Used High Speed Cutter for sale (49,035)

Condition: new, functionality: fully functional, power: 3 kW (4.08 HP), Year of construction: 2025, Equipment: air conditioning, cooling unit, G16 Type: Two chucks Ihedpfx Aswz Ufwoh Nst

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Laser power: 3KW, 6KW, 12KW Standard hardware: waste car, fully automatic butter injection, dual-control workbench, adaptive multi-angle site placement, beam light curtain Optional hardware: fire bricks, high-pressure proportional valve (standard for 6KW and above), safety door lock, Independent laser cabinet, rear exchange table light curtain, rear lifting light barrier, Rear camera, internal camera, monitoring display, radiation-proof glass, upper cover fan, upper cover, partition dust removal Isdpjwz Ukyofx Ah Neht

Condition: ready for operation (used), Year of construction: 2018, controller manufacturer: HEIDENHAIN, controller model: iTNC640, spindle speed (max.): 42,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 32, This 5-axis OPS INGERSOLL High Speed Eagle V5 was manufactured in 2018. It features a Heidenhain Control TNC 640, a high-frequency spindle with a speed range up to 42,000 rpm, and a 32-slot HSK-E40 tool changer. The machine offers a traversing speed of 30m/min and traversing paths of 550x400x400 mm. If you are looking to get high-quality milling capabilities consider the OPS INGERSOLL High Speed Eagle V5 machine we have for sale. Contact us for more information. • Max. acceleration: 15 m/s² • Max. traversing speed: 30 m/min • Control cabinet ambient temperature: up to 33 °C (with heat exchanger) • Traversing paths (X/Y/Z): 550 x 400 x 400 mm • Drive system: Ball screw spindles with directly coupled AC servo motors • Measurement system: Absolute glass scales on all axes Ijdpjx D Ektefx Ah Neht • Torque (S6 60%): 6.7 Nm

Condition: ready for operation (used), Year of construction: 2017, operating hours: 8,269 h, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 640 HSCI, total height: 2,450 mm, table load: 250 kg, overall weight: 7,200 kg, spindle speed (max.): 42,000 rpm, number of axes: 5, This 5-axis OPS INGERSOLL Eagle V5 was manufactured in 2017, featuring a robust vertical machining center design. It boasts a high-speed Fisher HSK E40 spindle with speeds up to 42,000 rpm and a 32-tool magazine. The machine includes a 4/5-axis tilting rotary table, enhancing its versatility for complex machining tasks. Consider the opportunity to buy this OPS INGERSOLL Eagle V5 vertical machining center. Contact us for more information about this machine. Additional equipment • 4/5-axis Tilting Rotary Table prepared for Pallet System • B-axis Tilting Range: −120° to +60° • C-axis Rotation: 360° • B-axis Speed: 25 rpm • C-axis Speed: 20 rpm • Keller Dust Extraction System • EROWA UPC Production Chuck Clamping System • Tool Length and Diameter Laser Measurement, Broken Tool Detection • Touch Probe (Renishaw) Isdpoyaqf Nsfx Ah Neht • Precision Pack III – 5-axis Thermal Compensation Machine Benefits Technical Machine Benefits • Spindle-to-table distance (min/max): 50–450 mm • Table design: fixed dimensions: 650 × 500 mm • T-slots: 5 × 14h12 • Torque (s1/s6 - 60%): 5. 9 nm / 6. 7 nm • Tool magazine capacity: 32 • Max. Workpiece size: Ø400 × 380 mm Extra Information ECOTEC Energy-saving Function Table Adapter for 4th and 5th Axes HR410 Wireless Remote Control EROWA UPC Basic Chuck with EROWA ITS100 Adapter Dimensions Machine Depth 2800 mm

Condition: used, Year of construction: 1997, pressure 130 t distance between columns 1600 mm stroke 8 - 140 mm Iedpfxsvuugcs Ah Neht no. of strokes 50 - 200 Hub/min dayligth (stroke and adjustment up) 520 mm column travel -side 610 mm table surface area 1600 x 880 mm hole in the table 1000 x 350 mm table height over floor 950 mm ram surface 1600 x 880 mm power requirement 24,2 kW weight of the machine ca. 28,00 t required space 4,3 x 2,2 x 3,8 m ram adjustment 100 mm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, hydraulic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, automatic stroke adjustment, electronic roll feed (Hensel, EVX 500) with hydraulic intermittent lifting 2025 - in progress: new electrical (safety) control - Siemens S7-1500 F, easy operation via touch-panel Video at seller's site before dismantling available

Condition: used, Year of construction: 1988, pressure 200 t Isdpfsvut S Dox Ah Neht stroke 30 - 160 mm no. of strokes 40 - 120 /min distance between columns 1500 / 1300 mm dayligth (stroke and adjustment up) 860 mm column travel -side 600 x 530 mm table surface area 1250 x 1250 mm hole in the table 550 x 300 mm table height over floor 1000 mm ram surface 1250 x 1000 mm ram adjustment 125 mm material width 30 - 500 mm material thickness 0,5 - 3,0 mm feed length 0 - 999,9 mm power requirement 50,0 kW Weight 34,00 t dimensions of the machine ca. 4,0 x 1,7 x 5,2 mxmxm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, automatic stroke adjustment

Condition: used, Year of construction: 1998, pressure 160 t stroke 30 - 90 mm no. of strokes 50 - 300 /min distance between columns 1270 mm dayligth (stroke and adjustment up) 590 mm column travel -side 440 mm Isdpevut Uxefx Ah Njht table surface area 1250 x 900 mm hole in the table 950 x 300 mm ram surface 1250 x 800 mm ram adjustment 100 mm material width 200 mm material thickness - 6,0 mm feed length 0 - 120 mm power requirement 64,5 kW Weight 21,00 t dimensions of the machine ca. 3,0 x 2,2 x 3,9 mxmxm permitted for automatic mode according to the CE-Norm with infinitely variable drive, hydraulic clutch/brake combination (make Desch), automatic stroke adjustment, motoric ram adjustment, fix table, circular oil lubrication mechanical roll feed Bruderer BBV 205/120 with drive via main shaft / pivot shaft of the press consoles Guethle CK 01/0800

Condition: used, Year of construction: 1976, pressure 200 t distance between columns 1550 mm stroke 30 - 160 mm no. of strokes 30 - 90 Hub/min dayligth (stroke and adjustment up) 745 mm column travel -side 800 mm table surface area 1500 x 1150 mm hole in the table 450 mm table height over floor 810 mm ram surface 1500 x 1000 mm Isdjvuubaepfx Ah Nsht power requirement 38,0 kW weight of the machine ca. 26,5 t required space 5,1 x 1,6 x 3,7 m ram adjustment 110 mm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 1986, pressure 160 t stroke 20 - 120 mm no. of strokes 20 - 120 /min distance between columns 1300 mm column travel -side 520 mm dayligth 570 mm table surface area 1250 x 900 mm hole in the table 900 x 250 mm table height over floor 1000 mm ram surface 1100 x 700 mm ram adjustment 100 mm material width 20 - 320 mm Ijdpevut Rtsfx Ah Nsht material thickness 0,3 - 4,0 mm feed length 1,0 - 9999,99 mm power requirement 18,5 kW weight of the machine ca. 25,0 t dimensions of the machine ca. 3,0 x 2,3 x 3,7 mxmxm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination, electro-hydraulic overload protection, automatic stroke adjustment, motoric ram adjustment, pneumatic counterbalance in ram, motoric centralized circular lubrication electronic roll feed make Kaiser type KWV 320 Z, yom 2000 with hydraulic intermediate lifting of the rolls

Condition: used, Year of construction: 1978, pressure 150 t Ijdpfxjvut Ure Ah Nsht stroke fix 80 mm no. of strokes 30 - 150 /min distance between columns 930 mm dayligth (stroke and adjustment up) 400 mm column travel -side 650 mm table surface area 880x1300 / 1500x600 mm hole in the table 760 x 180 mm table height over floor 1270 mm ram surface 920x1000 / 1300x600 mm Weight 27,5 t dimensions of the machine ca. 3,1 x 1,8 x 4,3 mxmxm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination, fix stroke, motoric ram adjustment, pneumatic counterbalance in ram, centralized lubrication, WITHOUT feeder as is where is, WITHOUT putting into operation Price for commissioning (with new electric control) on request

Condition: used, Year of construction: 1996, pressure 130 t distance between columns 1220/1070 mm stroke 22 - 96 mm no. of strokes 20 - 120 Hub/min dayligth (stroke and adjustment up) 518 mm column travel -side 600 mm Isdpfx Ahsvuubyo Neht table surface area 1220 x 880 mm hole in the table 450 x 250 mm table height over floor 950 mm ram surface 1180 x 800 mm power requirement 22,0 kW weight of the machine ca. 17,50 t required space 3,7 x 1,75 x 3,55 m ram adjustment 110 mm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, hydraulic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, automatic stroke adjustment, electronic roll feed (Hensel, EVX 500) with hydraulic intermittent lifting

Condition: used, Year of construction: 2004, pressure 80 t stroke 16 - 63 mm no. of strokes 100 - 750 /min distance between columns 970 mm dayligth (stroke and adjustment up) 380 mm column travel -side 380 mm table surface area 940 x 910 mm hole in the table 770 x 190 mm table height over floor 1180 mm ram surface 940 x 510 mm ram adjustment 76 mm material width 203 mm material thickness - 6,0 mm feed length 0 - 120 mm power requirement 37,0 kW Weight 14,50 t dimensions of the machine ca. 2,7 x 1,7 x 3,6 m Ihodpfx Ahsvuua Ns Nst permitted for automatic mode according to the CE-Norm with infinitely variable drive, pneumatic clutch/brake combination, semi-automatic stroke adjustment, motoric ram adjustment, fix table, circular oil lubrication mechanical roll feed Bruderer BBV 205/120 with drive via main shaft / pivot shaft of the press consoles Guethle CK A noise enclosure can be offered optionally - price on request

Condition: used, Year of construction: 1990, pressure 50 t distance between columns 800 mm stroke 4 - 60 mm no. of strokes 30 - 300 Hub/min dayligth (stroke and adjustment up) 400 mm Iodpjvut Husfx Ah Njht column travel -side 350 mm table surface area 780 x 640 mm hole in the table 690 x 140 mm table height over floor 1150 mm ram surface 800 x 460 mm power requirement 26,0 kW weight of the machine ca. 9,00 t required space 2,4 x 1,7 x 2,9 m ram adjustment 80 mm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, automatic stroke adjustment electronic roll feed (PBK, WV 65-DSM 300P, yom. 2007) can be offered without or with putting into operation in given condition - video at seller's site before dismantling available

Condition: new, Year of construction: 2025, pressure 315 t distance between columns 2800 mm stroke fix 35 mm no. of strokes 100 - 250 Hub/min dayligth (stroke and adjustment up) 560 mm column travel -side 600 mm table surface area 2700 x 1200 mm Ihjdpfjxcp Itex Ah Njt hole in the table 2450 x 450 mm ram surface 2700 x 800 mm Weight 80,0 t dimensions of the machine (WxDxH) 5,1 x 2,65 x 5,25 m

Condition: new, Year of construction: 2025, pressure 315 t distance between columns 3800 mm stroke fix 35 mm no. of strokes 100 - 250 Hub/min Ihjdsxcp Imspfx Ah Nst dayligth (stroke and adjustment up) 560 mm column travel -side 600 mm table surface area 3700 x 1200 mm hole in the table 3400 x 450 mm ram surface 3700 x 800 mm Weight 110,0 t dimensions of the machine (WxDxH) 6,1 x 2,65 x 5,6 m

Condition: good (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 75 m/min, rapid traverse Z-axis: 75 m/min, nominal power (apparent): 17 kVA, total height: 2,300 mm, total length: 1,500 mm, total width: 2,600 mm, overall weight: 3,400 kg, spindle speed (max.): 30,000 rpm, spindle nose: HSK40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, CNC machining center CHIRON FZ08 KS Magnum High Speed Plus (HSP) TECHNICAL CHARACTERISTICS: Year of manufacturing: 2007 CNC control : FANUC 18i-MB5 Number of axes : 7 Iedpsx U U Hbsfx Ah Nsht Stroke X axis : 450 [mm] Stroke Y axis : 270 [mm] Stroke Z axis : 310 [mm] Traversing feeds X, Y and Z axes : 75000 [mm/min] Max. bar diameter in turning spindle : 32 [mm] Main spindle max. speed : 8000 [rpm] Main spindle max. power : 12 [kW] Angular A axis stroke : 360 [°] A axis indexing precision : 0.001 [°] B axis swivelling stroke : -20° / +115 [°] B axis indexing precision : 0.001 [°] Spindle type : HSK40 Max. spindle speed : 30000 [rpm] Tool changer magazin number of stations : 40 Part turnaround by robot (6th side machining) : Yes RS232 Interface : Yes Total power required : 17 [kVA] Supply voltage : 400 [V] Dimensions : 1500 x 2600 x 2300 [mm] Weight : 3400 [Kg] More information available upon request.

Condition: used, Year of construction: 1978, 40 1008 rated current 20 A Ihedpfx Ajwg Huneh Not voltage 24 V weight of the machine ca. 3,5 t

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 (MK 4) • Infinitely variable speed control • Infinitely variable quill feed • Thread cutting attachment • Two 18 mm T-slots each on rear and left of machine base • 3-axis digital readout • Machine lamp • Central lubrication • Table top machined all around • Drill guard • Coolant system Dimensions and Travels Tool holder MK 4 Column diameter mm 195 Table size mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column travel mm 450 Distance spindle nose - table top min 40 mm, max 710 mm Distance spindle nose - base plate min 840 mm, max 1510 mm Drilling radius min 540 mm, max 1590 mm Work table height mm 900 Machining Capacities Drilling capacity (solid) St 60 ⌀ 45 mm GG 22 ⌀ 55 mm Tapping St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range min⁻¹ 15 – 2,800 Torque Nm max. 250 Constant from min⁻¹ 15 – 200 Feed Drives Feed, stepless mm/rev 0.02 – 0.7 Feed force N 12,000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Iedpfxjx Uwpxj Ah Njht Weight DANUFLEX 145 (without packaging) with table 750 x 1200 mm kg 2,600 Documentation Operating manual, incl. Lubrication and hydraulic system diagram Electrical wiring diagram

Condition: good (used), Spindle mount BT 50 Collet chuck holder DIN 6388, diameter 2 - 16 mm Gear ratio 1:6 Max. speed 15,000 rpm Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel Ihjdjwz I Tbspfx Ah Njt

Condition: excellent (used), Year of construction: 2016, operating hours: 12,229 h, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed length X-axis: 585 mm, feed length Y-axis: 250 mm, feed length Z-axis: 400 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, nominal power (apparent): 21 kVA, controller manufacturer: Heidenhain, controller model: TNC640, total height: 3,000 mm, total length: 2,370 mm, total width: 2,845 mm, overall weight: 8,000 kg, spindle speed (max.): 42,000 rpm, operating hours of spindle: 2,256 h, number of spindles: 1, number of slots in tool magazine: 90, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, rotational speed infinitely variable, MP7-5 Axis Heidenhain iTNC530i with integrated pallet changer, 36 pallet positions Travel range X/Y/Z: 730 x 250 x 400 mm B-axis travel range: +/- 105 degrees C-axis travel range: infinite Work area X/Y/Z: 585 x 250 x 400 mm Max. workpiece weight: 60 kg Distance: machine table to spindle nose: 450 mm Machine dimensions (W x D x H): 2845 x 2370 x 3000 mm Machine weight: 8000 kg Equipment/Features: Cooling unit Rotary tilt table 160 (B/C-axis) Workpiece measurement: Renishaw OMP400 Tool measurement: BLUM Dynaschine collision controller (DCM) Table chuck: EROWA PowerChuck P 150 Pallet changer 36-fold EROWA ITS50...148 Tool changer: 90 positions for HSK40 MHT media distributor with 3 dosing settings Control system: Heidenhain iTNC530 HSCI FS Milling spindle: Steptec HVC140 Spindle power S2/S6 40%: 10 kW / 13 kW Spindle speed: 42,000 rpm HSK40 Z-axis compensation Exo-call fault indicator Exo-net remote diagnostics Network connection Portable control panel HSCI FS Pressure amplifier for chuck Transport, training, and commissioning on request Ihodpfxow U D Igo Ah Net

Condition: used, Year of construction: 1995, pressure 100 t stroke 20 - 120 mm no. of strokes 40 - 240 /min distance between columns 1300 mm dayligth (stroke and adjustment up) 670 mm column travel -side 400 mm table surface area 1200 x 800 mm hole in the table 900 x 200 mm table height over floor 1150 mm ram surface 1130 x 650 mm ram adjustment 80 mm material width 250 mm material thickness 0,3 - 3,0 mm material cross-cut 750 mm² feed length 1 - 9999,9 mm power requirement 22,0 kW Weight 16,0 t Iedpfx Ahjwc U Nlj Nsht dimensions (WxDxH) 3,7 x 2,5 x 3,7 m height over floor 3,7 m permitted for automatic mode according to the CE-Norm with infinitely variable PIV-drive, pneumatic clutch/brake combination (make Ortlinghaus), electronic press force monitoring (two channel), automatic stroke adjustment, motoric ram adjustment, pneumatic counterbalance in ram, motorised circular oil lubrication electronic roll feed (make Kaiser, type KWV 250)

Condition: used, Year of construction: 1990, pressure 32 t distance between columns 680 / 550 mm stroke 8 - 50 mm no. of strokes 85 - 500 Hub/min dayligth (stroke and adjustment up) 300 mm column travel -side 250 mm Isdpevuuf Sefx Ah Njht table surface area 620 x 450 mm hole in the table 450 x 110 mm table height over floor 915 mm ram surface 560 x 350 mm power requirement 7,5 kW weight of the machine ca. 5,60 t required space 3,6 x 1,65 x 2,8 m ram adjustment 50 mm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch, pneumatic counterbalance in ram, pincer feed (ZR 18 D) can be offered without or with putting into operation in given condition

Condition: used, Year of construction: 1994, pressure 250 t distance between columns 1650 / 1400 mm stroke fix 150 mm no. of strokes 30 - 75 Hub/min dayligth (stroke and adjustment up) 665 mm Ihedpfx Ajvuucwoh Not column travel -side 550 mm table surface area 1600 x 900 mm hole in the table 1000 x 300 mm table height over floor 980 mm ram surface 1400 x 900 mm power requirement 42,0 kW weight of the machine ca. 33,00 t required space 2,8 x 2,5 x 4,4 m permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, FIX stroke, motoric ram adjustment, motoric centralized lubrication Werkzeugwechselsystem elektronischem Walzenvorschub (Normatic, AESL 500-2,8) electronic roll feed (Normatic, AESL 500-2,8) with motor (Indramat), motorised adjustable material guide, motorised height adjustment tool changing system distance table - ram without tool changing system approx. 765 mm can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 1982, pressure 30 t stroke 8 - 40 mm no. of strokes 100 - 600 /min distance between columns 330 mm dayligth (stroke and adjustment up) 280 mm column travel -side 300 mm table surface area 540 x 470 mm hole in the table 315 x 110 mm table height over floor 1000 mm ram surface 250 mm material width 120 mm material thickness - 3,0 mm feed length - 60 mm power requirement 5,5 kW Weight 2,6 t dimensions of the machine ca. 1,5 x 1,2 x 2,2 mxmxm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch, manual stroke adjustment, manuel ram adjustment, fix table, mechanical roll feed (Bruderer BBV 120/60) Ihedpfx Asvuk Hreh Njt table surface 540 x 300 mm or 330 x 390 mm as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1983, pressure 160 t stroke fix 160 mm no. of strokes 30 - 120 /min distance between columns 1190 mm dayligth (stroke and adjustment up) 735 mm column travel -side 600 mm table surface area 1200 x 1000 mm hole in the table 500 x 300 mm Ihedpfx Asvuk E Ujh Not table height over floor 900 mm ram surface 1000 x 800 mm ram adjustment 125 mm material width 550 mm material thickness 0 - 6,0 mm material cross-cut 1100 mm² feed length 350 mm power requirement 45,0 kW Weight 25,0 t dimensions of the machine ca. 2,3 x 2,1 x 4,7 mxmxm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive (PIV), hydraulic overload protection in ram, motoric ram adjustment, pneumatic counterbalance in ram, ram interlocking, centralized lubrication, mechanical pincer feed (Haulick, RS 350/550 SL 90) as is where is, WITHOUT putting into operation