Used High Speed Spindle for sale (49,144)

Condition: good (used), Year of construction: 1979, functionality: fully functional, Drilling capacity into full 32 mm Tapping capacity into full M 32 mm Motor power 1.5 / 3 kW Iedpsz Ad Rcofx Ahysih Tool holder MK 4 Quill stroke 170 mm Stroke approx. 400 mm Speeds : Range 1 , infinitely variable from 38 - 192 rpm Range 2 , infinitely variable from 119 - 596 rpm Range 3 , infinitely variable from 400 - 2000 rpm

Condition: as good as new (ex-display), CMT–VSR Pro is an advanced high-speed core balancing machine including a manually operated, fixed-mount correction cutter that ensures a fine quality surface finish and a servo-controlled air valve to provide the highest measuring accuracy. The machine has been designed for the high-speed balancing of turbocharger core assembly of passenger car, light- and heavy-duty trucks. It is used for checking whether there is any unwanted dynamic phenomenon of a rotor at high rotational speed value e.g. the flexural of shaft by the moment of force. Balancing in a full range of rotational speed extends lifespan of turbocharger and eliminates the undesirable effect of whistling. Iiedpoiihqwsfx Ahyjh Core is installed on the hub of the machine by the use of a mounting flange with the two clamps to lock it. Turbine wheel is driven by compressed air supplied through a drive sleeve with a nozzle system. During a measurement an oil with an appropriate temperature and pressure is supplied, as a result of which the balancing conditions are similar to those of a combustion engine. As a result, the vibration graph of a core in relation to a rotational speed value and a vibration norm is displayed. In addition, to simplify the analysis of the vibration graph, the software indicates the exact angular position of a mass correction

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, • Worktable 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 • Infinitely variable speed control • Infinitely variable quill feed • Thread cutting device • 2 T-slots (18 mm) each, machine base rear and left • Machine lamp Iiedpfeyhdvkjx Ahysh • Central lubrication • Table surface machined on all sides • Safety guard on drill • Coolant system Dimensions and Travel Tool holder MT 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose to table min. mm 40 max. mm 710 Distance spindle nose to base plate min. mm 840 max. mm 1510 Drilling radius min. mm 540 max. mm 1590 Working table height mm 900 Machining Data Drilling capacity solid material St 60 Ø 45 mm GG 22 Ø 55 mm Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range rpm 15 - 2800 Torque Nm max. 250 Constant from rpm 15 - 200 Feed Drives Feed, stepless mm/rev 0.02 - 0.7 Feed force N 12,000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) with 750 x 1200 mm table kg 2,600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical schematic

Condition: used, Year of construction: 2004, pressure 80 t stroke 16 - 63 mm no. of strokes 100 - 750 /min distance between columns 970 mm dayligth (stroke and adjustment up) 380 mm column travel -side 380 mm table surface area 940 x 910 mm hole in the table 770 x 190 mm table height over floor 1180 mm ram surface 940 x 510 mm ram adjustment 76 mm material width 203 mm material thickness - 6,0 mm feed length 0 - 120 mm power requirement 37,0 kW Weight 14,50 t dimensions of the machine ca. 2,7 x 1,7 x 3,6 m with infinitely variable drive, pneumatic clutch/brake combination, semi-automatic stroke adjustment, motoric ram adjustment, fix table, circular oil lubrication mechanical roll feed Bruderer BBV 205/120 with drive via main shaft / pivot shaft of the press consoles Guethle CK 01/0800 Iedpfxezrpq He Ahyeih

Condition: refurbished (used), Year of construction: 1997, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Danumeric 440 overhauled and digitized 2024 Machine version - Work table 1800 x 600 mm with 4T-slots - Boom travel 1050 mm - SK 40 drilling spindle with tool clamping device - Infinitely variable speed programming - Infinitely variable quill feed via three-phase servo motor - 2 T-slots 18 mm on the machine base at the rear - 2 T-slots 18 mm on the left machine base frame - Thread cutting device - Central lubrication - Coolant device - Machine light - CE marking - Safety device - USB interface Dimensions and travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle bottom edge - min mm 70 Table top edge max. mm 680 Distance spindle bottom edge - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Worktable height mm 900 Cutting values Drilling capacity into solid St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100 % duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feed rates stepless mm/min 5 - 2000 Accuracy Positioning accuracy X-, Y-axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, easy to read from all sides legible from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental measurements, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining cycles Standard software options: Programming in dialog, 38 zero offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted entry Iisdpfsu Dg D Aox Ahyjh Zero point determination: Cycles for determining zero points by manually probing the workpiece for probing the workpiece for: - any clamped rectangular parts - any clamped round parts - Mediation of cast and flame-cut parts - Angular position detection for round parts by touching reference edges or surfaces Test graphic Graphic display of drilling patterns Data interfaces USB

Condition: used, Year of construction: 1985, machine/vehicle number: 131 153, Press capacity: 40 ton Ram stroke adjustable: 8 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 310 mm Free frontal opening L-R: 820 mm Table surface area : 810 x 450 mm Slide area: 720 x 350 mm Hole in table: 600 x 110 mm Number of strokes: 100 - 1.000 s.p.m. Iodpfx Ahjuqc Agjyeih Table height over floor: 1.030 mm Required power: 19,5 kW Weight of machine approx.: 6,8 ton Extended machine accessories

Condition: new, The AE-400 SERVO edger is designed for longitudinal trimming and slitting of side boards fed to the machine at high speeds (100-400m/minute). The machine works directly with conveyors feeding and receiving boards in automatic mode. The machine is equipped with a board scanner from above and below. The maximum instantaneous efficiency of the edger up to 55 boards/min can be obtained by cutting a 2.5 m board to the same width without changing the spacing of the saw blades. Each adjustment of the edger node devices to the width of the board causes a change in performance. The average productivity of the machine, depending on the work configuration, ranges from 35-48 boards/min. technical dance No. Parameter Value 1. Saw spindle drive motor power. 55 kW 2. The number of revolutions of the saw spindle. 3550 rpm 3. Diameters of used saws. 400mm 4. Maximum cutting height. 50mm 5. Number of saw blades used. 2 to 3 pcs. (2 floating saws) 6. Minimum board length. 2000mm 7. Maximum raw material length. 6200mm 8. Maximum number of boards after cutting 1 board: 2 pcs. 9. Feed: 100- 400m/min Cutting for 1 board - with two saws (2 floating saws): Ijdpfenygvrex Ahysih 1. Minimum saw spacing (board width after cutting) 75 mm 2. Maximum spacing of extreme saw blades (board width after cutting) 300 mm Cutting into 2 boards - with three saws (2 floating saws), 1. Spacing the saws on the fixed coupler (board width after cutting) 50-100mm 2. Spacing between floating saws (board width after cutting) 50-100mm 3. Cutting into 2 boards minimum 2 x 50mm 4. Cutting into 2 boards maximum 2 x 100mm Other machine configurations are possible on request. We also produce other sawmill lines: log sorting plants, board sorting plants, board stackers, conveyors.

Condition: good (used), Year of construction: 1996, operating hours: 51,573 h, ram adjustment: 51 mm, table length: 510 mm, table width: 400 mm, input voltage: 400 V, Bruderer BSTA200M High-performance automatic punching press. Max. pressure: 200 [kN] (20 [T]). Speed range: 100 - 1800 [spm]. Year of manufacture: 1996. Feed BBV 101/75 on the right-hand side. Max. strip width: 125 [mm]. Max. feed distance: 75 [mm]. Adjustable stroke: 8; 13; 19; 25; 32; 38; 44; 51 [mm]. Ram height adjustment: 51 [mm]. Iiedpfxjq A Uahs Ahyeh Dimensions of the clamping plate (clamping plate): 510 x 400 [mm]. Bed opening: 400 x 160 [mm]. Max. distance of the mold width between the columns: 410 [mm]. Max. strip passage width: 260 [mm].= Connected load: 36 [kVA]. Power 400 [V] 50 [Hz]. Control voltage: 24 [V]. Machine dimensions: H 2540 x W 1661 x D 855 [mm]. Machine weight: approx. 3100 [kg]. Control cabinet and control system. CABIN ON PHOTOS IS NOT INCLUDED (optional cost of cabin only 8.000 EUR) Including all original technical documentation. Also high-speed presses in stock: Mabu, Schaal, Bihler and other Bruderer models.

Condition: ready for operation (used), functionality: fully functional, overall weight: 1,800 kg, Spindle: MK4 Clamping area: 1200 x 500 Clamping slots: Number 3, width 18, spacing 125 Iodpfezuarmox Ahysih Maximum drilling capacity: for St 60 steel: 32 mm at 0.2 mm/rev for GG 20 cast iron: 45 mm at 0.2 mm/rev

Condition: used, Year of construction: 2004, machine/vehicle number: 2177/03/9604014, Press capacity: 160 ton Isdpfxsuqdzdj Ahyeih Ram stroke adjustable: 20 - 130 mm Slide adjustment: 100 mm Daylight: 560 mm Table surface area : 1500 x 800 mm Slide area: 1400 x 800 mm Number of strokes: 20 - 60 s.p.m. Distance between the columns F - B: 520 mm Height over floor approx.: 3550 mm Required power: 48 kW Weight of machine approx.: 26 ton Standard configuration Control system SIEMENS S7 Extended machine accessories Automation PME feeding unit consisting of decoiler and feed / straightening unitDecoilerLoad capacity 2 tStrip width 400 mmMaterial thickness 0.5 - 4.5 mmCoil outer diameter 1800 mmSpreading range 470 - 630 mmHydraulic expansion of the spreadHydraulic pressure armElectronic feed / straightening unitMax. strip width 400 mmMax. material passage 410 mmMaterial thickness 0.5 - 4.5 mmCross-section 1200 mm²Number of straightening rollers 7Straightening roller diameter 80 mmNumber of feed rollers 2Pneumatic lifting of feed rollersFeed speed 50 m/minFeed length 0 - 10 m

Condition: used, Year of construction: 1997, machine/vehicle number: 150069, Press capacity: 125 ton Isdpfx Ahjuqdhweysih Ram stroke adjustable: 30 - 120 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 450 mm Free frontal opening L-R: 1.290 mm Free lateral opening F-B: 450 mm Table surface area : 1.250 x 800 mm Slide area: 1.250 x 650 mm Hole in table: 1.050 x 260 mm Number of strokes: 30 - 220 s.p.m. Table height over floor: 1.200 mm Required power: 39 kW Height over floor approx.: 3.800 mm Dimensions L x W x H: 3.500 x 2.200 x 3.800 mm Weight of machine approx.: 21,5 ton Standard configuration electrical overload protectionpneumatic clutch2 connecting rodsPLC Siemens S5 Extended machine accessories Strip shear AI 40max. shear force 10tSheet thickness max. 4 mmSheet width max. 400 mmCross section 600 mm2 Automation Kaiser Feeder KWV 400max. sheet width 400 mm

Condition: used, Year of construction: 2021, machine/vehicle number: A2536805, pressing force: 40 t, pressure:40 t stroke:250 mm Iijdpfx Ahefxyhfeyjh return capacity:6,3 t motor:5,5 kw Max Working height:450 mm :90 mm/sec. :10 mm/sec. spindle stroke:250 mm pestle plate:500 x 200 mm table plate:600 x 650 mit T-Nuten mm Table cut-out:200 x 170 mm table height:850 mm :200 l

Condition: used, functionality: unexamined, Optronis Cyclone-25-150-M – Industrial High-Speed Camera For sale is an Optronis Cyclone-25-150-M, a high-quality industrial high-speed camera for professional applications. The camera features a 25-megapixel sensor with 5,120 × 5,120 pixels and enables recordings with up to 150 frames per second. Thanks to its global shutter, it is particularly suitable for capturing and analyzing fast-moving objects without motion distortion. Technical features: Model: Optronis Cyclone-25-150-M Resolution: 25 megapixels Sensor resolution: 5,120 × 5,120 pixels Frame rate: up to 150 frames/second Type: Monochrome / Black and White Global shutter Interface: CoaXPress Professional industrial camera / Machine vision Iiodszwcmxjpfx Ahyoh Suitable for applications such as industrial image processing, quality control, metrology, research, automation, and high-speed imaging. Sold as a used item. Please refer to the photos and description for the condition and scope of delivery.

Condition: refurbished (used), Year of construction: 1976, Work table 500mm x 1200mm Arm travel distance 600mm Tool holder MK 4 Drilling capacity 32mm in steel Thread cutting device Coolant device Electronics 24V control voltage Emergency stop 2-channel Safety device on the drill Iisdewnn S Repfx Ahyoh Completely overhauled in 2025 12 months warranty New paint RAL 7035/7031

Condition: used, Year of construction: 1994, functionality: fully functional, table length: 950 mm, table width: 650 mm, pressing force: 50 t, stroke length: 51 mm, Bruderer BSTA 50EL - Tool loading area 950mm L-R - Machine will be mechanically overhauled Isdpfxezkk Azj Ahyjih - Roll feed BBV 202/120 Please contact us for a detailed quotation!

Condition: ready for operation (used), A total of 10 deionization devices Keyence are available. Ion generation: +/-7000V, ion balance: +/-30V, max. effective range: approx. 3000mm, working distance range: 50mm-2000mm, electrode material: tungsten, applications: plastics/films/coating/electronics/packaging. Documentation available. An on-site inspection is possible. Isdpsw R U Agjfx Ahyoih

Year of construction: 1996, condition: used, pressure 80 t stroke 8-140 mm no. of strokes 105 Hub/min ram - range of adjustment 100 mm table surface area 900x625 mm ram surface 600x280 mm hole in the table Ø 150 mm table height 1000 mm tool hole in ram Ø 40 mm Iiedpfxjrc Ipns Ahyoh 490 mm weight of the machine ca. 7 t dimensions of the machine ca. BxTxH 1800x2200x2600 mm

Year of construction: 2015, condition: excellent (used), Hobart high speed steamer Model: 305GB Serial: 97-0215-148 2015, high speed steamer cooks 42 portions of salmon in 1 minute or 66 portions of tenderstem broccoli in 30seconds, offering exceptional accelerated cooking techniques, LED display, auto defrost, 27Kw, on mobile tray cooling rack, 3Ph Iisdpfefv Spcsx Ahyeh

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, punching force: 25 t, Bruderer BSTA 250-75B with BBV 190/85H - B-Control, year of mfg. 2006 - Tool area 750mm - Adjustable stroke 13 to 38mm - complete documentation - Machine checked, in very good condition! Iedpfx Aszlqhmshyeih contact us!

Condition: used, Year of construction: 1979, functionality: fully functional, thread length: 77 mm, overall weight: 2,268 kg, workpiece diameter (max.): 8 mm, type of input current: AC, Vibratory Bowl Variable Speed Pulley Used #10 Dies Iiodpfeztr Nujx Ahyoh

Condition: refurbished (used), Repair of the tachometer circuit board for various models. Iijdpfjy Rfzusx Ahyjh Please contact us if the gear stages are no longer functioning correctly as intended.

Condition: new, Year of construction: 2026, drilling capacity: 40 mm, throat depth: 1,220 mm, spindle speed (min.): 110 rpm, spindle speed (max.): 2,900 rpm, overall weight: 1,710 kg, spindle stroke: 200 mm, spindle mount: MK 4, Drilling capacity in St 60 40 mm Drilling capacity in GG 20 40 mm Thread cutting (St 60 / GG 20) M 27 / M 36 Tool holder short spindle MK 4 Projection center spindle / column min. - max. approx. 210 - 1220 mm Clamping surface machine table approx. 1200 x 510 mm T-slots in the machine table: Number x width 3 x 18 mm Distance drill spindle - table min. - max. approx. 375 - 675 mm Distance drill spindle - base plate (= option) min. - max. approx. 1075 - 1375 mm Spindle stroke approx. 200 mm Feed rates approx. (4) 0.08 - 0.1 - 0.2 - 0.3 mm / U Speed range of the main spindle: infinitely variable 110 - 2900 rpm Ijdpstzkmbjfx Ahyeih Dimensions (height x width x depth) approx. 2500 x 1200 x 1710 mm Net weight approx. 1710 kg Drive power spindle motor 400 V, 50 Hz approx. 2.2 / 4.0 kW

Condition: new, New High speed press from min. 63t up to max. 630t. We offer new mechanical and hydraulic presses for various applications, individually tailored to your needs. Give us your requirements and we will make an attractive offer with installation and service. ISGEC has delivered to more than 26 countries in recent years, including Thailand, Indonesia, Vietnam, USA, Germany, Spain, France, Brazil, Hungary, Mexico, Bangladesh and over 200 presses to 40 Japanese customers. We are proud to be official sales partner since 2020 and look forward to hearing from you. Isdpfsgayiasx Ahyjih

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, table length: 950 mm, table width: 650 mm, pressing force: 50 t, stroke length: 51 mm, Bruderer BSTA 50UL - Tool loading area 950mm L-R - Machine will be mechanically overhauled Isdpjzkkxcjfx Ahyoih - Roll feed BBV 202/120 Please contact us for a detailed quotation!

Condition: used, Machine has a defect in the main spindle CNC vertical machining center CHIRON type FZ 22 L high speed Machining center with CNC control FANUC Series 21-M serial no. 179-98 year of construction 1999 Travel X: 2000 mm, Y: 520 mm, Z: 630 mm Table size 2700 x 570 mm Table load 525 kg (per meter) Tool holder SK 40 (DIN 69871) Drilling capacity 35 mm Iedpfsquhbgsx Ahyoih Tapping capacity M27 Tool diameter 75 mm Diameter with free secondary positions 105 mm Tool change speed tool - tool 2.0 sec. Tool change speed from chip to chip 4.8 sec. Distance spindle nose - table 190 to 820 mm Spindle speed max. 10,500 rpm Main spindle drive max. 18.5 kW Mains connection 400 Volt, 50 Hz, 32 kVA - Pendulum machining over 2 work areas (partition wall missing) - CNC control FANUC Series 21-M - Tool changer 40-fold - IKZ = internal coolant supply through the spindle - Spray protection cabin with sliding door - Indirect measuring system - Coolant device with chip conveyor opposite - Electronic handwheel Transport dimensions of the basic machine L x W x H 4600 x 2470 x 2950 mm Weight of the machine approx. 7.5 tons. Transport space requirement on the truck L x W x H 12000 x 2470 x 2950 mm Transport Weight on the truck approx. 10 ton. Weight 7.2 tons. good condition - machine has a defect on the main spindle