High-speed radial drill

DONAU DR 32

Condition: ready for operation (used), Offered is a used Donau DR 32 rapid radial drilling machine series 731. Tool holder: MK4, spindle stroke: 200mm, outreach: approx. 900mm-1050mm, height adjustment: approx. 400-600mm, speed range: 40-2000rpm, feeds: 0.1/0.2/0.3/0.4mm per revolution, integrated coolant system, equipped with swiveling arm, large T-slot table, weight approx. 1500kg-1800kg, machine dimensions X/Y/Z approx. 1800mm/1000mm/2200mm. Inspection is possible by appointment. Njdpfx Ajykut Sjhvewc

Condition: used, bore capacity in steel (diameter) 40 mm throat 325 mm bore stroke 170 mm Nwodpfx Ahewn T A Ujvec table surface area 730 x 590 mm

Condition: good (used), functionality: fully functional, quill stroke: 190 mm, spindle speed (min.): 41 rpm, spindle speed (max.): 1,800 rpm, overall weight: 1,920 kg, workpiece weight (max.): 17 kg, sheet thickness steel (max.): 32 mm, torque: 250 Nm, table height: 900 mm, branded DONAU high speed radial drilling machine type DR 32 - completely overhauled by vaumatec in 2022 - with SPECIAL TABLE PLATE (clamping surface 1400 x 1000 mm with coolant channel and drain as well as 4 adjustable feet to relieve the table frame) Technical data: Drilling capacity into solid material: St 60/E335 mm Ø 32 (at feed rate 0.20 mm/rev): GG 22 mm Ø 45 Thread cutting: St 60/E355 M26 Thread cutting: GG22 M35 Tool holder: MK4 Column diameter: mm Ø 195 Distance between spindle nose and table: min./max. mm 260/660 Work table height: mm 900 Quill stroke: mm 190 Column stroke: mm 400 Spindle speeds Speed series I : rpm. 41-1800 Feed rates: mm/rev 0.1-0; 15-0; 20-0.3 Torque at the spindle: max. Nm 250 Smooth running of the boom: Radial N 25 Smoothness of the arm: Axial N 25 Clamping effect: Radial Nm 3500 Clamping effect: Axial N 5500 Feed force: N 7500 Max. permissible mass: kg 17 Max. permissible moment of inertia: kgm 0.002176 Workpiece: max. table load: kg 1000 Center of gravity: in the middle of the work surface Nwodsrn Riqepfx Ahvoc

Condition: refurbished (used), Year of construction: 1980, Worktable 500mm x 1200mm Arm travel 600mm Tool holder MK 4 Drilling capacity 32mm in steel Thread cutting device Coolant system Safety device at the drill Completely overhauled in 2026 Nwjdox N Ih Iepfx Ahvec

Condition: new, Year of construction: 2025, functionality: fully functional, Table size 800 x 240 mm Table area 730 x 210 mm “T” slot size on table 14 (M12) Speed ​​range 75 – 3200 rpm Drilling capacity in cast iron 45 mm Drilling capacity in steel 32 mm Longitudinal movement range (X) 560 mm Transverse movement range (Y) 190 mm Vertical travel range (Z) 350 mm Tool holders ISO40/Morze 4 Spindle - column distance 460 mm Distance between spindle nose and table surface 445 mm Spindle stroke 120 mm Total machine height in Z upper position 1450 mm Spindle can be tilted +/-90 degrees Spindle power 1.1/1.5 / 400V Machine weight 480 kgs Dimensions 1280 x 960 x 2100 mm Accessories - Thread cutting function - 3-way path measuring system - Y+Z axis covers - ISO40 drill chuck adapter - Built-in digital depth gauge - Automatic X-axis stepless feed and rapid traverse Nsdjxz D Npjpfx Ahvewc - Motorized gear lifting and lowering - Machine lamp - Cast iron machine base The machine is in brand new condition. Never used in production.

Condition: used, Year of construction: 1968, Donau high-speed radial drill type DR 32 Speed: 60 - 1800 rpm Arm reach: 600 mm Base plate: 100 x 1400 x 110 mm Thread cutting device Coolant system Nedpfx Ahsx Hgkvevowc Machine lamp Quick-change holder with inserts Machine vice

Condition: refurbished (used), Year of construction: 1983, Work table 600mm x 1200mm Arm travel 600mm Tool holder MK 4 Drilling capacity 32mm in steel Thread cutting device Coolant system Electrics 24V control voltage Emergency stop 2-channel Guard on the drill Nwodpfxomt Ed Re Ahvjc Completely overhauled 2025 12 months warranty New paint RAL 7035/7031

Condition: good (used), Year of construction: 2000, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine design - Work table 1800 x 600 mm with 4T-slots - Boom travel 1050 mm - SK 40 drilling spindle with tool clamping device - Infinitely variable speed programming - Infinitely variable quill feed via three-phase servo motor - 2 T-slots 18 mm on the machine base at the rear - 2 T-slots 18 mm on the left machine base frame Nedju Aa I Sopfx Ahvjwc - Thread cutting device - Central lubrication - Coolant device - Machine light - CE marking - Safety device - USB interface Dimensions and travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle bottom edge - min mm 70 Table top edge max. mm 680 Distance spindle bottom edge - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Worktable height mm 900 Cutting values Drilling capacity into solid St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100 % duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feed rates stepless mm/min 5 - 2000 Accuracy Positioning accuracy X-, Y-axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, easy to read from all sides legible from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental measurements, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining cycles Standard software options: Programming in dialog, 38 zero offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - Mediation of cast and flame-cut parts - Angular position detection for round parts by touching reference edges or surfaces Test graphics Graphic display of drilling patterns Data interfaces USB

Condition: good (used), Year of construction: 1979, Model making milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine, model making milling machine -Manufacturer: Zimmermann, universal milling machine type FZ 1 with extensive accessories -rotating cross table: 490 x 400 mm -Travel: X/Y/Z 320/385/430 mm -Spindle holder: SK30 -Drive: 1.1 kW -Speed: 560 to 14000 rpm, 8-stage -Accessories: incl. see photos -Dimensions: 1000/680/H1970 mm Nodpfxjnzpx Ro Ahvswc -Weight: 477 kg

Condition: new, Straightening press 150 tons with electric motor and additional manual operation by a hand lever pump, especially for fine work. Nwsdpfxof Sqcks Ahvjc Versions: 30t 60t 100t 150t 200t ᐳ 200 t: on request Special machines: on request New machine! We are also happy to build a customer-specific press for you. High quality hydraulic workshop press with 150 tons maximum pressing force. The press can also be opened and closed in the classic electric mode using a lever. For fine work (e.g. pressing in bearings, straightening, ...) the press also has a hand pump. This allows you to fine-tune the force manually. The printing cylinder is attached to a sliding carriage so that the cylinder can be moved sideways. In this way, you can make optimal use of the maximum stand passage width. Particularities: - 150 tons maximum pressing force - Pressure display with manometer - 2 operating modes: electrical operation or or manual operation - 2 independent hydraulic pumps - Control cabinet with motor protection monitoring and safety devices - adjustable passage height - Pull chains for easy adjustment of the passage height - massive machine frame - cylinder laterally adjustable (mounted on sliding carriage) The press can be tested under power on site. ----- Numerous other workshop presses in different designs, sizes and with optional additional equipment available! 30, 60, 100, 150, 180, 200 tons. ----- Please just contact us, we will be happy to advise you without obligation. The stated price is net plus 19% VAT. All statements without guarantee! Europe-wide delivery possible! ----- The European Commission provides a platform for out-of-court online dispute resolution (OS platform). The offer serves exclusively as an internet presentation of our goods. The contract negotiation comes about by means of telecommunication (email, fax, telephone, news portal), where we first make you a non-binding offer, in which we inform you about our general terms and conditions and the right of withdrawal with imprint before the purchase / contract is concluded. Please just contact us, we will be happy to advise you without obligation.