 Hydraulic system / drive • Pump power: 90 kW • Oil tank capacity: 1,100 l • Heating power: 53.9 kW Dimensions and weight • Machine length: 10,100 mm • Machine width: 3,400 mm • Machine height: 2,700 mm • Machine weight: 35,200 kg / 35.2 t

Condition: not inspected (used), Year of construction: 1998, functionality: unexamined, machine/vehicle number: 7814-0045, total length: 4,000 mm, total width: 1,500 mm, total height: 2,000 mm, Weight approximately 3000 kg Ledpfx Apezqam Ajmshk For sale is a used machine from a site closure. Sale is made excluding any warranty for defects. The machine has not been inspected but was operational until the very end.

Condition: excellent (used), Year of construction: 2007, clamping force: 2,000 kN, screw diameter: 55 mm, injection pressure: 2,183 bar, injection weight: 562 g, mold height (min.): 400 mm, ejector stroke: 180 mm, Engel VC 1350/200 Tech Clamping force: 200 tons Year of manufacture: 2007 Weight: 14,200 kg Dimensions (L x W x H): 6.3 x 1.9 x 2.3 m Injection unit: .../1350 Screw diameter: 55 mm Injection volume: 618 cm³ Lsdpfx Apjzt I Sromjhk Shot weight (for PS): 562 g Specific injection pressure: 2,183 bar Mould clamping system: 200/... Mould platen dimensions: 860 x 570 mm Mould installation height: 400 mm Opening stroke: 750 mm Maximum platen distance: 1,150 mm Ejector stroke: 180 mm Ejector force: 80 kN Equipment: - 2 × hydraulic core on moving platen - Pneumatic valve - 8 hot runner zones - 8-section rotameter

Condition: used, Shaker Fixture Cube / Clamping Cube made of Aluminum Manufacturer: Unknown Type: Shaker Fixture Cube / Fixture Block / Clamping Cube Material: Aluminum Machine Type: Clamping cube for vibration test benches / vibration testing External dimensions: approx. 240 × 240 × 240 mm For sale is a used Shaker Fixture Cube made of aluminum. The clamping cube was developed for use on electrodynamic vibration test benches and serves for the secure fastening of test specimens, measuring setups, and special devices. Due to the precision-machined clamping surfaces and the numerous threaded holes on all sides, the fixture cube is ideally suited for testing laboratories, research institutions, mechanical engineering, the automotive industry, and aerospace technology. Technical data: Manufacturer: Unknown Material: Aluminum Design: Shaker Fixture Cube / Clamping Cube / Fixture Block External dimensions: approx. 240 × 240 × 240 mm 4 mounting holes: Ø approx. 80 mm Central through hole Precision-machined clamping surfaces Threaded holes on all side surfaces Heavy-duty industrial design Dimensions: External dimensions (W × D × H): approx. 240 × 240 × 240 mm Material: Aluminum Features: Precision-machined clamping surfaces Threaded holes on all side surfaces Four large mounting holes Central through hole Heavy-duty aluminum construction High stiffness for dynamic loads Suitable for individual test setups Application areas: Vibration test benches Vibration testing Environmental testing Testing laboratories Research and development Lhodpfx Aozp E Dkspmjk Mechanical engineering Automotive industry Aerospace technology Shipping data: Dimensions (W × D × H): approx. 240 × 240 × 240 mm Shipping via parcel service possible by arrangement. Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age and use. Scope of delivery: Shaker Fixture Cube made of aluminum Scope of delivery as shown in the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Condition: used, Year of construction: 2010, operating hours: 80,000 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 560 mm, displacement volume: 442 cm³, injection pressure: 1,946 bar, mold height (min.): 660 mm, ejector force: 69 N, ejector stroke: 180 mm, total length: 5,700 mm, total width: 1,700 mm, total height: 2,200 mm, overall weight: 10,950 kg, The machine is currently in production, but it will need to be relocated soon as it is being replaced. Lodpfx Apezub Ntjmohk

Condition: excellent (used), Year of construction: 2007, clamping force: 1,000 kN, screw diameter: 40 mm, clearance between the columns: 420 mm, injection pressure: 1,865 bar, injection weight: 192 g, mold height (min.): 200 mm, ejector stroke: 100 mm, Year of manufacture: 2007 Injection shot weight: 192g Injection unit 410 Screw diameter: 40 mm Lhodpfozt I Rnjx Apmek Specific injection pressure: 1865 bar Injection volume: 217 ccm Injection shot weight: 192 g Screw L/D ratio: 20 Mold closing unit 100 Mold plate dimensions: 600x600 mm Distance between columns: 420x420 mm Ejector force: 35 kN Mold height: 200 mm Ejector stroke: 100 mm Weight: 5000 kg Control system: NC4 Tooling: - 2 x hydraulic core - pneumatic valve - Euromap 67 connector

Condition: used, Year of construction: 2018, Serial no. 221921, control system, manufacturer Engel, type CC300, clamping force 1,700 t, 2 injection units, rotary table, installation height min./max. 800 - 1,600 mm, platen distance 3,350 mm, clear width horizontal/vertical 1,850 / 1,415 mm, 16 cascades, 64 hot runner nozzles, core pulls hydr. 4 (DS) / 4 (AS), screw diameter 105 / 50 mm, shot weight 4,050 / 410 g, operating hours 22,401, machine weight 75,400 kg, mold temperature control unit, manufacturer Oni, type Rhytemper FlexControl 32, 4x 8-channel block modules 125 °C, 6-channel block modules 125 °C, visualization unit, parts removal handling system, manufacturer Engel, type Viper 60, 5 axes (X, Y, Z, C, B axis), nozzle spacing 300 mm, year of manufacture 2018, serial no. 221938, part enclosure, discharge conveyor, mobile conveyor, manufacturer Engel, type BGR FB100 KMAT, year of manufacture 2018, serial no. 2144098, length approx. 4,200 mm, width 1,000 mm, external temperature control unit and material dosing system are not included in this item. Damages: hydraulic hoses leaking. Lodpfxey I R Tqe Apmshk +++ Attention: Machine is part of an online auction! +++

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, machine/vehicle number: 43227, total length: 6,000 mm, total width: 2,000 mm, total height: 2,000 mm, Weight approx. 9000 kg. Lhedpfx Ajzqapdjpmjk For sale is a used machine from a site closure. Sale is made excluding any warranty for defects. The machine has not been tested but was in working order until the end.