Used High Speed Spindle for sale (49,627)

Condition: good (used), KLOPP H 1000 – Planing machine - Planing length approx. 1000 mm - Planing width approx. 750 mm - Automatic feed - Work table extension Dsdpfx Alszfv Nve Ajwc Dimensions: L x W x H 3.4 x 1.5 x 1.7 meters / Weight 3800 kg Subject to errors and omissions.

Condition: refurbished (used), Year of construction: 2027, pressing force: 50 t, Machine available to order (made-to-order): Dodpfx Aozlqk Uel Aowc Fully reconditioned B500-950 high-speed automatic stamping press Table length 950 mm (optionally 1150 mm or 1250 mm available), Adjustable stroke 16 to 51 mm, A servo feed can be installed as an alternative to the Bruderer BBV 202/120 roll feed. Contact us for detailed quotations.

Condition: ready for operation (used), functionality: fully functional, COLETT - Gamesa – Radial drilling machine “PORTABLE, operated by crane” Dwodpfx Aszpfy Sjl Aoc -Outreach approx. 1200 mm -Universal swivel head -Spindle speeds 95 – 750 rpm -Automatic feed -Morse taper shank MK 4 -Outreach height-adjustable, approx. 1400 mm -Control cabinet / Retrofit Dimensions: L x W x H 2 x 1 x 2.1 meters / Weight 1600 kg Errors and omissions excepted.

Condition: good (used), Year of construction: 2014, Offer 26252 Technical data: - Drilling capacity in full steel ST 60: 22 mm - Drilling capacity GG 25: 32 mm - Thread cutting ST 60: M 20 - Thread cutting GG 25: M 24 - Drill spindle mounting: MK 4 - Quill stroke: 140 mm - 18 drill spindle speeds: 60 - 3050 rpm - Drilling feed, stepless: 0.075 - 0.15 - 0.70 mm/rev - Drilling radius min / max: 420 / 1320 mm Dwjdpfxjzwftze Al Asc - Swivel angle: 320° - Table size: 1200 x 600 mm - Table height: 905 mm - Motorized height adjustment / stroke of the drill column: 430 mm - Hydraulic column and arm clamping - T-slots, vertical, on the left side of the machine - Coolant system - Drive: 400 V / 1.1 / 1.6 kW - Space requirement: approx. W 1300 x H 1910 / 2340 x D 2700 mm - Weight: approx. 1800 kg

Condition: used, Year of construction: 1994, operating hours: 28,000 h, functionality: fully functional, The Bruderer BSTA 80H is an 80-ton high-speed stamping press built for heavy-duty progressive-die production, fitted with a BBV 320/200 strip feeder and Unidor tool monitoring. In stock in Pforzheim, ready for inspection. Nominal force: 800 kN (80 tons) Tool monitoring: Unidor Stroke rate: 100–1,000 spm Strip feeder: Bruderer BBV 320/200 Adjustable stroke: 16–63 mm Clamping plate area: 970 mm Dodjzibtbspfx Al Aewc Main drive: 43 kW Power supply: 380 V / 50 Hz Ram area: 760 x 510 mm Table area: 950 x 910 mm Strip inlet height (adjustable): 80–180 mm Max. strip width: 360 mm Max. material thickness: 3 mm Machine dimensions: 2834 x 1742 x 3460 mm Weight: approx. 15,550 kg Operating hours (main drive): approx. 28,067 h More machines from brands Bruderer, Bihler, Soprem, Noxon, Huras, Schaal and Mabu on stock available on request

Condition: used, Year of construction: 2005, total height: 2,500 mm, total length: 7,500 mm, total width: 3,700 mm, Colour: Grey Empty weight: 9.600 kg Price: On request - Year: 2005 - Documentation available: Yes Dwjdpozkudcjfx Al Ajc - CE marking present: Yes - CE certificate present: No - Drive system: CNC - Horizontal/vertical: vertical - Control system brand: Siemens - Power [kW]: 24.0 - Number of axes [pcs]: 4 - X-axis travel [mm]: 2000 - Y-axis travel [mm]: 500 - Z-axis travel [mm]: 550 - C-axis rotation [°]: 360 - Table length [mm]: 2600 - Table width [mm]: 550 - Tool holder: ISO40 - Main spindle power [kW]: 22 - Min. spindle speed [rpm]: 20 - Max. spindle speed [rpm]: 12000 - Positioning accuracy [mm]: 0.01 - Travel speed [mm/s]: 667 - Options: Tool magazine, Chip conveyor, External cooling - Transport dimensions: 7500mm x 3700mm x 2500mm (l x w x h) - Transport weight [kg]: 9600kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Industrial MXS5115A vertical spindle moulder / woodworking router table, suitable for professional woodworking shops. Ideal for profiling, grooving, edge shaping and custom milling operations on solid wood and wood-based panels. Specifications • Model: MXS5115A • Table size: 650 × 580 mm • Maximum working thickness: 120 mm • Spindle speed: 18,000 rpm • Collet sizes: 6.3 mm / 12.7 mm • Motor power: 2.2 kW • Power supply: 380 V, 3-phase Features • Heavy-duty cast iron work table • High-speed spindle for precise routing and profiling • Industrial construction • Suitable for furniture production, cabinet making and joinery • Easy adjustment and operation Condition • Good working condition. • Ready for use. • Inspection and testing are welcome. Djdpozmukuofx Al Ajwc

Condition: good (used), Year of construction: 1985, spindle turning speed - stepless 26 - 1650 U/min voltage 380 V 0 50 Hz rated current 15 A connected load 6,5 kW tool taper MK 4 weight of the machine ca. 2,3 t dimensions of the machine ca. 1500 x 1200 x 2500 mm Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Rated current: 15 A Connection: 6.5 kW Automatic feed: 0.05 - 0.45 mm/rev Column lifting speed: 40 mm/s Column stroke: 450 mm Drilling spindle stroke: 200 mm Drilling zone: 430 - 1150 mm Height adjustment of the drilling spindle: 330 - 780 mm Tool holder: MK 4 Table dimensions: 1525 x 560 mm Table height: 800 mm Dwodpsvylh Uefx Al Aoc

Condition: used, Year of construction: 2011, operating hours: 20,155 h, functionality: fully functional, machine/vehicle number: E807024, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 30,000 rpm, spindle speed (min.): 3,000 rpm, table width: 600 mm, table length: 850 mm, total height: 2,750 mm, total width: 2,870 mm, total length: 3,390 mm, type of input current: three-phase, workpiece weight (max.): 800 kg, overall weight: 7,500 kg, distance table to spindle center: 560 mm, input current: 63 A, For sale: a professional, high-speed machining center of the HSC (High Speed Cutting) class. The machine's main advantage is its exceptionally efficient spindle, reaching up to 30,000 rpm, mounted on a precise HSK-50E taper. Combined with a rigid and heavy construction (weight approximately 7,500 kg), the machine guarantees perfect surface quality, rapid milling speeds, and the ability to operate stably with micro-tools. An ideal choice for the precise machining of molds, dies, aluminum parts, light metals, and plastics. Technical specifications: Spindle and drive (main HSC advantage): • Spindle speed: 3,000 to 30,000 rpm (High Speed Cutting) • Spindle taper: HSK-50E (ensures excellent balance and safety at high speeds) • Spindle motor power: 15 kW Dimensions and working area: • Table dimensions: 850 x 600 mm • Maximum, uniform table load: 800 kg • Dimensions of T-slots: 16 mm x 5 pcs. • Footprint (overall dimensions): 3390 x 2870 x 2750 mm Travel ranges (axes): • X-axis travel: 800 mm • Y-axis travel: 600 mm • Z-axis travel: 400 mm • Distance from spindle to table surface: 160 – 560 mm Dodpjzuzp Hsfx Al Ajwc Dynamics and accuracy: • Positioning accuracy: ±0.005 mm • Positioning repeatability: ±0.0015 mm • Maximum working feed rate: 20 m/min • Maximum rapid feed rate: 30 m/min Tool magazine and media: • Tool magazine capacity: 16 tools • Maximum tool diameter: Ø20 mm • Dielectric fluid tank capacity: approx. 200 liters Power supply and installation: • Power requirement: 45 kW • Preferred fuse rating: 63 Amp (time-delay “C”)

Condition: refurbished (used), Year of construction: 2027, pressing force: 25 t, Machine available to order (built-to-order): Fully refurbished B250-740 high-speed automatic stamping press Table length 740 mm (optionally 850 mm), Adjustable stroke 13 to 38 mm, A servo feed can be installed as an alternative to the Bruderer BBV 190/85 roll feed. Djdpfx Alezlqkze Aewc Contact us for detailed quotations.

Condition: used, Gate size: 4040x4300mm Dsdpfjvpd T Ijx Al Aewc Sliding profile length: 6530mm Manufacturer: Hörmann

Condition: used, Year of construction: 1985, Technical details: Punching capacity: 40 kN air pressure - required: 8 bar ram stroke - adjustable min/max: 6 - 50 mm ram adjustment: 50 mm no. of strokes: 70 - 400 Hub/min Table dimensions: LxB: 480 x 445 mm hole in table: LxB: 250 x 112 mm slowing-down time: 80 ms bei 450 U/min. clamping surface ram: LxB: 420 x 345 mm ram hole: Ø 40 x 230 mm voltage: 380 V control voltage: 220 V frequency: 50 Hz total power requirement: ca. 19 kVA (ca. 7,5 KW) weight of switch cabinet: 0,3 t machine weight ab.: 4000 kg Dsdpou Icwgsfx Al Aswc 40t punching press without roll feed/conveyor belt system Operation via control panel / two-hand operation Operation: manual / automatic *

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, Year of manufacture: 1995 Type: DR 40 Z Dwsdpezx H Icjfx Al Ajc Machine number: 1205-3 Drilling capacity in steel: 40 mm Drilling capacity in cast iron: 50 mm Thread cutting in steel: up to M33 Thread cutting in cast iron: up to M45 Tool holder: MK 4 Spindle diameter: 55 mm Spindle travel: approx. 200–220 mm Spindle speeds: 18 steps, approx. 35–1,800 rpm Feeds: 0.075–0.60 mm/rev Vertical adjustment: 450 mm Table: 1,200 × 600 mm Weight: Approx. 2,400 kg

Condition: used, Year of construction: 2003, Fully functional ready to use. Please check out our other listing as well Dwjdpfx Ajwt R Dmol Aoc

Condition: used, Year of construction: 1989, Make and model: Bruderer BSTA 25 EL Year of manufacture: 1989 Nominal capacity: 250 kN, 25 tons Max. number of strokes: 100/1350 Adjustable stroke: 13, 16, 19, 25, 32, 38 mm Table dimensions: 640 x 530 mm Passage between the supports: Longitudinal 640 mm; Lateral 220 mm Fitted with roll feeder BBV 190/85 on right hand side. Max width of strip: 160 mm Feed length: variable up to 85 mm max Optional: Sound insulating cabin Oil pump. Heat exchange oil cooler. Front and rear safety guards. Fitted on 4 spring feet. Dsdpfxsyrf Aas Al Aswc Slide/Ram adjustment: 51 mm Documentation included. Press weight cca. 5000 kg.

Condition: ready for operation (used), Year of construction: 1995, Drilling capacity St 60/GG 22: 40/50 mm Dwjdpfxey I Ua Ie Al Aec Thread cutting St 60/GG 22: M 36/M 45 Clamping area of the table: 600 x 1800 mm Height adjustment of the boom: 450 mm Min./max. drilling radius: 305/1305 mm Spindle taper: SK 40 Quill stroke: 200 mm Infinitely variable spindle speeds: 15 - 2800 rpm Infinitely variable feeds: 5 - 2000 mm/min Spindle drive, frequency controlled: 5.5 kW Electrical connection: 400 V, 14 kVA Weight: 3400 kg Space required: 3800 x 2000 x 2500 mm

Condition: like new (used), Collette high speed bowl mixer Model: SM200 Dodpfxod D N Rmo Al Aewc high speed bowl mixers, 200L, stainless bowl and mixer attachment, brand new unitronics HMI + PLC controls

Condition: good (used), Kliklok Concorde K170 cartoner in nice condition. Has come from major UK food factory so has been very well maintained. Several change parts may be available with this machine. Dwedpenmv N Ssfx Al Ajc

Condition: excellent (used), Superb condition, currently part of line in production with robotic top load machine picking cereal bars which are then loaded into this machine. Videos of line are available upon request. Can be seen running until near end of August 2023 Dwedonmv Raepfx Al Aec

Condition: used, Year of construction: 1998, functionality: fully functional, SECOND-HAND HIGH SPEED VERTICAL MILLING MACHINE CAMAM MOD. FV/1T-1P - Volt. 380/50 Dwedpfex Rdhtjx Al Aec - CE rules - Year 1998

Condition: used, Year of construction: 1987, functionality: fully functional, table length: 950 mm, table width: 910 mm, pressing force: 80 t, overall weight: 16,500 kg, punching force: 80 t, Max. pressing force: 80 tons / 800 kN Strokes per minute: 100 - 1000 SPM Mains voltage: 400 V Mains frequency: 50 Hz, 60 Hz Power consumption: 43 kW Control voltage AC: 24 V Compressed air connection: 6–10 bar Stroke length adjustment: 16, 19, 26, 35, 43, 51, 58, 63 mm Ram adjustment: 76 mm Average upper tool weight: 600 kg Maximum tool width: 970 mm Bolster area: L–R: 950 mm F–B: 910 mm Ram area: L–R: 760 mm F–B: 510 mm Max. tool width (L–R): 970 mm Strip inlet height: Max.: 160 mm Min.: 70 mm Strip feeder (left): Bruderer BBV 202/120 Max. strip width: 202 mm Feed pitch: 0–120 mm Bed opening: L–R: 920 mm F–B: 320 mm Machine dimensions: Length: 2834 mm Width: 1742 mm Height: 3460 mm Total weight with 1× BBV 202: approx. 17,500 kg Electrical cabinet dimensions: Length: 1200 mm Width: 500 mm Height: 1025 mm Weight: approx. 250 kg The soundproof cabin is not included in the offer, but it can be purchased separately. Dedpfjxzr Ruex Al Aewc We also have many additional Bruderer, Schaal, Mabu and Bihler press models in stock, as well as decoilers and strip straighteners.

Year of construction: 2021, condition: ready for operation (used), Suitable for the separation of free oils from cooling lubricants, max. output: 500l/h, max. liquid temperature: 70°C, pH value: 6-9, length: 620mm, width: 510mm, height: 1140mm, weight: 60kg, with documentation. Dwedpfx Ask E Nccel Aoc

Condition: good (used), BSTA 30 / 600 spm Dsdpfsda Ha Nsx Al Aowc Bruderer Feed BBV 120/60 Press force max. 300 KN Power consumption from 1.5 to max. 5.5 KW Technical Air 6-10 bar Operator’s instruction Bed opening 250 mm +/-20mm Stroke: 8-40 mm Strokes per minute.: Max. 600 spm variable from 100-600 spm With Automatic central lubrication Main shaft cooler Pneumatic clutch and pneumatic brake Three working mode Programmable speed and number of strokes, Reverse flywheel mode Feeding of strip from left to right or right to left Strip pushing or pulling Roll feed BRUDERER BBV Strip width ca. max. 190 mm Feeding pitch ca. max. 60 mm Strip max. thickness 3,5 mm Distance between columns 325 mm Table height from floor 1000 mm Table surface area 540 x 300 Hole in the table 315 x 110 mm Ram surface dia. 250 mm Weight ca. 3.000 kg Dimension ca. 1100 x 1.400 x 2.200 mm Feed pitch up to max. 60 mm adjustable, highly accurate(tol. 0.02 mm) Emergency stop and all other CE safety guards and relays Indexing per minute, infinitely variable Automatic in feed, fully synchronized with punching moment More high speed presses on stock made by Bruderer models BSTA 18, 20, 30, 200, 50 and Schaal and Mabu presses

Condition: good (used), Year of construction: 2001, The machine will be delivered including a new replacement spindle. Digma HSC 500, Dodpfxjy A H Tps Al Aewc year of manufacture 2001, Heidenhain iTNC 530 control, travel X/Y/Z 500/400/350 mm, spindle speed up to 42,000 rpm, tool holder HSK 40, laser diameter measurement, oil mist lubrication system, extraction for graphite machining, 3D infrared measuring probe, The tool cannot be released from the spindle; according to the service technician, this is not a spindle problem but a hydraulic issue. A new HSC replacement spindle is included.

Condition: good (used), Year of construction: 1988, machine/vehicle number: 77796, Offer 25071 Technical data: - Electro-hydraulic raising and lowering of the saw bow - Saw blade dimensions: 400 x 45 x 2.0 mm - Cutting range - 90° round: approx. 250 mm - flat: approx. 250 x 130 mm - square: approx. 220 x 220 mm - Max. vice opening width: 405 mm - Stroke and cutting speeds adjustable - Mitre-adjustable vice - Electric motor with coolant unit - Drive: 380 V / 2.0 kW - Required space: approx. W 550 x H 1270 x D 1700 mm - Weight: approx. 380 kg Dsdpjwzu A Ajfx Al Aewc