Used High Speed Spindle for sale (49,283)

Condition: used, Year of construction: 1997, Pressure total: 315 ton Ram stroke: 160 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 1.050 mm Free frontal opening L-R: 2.740 mm Free lateral opening F-B: 1.500 mm Hodpfxovmfzhs Ab Uofn Distance between oil tray: 2.400 mm Table surface area : 2.740 x 1.800 mm Slide area: 2.400 x 1.700 mm Number of strokes: 10 - 60 s.p.m. Required power: 75,5 kW kW Working hours machine: 77.341 h Height over floor approx.: 5.500 mm Dimensions L x W x H: 5.400 x 3.300 x 5.700 mm Weight of machine approx.: 80 ton Control: Siemens S5 Standard configuration hydraulic tool clamping device Extended machine accessories Tool changing cart

Condition: used, Comprehensively tested and refurbished, used Winkworth model model RT400 stainless steel high speed ploughshare (T-Arm) mixer. Manufacturer: Winkworth Material: Stainless steel Year of Manufacture: 2016 Capacity: 400 litre (product dependent) Mixing trough: 1,300mm long x 800mm diameter. Type Of Blades: T-Arm ploughshare blades with drive/gearbox. Specifications: Bowl Volume: 105.7 gal Material Of Construction: Stainless steel Hjdpeymayisfx Ab Ujfn Dimensions: 1300mm long x 800mm diameter

Condition: used, Year of construction: 1986, machine/vehicle number: 131234, Press capacity: 63 ton Ram stroke adjustable: 8 - 60 mm Slide adjustment: 80 mm Shut height (stroke down, adjustment up): 300 mm Table surface area : 810 x 550 mm Slide area: 700 x 420 mm Hole in table: 550 x 140 mm Distance between oil tray: 700 mm Table height over floor: 920 mm Number of strokes: 65 - 400 s.p.m. Weight of machine approx.: 8 ton Dimensions L x W x H: 2935 x 1170 x 3000 mm Main Motor: 11 kW Extended machine accessories Hfedpow Tuqpefx Ab Uen Die lifters with balls for die change IMCO Press force measurement Automation Grip Feeder, Type ZR 250Max. Sheet width 250 mmFeeding length 210 mm

Condition: ready for operation (used), Travel X/Y/Z: 650mm/400mm/425mm, table dimensions X/Y: 545mm/540mm, max. table load: 500kg, speed: 10000rpm, tool stations: 20, rapid traverse: 30m/min, feed rate: 20m/min. Machine dimensions X/Y/Z: approx. 3400mm/2100mm/2800mm, weight: approx. 5500kg. On-site inspection is possible. Hjdeycwrbepfx Ab Uefn

Condition: refurbished (used), Year of construction: 1980, Worktable 500mm x 1200mm Arm travel 600mm Tool holder MK 4 Hjdpfxex N Ih Ie Ab Ujfn Drilling capacity 32mm in steel Thread cutting device Coolant system Safety device at the drill Completely overhauled in 2026

Condition: used, Single-column hydraulic press EXNER Type EEX 20 S - Machine no.: 1615 Year of manufacture: 1980 - Pressing force: 20 tons - Throat depth: 180 mm - Table size: 380 x 350 mm - Table opening: Ø 50 mm - Ram surface: 310 x 250 mm - Clamping shank: Ø 35 mm - Ram stroke: 100 mm - Max. installation height: 250 mm - Table height above floor: 900 mm - Descent speed: approx. 480 mm/s - Return speed: approx. 480 mm/s - Working speed: 20 mm/s - Hydraulic tank capacity: 110 liters - Hydraulic operating pressure at 20 tons: 200 bar - Motor output: 4 kW - Power connection: 400 Volt, 50 Hz Hfjdsyz Dtdspfx Ab Ujn - Stroke release via two-hand control or light barrier - Operating modes: setup, two-hand operation, BWS - SICK light curtain, type LVU, with single- and double-stroke settings and safety function - Rapid approach and working stroke - Stroke limitation dependent on pressure or travel - Mechanically adjustable solid stop - Press force adjustment manually via knurled wheel - Control cabinet mounted on the side of the machine - Operating manual and electrical schematics included - Stroke counter - Space requirement (L x W x H): 1250 x 750 x 2000 mm - Weight: 1.4 tons In good condition

Condition: good (used), Speed head up to 30.000 rpm Hfodpfjzk U Stjx Ab Ujn

Condition: used, Year of construction: 1998, pressure 160 t stroke 30 - 90 mm no. of strokes 50 - 300 /min distance between columns 1270 mm dayligth (stroke and adjustment up) 590 mm column travel -side 440 mm table surface area 1250 x 900 mm hole in the table 950 x 300 mm Hsdpfx Aszrpqyeb Usfn ram surface 1250 x 800 mm ram adjustment 100 mm material width 200 mm material thickness - 6,0 mm feed length 0 - 120 mm power requirement 64,5 kW Weight 21,00 t dimensions of the machine ca. 3,0 x 2,2 x 3,9 mxmxm with infinitely variable drive, hydraulic clutch/brake combination (make Desch), automatic stroke adjustment, motoric ram adjustment, fix table, circular oil lubrication mechanical roll feed Bruderer BBV 205/120 with drive via main shaft / pivot shaft of the press consoles Guethle CK 01/0800

Condition: used, Year of construction: 1987, functionality: unexamined, pressing force: 20 t, stroke length: 38 mm, overall weight: 3,600 kg, BSTA 20 H press, with BBV 190/85 roll feed on left-hand side, Year of mfg. 1987 Adj. stroke 8 to 38 mm Nominal capacity 20 tons Max. tool loading width 420 mm For spare parts or overhaul/repairs. Hjdpfx Absw S E Tlo Uefn Sold in "as is" condition. Available immediately ex-stock. Please contact us for more information!

Condition: excellent (used), Year of construction: 2010, operating hours: 9,416 h, functionality: fully functional, feed length X-axis: 535 mm, feed rate Z-axis: 3,845 m/min, turning diameter over cross slide: 630 mm, turning diameter: 950 mm, turning diameter over top slide: 630 mm, spindle bore: 254 mm, spindle speed (max.): 630 rpm, total height: 1,850 mm, total width: 2,105 mm, Hankook Protec 9NC Hollow Spindle Oil Country Lathe Model: Protec 9NC Control: Fanuc 21i-TB Year: 2010 Hsdpfx Asz S Nc Usb Uefn Spindle Bore: 254mm Capacity: 950 x 4000mm Swing Over Cross Slide: 630mm Spindle Speeds: To 630 RPM (2 Ranges) Main Motor: 37 KW Machine With: Double 4 Jaw Manual Chucks (front or rear) Duplomatic 8 Station Turret 2 x Fixed Steadies

Condition: new, The Matrix Fast 500 is the latest in the Stromab range of automatic crosscutting machines, with a high speed upstroke saw action which depending on cutting paterns can give up to 40% more production than the standard machine. The machine is primarily designed for programmable and repetitive cutting from standard and / or random lengths of timber. The new high speed pneumatic saw unit with variable speed control, can also be set to limit the saw stroke when cutting smaller boards, helping to increase production even further. The pusher is fitted with a heavy duty rack and pinion drive feeding system, for fast and accurate positioning giving a high level of repeat cutting accuracy, the pusher is raised with a pneumatic cylinder forits return to its loading position, allowing the operator to prepare the next pack of timber on the table without having to wait for the pusher to return to its idle position. The infeed and outfeed tables are of all steel construction meaning even heavy sections or packs of timber can be processed. The saw unit and clamping area is totally enclosed by a clear hinged electrically interlocked hood that while allowing the operator a clear view of the cutting area still gives complete protection. additional safety features include full length guarding of the rear of the pusher system, whilst there is a safety pull cord running along the length of the front infeed table. Programming and entering of cutting lists is simple with the on board Top 12 control unit. With a 12" colour touch screen display, offering a modern, robust and reliable control system with many innovative features and is ideally suited for a factory or workshop environment. As standard the machine now offers USB, ethernet and 3 levels of optimisation including "board sequence" ideal for repetitive cutting. The Matrix OPTI version offers an additional 3 optimisation criterias including "minimum waste" and automatic board length measuring suitable for random length boards. The Matrix DEFECT version offers all optimisation criterias, length measuring, a defect removal camera and timber grading. Additional options also include extended outfeed table, pneumatic side roller pressure, label and inkjet printing. To date we have supplied over 250 Matrix saws in to the UK, with a number of customers installing several machines. Specification Self braking motor 10hp Hfjdpfob Tmwajx Ab Usn Saw blade diameter 500mm Max cutting width 390mm ( refer to chart ) Max cutting height 150mm ( refer to chart ) Pusher unit 3000 to 15000mm Precision rack and pinion drive giving a high level of repeat cutting accuracy. Pneumatic rising of the pusher at the end of cutting cycle Positioning speed 100m/min Positioning accuracy + /- 0.2mm Elco TOP 12 control unit Touch screen with 12" colour display 1m outfeed table Dust outlets 2 x 100mm diameter

Condition: used, Year of construction: 1976, Force: 160 tons Windows: 600mm Daylight: 420mm Ram adjustment: 80mm Table size: 1100x1100mm Ram size: 1030x800mm Hole in table: 680x250mm Stroke adjustable: 30-100mm Strokes per Minute: 40-1800 Power requested: 18,5KW, weight: 20 tons, height 3950mm Hfsdpfx Abecna Hfs Ujn Siemens control, ALBA roll feeder material 400x3mm

Condition: new, NEW machine, end-of-series Hfedpfsxmhfljx Ab Uon Pit Stop D2H HIGH SPEED double-head creasing and perforating machine, equipped with 2 standard creasing kits (for Head A and Head B) and mobile wheels. The second head, unlike the first, operates from bottom to top. All creasing and perforating tools can be installed on this second head. This allows creasing and perforating to be performed in a single pass; or, by fitting two creasing tools, it is possible to perform creases from both the top and the bottom in one pass, ensuring the correct crease orientation for zig-zag folding. High-performance creasing machine with a maximum output of up to 14,000 sheets per hour. Easy-to-use controls allow for up to 100 creases or perforations per sheet and a memory capacity of up to 200 jobs. The machine can crease, perforate, and punch, making it ideal for WIRE-O binding and calendar production. This end-of-series machine can be equipped with the following optional tools: - Digital creasing kit (for both Head A and Head B) - Perforation kit 2/1-3/1-4/1 (for both Head A and Head B) - Micro-perforation kit (for both Head A and Head B) - 100 cm extension - Punching kit in various sizes Technical data: Min./max. sheet size: 8×10 cm / 50×70 cm (with optional extension 50×100 cm) Paper weight: 80 to 600 g/m² Programming: 200 programs (100 operations per program) Minimum crease distance: 0.1 mm Production speed in A4: 14,000 sheets/hour (with 1 crease) Power supply: 400 Volt three-phase + neutral, 50 Hz

Condition: used, functionality: unexamined, High-speed doors in various sizes, used and dismantled, price per door: €100.00 Hfsdpfx Ajynnv Isb Ujn

Condition: good (used), High-speed counter 25/500 kHz, PLC control, counter module, counter assembly -Manufacturer: Siemens, Simatic S5 High Speed Counter 25/500 kHz -Type: 6ES5 385-8MB11 Hfjdpfx Aoh Db H Dsb Ujn -Number: 1 modules available -Price: per piece -Dimensions: 100/45/H135 mm -Weight: 0.2 kg/pc.

Condition: used, Year of construction: 1990, machine/vehicle number: 131 542, Press capacity: 40 ton Ram stroke adjustable: 8 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 290 mm Free frontal opening L-R: 600 mm Free lateral opening F-B: 190 mm Table surface area : 600 x 500 mm Slide area: 600 x 400 mm Hole in table: 500 x 110 mm Number of strokes: 65 - 400 s.p.m. Table height over floor: 1100 mm Required power: 32 kW Height over floor approx.: 2.800 mm Weight of machine approx.: 6,2 ton Hsdpfxjuqc Ezs Ab Usfn Extended machine accessories 2002 a roll feeder was installed Modell MWVL-200, YOM 2002

Condition: used, Year of construction: 1980, machine/vehicle number: 130861, Press capacity: 50 ton Ram stroke: 54 mm Slide adjustment: 80 mm Shut height (stroke down, adjustment up): 303 mm Table surface area : 810 x 550 mm Number of strokes: 65 - 400 s.p.m. Weight of machine approx.: 7,5 ton Hfedjuqc Hljpfx Ab Ujn Main Motor: 11 kW Extended machine accessories IMCO Press force measurement Automation Grip Feeder, Type ZR18ZT1Max. Sheet width 180 mmFeeding length 150 mm

Year of construction: 1976, condition: good (used), machine/vehicle number: H 76-467, Pressing force: 160 kN Ram stroke: 100 mm Installation height: 350 mm Hole in the table: 100 mm Ram bore: 32 mm Stand passage: 650 mm Table size: 630 x 400 mm Hydraulic pressure: 280 bar Hedpfx Aeflrhzob Uefn electr. Connection: 380 V, 5.5 kW Space requirement: 1550 x 1050 x 2400 mm Weight approx .: 1,2 t

Condition: excellent (used), LECEB S300 HIGH SPEED MOULDER INFEED CAPABLE OF FEEDING LONG AND SHORT BOARDS AT HIGH SPEED UP TO 3OOM/MIN+ SUITABLE FOR FEEDING SHORT LENGTHS DOWN TO 2.05M WITHOUT LOSS OF EFFICIENCY SUITABLE FOR LENGTHS UP TO 6.0M SUITABLE FOR THICKNESS FROM 8MM+ Hsdpfxozmmrqo Ab Ujfn SUITABLE FOR RECEIVING RESAWN BOARDS WHICH CAN BE AUTOMATICALLY LOADED TO THE MAGAZINE FOR HIGH SPEED FEEDING VERY SUITABLE FOR USE IN BETWEEN SPLITTING SAW MOULDER (OR RESAW) AND HIGH SPEED MOULDER

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, actuation type: electric, overall weight: 10,000 kg, input voltage: 380 V, input frequency: 50 Hz, feed length X-axis: 120 mm, feed length Y-axis: 200 mm, feed length Z-axis: 170 mm, GB-A1500 Fully automatic high-speed bending center Bending length (mm): 1500 Bending height (mm): 4side160 4side170/2side350 4side350 Minimum molding size: (Fold 4 sides) (mm) 4 sides 160: 350*250 4 sides 170/2 sides 350: 350*250 4 sides 350: 350*250 Maximum bending size (mm) 1500*1500 X-axis travel: 120 Y axis travel: 4 sides 160: 200 4 sides 170/2 sides 350 305 4 sides 350: 305 Z-axis travel: 4 sides 160: 170 4 sides 170/2 sides 350: 357 4 sides 350: 357 Pressing knife height: 4 sides 160: 177 4 sides 170/2 sides 350: 177 4 sides 350: 357 Number of axes: suction cup: 11 Pressure arm: 14 Machine power (KW) suction cup: 34.7 Pressure arm: 36.35 Maximum bending thickness of aluminum plate (mm): 3 Maximum bending thickness of iron plate (mm): 2 Maximum bending thickness of stainless steel (mm): 1.5 Maximum bending speed (s/knife) : 0.2 Overall dimensions (mm) long (front) 4 sides 160: 1890 2-4 sides 350 suction cups: 1890 2-4 sides 350 pressure arm: 1890 Width (side) 4 sides 160： 3300 2-4 sides 350 suction cups：3536 2-4 sides 350 pressure arm: 4127 4 sides 160: 2666 2-4 sides 350 suction cups: 2946 2-4 sides 350 pressure arm: 2946 Weight (approx. kg) 4 sides: 160 2-4 sides 350 suction cups: 10000 2-4 sides 350 pressure arm: 10000 1) Machine frame is heaviest welded con struction,stess released by annealing process,this has minimized deflection of the frame. 2) Y Axis full closed loop control 3) Proportional hydraulic compensation system to prevent deformation 4) German HEIDENHAIN linear encoder 5) Taiwan HIWIN ball screw and linear guide rail ,high performance AC Japanese Yaskawa AC servo motors and drives Hfodpfx Aov Ikvgob Ujn 6) Rich functions CYBELEC/DELEM professional control system 7) Electro-hydraulic servo synchronization module and Greman BOSCH pressure module 8) +/-0.01mm repeat accuracies 9) +/-0.01mm parallelism accuracies

Condition: used, total length: 1,700 mm, total width: 1,000 mm, total height: 2,100 mm, Year of manufacture: 2001 Colour: Grey Hfedpfxsymlahe Ab Uen - Details: - └ Description: Readout positioning does not work properly. Price AS-IS - Year: 2001 - CE marking present: Yes - Serial number: AB/143039 - Spindle diameter [mm]: 40 - Table length [mm]: 1195 - Table width [mm]: 350 - Feeding device present: Yes - Guide present: Yes - Tool key included: Yes - Spindle speed: Manual - Voltage [V]: 400 - Current consumption [A]: 12 - Fuse [A]: 20 - Transport dimensions: 1700mm x 1000mm x 2100mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1998, machine/vehicle number: 10870, Press capacity: 50 ton Ram stroke adjustable: 16 - 51 mm Slide adjustment: 64 mm Free frontal opening L-R: 1100 mm Free lateral opening F-B: 250 mm Table surface area : 1080 x 650 mm Slide area: 980 x 420 mm Hole in table: 1060 x 200 mm Number of strokes: 100 - 750 s.p.m. Hfedpfx Abjuqd Abe Usn Required power: 22 kW Working hours machine: 16850 h Height over floor approx.: 2471 x 1278 x 3150 mm Weight of machine approx.: 9 ton Standard configuration BRUDERER precision roller feed BBV 205 / 120

Condition: used, Year of construction: 1983, Bruderer BSTA 50 HL with BBV 202/120 Available, delivery time on request CE conversion possible. Hfjdpfxozlqg As Ab Usn Contact us!

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 685 mm, travel distance Z-axis: 630 mm, controller model: Siemens 840D, rotational speed (max.): 20,000 rpm, The machine spindle was replaced in 2022! The original purchase price of the machine was EUR 600,000! TECHNICAL DETAILS Travel range X-axis: 2000 mm Travel range Y-axis: 685 mm Travel range Z-axis: 630 mm Rapid traverse on all axes: 40 m/min Axis acceleration: 0.25 g Max. spindle speed: 20,000 rpm Max. rotary table speed: 1,000 rpm Hsdpfxeymnykj Ab Uofn Tool changer positions: 92 Tool holder: HSK 63 NC swiveling axis: ± 100° MACHINE DETAILS Control: Siemens 840D EQUIPMENT Remote diagnostics and teleservice Maintenance instructions displayed on screen 5-axis milling package Fixed table with integrated rotary table Kessler milling rotary table DTE 520 NC swiveling head with spindle stock Direct measuring systems Chip conveyor (hinged belt) Coolant system HL 450 / 900 (IKZ) Full-flow cleaning via paper band hydrostatic filter HL450 Coolant filtration 50 µm nominal Chip blow gun Coolant recooling unit Additional tray rinsing Machine preparation for air through spindle Work area extraction system Safety package MILL 2000 with reinforced cabin and safety glass Zero point clamping system NSL tur 570-5-Z for DTE 520 Tool breakage monitoring Measuring probe Renishaw OMP 40-2LS Rotating inspection window Chiron Power Service Siemens CNC control with OP019 19" color display Operating mode: 4 MCIS DNC for sending and receiving CNC programs in network operation Siemens tool life monitoring Measurement in JOG (zero point determination during setup in jog mode) Loading and unloading station for tools for main time parallel tool change on background magazine Additional window for background magazine Swiveling control panel for optimal visibility of the work area during setup Note: The two vices on the NC rotary table as well as the tool holders in the tool changer are not included in the offer.

Condition: used, Year of construction: 1987, machine/vehicle number: 87 / 906, pressure:63 t stroke:8 - 80 mm no. of strokes:60 - 300 Hub/min distance between columns:720 mm table surface area:710 x 700 mm hole in the table:345 x 100 mm column travel -side:320 x 200 mm ram surface:500 x 400 mm ram adjustment:80 mm throat:350 mm dayligth:250 / 275 mm feed length:220 mm table above floor:1000 mm total power requirement:9,2 kW Hfsdpfecxxpcjx Ab Ujn weight of the machine ca.:6,5 t