Ac spindle motor buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
4
UAASKB-08CHSB1 Yaskawa AC spindle motor, serial number according to the photo, hole distance of the fixing holes: 210 x 255 mm, Ø drive shaft: 48 mm, used, normal wear, 100% functional, included with com. photos attention: cost for packing and shipping please enquire separately! ATTENTION: Please enquire for charges for packing and transport separately! Hsm89r7 more
1
Rebating machine (boosted spindle motors) SMA-REF-5255 Type: window construction (wood) profiling 10/2 Year: 1994 Control: Weinig Spindles: Spindle stroke: 3 x 80 mm Spindle diameter: 50mm Motor power: each 11 kW Features: Tables laminated Electr. height adjustment f. feed (digit. display) Multiple stroke 4 tool sets f. 2 profile spindles Condition: ready for action stored Location: Central Germany Availability: on demand more
3
We offer you, a used spindle motor of a micron WF21C. The motor fits almost all MIKRON WF machines (Please check) Our offer is aimed at commercial persons covered in the sense of the Gewerbeordnung GewO according to § 14. M2ush The offer is subject to change reserved, sale. Please enter your full contact details to get a quote with our terms and conditions and terms of payment. Mistakes in the descriptions and offerings are subject to change! more
1

AC spindle motor Fanuc A06B - 0752 - B190

Hornberg-Niederwasser, GermanyGermany dealership location
6626 km
used
200 V 232 / 3.7 KW Ixfmwp9jq 1,500/8,000 1/min 11/15 A more
5
Mitsubishi SE-EV-FV AC spindle motor, serial number according to the photo, hole distance of the fixing holes: 152 x 152 mm, Ø shaft: 32 mm, normal wear, 100% needed, without cooling fan, functional caution: cost for shipping and handling separately request! ATTENTION: Please enquire for charges for packing and transport separately! Bcjdeoubia more
2

AC spindle motor Fanuc A06B-0754-B190

Hornberg-Niederwasser, GermanyGermany dealership location
6626 km
used
200 Volt 1,500/8,000 1/min 5.5/9 KW Pgyhxzej 22/31 A more
3
FANUC A06B-0845-B100 AC spindle motor, pitch of holes: 152 x 152 mm, Ø shaft: 48 mm, used, normal wear, cover of the terminal box is missing, 100% functional Bci9bkov0i more
5
FANUC AC motor spindle model 40 p 4 p 18.5/22kW Max 4500 RPM from IKEGAI TURN 25, L x W x H: 625 (+ wave 140) x 315 x 400 mm hole distance of the fixing holes: 255 x 280 mm, Ø shaft: 60 mm, it's probably type A06B-0758-B201 #3000 , used, normal wear, 100% functional caution: Please separately request costs for shipping and handling! ATTENTION: Please inquire for charges for packing and transport separately! Bci9dng7gp more
3
FANUC A06B-0729-B194 AC spindle motor, pitch of holes: 190 x 190 mm, Ø shaft: 55 mm, normal wear, 100% needed, functional warning: Please separately request cost of packaging and shipping! ATTENTION: Please inquire for charges for packing and transport separately! Ueb7cfwd more


ac spindle...
daily

New machines via email!

Stay updated!
3
FANUC A06B-0753-B190 AC spindle motor, serial number according to the photo, hole distance of the fixing holes: 130 x 130 mm, Ø drive shaft: 28 mm, normal wear, 100% needed, operational warning: Please separately request costs for shipping and handling! ATTENTION: Please enquire for charges for packing and transport separately! Bci9axmksg more
3
FANUC A06B-1002-B100 AC spindle motor model 2, hole distance of the fixing holes: 130 x 130 mm, Ø drive shaft: 28 mm, normal wear, 100% needed, operational warning: Please separately request costs for shipping and handling! ATTENTION: Please inquire for charges for packing and transport separately! Cvlgj3km more
5
FANUC A06B-1427-B123 #03K 3 AC spindle motor, serial number according to the photo, hole distance of the fixing holes: 152 x 152 mm, Ø drive shaft: 48 mmgebraucht, properly completely overhauled by the manufacturer and tested 100% functional, included with com. photos attention: cost Please separately request for shipping and handling! ATTENTION: Please enquire for charges for packing and transport separately! G92nof9so more
3
FANUC A06B-0751-B190 #3000 AC spindle motor, pitch of holes: 102 x 102 mm, Ø shaft: 28 mm, used, good condition, 100% functional G92ko0hke more
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Bbuqsk02sh (20) Cutter Stations, 64" max. workpiece length, (20) dual carving spindle heads, 8" between spindles, 20" max. working diameter. -- Each head has a roughing & finishing spindle, all heads swivel 360° with pneumatic locking. -- Upper carriage controlled by (2) High Frequency changers allowing (2) motor speeds of 12,000 & 18,000 RPM. -- Pneumatic chucking of material, stock turns 360°. - Copy stylus of hardened and ground steel, adjustable fo... more
6

Multi-Spindle Screw Machine Schutte SF26 S DNT

Oak Forest, United StatesUnited States dealership location
898 km
1999
used
Schutte SF26 S DNT Multi-spindle Screw Machine. Mfd. 1999. 6-spindles. Pickoff Attachment. 6 Slides. 4 meter Pietro Cucchi Bar Loader. V28km2su more
5
Mitsubishi HA100C permanent magnet AC servo motor with Tamagawa Seiki ATT-A-II encoder, serial number according to the photo, used, normal wear, 100% functional, included with com. photos Yrdmx90 more
6

Tilting spindle moulder SAC TS125

Herrnzell 6, 82281 Egenhofen / Herrnzell, DEGermany
6816 km
1979
good (used)
Type: TS125 Second-hand machine Swivel range-5 to + 45 ° Spindle diameter 30 mm Speeds: 4 electrical height adjustment Electric swivel adjustment Power consumption: 5, 5kW Year of construction: 1979 Location: Camp / 82281 Herrnzell Eftpmh98e more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bbuqsumbgi (16) Cutter Stations, 55" max. workpiece length, (16) dual carving spindle heads, 8" between spindles, 20" max. working diameter. -- Each head has a roughing & finishing spindle, all heads swivel 360° with pneumatic locking. -- Upper carriage controlled by (2) High Frequency changers allowing (2) motor speeds of 12,000 & 18,000 RPM. -- Pneumatic chucking of material, stock turns 360°. - Copy stylus of hardened and ground steel, adjustable fo... more
9

Horizontal Borers KEARNS RICHARDS SE125 Horizontal Boring/Facing Machine, 125mm Spindle

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
ready for operation (used)
Serial No. 6675 Table size 1800mm x 1500mm Table Longitudinal traverse (Y) 1500mm G9bcbgoca Cross traverse 2400mm Swivels 360 Degrees Head stock vertical traverse 1350mm Input 420/3/50 ac 30 hp Spindle & facing speeds 1.2-250 rpm Spindle speeds 1.2-1000 rpm Feed rate 1.5-3820mm Per Minute Facing head diameter 900mm Facing head slide cross traverse 320mm Spindle traverse 750mm Spindle diameter 125mm Bores 50 int Table load 12,000 kgs Digital read out Heidenhain 2 Axis Fitted with Outrigger Suppo... more
5
Mitsubishi HA100C permanent magnet AC servo motor with Tamagawa Seiki ATT-A-II encoder, serial number according to the photo, used, normal wear, 100% functional, included with com. photos 08xp0ht2 more
9
Spindle moulder PAOLONI T 160 CL with roller table very good condition, the engine comes from a small village shop with 2 people everything works fine all bearings and guides are OK, the machine has a high running smoothness the machine table's width 1900 mm and 780 mm deep, on the right side there is a widening, width 650 mm and 500 mm deep with roll Edition forward to the machine table there is a retractable surface, width 1900 mm, it can be pulled out to 400 mm with Shaper fence, whic... more
1
Elect./Voltage: I really don't know? Glm3lz78g LA SCOLPITRICE 12 Spindle Carving Machine. -- (12) Cutter Stations, (12) dual carving heads, -- Each head has a roughing & finishing spindle, all heads swivel 360ø with pneumatic locking. --NOTE: Missing (1) carving head. -- Machine is currently under power (not in use - business is closed). more
15
CATALOG NUMBER 5041 TECHNICAL DATA TECHNICAL DATA number of spindles 21szt distance between extreme spindles 640mm pitch of spindle spacing 32mm max drilling depth 60mm vertical drilling width 60mm drilling up / down and angling + right-left drills, mounted on allen + pneumatic clamps Bcwaipb28h 2 pcs dimension of the table surface 490x1040mm height to the table surface 920mm 2.2kW main engine working pressure 6-8bar dimensions length / width / height 2830/1150 / 1320mm ... more
2

Horizontal Borers KEARNS RICHARDS SH75 Horizontal Boring/Facing/Milling Machine. 75mm Spindle

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
ready for operation (used)
Serial No. 7076 Table size 1000mm x 1000mm Table Longitudinal traverse (Y) 1000mm Table Cross traverse (X) 1250mm Table Swivels 360 Degrees Head stock vertical traverse (Z) 1000mm Input 400/440/3/50 ac 7.5 kW Spindle & facing speeds 5.6-280 rpm Spindle speeds 180-1120 rpm Feed rate 0.76mm-3800mm per Minute Facing head diameter 500mm Facing head slide cross traverse 160mm Spindle traverse 500mm Spindle diameter 75mm Spindle Taper 40 int Equipment Spindle Support & Vertical Milling Head Bciey303s... more
4
Mitsubishi HA100C permanent magnet AC servo motor with Tamagawa Seiki ATT-A-II encoder, serial number according to the photo, used, normal wear, 100% functional, included with com. photos Ysixe0lj more
3
3 units on stock Bhw9krv lift 1,500mm adjusting force 4,000N lifting speed 5 mm/s *- new - * more
2

Motor SIEMENS 1FT6105-1AC71-1EG1

Göppingen, GermanyGermany dealership location
6699 km
used
power capacity unbek. kW volt unbek. V ampere A total power requirement kW weight of the machine ca. t dimensions of the machine ca. m U2iqtchdf more
15
CATALOG NUMBER 5040 TECHNICAL DATA TECHNICAL DATA number of spindles Bcwah29qwf 19szt distance between extreme spindles 580mm pitch of spindle spacing 32mm max drilling depth 60mm vertical drilling width 60mm drilling up / down and angling + right-left drills, fixed on allen + pneumatic clamps 3szt dimension of the table surface 370x810mm height to the table surface 860mm 1.5kW main engine working pressure 6-8bar dimensions length / width / height 1100/760/1300 weight 2... more
15

Rotary Table Surface Grinders BLANCHARD 20CK36 Rotary Table Vertical Spindle Surface Grinder.

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
ready for operation (used)
Serial No. 87-6-52 Rotary electro magnetic table 36" diameter Bcie23gu0o Table speed 5 27 rpm Height under wheel 15" Segmental wheel size 18" Wheel head down feed .25mm - 1.25mm Wheel head rise & fall 14" Input 400/3/50 Fitted with swarf conveyor, coolant and wheel dresser Length 12' Width 5'6" Height 8' 2" Nett weight actual. 6,330 Kgs / 6.23 Tons more
4
Mitsubishi SJ-9-A spindle motor, serial number according to the photo, used, normal wear, 100% functional, included with com. FotosACHTUNG: Please separately request costs for shipping and handling! ATTENTION: Please enquire for charges for packing and transport separately! Bcnnhro9hm more
6
number of spindles 6 spindle passage 32 mm turning length 152 mm Speed 200-2800 U/min. turning diameter 32 mm feed Werkstoff: 254 mm Ogcdcc8w7 Accessories: multi edge turning, univ. thread cutting attachment, Strehleinrichtung, chip conveyor, 1 set collets, set of change wheels more
5

"Multi-spindle drilling machine" DB

Klipphausen, GermanyGermany dealership location
6821 km
1983
used
"Multi-spindle drilling machine DB Number of separate aggregates: 4 Boring spindles vertical: 8 Working width X mm: 790 Bottom side processing: Yes Boring stroke mm: 25 Wwrnk Positioning: manually Boring feed: manually Workpiece clamping: manually Total connection kW: 2,2 Required space lxwxh: 1450x1250x1000 Weight kg: 275 Operating status: basic functions can be shown" more
15
Robust swing cutter by Martin T25 Pole-reversible drive motor 5 / 6 kW with automatic motor brake Ss0yr8 R/L barrel Swivel angle from - 5 to 45 degrees electrically adjustable height max 150 mm, electrically adjustable Speed 1500, 3000, 4500, 6000 and 9000 RPM Suitable speed 1500 for grinding Spindle diameter 30 mm Comfort stop T226 with digital display for overall adjustment and spout jaw individually, as well as entering the cutter diameter (this is automatically calculates the depth... more
14

Horizontal Borers KEARNS RICHARDS SH75 Horizontal Boring/Facing Machine, 75mm Spindle

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
1973
ready for operation (used)
Serial No. 6681 Table size 1000mm x 1000mm Table Longitudinal traverse (Y) 1000mm Table Cross traverse (X) 1250mm Table Swivels 360 Degrees Head stock vertical traverse (Z) 1000mm Input 400/440/3/50 ac 7.5 kW Spindle & facing speeds 5.6-280 rpm Spindle speeds 180-1120 rpm Feed rate Variable, 76mm-2500mm Facing head diameter 420mm Facing head slide cross traverse 160mm Spindle traverse 500mm Spindle diameter 75mm Spindle Taper No. 5 Morse Taper Digital read out Anilam 3 Axis Length 13'10" / 4.22m... more
4
Mitsubishi SJ-9-A spindle motor, serial number according to the photo, used, normal wear, 100% functional, included with com. FotosACHTUNG: Please separately request costs for shipping and handling! ATTENTION: Please enquire for charges for packing and transport separately! Bcnnh2ae2n more
2
After GO Number of spindles: 11 Nbwsb Spindle speed: 24 - 1415 rpm more
1

decoiler (motorized) HACK MBH6

Norderstedt, GermanyGermany dealership location
6479 km
1990
used
very good condition max. coil diameter 1000mm Muctbo capacity 1000kg coil inner diameter adjust 50 mm dimensions 100x180x40cm output 30 UPM more
6
Swivel milling machine T150 of SCM Gr3b2xlh Drive motor 5,5 kW with automatic motor brake, new R/L barrel Swivel angle of - 10 to 45 degrees electrically adjustable with mechanical indication Height adjustment electrically adjustable with mechanical display, fine tuning with the tip button Speeds 3000, 4500, 6000, 7000, and 10000 RPM Spindle diameter 30 mm Shaper fence with fine adjustment SCM aluminium top JAWS with three Einlegelinealen 3-roll feed Haffner variable speed 3-24 m / m... more
8
Serial No. 408119 Control Fraser-AMCA N56 Table size 60" x 48" / 1524mm x 1219mm Sub-table size 98" x 60" / 2489mm x 1524mm Table Longitudinal traverse (Y) 50" / 1270mm Table Cross traverse (X) 84" / 2134mm Head stock vertical traverse (Z) 62" / 1575mm Input 415/3/50 ac 18.5 kW Tjzpomn9 Spindle & facing speeds 1.45-280 rpm Spindle speeds 5.8-1120 rpm Feed rate 1.1mm-3360mm Per Minute Facing head diameter 26" / 660mm Facing head slide cross traverse 9.3/4" / 248mm Spindle traverse 36" / 914mm Sp... more
4
Mitsubishi HA100C permanent magnet AC servo motor with Tamagawa Seiki ATT-A-II encoder, serial number according to the photo, used, normal wear, 100% functional, included with com. photos Bcnnhh7ztl more
6

"Multi-spindle drilling machine" ELIND

Klipphausen, GermanyGermany dealership location
6821 km
1996
used
"Multi-spindle drilling machine ELIND Number of separate aggregates: 4 Boring spindles horizontal: 4 Gxdc8gbv0 Working width X mm: 1.500 Working depth Y mm: 600 Horizontal processing: Yes Boring stroke mm: 350 Positioning: electro-motive Boring feed: electro-motive Workpiece clamping: pneumatic Condition: good" more


ac spindle...
daily

New machines via email!

Stay updated!

to

to

Edit search
AC SPINDLE MOTOR
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close