Used Sub Spindle for sale (13,081)

Condition: good (used), Year of construction: 2012, 300mm max cutting diameter, 510mm mm max turned length, 51mm bar capacity, 11kW motor, Hedpfx Aezg Eb Dsggeu Spindle speed 6,000 rpm, milling speed 6,000 rpm, sub-spindle speed 6,000rpm, C axis 0.001 degrees, Fanuc oi-Series Control, 3 Jaw Chuck, Tool setter, 12 Station turret, parts catcher, parts conveyor

Condition: used, DMG Gildemeister GMX 400 linear multi-tasking twin spindle CNC lathe with Siemens 840D control & pneumotec gantry parts loading system with coolant paper filtration system, chip conveyor, IFM mist extraction unit, oil chiller, automatic doors, foot switches, wash gun, handwheel, signal tower & manuals. Overall dimensions: L9,347mm x W4,646mm x H3,018mm. Weight 24,000kg. With dual rohm KUBF-400/4 Ø400mm power chucks. Swing Ø640mm. Maximum turning Ø640mm. Maximum turning length 1,500mm. Axis travel 'X1'=550mm, 'Y'=220mm, 'Z1'=1,585mm, 'X2'=225mm, 'Z2'=1,400mm, 'Z3'=1,500mm, 'B'= ±120°. Rapid travere 'X'=40m/min, 'Y'=24m/min, 'Z'=60m/min. Hsdpoz Hzuwsfx Aggou Spindle bore Ø107mm. Maximum bar capacity Ø92mm. Maximum main spindle speed 4,000rpm (45kW Motor). Maximum sub spindle speed 4,000rpm (45kW Motor). Maximum rotary spindle speed 12,000 (22kW Motor). Rotary spindle taper capto C6. 60 position ATC. 12 position sauter turret. 20 position loading station with air blast cleaning tank.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, spindle motor power: 26 W, number of spindles: 2, spindle speed (max.): 5,000 rpm, spindle bore: 77 mm, Equipment: documentation/manual, MAZAK QTN-250 II MSY turning center + Fanuc robot with Meccano automation for flanges Year 2015 Control unit: MATRIX II Maximum swing (capacity): 640 Workable diameter / standard workable diameter (capacity): 380 Maximum workable length*1 (capacity): 500 Bar capacity (capacity): 77 Chuck size (main spindle): 250/210 Spindle speed (main spindle): 4500/5000 Spindle nose (main spindle): ASA 8 / ASA 5 Spindle speed (powered tool spindle): 5000 Rapid traverse rate axis X (feed): 36,000 Rapid traverse rate axis Z (feed): 36,000 Rapid traverse rate axis C (feed): 550 Travel (tailstock): 500 Main spindle motor (continuous / 40% duty) (motors): 26 kW Coolant tank (coolant): 300 l Hjdpfx Ajzz Rh Eoggju Sub-spindle chuck diameter: 210 Sub-spindle speed: 5000 Travel axes X, Z, Y: 230mm, 575mm, 100mm

Condition: used, Year of construction: 2022, HAAS ST25Y with counter-spindle, year 2022 maximum machining diameter: 298 mm, cutting length: 572 mm, spindle through-hole: 76 mm, 12-position BMT65 turret, Y-axis travel: +/- 50.8 mm, HAAS control system, 3-jaw chuck, 254 mm, -counter-spindle -chip conveyor, -swarf tray with pump, Hodpfezk H Hvsx Aggju -measuring probe, -parts catcher low operating hours, excellent condition.

Condition: used, Grant Aqua 5 Water BathThe Grant Sub Aqua 5 Plus is a digital, unstirred water bath designed for precise temperature control in laboratory applications. It is part of the SUB Aqua Pro series, known for its high-quality construction and reliability.​ Key Specifications Temperature Range: +5°C to 99°C Temperature Stability: ±0.2°C Capacity: 5 liters Internal Dimensions: 281 x 131 x 132 mm External Dimensions: 335 x 215 x 200 mm Heating Power: 0.35 kW Material: High-grade stainless steel tank Display: Digital with PID control for quick heat-up and precision Additional Features: Three programmable temperature presets Countdown timer with audible buzzer Front panel lock-out Hsdpfx Agoxv Ayvogou User-settable sample protection and fixed thermal cut-out Gable polycarbonate lid included​ This model is suitable for applications requiring stable and precise temperature control, such as sample incubation, enzyme reactions, and media preparation.

Year of construction: 2003, condition: ready for operation (used), A CNC twin-spindle lathe Gildemeister with a Y-axis is available. Bar capacity: 32mm, tool stations: 2x12, speed main and sub-spindle: 8000rpm, control: Siemens Sinumerik 840D Powerline, operating hours: 39426h, spindle hours: 25529h. Including coolant system, tools and short bar loader 1500mm Iemca Vip 80E. Documentation available. On-site inspection is possible. Expected to be available starting end of April 2026. Hsdeygw Svopfx Aggju

Condition: ready for operation (used), Design: vertical press with four columns. The vertical press platen is driven by an electric motor, Hodpetty Nksfx Aggeu the lower platen can be pulled out with the tool. -Dimensions: 2100x1600x3000mm -plate size: 950x1120mm -Electrical data: 380V; 43A; 22kW

Condition: good (used), Year of construction: 1989, machine/vehicle number: 18052, functionality: fully functional, pressing force: 3 t, stroke length: 500 mm, distance table to ram: 500 mm, total length: 700 mm, total width: 300 mm, total height: 780 mm, overall weight: 185 kg, Dornpresse Ageo DP3000R in good, fully functional condition. Technical specifications can be found in the last image. Hsdpfx Asz Hlpljggou

Condition: excellent (used), Industrial MXS5115A vertical spindle moulder / woodworking router table, suitable for professional woodworking shops. Ideal for profiling, grooving, edge shaping and custom milling operations on solid wood and wood-based panels. Specifications • Model: MXS5115A • Table size: 650 × 580 mm • Maximum working thickness: 120 mm • Spindle speed: 18,000 rpm • Collet sizes: 6.3 mm / 12.7 mm • Motor power: 2.2 kW • Power supply: 380 V, 3-phase Features • Heavy-duty cast iron work table • High-speed spindle for precise routing and profiling • Industrial construction • Suitable for furniture production, cabinet making and joinery • Easy adjustment and operation Condition • Good working condition. • Ready for use. • Inspection and testing are welcome. Hjdpjzmukuofx Aggou

Condition: excellent (used), Year of construction: 2015, Weinig Powermat 2400 moulder with 7 Spindles. (Year 2015) Working height: 10 - 160 mm . Working width: 20 - 230 mm. 50mm spindles 6,000 RPM (Not Powerlock) Bottom 15 kW + outboard bearing Right 11 kW + Straight jointer Left 11 kW + Straight jointer Top 15 kW + Straight jointer + outboard bearing Bottom 18.5 kW + Profile jointer Hedjz Eznzopfx Aggju Top 18.5 kW + Straight + Profile jointer Bottom 18.5 kW Straight jointer + outboard bearing 11kW feed motor, 60m/min. Heavy duty feed works. 10x top feed rollers. First top feed roller with clutch installed for use with mechanisation. 5x bottom feed rollers. Automatic lubrication system. Electric digital display memory system. CNC POSITIONING ON SPINDLES 3, 5 & 8 Possible to supply with Weinig moulder infeed and outfeed

Condition: used, Vitap Classic Multi-Spindle Drilling Machine, 21 spindles, left/right-hand spindles, quick-release mounting, Hodpoz Hxi Eefx Aggju spindle spacing 32 mm, drilling in vertical or horizontal position, 2 pneumatic clamps, power supply 380V, 1.8 kW motor, Machine ready for operation.

Condition: good (used), Code: 0488 Brand: GRIGGIO Model: T 45 T-PL - CE Standard Electronically programmed automatic tilting spindle moulder (+ 45° - 30°) with 3 contolled axis with tenoning carriage - CE Standard Technical data: Spindle tilting + 45° - 30° Shaft diameter mm 40 Motor power Hp 10 (Kw 7,5) Rotation speed 3000/4500/6000/8000/10000 rpm Shaft rotation reverser Electronic programmer SIEMENS controlling the sequential movement of the spindle Electronic programming: Spindle working height - Spindle tilting - Spindle moulder fence Electronic spindle moulder fence with spindle support to facilitate table exclusion Table with movable sector with manual adjustment in place of the rings on the table Height of work table mm 920 Hsdpfx Agez Hk T Aegsu Extensible front support bar Work table dimensions mm 1800 x 730 Max tool size retractable under work table mm 320 x 140 Tenoning carriage for tenoning operations mm 900 x 330 - Stroke mm 1300 The work table can be fully tilted to + 60 - 60 degrees with the possibility of using the entire work table surface in any position - It can be aligned with the machine work surface Tenoning guard with suction hood Aluminium tables on the guideway N° 2 suction hoods diameter mm 120 Automatic feeder with 4 rollers with speed variator with motorised lift Overall dimensions of assembled machine mm 2800 x 1600 x 1800 h Overall dimensions for transport mm 2250 x 1600 x 1800 h Weight kg 1300

Condition: like new (used), Year of construction: 2020, operating hours: 5,600 h, functionality: fully functional, machine/vehicle number: 0-250-77-3262, 1. BASIC MACHINE - rigid steel frame construction - 2 workpiece clamping devices with integrated stop system - Separate adjustment of the clamping devices via rack and pinion gear in X-direction - Digital AC servomotors - The position of the clamping devices at the workpiece is program-controlled - Adjustment of the clamping devices between the separate processing steps in the processing area is possible. - Automatic measuring of the workpiece thickness and lengths by the clamps and the stop system - Blowing nozzle for safe removal of residual parts off the clamps 1.1 LOWER PROCESSING SUPPORT - Rigid aluminium cast construction - Integrated threefold divided table with selectable air cushion - Lateral stop system - Adjustment of the axes in Y- and Z-direction - Ball bearing spindle (Z-direction) and rack and pinion gear (Y-direction) - Digital AC servomotors - Suitable for fitting of various configurations 1.2 UPPER PROCESSING SUPPORT - Rigid aluminium cast construction - Integrated threefold divided pressure beam with selectable air cushion - Adjustment of the axes in Y- and Z-direction - Ball bearing spindle (Z-direction) and rack and pinion gear (Y-direction) - Digital AC servomotors - Suitable for fitting of various configurations 1.3 WORKPIECE DIMENSIONS workpiece length: min. 200 mm workpiece length: max. 2500 mm workpiece width: min. 70 mm workpiece width: max. 1000 mm - with restrictions in processing: 1300 mm workpiece thickness: min. 8 mm (2 x 4 mm) workpiece thickness: max. 80 mm (2 x 40mm) workpiece stacking: max. 2 pieces - same workpiece dimensions Note: - Workpieces must have a straight edge at the reference edge - Max. curve tolerance: +/- 0.5 mm for a work- piece length = 2000 mm - The workpiece length/width ratio should be >=1. The longer edge of the workpiece should be placed on the machine. - Warped workpieces (>= 0.3 mm) lead to a higher rate of processing tolerances and wear at the workpiece tables - Due to the chips no stackable workpieces can be guaranteed for router processings. - An external cleaning or extraction in the outfeed area is recommended. - For through holes of double parts the drilling quality depends on the workpiece material and the tool as well as on the feeding speed profile and the rotation speed of the drilling spindle. Thus, however, efficiency could possibly be reduced. 1.4 WORKPIECE FEEDING AREA - Air cushion table in rigid frame construction - Surface from Hornit board - integrated fan 1.5 WORKPIECE REMOVAL AREA - Cross belt conveyor in rigid frame construction - 8 transport belts, frequency-controlled drive - 8 electro-pneumatic controlled disengaging device 2. CE SAFETY AND PROTECTION DEVICES - Safety fences in the lateral and rear area - Safety mats in the feeding area 3. ENVIRONMENTAL CONDITIONS - prescribed environmental temperature: + 5 degrees up to + 40° C (in case of environmental temperature >35°C or air humidity >65% a cooling unit for switch cabinet is recommended) 4. ENERGY SAVING MODE - ecoPlus button for starting stand-by Hsdpjz Df Txofx Aggeu operation. The button can be activated during processing. This will have the following impacts after the end of the program: - Primary power of drives will be switched

Condition: excellent (used), Year of construction: 2001, operating hours: 9,089 h, functionality: fully functional, machine/vehicle number: 94250, WEINIG HYDROMAT H23 ELECTRONIC FEED FREQUENCY CONTROLLED (8 – 60 M/MIN). FEED MOTOR 15 KW 50MM SPINDLES WORKING WIDTH MAX. 230 MM WORKING HEIGHT MAX. 160 MM SHORT INFEED WITH (GROOVED FEED GUIDANCE, SEE USES AND BENEFITS HIGHLIGHTED BELOW) BOTTOM 7.5KW 6,000 RPM RIGHT 7.5KW 6,000 RPM LEFT 7.5KW 6,000 RPM JOINTER READY RIGHT 7.5KW 6,000 RPM LEFT 7.5KW 6,000 RPM JOINTER READY TOP 11KW 6,000 RPM OUTBOARD BEARING, JOINTER READY BOTTOM 7.5KW 6,000 RPM OUTBOARD BEARING, JOINTER READY TOP 7.5KW 6,000 RPM OUTBOARD BEARING, JOINTER READY BOTTOM 11 KW 6,000 RPM OUTBOARD BEARING, JOINTER READY 12X TOP FEED ROLLERS 6X BOTTOM FEED ROLLERS CNC ADJUSMENT OF 1ST BEDPLATE FROM CONTROL PANEL POSSIBLE TO ADD ADDITIONAL STRAIGHT / PROFILE JOINTERS AS NEEDED FULL SOUND ENCLOSURE AUTOMATIC LUBRICATION SYSTEM FULL DOCUMENTATION INCLUDED EXHAUST MANIFOLD INCLUDED MACHINE LENGTH 5.2M POSSIBLE TO OFFER MECHANISATION IF NEEDED POSSIBLE TO OFFER MECHANISATION SPECIFICALLY FOR SHORT LENGTH FEEDING AND STACKING IF NEEDED Grooved Feed Guidance, Core Functions & Benefits: The longitudinal grooves milled directly into the bedplates work in conjunction with custom bottom cutterhead knives or grooving cutters. The initial cutter cuts matching grooves into the underside of the raw stock, registering it securely to the bed's grooves to keep short or cupped boards running straight without drifting off the fence. Friction & Resin Relief: Standard flat bedplates create significant surface drag when feeding wet, sap-rich, or resinous timber (like pine, fir, or green hardwood). The channels reduce overall contact area, lowering friction and preventing suction/sticking. Debris & Pitch Clearance: Sawdust, wood resin, and pitch buildup can cause uneven heights or feeding jams. Grooves act as evacuation paths, allowing fine dust and pitch to fall away from the main bearing surface. Wax/Lubricant Distribution: When paired with an automatic or manual bed lubrication system (such as table lubrication pumps), the grooves help distribute wax/oil evenly across the table rather than letting it wipe away on the first board. Common Applications Short Stock Processing: Ideal for running short pieces (such as parquet components, drawer sides, or short moulding blanks) that would otherwise struggle to maintain parallel alignment against the side fence. Cupped or Unseasoned Wood: Prevents cupped or warped boards from rolling or twisting as they hit the vertical and horizontal cutter spindles. High-Speed Feed Lines: Reduces the strain on feed rollers and drive systems by lowering bed drag during continuous industrial runs. Hjdpjz Eznuofx Aggou

Condition: good (used), Year of construction: 2014, functionality: fully functional, using Stäubli robots Specifications, information, price, images, etc. can be found in the PDF documents attached. Hjdpfx Agozuc T Tegou

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 471292, functionality: fully functional, operating hours: 438 h, power: 7.5 kW (10.20 HP), spindle diameter: 40 mm, rotational speed (max.): 9,000 rpm, total length: 3,000 mm, total width: 1,500 mm, total height: 1,820 mm, overall weight: 1,150 kg, Equipment: documentation/manual, Offering a used Martin T26 Duo Control swivel spindle milling machine for sale. Sale due to company restructuring. GS tested, BG test certificate, CE compliant. Technical data: Spindle swivel: -45 to +45° Height adjustment: electric with rapid and slow feed Depth adjustment: electric Table opening: electrically adjustable from 70 - 220mm Swivel adjustment: electric Feed rate (height): electric Stop adjustment: manual Height display: digital Swivel angle display: digital Milling stop display: digital Spindle diameter: 40mm with steep taper SK 40, collet quick-change system incl. torque wrench Electropneumatic locking via selector switch. Spindle speeds: 3000, 4500, 6000, 9000 rpm Power consumption: 7.5 / 9.5 kW Motor brake: wear-free, electrically braked Dust extraction connection: 2 x 120mm Machine length: 3000mm Machine width: 1400mm Weight: 1150kg Year of manufacture: 2007 Includes: Variomatic 4N feed system, continuously adjustable from 2-20 m/min, Protective device type Centrex Swivel device for milling stop Martin table extension on both sides with extendable workpiece support, approx. 3000mm long. Martin support for feed system, swivelable, with motorized height adjustment. Aigner Integral stop 650/500mm incl. filler bar. The machine is still connected and can be tested. Hedpfx Aozwp Uisggju Price plus VAT.

Condition: used, Year of construction: 1963, Rigid milling machine Year of manufacture: 1963 Spindle diameter 30 mm Availability: at short notice Storage location: Röllbach Hedpfxozk N Iij Aggeu

Condition: good (used), Year of construction: 1963, Stroke = 250 mm On request, transport and loading can be organized across Europe at an additional cost. Prices excl. VAT Inspection possible by appointment. Contact us – our team will be happy to assist you. Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, ETC. Do you need a high-quality yet affordable machine for your production? Or do you want to sell your equipment? Hodpozvnd Tjfx Aggeu For further information or contact options, please use the contact form.

Condition: used, Vitap Multi-Spindle Drilling Machine, 27 spindles, left/right spindles, quick-release mounting, spindle spacing 32 mm, drilling in vertical or horizontal position, Hodoz Hc Niepfx Aggeu 4 pneumatic clamps, power supply 380V, 1.85 kW motor, Machine ready for operation.

Condition: good (used), Year of construction: 1996, functionality: fully functional, For sale is a used SAMCO T 40 I table milling machine / swivel spindle milling machine, manufactured in 1996. This compact and robust milling machine features a spindle that can be swiveled up to 45°, multiple speed settings, and clockwise/counter-clockwise rotation. The spindle adjustment is conveniently done using the side handwheel. Technical specifications: Manufacturer: SAMCO / SCM Type: T 40 I Year of manufacture: 1996 Machine number: KK/032907 Voltage: 380 V / 50 Hz Motor power: 3 kW / 4 HP Speeds: 3,500 / 6,000 / 8,000 rpm Spindle length: approx. 125 mm Max. tool diameter: approx. 180 mm Swiveling milling spindle: up to 45° Clockwise/counter-clockwise rotation Motor brake Manual spindle height adjustment Hsdpfx Aozxx Egoggeu Milling fence with dust extraction option Weight: approx. 175 kg Used, well-maintained condition considering its age. The machine is compactly built and is well-suited for carpentry shops, joineries, and smaller woodworking businesses. Transportation is possible for an additional charge! The machine is currently still at the customer's location but would be immediately available! The machine will be inspected before sale. In the case of a sale to commercial customers, the warranty will be excluded due to the year of manufacture. Technical data and features may vary. Errors, prior sales, and changes are subject to change. All information without guarantee.

Condition: excellent (used), Year of construction: 2016, operating hours: 33,250 h, functionality: fully functional, travel distance X-axis: 1,150 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 600 mm, controller manufacturer: Heidenhain, controller model: TNC-620, overall weight: 8,500 kg, spindle speed (max.): 18,000 rpm, coolant supply: 20 bar, number of spindles: 1, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, 3/5-axis machining center Manufacturer: Spinner Type: VC-1150 Year of manufacture: 2016 Control system: Heidenhain TNC-620 Operating hours: approx. 33,250 h S/N: VTXXXX Technical parameters: ----- • Travel ranges X-Y-Z: 1,150 x 620 x 600 mm • Work table: 1,400 x 620 mm • Max. workpiece weight: 1,500 kg • Spindle: 18,000 rpm • Magazine: 60 x HSK-A63 • Coolant system 20 bar including internal coolant supply, bed flushing, • Paper band filter with 300L additional tank volume • LED work area lighting • Oil mist extraction • 3D touch probe • 2-axis NC rotary table with four spindles • Chip conveyor • Machine weight: approx. 8.5t Hedpfjz D Ak Uox Aggou • Dimensions: 2,650 x 2,800 x 2,700 mm Accessories: ----- • Documentation

Condition: good (used), Year of construction: 1985, functionality: fully functional, Spindle milling machine with a comprehensive set of tools included free of charge. Hedpfx Aoy Suhtjggsu

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 102940, WEINIG HYDROMAT H23 ELECTRONIC FEED FREQUENCY CONTROLLED (8 – 100 M/MIN). FEED MOTOR 22 KW 50MM SPINDLES WORKING WIDTH MAX. 230 MM WORKING HEIGHT MAX. 160 MM Hodpsz Ezn Uofx Aggju SHORT INFEED WITH 220MM TOP FEED ROLLERS BOTTOM 15KW 6,000 RPM, OUTBOARD BEARING, JOINTER READY RIGHT 11KW 6,000 RPM JOINTER READY LEFT 15KW 8,000 RPM JOINTER READY RIGHT 11KW 8,000 RPM JOINTER READY LEFT 15KW 8,000 RPM, JOINTER READY TOP 18.5KW 6,000 RPM OUTBOARD BEARING, JOINTER READY BOTTOM 11 KW 6,000 RPM OUTBOARD BEARING, JOINTER READY (STRAIGHT JOINTER) + OUTBOARD BEARING TOP 18.5KW 8,000 RPM OUTBOARD BEARING, JOINTER READY (STRAIGHT JOINTER) + OUTBOARD BEARING BOTTOM 22 KW 6,000 RPM OUTBOARD BEARING, JOINTER READY 12X TOP FEED ROLLERS (2X 220MM + 10X 140MM) 7X BOTTOM FEED ROLLERS POSSIBLE TO ADD ADDITIONAL STRAIGHT / PROFILE JOINTERS AS NEEDED AUTOMATIC LUBRICATION SYSTEM FULL DOCUMENTATION INCLUDED MACHINE LENGTH 5.2M

Condition: used, Year of construction: 2011, Spindle swiveling: Yes, -45 to +45° Height adjustment: Handwheel Swivel adjustment: Handwheel Hsdpfjzdzbuex Aggju Milling vice adjustment: Manual Height indicator: Mechanical counter Swivel angle indicator: Mechanical counter Milling stop indicator: Mechanical counter Milling spindle diameter: 30mm / new milling spindle Spindle speeds: 1500, 3000, 4500, 6000, 9000 Motor power: 4 kW Motor brake: Yes, automatic Dust extraction connection: 2 x 120mm Machine length: 1000mm Machine depth: 1200mm Weight: 580kg

Condition: used, Year of construction: 2000, Spindle swivels: Yes, -45 to +45° Height adjustment: electric Swivel adjustment: electric Hjdpfxszdzbzs Aggsu Stop adjustment: manual Height display: digital Swivel angle display: digital Milling stop display: digital Spindle diameter: 30 mm, 40 mm Speeds: 3000, 4500, 6000, 9000 Power consumption: 5 / 6 kW Motor brake: Yes, automatic Dust extraction port: 2 x 120 mm Machine length: 2500 mm Machine width: 1400 mm Weight: 1100 kg