Used Mold for sale (1,853)

Condition: excellent (used), Year of construction: 2007, Mold Masters Hotrunner external 3 zones Hotrunner TMXL-3/3-0 We have available Ljdpfx Ahovax Izjvohd 7 units

Condition: excellent (used), Year of construction: 2004, Hotrunner external 3 zones/ possible 6 zones Lhjdpouykpuefx Ahvjd

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, overall weight: 8,700 kg, workpiece length (max.): 165 mm, workpiece diameter (max.): 35 mm, production capacity: 7,200 unit/h, TECHNICAL DETAILS Number of cavities: 6 Max. output: 7,200 bottles/h Product dimensions Lsdpfx Ahoyrfvgsvehd Max. preform length: 165 mm Preform diameter: 18–35 mm Ring diameter: 27–42 mm Max. neck finish diameter: 38 mm Neck height: 9–27 mm Max. bottle height: 350 mm Max. bottle diameter: 105 mm Max. bottle volume: 2 l MACHINE DETAILS Dimensions & Weight Blow module (L × W × H): 3,293 × 2,325 × 3,196 mm Control cabinet (L × W × H): 1,998 × 602 × 2,410 mm Blow module: 6,300 kg Control cabinet: 1,200 kg Preforms feeder: 1,200 kg Total weight: 8,700 kg Noise level: 83 dB(A) Installed power Installed power: max. 160 kW Reference consumption (1,500 ml bottle): 88 kW Reference consumption (1,000 ml bottle): 62 kW Reference consumption (500 ml bottle): 45 kW Infrared heating (9 zones): 132 kW Operation and feed system: 28 kW Power supply Supply voltage: 230/400 V ±10 % Frequency: 50 Hz ±1 % Cooling water Cooling capacity: 20,000 kcal/h Water temperature: 8–12 °C Flow rate: max. 5 m³/h Pressure: 3–5 bar Compressed air Air consumption at 40 bar (0.25–2 l bottle): 180–700 Nm³/h Air consumption at 7 bar (operating air): 35 Nm³/h

Condition: used, Year of construction: 2003, Lot consists of: (1) Plastic injection moulding machine Technical Details: Own weight: 1000 kg; rated motor power: 17 A; Rated voltage: 24 DC V; Frequency: 50 Hz; Nominal power: 400 V; Rated current: 44 A Lhodpoylai Uefx Ahved

Condition: used, Year of construction: 2006, Own weight: 3300 kg; Hydraulic operating pressure: 210; Rated motor power: 28.5 A; Rated voltage: 24 V DC Lhjdsylabkjpfx Ahvod

Condition: ready for operation (used), Year of construction: 2007, operating hours: 91,708 h, clamping force: 8,000 kN, screw diameter: 135 mm, displacement volume: 8,870 cm³, total length: 11,810 mm, total width: 3,200 mm, total height: 2,900 mm, Clamping force: 8000 kN Tie bar spacing h x v: 1170 x 1000 mm Platen size h x v: 1550 x 1520 mm Min. mold height: 500 mm Max. mold height: 1100 mm Max. daylight: 2100 mm Opening stroke: 1600 mm Screw diameter: 135 mm Shot volume: 8870 ccm Injection pressure: 1640 bar Ledpfx Ahsyv E Hbovohd Equipment Screen text in German Screen text in English CEE socket 16A CEE socket 16A CEE socket 16A Compact Flash drive Hydraulic core pull 1x Machine including handling Machine including safety enclosure Machine with water manifold EUROMAP 12 interface Handling interface USB interface Mold heater 16x Handling Technical Data Type of handling: Linear Brand: ENGEL Model: ERC 64/1-F Handling weight: 25 kg X-axis: 1300 mm Y-axis: 2200 mm Z-axis: 4760 mm Machine dimensions LxWxH: 11.81 m x 3.2 m x 2.9 m Total weight: 56,000 kg

Condition: ready for operation (used), Year of construction: 2005, operating hours: 59,000 h, clamping force: 4,200 kN, screw diameter: 60 mm, displacement volume: 769 cm³, injection pressure: 2,200 bar, total length: 6,830 mm, total width: 2,330 mm, total height: 2,480 mm, overall weight: 23,090 kg, Clamping force: 4200 kN Lhjdpfx Aoyv E Dashvjd Tie bar spacing (H x V): 800 x 800 mm Platen size (H x V): 1270 x 1200 mm Min. installation height: 580 mm Max. platen distance: 1300 mm Opening stroke: 720 mm Screw diameter: 60 mm Shot volume: 769 ccm Injection pressure: 2200 bar Equipment Display language: German Hydraulic core pull 4x Machine without handling Machine without material hopper Levelling elements Mould heating 12x Machine dimensions (LxWxH): 6.83m x 2.33m x 2.48m Total weight: 23090 kg

Condition: ready for operation (used), Year of construction: 2004, operating hours: 69,000 h, functionality: fully functional, clamping force: 3,500 kN, screw diameter: 70 mm, displacement volume: 1,039 cm³, injection pressure: 1,441 bar, total length: 7,980 mm, total width: 2,200 mm, total height: 2,570 mm, overall weight: 30,750 kg, Clamping force: 3500 kN Platen size (h x v): 1050 x 980 mm Minimum mould height: 350 mm Maximum platen distance: 1300 mm Opening stroke: 950 mm Screw diameter: 70 mm Shot volume: 1039 ccm Injection pressure: 1441 bar Equipment Screen text in German Hydraulic core pull 2x Machine including conveyor belt Machine including handling unit Machine including safety enclosure Machine without material hopper Ledpfx Ahoyv Embjvshd Leveling elements Handling Data Manufacturer: ENGEL Control: ER-HLI 81 Year of manufacture: 2004 Machine dimensions (LxWxH): 7.98m x 2.22m x 2.57m Total weight: 30750KG

Condition: used, Year of construction: 2010, operating hours: 39,000 h, machine/vehicle number: SO134, Used Nissei blow molding machine ASB 50MB 2010Technical Specifications & Performance DataThis Nissei ASB ASB-50MB is a one-stage biaxial orientation stretch blow molding machine designed for precision PET bottle production. As a compact rotary indexing platform, it integrates injection and blow molding in a single cycle, ensuring excellent neck finish accuracy and consistent wall distribution. This second hand machine offers reliable output for beverage production and industrial packaging projects seeking a proven, cost-effective solution.Manufacturer: Nissei ASB engineeringModel: ASB-50MBManufacturing year: 2010Process: One-stage ISBM (injection-stretch-blow)Production speed: approx. 1000 bph with 4 cavitiesCavities: current setup 4 (machine supports 1–6 cavities depending on article)Bottle formats: 40 ml to 750 mlContainer type: PET bottlesElectrical data (plate): 400 V AC heater, 6.1 kW; motor 380 V AC 18.5 kW and 200 V AC 0.75 kW; 50 HzInstalled power (approx.): 25.35 kWAdvanced Automation & Control SystemsThe ASB-50MB platform offers stable, repeatable operation with synchronized control of injection, conditioning, stretching, and blowing stations. Its rotary indexing table ensures precise timing between stages, supporting high-quality bottle formation in a compact footprint. Operator interfaces facilitate routine adjustments and process monitoring, while integrated heating controls deliver accurate temperature profiles for consistent preform conditioning.Rotary indexing one-stage machine with coordinated station controlDedicated heater power section for precise thermal managementStructured electrical supply at 50 Hz for stable operationDesigned for quick mold and format changeovers within the compatible size rangeIntegrated protections and interlocks for safe machine accessProduction Line Integration CapabilitiesThis blow molding machine integrates seamlessly within a used bottling line or as a standalone PET container production unit. Its output can feed conveyors to downstream rinsing, filling, capping, and labeling equipment in beverage production and other industrial packaging applications.Standalone or inline configuration with downstream bottling equipmentCompatible with standard conveyor interfacesFormat flexibility for 0.04L to 0.75L PET bottlesSuitable for water, juice, CSD, and other PET applications when paired with appropriate downstream systemsMachine Condition & Maintenance HistoryThis second hand ASB-50MB is in good working condition and ready for operation. The machine shows approximately 39,000 operating hours, consistent with typical industrial usage while retaining solid performance potential for new production environments.Operational status: ready for operationOperating hours: approx. 39,000Well-maintained example from a proven ISBM seriesOperational Perfo... Lodpoyhbf Aefx Ahvehd

Condition: used, Year of construction: 2006, operating hours: 33,000 h, machine/vehicle number: SO135, Used Nissei blow molding machine ASB 50MB 2006Technical Specifications & Performance DataThis one-stage biaxial orientation stretch blow molding machine delivers consistent PET bottle production with reliable throughput and compact footprint. Manufactured by ASB INTERNATIONAL PVT. LTD. (Nissei ASB engineering), the ASB-50 MB combines injection, conditioning, and blow molding in a single machine, reducing handling and improving quality control for a second hand or used bottling line seeking dependable PET bottle supply.Manufacturer: ASB INTERNATIONAL PVT. LTD. (Nissei ASB)Model: ASB-50 MBMachine type: One-stage biaxial orientation stretch blow molding machineYear: 2006Production speed: ~1,000 bottles/hour with 4-cavity moldCavities: Configurable 1–6; supplied in 4-cavity configurationFormats: 40 ml to 750 ml (typical PET bottle sizes within this range)Containers: PET bottlesElectrical supply: 400 VAC, 50 HzInstalled power (observed): approx. 20.1 kWMotor circuits: 380 VAC — 13.5 kW; 200 VAC — 0.5 kWHeater circuits: 400 VAC — 6.1 kWAdvanced Automation & Control SystemsThe ASB-50 MB architecture enables precise control of heating and stretch-blow parameters for stable bottle quality across different formats. Typical one-stage controls coordinate injection, conditioning, and blowing stations for repeatable results, with safety interlocks and guarding to protect operators. Quick-change mold capability supports efficient format changes, minimizing downtime during product transitions common in industrial packaging and beverage production environments.Production Line Integration CapabilitiesDesigned for PET bottle manufacturing upstream of filling, capping, and labeling systems, this machine integrates effectively with conveyors, accumulation tables, and downstream bottling equipment. Its one-stage process eliminates the need for separate preform handling equipment (such as preform unscramblers, tippers, and elevators), simplifying line layouts in a used bottling line. Bottle format flexibility from 40 ml to 750 ml supports water, juice, CSD, and other beverage applications when equipped with appropriate molds.Machine Condition & Maintenance HistoryThis second hand machine is presented in ready-for-operation condition, suitable for immediate integration into an existing beverage production or industrial packaging setup. As with any pre-owned blow molding machine, commissioning checks and routine maintenance are recommended to align the installation with site utilities and product specifications.Operational Performance & VersatilityThe ASB-50 MB delivers stable output around 1,000 bph in a 4-cavity configuration, with potential to reconfigure up to 6 cavities depending on molds and process settings. Its one-stage design promotes excellent neck dimensional control and clarity, supporting a wide range of bottle shapes within the 40–750 ml range. When paired with suitable molds and process recipes, it can produce PET containers for ... Lodoyhbfiopfx Ahvshd

Condition: used, Year of construction: 2009, machine/vehicle number: PR21, Used injection molding machine HyPET 120 - 2009Technical Specifications & Performance DataThis Husky injection molding machine is engineered for high-volume PET preform manufacturing and is well suited for integration into a used bottling line or as a second hand addition to industrial packaging operations. The 120-ton clamping platform is paired with a 32-cavity hot runner system, enabling consistent output of PET preforms across multiple bottle formats. Manufactured by Husky in 2009, the unit is configured for rapid mold changeovers and stable cycle times, supporting beverage production with precise neck finishes and preform weights.Manufacturer: HuskyModel: HyPET120 P85/95 E85Year of manufacture: 2009Clamping force: 120 tonsCavities: 32Hot runner system: Husky 32-cavity hot runner, common across supplied moldsNeck finishes: 29/25 mm primary; additional parts for 30/25 mmPreform weights (29/25 mm sets): 9.02 g, 12.46 g, 18.70 gAdditional 30/25 mm parts: 10.5 g, 14.0 g, 22.0 g, 25.0 g (one complete assembled set at 22.0 g)Cycle times (typical): 7 s, 8 s, 9 sElectrical supply: 400 V, 50 Hz, 3PH+N+PEMain supply current: 191 A (auxiliary supply: 40 A)Short-circuit rating (panel): 10 kAIncluded peripherals: Plastic Systems resin dryer with material hopper, mold dehumidifier, and available sparesBottle formats supported via preforms: 0.2L, 0.5L, 1.0LContainer material: PETAdvanced Automation & Control SystemsThe machine features Husky engineering for precise temperature control, shot stability, and efficient thermal management across the 32-cavity hot runner. The molding system supports fast setup with plug-and-play cold half plates, simplifying changeovers between formats and weights. Operator interaction is streamlined through an integrated control interface for recipe management, alarm diagnostics, and process monitoring. The control panel is designed for industrial duty with a 10 kA short-circuit rating and clear segregation of main and auxiliary supplies.Integrated HMI for process control and monitoringHot runner temperature control across all 32 cavitiesQuick-change cold half plates, tooling plate, and cooling pick setElectrical: 400 V, 50 Hz, three-phase with neutral and protective earthProduction Line Integration CapabilitiesOptimized for PET preform manufacturing, this system integrates cleanly with upstream resin handling and downstream conveyance to stretch blow molding, quality inspection, and packing stations in beverage production. The included Plastic Systems resin dryer and mold dehumidifier stabilize material and mold conditions, enhancing repeatability and line throughput in broader bottling equipment ecosystems.Inline or standalone operation for preform supplyCompatible with industrial packaging and beverage produ... Lodpfjyhbd Sjx Ahvjhd

Condition: used, Year of construction: 2009, machine/vehicle number: PR22, Used injection molding machine H160 - 2009Technical Specifications & Performance DataThis Husky injection molding machine is engineered for high-efficiency cap and closure production, making it an excellent choice for beverage production environments that require consistent, high-quality outputs. Manufactured in 2009, the unit features a 160-ton clamp force platform paired with a 24-cavity cap mold optimized for 29/25 mm neck finishes. It is supplied with robust auxiliary equipment to stabilize process conditions and streamline operation in an industrial packaging workflow.Manufacturer: Husky Injection Molding SystemsModel: H160 RS45/42Year: 2009Application: Cap/closure molding for beverage packagingMold cavitation: 24 cavitiesClosure specification: 29/25 mm, Free Start CapNominal part weight: 1.20 g (cap)Clamp force: 160 tonsElectrical supply: 400 V, 50 Hz, 3PH+N+PEMain supply current: 101 ALargest motor load: 42 ALargest heat load: 31 AShort-circuit current rating (SCCR): 10 kAIncluded equipment: Altanium heater controller, mold dehumidifier, hopper loader, color mixer unit, available spare partsAdvanced Automation & Control SystemsThe machine is equipped with an Altanium heater controller to deliver precise thermal management across the hot runner zones. This tight temperature control promotes uniform melt flow, faster startups, and reduced scrap, vital for thin-wall cap molding. The industrial control panel supports a 3-phase + neutral + protective earth electrical system, with clearly defined load ratings for motors and heating circuits to facilitate safe integration and predictable operation.Precision heater control with Altanium technologyClearly rated electrical distribution for motors and heatersStable process conditions for consistent cap qualityDesigned for quick setup and repeatable mold changeoversProduction Line Integration CapabilitiesThis unit integrates seamlessly into cap and closure production cells serving a used bottling line or standalone cap manufacturing operations. It can feed downstream systems such as vision inspection, lining/printing, and bulk handling for PET bottle closures. The 29/25 mm specification aligns with common beverage packaging neck finishes, supporting high-throughput operations in industrial packaging environments.Standalone or inline operation with downstream handlingCompatible with PET bottle packaging for beverage productionAuxiliaries included to stabilize material handling and color dosingMachine Condition & Maintenance HistoryThe machine is indicated as still in production, reflecting ongoing operational status and functional readiness. The inclusion of a comprehensive set of available spares and auxiliary units supports routine maintenance, uptime, and rapid troubleshooting typical of second hand i... Lhedpeyhbdxsfx Ahvod

Condition: good (used), Year of construction: 2006, operating hours: 107,027 h, functionality: fully functional, Clamping force 200 kN Lhjdpoyvt Ugsfx Ahved Screw diameter D55 mm Max. injection volume 511cm³ Mounting plates 860 x 860 mm Total weight 12.9 t

Condition: excellent (used), Year of construction: 2010, operating hours: 91,720 h, functionality: fully functional, Clamping force 150 kN Screw diameter D45 mm Max. injection volume 318 cm³ Lhodjyvt R Iopfx Ahved Mounting plates 688 x 688 mm Total weight 6840 kgs

Condition: like new (used), Year of construction: 2007, operating hours: 33,988 h, Clamping force 50 kN Ledpfoyvt Rbox Ahvjhd Screw diameter D18 mm Max. injection volume 25.4 cm³ Mounting plates 500 x 455 mm Total weight 3800 kg

Condition: excellent (used), Year of construction: 2010, operating hours: 84,854 h, functionality: fully functional, Clamping force 320 kN Screw diameter D60 mm Max. injection volume 664 cm³ Mounting plates 1030 x 1030 mm Total weight 17.5 t Ljdpfx Ahsyvt Itjvjhd

Condition: excellent (used), Year of construction: 2012, Arburg 820S 4000-2100/400 / Production line with the robot Sepro Industrial Robot SR S5-35 S3 Trans / Operating hours: 42,014 h in automatic mode Year of manufacture: 09.2012 Injection unit: Screw diameter: 60 mm Injection weight: 723 g Injection pressure: 2500 bar Dosing volume: 792 cc Clamping unit: Clamping force: 400 t Bar spacing: 820x820 mm Size of the clamping plates: 1171x1171 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - touchscreen Additional equipment: 2K injection molding machine with rotary table and robot Very good technical condition Operating hours: 42,014 h in Automatic operation Euromap 67 Robot interface Air valve x 6 Hydraulic, needle core pull, controlled by a proportional valve x 4 pairs Control with hot runners x 24 Reinforced injection units - bimetal Proportional valve on the vertical injection unit - precise injection Machine with six cylinders / batteries with compressed nitrogen (additional charge for fast work) Parallel movements Automatic tool height adjustment Screw diameter in the vertical injection unit: ⌀40 mm - 184 g/PS The built-in system for controlling the print quality from the Sensor Kistler brand - measuring the tool pressure Original Weber rotary table: very precise, electrically driven by a servo motor controlled by an inverter Lhodpfeyvrl Rex Ahvsd Rotary table diameter: 1200 mm Purchase of the rotary table at an additional cost Robot Sepro Industrial Robot SR S5-35 S3 Trans Year of manufacture: 2012 3-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z (telescopic) Travel paths in axes approx.: X-5000, Y-1400, Z-2000 Automatic axis lubrication Touch control panel The robot safety package Robot with adapter and protective housing Purchase of the robot for an additional charge Dimensions: Weight: 21000 kg Length/width/height: 8.00x2.32x4.21 m All machines offered are started by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to take part in live technical tests in our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2011, Arburg 1500T 3200-1300 e² / hybrid machine with one rotary table Year of manufacture: 2011 Injection unit: Screw diameter: 60 mm injection weight: 607 g Injection pressure: 2000 bar Metering volume: 664 ccm Clamping unit: clamping force: 320 t tie bar distance: 0x0 mm size of clamping platens: 1510 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA - touch screen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 30.000 in automatic mode Euromap 67 Robot interface Control with air valve Hydraulic core pull x 3 Lhodpfx Ahjyvrlqoved Control with hot runners x 13 Injection unit hardened - bimetal Main machine motor - servo motor driven by inverter Very precise rotary table driven by servo motor controlled by inverter Rotary table diameter: 1500 mm Horizontal injection unit with automatic injection height adjustment Self-closing nozzle Primus sensor - mold pressure control It is possible to convert the injection unit so that it works vertically Dimensions: Weight: 16080 kg Length/width/height: 4.91x2.12x4.62 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2008, Arburg 630S 2500-1300 ECO / Production Line with Sepro Industrial Robot SDR 22S Year of manufacture: 2008 Injection Unit: Screw diameter: 55 mm Shot weight: 521 g Injection pressure: 2380 bar Dosage volume: 570 ccm Clamping Unit: Clamping force: 250 t Tie bar distance: 630x630 mm Platen size: 900x900 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - touchscreen Additional equipment: Euromap 67 Robot interface Air valves x 4 Hydraulic core pulls x 2 Controller with 15 hot runner zones Injection assembly hardened - bimetallic Machine with cylinder / battery with compressed nitrogen (additional charge for fast operation) ECO – machine equipped with a system to adjust the minimal mould height Robot - Sepro Industrial Robot SDR 22S Year of manufacture: 2016 4-axis robot: 3 axes driven by servomotors (electric); C-axis - pneumatic Axis strokes: X-1500, Y-2200, Z-800 Vacuum x 2 Gripper x 2 Touch control panel Robot with adapter, conveyor belt and protective housing Acquisition of the robot and the conveyor belt available at extra cost Dimensions: Lhodpfeyvrlkox Ahvjd Weight: 12,510 kg Length/Width/Height: 6.57x1.76x2.46 m All offered machines are commissioned by our service technicians before sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2016, Arburg 570S 2200-290/100/100 / Production line with the Wittmann W823 robot / Operating hours: 20,499 h in automatic mode Year of construction: 2016 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Injection pressure: 2000 bar Metering volume: 144 ccm Clamping unit: Clamping force: 220 t Distance between tie bars: 570x570 mm Size of the clamping platens: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA touchscreen Lsdjyvrk Tjpfx Ahvjhd Additional equipment: 3-component injection molding machine, high speed Very good technical condition Operating hours: 20,499 h in automatic mode Euromap 67 Robot interface Air valve x 6 Hydraulic, needle core pull, controlled by a proportional valve x 4 Control unit with hot runners Hardened injection unit - bimetal Proportional valve on the injection unit - precise injection Machine with two cylinders / battery with compressed nitrogen (additional charge for fast work) The machine is designed for operation with an electric turntable. The machine has an inverter to control the servomotor in the rotary table and an interface for connecting the rotary table Parallel movements Screw diameter in the vertical injection unit: ⌀25 mm - 45 g/hp Screw diameter in the lateral injection unit: ⌀25 mm - 45 g/hp Wittmann W823 robot Year of construction: 2015 5-axis robot: 3 axes are driven by servomotors (electric); axis C and movement A Travel in axes: X-550, Y-1400 (telescopic), Z-3500 Touch control panel The safety package for robots Robot with adapter, conveyor belt and protective housing Purchase of the robot and conveyor belt for an additional charge Dimensions Weight: 10830 kg Length/width/height: 5.53x1.77x3.29 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2003, Arburg 570C 2000-350/150 / Production Line with Side-mounted Arburg Multilift Robot / 2K Machine Year of Manufacture: 2003 Injection Unit: Screw diameter: 40 mm Shot weight: 153 g Injection pressure: 2,120 bar Dosage volume: 182 ccm Clamping Unit: Clamping force: 200 t Tie bar spacing: 570x570 mm Platen size: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Lhodpfsyvrk Hex Ahved Production line with side-mounted Arburg Multilift robot 2K (two-component) machine Air valve x 1 Hydraulic core pull x 5 Control system with hot runner integration Reinforced injection units – bimetallic Proportional valves on injection units – precision injection Vertical injection unit – screw diameter: ⌀25 mm – 49 g/PS All machines offered are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2011, Arburg 570H 2000-800 e² / Hybrid Machine / Production Line with Arburg Multilift Select Robot Year of manufacture: 2011 Injection Unit: Screw diameter: 50 mm Shot weight: 359 g Injection pressure: 2000 bar Dosage volume: 392 cc Clamping Unit: Clamping force: 200 t Lodpfjyvrktox Ahvohd Tie bar spacing: 570x570 mm Platen size: 795x795 mm Ejector: electric Clamping system: toggle Control: SELOGICA - touchscreen Additional equipment: Hybrid machine: energy-efficient and very quiet Euromap 67 Robot interface Air valves x 4 Hydraulic core pulls x 2 Hot runner control x 12 Injection unit hardened - bimetallic Main machine motor - servo motor driven by inverter - energy-saving The injection unit is driven by a servo motor controlled by an inverter Machine with compressed nitrogen cylinder/battery (additional charge for high-speed operation) Central lubrication Parallel movements Arburg Multilift Select 6 kg traverse robot Year of manufacture: 03/2011 4-axis robot: 3 axes driven by servo motors (electric); C axis - pneumatic Travel ranges on axes: X-400, Y-800, Z-1400 Robot with adapter, conveyor belt and safety housing Purchase of robot and conveyor belt possible at extra cost Dimensions: Weight: 8700 kg Length/width/height: 5.58x1.71x2.21 m All offered machines are started up and checked by our service engineers before sale. A video of the technical inspections of the selected machine is available on request, or you can attend live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2012, Arburg 520S 1600-400/170 e² / Production line with Geiger robot Year of manufacture: 2012 Injection unit: Screw diameter: 35 mm Shot weight: 141 g Injection pressure: 2500 bar Dosage volume: 154 ccm Clamping unit: Clamping force: 160 t Tie bar spacing: 520 x 520 mm Platen size: 695 x 695 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - touchscreen Additional equipment: 2K injection molding machine with rotary table and Geiger robot Very good technical condition Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 5 Control system with 12 hot runner zones Reinforced injection units – bimetallic Machine with two cylinders / batteries with compressed nitrogen (additional charge for fast operation) Lhjdpfxoyvri Nj Ahvjd The machine features a built-in servomotor in the injection unit responsible for dosing the plastic Parallel movements Screw diameter in the vertical injection unit: ⌀30 mm - 77 g/PS Integrated Arburg brand conveyor belt and sorting flap Original Weber brand rotary table, highly precise – electrically driven (integrated inverter in the machine) Rotary table and robot available as an additional purchase Dimensions: Weight: 8140 kg Length/Width/Height: 4.81 x 1.84 x 3.45 m All offered machines are started up by our service technicians prior to sale. A video of the technical tests for the selected machine can be provided, or you can participate in live technical tests at our facilities in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2011, Arburg 520S 1600-290/100 / Production line with Wittmann W823 robot / Operating hours: 20,181 h in automatic mode Lhodjyvrivspfx Ahvsd Year of construction: 09.2011 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Injection pressure: 2000 bar Metering volume: 144 ccm Clamping unit: Clamping force: 160 t Distance between tie bars: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA touchscreen Additional equipment: 2K injection molding machine with rotary table and robot Very good technical condition Operating hours: 20,181 h in automatic mode Total number of operating hours: 28,473 h Euromap 67 Robot interface Air valve x 3 Hydraulic, needle core pull, controlled by a proportional valve x 2 Reinforced injection units - bimetal Proportional valves on injection units - precise spraying Machine with two cylinders / batteries with compressed nitrogen (additional charge for fast work) Parallel movements Screw diameter in the vertical spraying unit: ⌀25 mm - 45 g/hp Original turntable Purchase of the turntable for an additional charge Robot Wittmann W823 Year of construction: 2015 5-axis robot: 3 axes are driven by servo motors (electric); axis C and movement A Travel in axes: X-550, Y-1400 (telescopic), Z-3500 Touch control panel The safety package for robots Robot with adapter, protective housing Purchase of the robot for an additional charge Dimensions Weight: 6720 kg Length/width/height: 4.41x1.84x3.20 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2011, Arburg 520H 1500-400 e² / Hybrid Machine Year of manufacture: 2011 Injection Unit: Screw diameter: 40 mm Shot weight: 184 g Injection pressure: 2000 bar Dosage volume: 201 cc Clamping Unit: Clamping force: 150 t Tie bar distance: 520x520 mm Platen dimensions: 695x695 mm Ejector: electric Clamping system: toggle Control system: SELOGICA - Touchscreen Additional Equipment: Hybrid machine: energy-saving and very quiet Lhjdoyvripjpfx Ahved Euromap 67 Robot interface Core pull control Control system with 8 hot runner zones Injection unit hardened - bimetallic Main machine motor: servo motor with inverter - energy efficient Injection unit driven by a servo motor controlled by an inverter Machine equipped with a cylinder/compressed nitrogen accumulator (additional charge for high-speed operation) Central lubrication Parallel movements Priamus sensor - mold pressure control Dimensions: Weight: 6,010 kg Length/Width/Height: 4.67x1.56x2.21 m All offered machines are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or participate in live technical tests at our company in Łódź. Price: On request Length/Width/Height: 4.44x1.63x2.09 m Drive: Pump/Motor: 18.5 kW Heating capacity: 9.4 kW Total capacity: 27.9 kW All offered machines are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or participate in live technical tests at our company in Łódź. Price: On request